View
11
Download
0
Category
Preview:
Citation preview
ENGINE
Horsepower (HP) / Make 33.5 HP* Caterpillar Diesel
Power Take Off (PTO) Electric
Cylinders 3
Starting Electric
Fuel Capacity 56.8L
DECK
Cutting Width 183cm (72”), 155cm (61”) side or rear
Cutting Height 3.8 - 15.2cm (1.5 - 6”)
Deck Construction iCD™ Cutting System; Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Hercules™ Cast-iron Greasable
SUSPENSION & DRIVE TRAIN
Suspension 4-wheel independent
Transmission Hydro-Gear® Pumps with remote oil cooler and Wheel Motors
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 26 x 12” x 12”
Caster Tyres 13 x 6.5”
CONSUMER SELLING POINTS
Fully Independant Suspension with dual rear A-arms for speed, comfort, longevity and leading cut quality
Reknowned Caterpillar™ Diesel Engine Power and Longevity
Hydraulic Deck Lift for ease of use
Cup holder, mobile phone pocket, 12-volt outlet and storage compartment
TECHNICAL SELLING POINTS
Hercules™ Spindles, 10 1/4” cast iron housing, 1 1/4” shaft, fully greasable tapered roller bearings, grease pressure relief valve
New models have revised Transmission oil cooler and wheel motors for cooler running
Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Dual A section transmission drive belts for longevity
Ride-On IS® 5100Z
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-19.3 km/h
Speeds-rev. 0-9.5 km/h
DIMENSIONS
Overall Length 221cm
Overall Width (Deflector up) 188cm (72”) /161cm (61”)
Dry Weight 1006 kgs
COMFORT & SAFETY
Seat Package Premium High Back
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Visual water temperature gauge, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Mulch kit, Flat-free caster tyre
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 36 HP* Vanguard
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 42L
DECK
Cutting Width 183cm (72”), 155cm (61”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Hercules™ Cast-iron Greasable
SUSPENSION & DRIVE TRAIN
Suspension 4-wheel independent
Transmission Hydro-Gear® Pumps with remote oil cooler and Wheel Motors
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 24 x 12” x 12”
Caster Tyres 13 x 6.5”
CONSUMER SELLING POINTS
Fully Independant Suspension with dual rear A-arms for speed, comfort, longevity and leading cut quality
Choice of 36HP* Vanguard™ V-Twin power Made in Japan or 30HP† Commercial Turf™ with cyclonic air filter
Cup holder, storage compartment and visible fuel gauge
Increased cutting speed to maximise efficiency
TECHNICAL SELLING POINTS
Hercules™ Spindles, 10 1/4” cast iron housing, 1 1/4” shaft, fully greasable tapered roller bearings, grease pressure relief valve
New models have revised Transmission oil cooler and wheel motors for cooler running
Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Dual A section transmission drive belts for longevity
Ride-On IS® 3100Z
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-19.3 km/h
Speeds-rev. 0-9.5 km/h
DIMENSIONS
Overall Length 206cm
Overall Width (Deflector up) 188cm (72”) /161cm (61”)
Dry Weight 635 kgs
COMFORT & SAFETY
Seat Package Premium High Back
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 3 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 24 HP* Yanmar Diesel
Power Take Off (PTO) Electric
Cylinders 3
Starting Electric
Fuel Capacity 42L
DECK
Cutting Width 155cm (61”) side discharge, 132cm (52”) side or rear
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Cast Iron Greasable on 61”, Heavy Cast-Aluminium Greasable on 52”
SUSPENSION & DRIVE TRAIN
Suspension 4-wheel independent
Transmission Hydro-Gear® Pumps with remote oil cooler and Hydro-Gear® Wheel Motors
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 22 x 11 x 10” (61”), 22 x 10 x 10” (52”)
Caster Tyres 13 x 5”
CONSUMER SELLING POINTS
Fully Independant Suspension system for speed, comfort, longevity and leading cut quality
Rugged Reliable Yanmar Diesel power, longevity and refinement
Cup holder, storage compartment and visible fuel gauge
iCD™ cutting deck is mounted to each suspension arm for speed and quality of cut
TECHNICAL SELLING POINTS
61” model has heavy duty 8” cast iron housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Transmission oil cooler and wheel motors for cooler running
Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Dual A section transmission drive belts for longevity
Ride-On IS® 2500Z
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-16 km/h
Speeds-rev. 0-8 km/h
DIMENSIONS
Overall Length 206cm
Overall Width (Deflector up) 161cm (61”)/ 138cm (52”)
Dry Weight 718 kgs
COMFORT & SAFETY
Seat Package Premium
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Visual water temperature gauge, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 27 HP* Commercial Turf™ (52”) or 32 HP† (61”) Vanguard
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 42L
DECK
Cutting Width 155cm (61”), 132cm (52”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Cast Iron Greasable on 61”, Heavy Cast-Aluminium Greasable on 52”
SUSPENSION & DRIVE TRAIN
Suspension 4-wheel independent
Transmission Hydro-Gear® Integrated ZT5400 Commercial Transmissions
Drive Axles 3.4cm (1.375”) Tapered
Drive Tyres 22 x 11 x 10” (61”), 22 x 10 x 10” (52”)
Caster Tyres 13 x 5”
CONSUMER SELLING POINTS
Fully Independant Suspension system for speed, comfort, longevity and leading cut quality
Cyclonic Filter in-built into the proven Commercial Turf™ V-Twin
Cup holder, storage compartment and visible fuel gauge
iCD™ cutting deck is mounted to each suspension arm for speed and quality of cut
TECHNICAL SELLING POINTS
61” model has heavy duty 8” cast iron housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Commercial Grade Hydrogear® ZT5400 Integrated transmissions, eliminates the need for hydraulic hoses
Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Ride-On IS® 2100Z
Similar to model shown.
