View
33
Download
1
Category
Preview:
Citation preview
Edition 01 | December 2019
PERI (Hong Kong) limitedFormwork Scaffolding Engineering19C&D, Tower B, Billion Centre1 Wang Kwong RoadKowloon BayHong KongTel. +852 3102 7900Fax +852 3102 9258info@perihk.comwww.perihk.com
PERI Trading (Shanghai) Co., Ltd.派利贸易(上海) 有限公司Room 1223, Main BuildingNo. 580 West nan Jing RoadJing An DistrictShanghaiTel. +86 21 6032 2016info@peri.net.cnwww.peri.net.cn
Important notes
All current safety regulations and guidelines must be observed in those countries where our products are used.
The photos shown in this brochure feature construction sites in progress. For this reason, safety and anchor details in particular cannot always be considered as conclusive or final. These are subject to the risk assessment carried out by the contractor.
In addition, computer graphics are used which are to be understood as system representations. For ensuring a better understanding, these and the detailed illustration shown have been partially reduced to certain aspects. The safety installations which have possibly not been shown in these detailed descriptions must nevertheless be available.
The systems or items shown might not be available in every country.
Safety instructions and load specifications are to be strictly observed at all times. Separate structural calculations are required in case of changes and deviations.
The information contained herein is subject to technical changes in the interests of progress. Errors and typographical mistakes reserved.
Contents
PS100 Shoring System
PS100 Shoring System
PS100 Shoring System
Technical Data
Introduction
Parts
Features
Components
4
5
6
9
4
NEW PS100 Shoring SystemStable and flexible shoring system with high load-bearing capacity
Ideal for deep slabs & bridge deck construction ■ Permissible load up to 100kN per leg ■ Any height requirement is realized ■ Heavy Duty Spindles with high-load extensions ■ Compatible with other PERI systems for access
and safety requirement ■ Modular system with optimal adaptability
The PS100 ground plan is avaiable in dimension of 50cm up to 2.5m in 50cm increments.
6
Ledger with “Gravity Lock”Fast, simple and safe
The gravity lock allows easy and safe assembly.
When inserting the wedge head into the connector, the wedge drops through the force of gravity into the hole and locks.
The wide contact point of the ledger, on the connector, results in a “knee-brace” type connection, which optimises the load bearing capacity of the system.
The rectangular, light-weight shape of the ledger, allows the operative to comfortably carry up to 4 pieces at the same time.
This same profile of the ledger prevents the assembly of tubes and couplers to parts not suitable.
The ledger can be easily in-stalled from a safe position. The wedge drops by gravity and secures automatically.
Gravity lock, the self-secur-ing ledger connection, rigidly connects the ledger to the connector.
PS100 Ledger allows multiple braces for high-load conditions.
Additional holes in PS100 Ledgers allow the installation of double parallel braces depending on load requirements.
7
PS100 Rosette Connector:
It combines a base standard, spigot and nodal connecting ring, all into one piece.
As a base standard
It is directly installed on the PS100 Spindle which allows simple setting out by one person.
As a spigot
It facilitates the connection of vertical standards, end on end, transferring the full load from top to base.
As a node
■ Circular holes are designed for brace connection to the rosette.
■ Also, the wide contact point of the ledgers optimize the load bearing capacity with a “knee-brace” type connection.
PS100 Rosette - a versatile connectionHigh adaptivity through high rigidity
8
System upgradedAccelerated working operations
The PS100 Spindle optimizes the installation process.
■ Permissible extension up to 750mm ■ Compatible as both top and bottom spindle ■ Doubled thread with wider angle for better striking distance
per 360º rotation ■ Brace connections to fix bracing for high load with long
extensions ■ Unique centering tube, which eliminates any possibility of
eccentric load passing from the standard into the spindle ■ Easy handling and fixing
Diagonal (telescopic) is connected to the Spindle at high-load requirement.
The spindle also serves as a top spindle, when paired with the 90mm forkhead
All corners are chamfered with multiple holes for ground fixing.
500m
m
1000
mm
1500
mm
60mm Dia. Vertical members ■ Simplistic design allows for quick and
easy installation ■ Quick fixing for crane-lifting
90mm Forkhead ■ Use with all primary members from
90mm or higher
9
PS100 Shoring SystemItem no.
200502
200501
200534
200503200504
2.730
3.860
12.610
5.5008.280
0.500
0.307
1.260
1.0001.500
PS100 Vertical 500PS100 Vertical
PS100 Connector
PS100 Spindle
PS100 Vertical 1000PS100 Vertical 1500
Note
Note
Note
Length mWeight kg
10
PS100 Shoring SystemItem no.
