View
216
Download
2
Category
Preview:
Citation preview
NeSSI™ Connectivity Discussion
Pico (M8 Ø8) Euro (M12)Style Style
Snap-on SpeedLockScrew-on Screw-on
Wire size & pins Wire size & pinsReceptacles Receptacles
PCB PCB Leaded Leaded
Right RightStraight Straight
Daisy Chain Daisy Chain
Junction Junction
Pico (M8 Ø8)2-wire + drain wire 24AWG, foil shield
4A 125VAC/VDC (Pin rating)(other pin and wire configurations possible but not
relevant to FF)
StyleØ8 - Snap-on (minimal applications at less than 0°C)
Snaplock material POM (nylon)Overmold body – PUR
M8 - Screw-on Collars – Nickel platted brass, or 316SS
Overmold body – PUR
(M8 Ø8) Available in Right or Straight body
Note: a new pin convention and wire standard would be required by FF
Female Picofast® fieldwireable connector
Male Picofast® PCB right angle connector Male Picofast® straight leaded end connector
Eurofast® M12 (Pin convention already established by FF)2-wire + drain wire 18AWG, foil shield
2-wire + drain wire + local ground wire 18AWG, foil shield
2-wire + drain wire 24AWG, foil shield2-wire + drain wire + local ground
wire 24AWG, foil shield
StyleM12 – Speedlock® (Being release now, no experience at low temperatures – will be backward compatible)M12 - Screw-on Collars – Nickel platted brass, or 316SS
Overmold body – PUR
Note: a new wire standard would be required by FF for 24AWG
Female Eurofast® fieldwireable connector
Male Eurofast® PCB right angle connector Male Eurofast® straight leaded end connector
Daisy Chain Eurofast®
2-wire + drain wire 24AWG, foil shield2-wire + drain wire + local ground wire 24AWG, foil shield
VBRSplitter Body
2-wire + drain wire 18AWG, foil shield 2-wire + drain wire + local ground wire 18AWG, foil shield or
2-wire + drain wire 24AWG, foil shield2-wire + drain wire + local ground wire 24AWG, foil shield
VB2Splitter Body
Recommended