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-16 km/h
Speeds-rev. 0-8 km/h
DIMENSIONS
Overall Length 206cm
Overall Width (Deflector up) 161cm (61”)/ 138cm (52”)
Dry Weight 544 kgs
COMFORT & SAFETY
Seat Package Premium
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 23 HP* Kawasaki FS Series OR 27 HP† Commercial Turf™
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 21L
DECK
Cutting Width 132cm (52”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Heavy Cast-Aluminium Greasable
SUSPENSION & DRIVE TRAIN
Suspension Active Performance Suspension
Transmission Hydro-Gear® Integrated ZT3400 Commercial Transmissions
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 22 x 11 x 10”
Caster Tyres 13 x 5”
CONSUMER SELLING POINTS
Patented Suspension Technology for speed, comfort, longevity and improved cut quality
Choice of Proven Commercial Turf™ or Kawasaki™ V-Twin Power
Cup holder, storage compartment and visible fuel gauge
iCD™ cutting deck is mounted to the rear suspension arms for speed and quality of cut
TECHNICAL SELLING POINTS
Heavy duty cast aluminium thick walled housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Commercial Grade Hydrogear® ZT3400 Integrated transmissions, eliminates the need for hydraulic hoses
Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Ride-On IS® 700Z
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-16 km/h
Speeds-rev. 0-8 km/h
DIMENSIONS
Overall Length 206cm
Overall Width (Deflector up) 138cm (52”)
Dry Weight 480 kgs
COMFORT & SAFETY
Seat Package Contour
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 25 HP* Commercial Turf™
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 21L
DECK
Cutting Width 122cm (48”), 112cm (44”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners, iCD™ Cut-ting System on 48”
Spindles Heavy Cast-Aluminium Greasable
SUSPENSION & DRIVE TRAIN
Suspension Active Performance Suspension
Transmission Hydro-Gear® Integrated ZT3400 Commercial Transmissions
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 22 x 10 x 10”
Caster Tyres 13 x 5”
CONSUMER SELLING POINTS
Patented Suspension Technology for speed, comfort, longevity and improved cut quality
Cyclonic Filter in-built into the proven Commercial Turf™ V-Twin
Cup holder, storage compartment and visible fuel gauge
Cutting deck is mounted to the rear suspension arms for speed and quality of cut
TECHNICAL SELLING POINTS
Heavy duty cast aluminium thick walled housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Commercial Grade Hydrogear® ZT3400 Integrated transmissions, eliminates the need for hydraulic hoses
Oversize pulleys on the cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Ride-On IS® 600Z
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-16 km/h
Speeds-rev. 0-8 km/h
DIMENSIONS
Overall Length 203cm
Overall Width (Deflector up) 130cm (48”)/ 119cm (44”)
Dry Weight 433 kgs
COMFORT & SAFETY
Seat Package Contour
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 28 HP* Vanguard
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 21L
DECK
Cutting Width 155cm (61”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Heavy Cast-Aluminium Greasable
SUSPENSION & DRIVE TRAIN
Suspension Nil
Transmission Hydro-Gear® Integrated ZT5400 Commercial Transmissions
Drive Axles 3.4cm (1.375”) Tapered
Drive Tyres 24 x 12 x 12”
Caster Tyres 13 x 6.5”
CONSUMER SELLING POINTS
Heavy duty 7 gauge chassis rails, wide chassis based on the IS3100, class leading value for money
28HP* Vanguard™ V-Twin power Made in Japan - 3YR Commercial Warranty
Cup holder, storage compartment and visible fuel gauge
Replaceable oil filters and overflow reservoirs fitted to the Commercial Grade transmissions
TECHNICAL SELLING POINTS
61” model has heavy duty 8” cast iron housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Commercial Grade Hydrogear® ZT5400 Integrated transmissions, eliminates the need for hydraulic hoses