200505
200510
200511
200506
200508200507
200509
2.100
0.080
3.890
3.420
6.0404.730
7.400
0.5001.000
2.0001.500
2.500
PS100 Horizontal 500PS100 HorizontalX
PS100 Omega Clip
PS100 Fork Head
PS100 Horizontal 1000
PS100 Horizontal 2000PS100 Horizontal 1500
PS100 Horizontal 2500
Note
Note
Note
Length mWeight kg
My+
My-
Nx
Vz+
Vz-
+
+
+
+
+
_
_
_
_
_
Bending moment My
My,Rd = 93.3 kNcmMy,Rd = 89.1 kNcm
Normal Force Nx
NRd = 24.7 kN
Ledger Shear Force Vz
Mz,Rd = 30.4 kNMz,Rd = 13.4 kN
11
PS100 Shoring SystemItem no.
200512
200524
6.430 6.430
200517 6.430 6.430
200513
200525
4.620 4.620
200518 6.430 6.430
200515 6.430 6.430
200520 6.120 6.430
200522 5.950 6.430
200514
200526
6.430 6.430
200519 6.430 6.430
200516 6.430 6.430
200521 6.120 6.430
200523 5.620
Mounted in the holes of the PS100 HorizontalsSize of the Diagonal is measured horizontal/vertical.
Mounted in the holes of the PS100 Horizontals and Spindle
6.430
2.680
5.230
5.340
3.570
6.540
5.000
3.810
6.230
6.620
4.640
8.940
5.500
4.450
6.230
7.230
PS100 Diagonal 1000/500
PS100 Spindle Diagonal 1000
PS100 Diagonal 1500/1500
PS100 Diagonal
PS100 Spindle Diagonal
PS100 Diagonal 1000/1000
PS100 Spindle Diagonal 1500
PS100 Diagonal 2000/500
PS100 Diagonal 1500/500
PS100 Diagonal 2000/1500
PS100 Diagonal 2500/1000
PS100 Diagonal 1000/1500
PS100 Spindle Diagonal 2000-2500
PS100 Diagonal 2000/1000
PS100 Diagonal 1500/1000
PS100 Diagonal 2500/500
PS100 Diagonal 2500/1500
Compression Perm. kN(-) Tension Perm. kN(+)
Note
Note
Weight kg
12
PS100 Shoring SystemItem no.
Gross Area 33.06 cm²EI, Flexural Rigidity 1468 kNm²
Bending Moment (Max.) 25 kNmGA, Shear Rigidity 35110 kN
Bearing Capacity(intermediate – 220mm)
120 kN
15.10
40.30
20.10
45.30
25.20
60.40
80.50
22.70
50.30
30.20
70.50
1.800
4.800
2.400
5.400
3.000
7.200
2.700
6.000
3.600
8.4009.600
AB225, 1800
Fork Head to AluBeam 225 Connection
AB225, 4800
AluBeam 225
AB225, 2400
AB225, 5400
AB225, 3000
AB225, 7200
AB225, 9600
AB225, 2700
AB225, 6000
AB225, 3600
AB225, 8400
Properties
Note
Note
Weight kg Length m
L200716
200721
200717
200722
200719
200724
200726
200718
200723
200720
200725
13
Gross AreaWeight
20.91 cm²5.72 kg/m
EI, Flexural Rigidity 860 kNm²Shear Force (Perm.)
Bending Moment (Perm.)36 kN
10 kNm
Properties
PS100 Shoring SystemItem no.
5.72
0.280
15.24
7.62
17.15
28.58
11.43
20.96
32.39
24.77
36.20
9.53
19.05
30.48
13.34
22.86
34.29
26.67
38.10
0.910
2.410
1.210
2.710
4.510
1.810
3.310
5.110
1.510
3.010
4.810
2.110
3.610
5.410
3.910
5.710
4.210
6.010
AB200, 90
AluBeam Clamp
AB200, 240
AluBeam 200
AluBeam 225 (Primary)to AluBeam 200 (Secondary)
AB200, 120
AB200, 270
AB200, 450
AB200, 180
AB200, 330
AB200, 510
AB200, 390
AB200, 570
AB200, 150
AB200, 300
AB200, 480
AB200, 210
AB200, 360
AB200, 540
AB200, 420
AB200, 600
Note
Note
Weight kg
LLength m
200727
200745
200732
200728
200733
200739
200730
200735
200741
200737
200743
200729
200734
200740
200731
200736
200742
200738
200744
The optimal System and Service for every Project and every Requirement
Wall Formwork
Beam and Slab Support Tunnel Formwork Bridge Formwork
BIM Services
Scan to experiencePS100 Virtual Reality(VR)
Scan to playPS100 Animation
Access Scaffold
Column Formwork
PERI (Hong Kong) limitedFormwork Scaffolding Engineering19C&D, Tower B, Billion Centre1 Wang Kwong RoadKowloon BayHong KongTel. +852 3102 7900Fax +852 3102 9258info@perihk.comwww.perihk.com
PERI Trading (Shanghai) Co., Ltd.派利贸易(上海) 有限公司Room 1223, Main BuildingNo. 580 West nan Jing RoadJing An DistrictShanghaiTel. +86 21 6032 2016info@peri.net.cnwww.peri.net.cn
Recommended