Oversize pulleys on theiCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Ride-On F200XT®
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-16 km/h
Speeds-rev. 0-8 km/h
DIMENSIONS
Overall Length 198cm
Overall Width (Deflector up) 161cm (61”)
Dry Weight 531 kgs
COMFORT & SAFETY
Seat Package Premium
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 3 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 25 HP* Commercial Turf™
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 21L
DECK
Cutting Width 132cm (52”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Heavy Cast-Aluminium Greasable
SUSPENSION & DRIVE TRAIN
Suspension Nil
Transmission Hydro-Gear® Integrated ZT3400 Commercial Transmissions
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 22 x 10 x 10”
Caster Tyres 13 x 5”
CONSUMER SELLING POINTS
Heavy duty 11 gauge chassis rails, class leading value for money
Cyclonic Filter in-built into the proven Commercial Turf™ V-Twin
Cup holder, storage compartment and visible fuel gauge
Replaceable oil filters and overflow reservoirs fitted to the Commercial Grade transmissions
TECHNICAL SELLING POINTS
Heavy duty cast aluminium thick walled housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Commercial Grade Hydrogear® ZT3400 Integrated transmissions, eliminates the need for hydraulic hoses
Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Ride-On F125XT®
Similar to model shown.
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-16 km/h
Speeds-rev. 0-8 km/h
DIMENSIONS
Overall Length 198cm
Overall Width (Deflector up) 138cm (52”)
Dry Weight 517 kgs
COMFORT & SAFETY
Seat Package Contour
Rollover Protection Standard
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
ENGINE
Horsepower (HP) / Make 18.5 HP* Kawasaki FX Series (36”) OR 25 HP† Commercial Turf™ (44”, 48”)
Power Take Off (PTO) Electric
Cylinders V-Twin
Starting Electric
Fuel Capacity 15L
DECK
Cutting Width 122cm (48”), 112cm (44”), 91cm (36”) side discharge
Cutting Height 3.8 - 12.7cm (1.5 - 5”)
Deck Construction 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners
Spindles Heavy Cast-Aluminium Greasable
SUSPENSION & DRIVE TRAIN
Suspension Nil
Transmission Hydro-Gear® Integrated ZT3100 Commercial Transmissions
Drive Axles 3.2cm (1.25”) Tapered
Drive Tyres 20 x 10 x 10” (48”), 20 x 8 x 10” (44”), 20 x 7 x 10” (36”)
Caster Tyres 11 x 4.5”
CONSUMER SELLING POINTS
Heavy duty 11 gauge chassis rails, vibration dempening floor pan, best value for money in class
Choice of Proven Commercial Turf Series™ or Kawasaki™ V-Twin Power
Cup holder, storage compartment and visible fuel gauge
Replaceable oil filters and overflow reservoirs fitted to the Commercial Grade transmissions
TECHNICAL SELLING POINTS
Heavy duty cast aluminium thick walled housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve
Commercial Grade Hydrogear® ZT3100 Integrated transmissions, eliminates the need for hydraulic hoses
Oversize pulleys on the cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection
Ride-On F50XT®
Product Guide - Dealer Version 2014
GROUND SPEED
Speeds-fwd. 0-12.8 km/h
Speeds-rev. 0-6 km/h
DIMENSIONS
Overall Length 175cm (36”) 185cm (44-48”)
Overall Width (Deflector up) 130cm (48”)/ 119cm (44”)/ 94cm (36”)
Dry Weight 328 kgs
COMFORT & SAFETY
Seat Package Contour
Rollover Protection Not Available
Instrumentation Fuel level gauge in tank, Hour meter
Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit
Parking Brake / Safety Circuit Disc
OPTIONAL EXTRAS
Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit
WARRANTY†
Engine 2 Year Manufacturer’s Warranty (Commercial Use)
Transmission 2 Year Manufacturer’s Warranty
Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads
† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.
Product Guide - Dealer Version 2014
Recommended