Specifications - MoenSpecifications DESCRIPTION • Chrome plated metal construction OPERATION •...

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c ­i ­f i ­c a ­t i o n s

Rev. 11/14

There is more than 1 version of this model. Page down to identify the version you have.

2" (50mm)

2-7/8" (73mm)

2" (50mm)

ESCUTCHEON DIA. 6-7/16" x 2-1/2"

(164mm x 64mm)

7-1/8" (181mm)

10-1/2" (267mm)

4-9/16" (116mm)

COLD 1/2" NPT INLET

HOT 1/2" NPT INLET

1"(25mm) MAX. DECK THICKNESS

MOEN®Two-Handle Bar Faucet

Models: 4903 series

NOTE: Designed to be installed through2 - 1” min. dia. holes 4” on center

DESCRIPTION• Metal construction with various finishes identified by suffixOPERATION• Mini blade style handles with hot and cold color indicators• Inlet shanks will accept 3/8” ball nose connectionsFLOW• Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psiCARTRIDGE• 1224 cartridge designSTANDARDS • Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1and all applicable requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal SafeDrinking Water Act

• ADA for lever handle

WARRANTY• Lifetime limited warranty against leaks, drips and finish defects

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c ­i ­f i ­c a ­t i o n s

DESCRIPTION• Chrome plated metal constructionOPERATION• Small lever styleFLOW• Aerator is limited to 2.0 gpm (7.6 L/m)CARTRIDGE• 1224 cartridge designSTANDARDS• Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1

• Certified to ANSI/NSF 61/9• Complies with California Proposition 65 and with the Federal SafeDrinking Water Act

WARRANTY1• Lifetime limited warranty against leaks, drips and finish defects

MOEN®Two Handle Bar Faucet

Model: 4903, *87903

Bulk Model: *64904(Bulk packed 12 per carton)

*64904, 87903 Discontinued 2/1/2004

ADA

2"(51mm)

3-1/8"(79mm)

ESCUTCHEON

6-3/4" (171mm) x 2-3/8" (60mm)�

HOT INLET� COLD INLET�

6"(152mm)

3/4" (19mm)

MAX. DECK

THICKNESS�

8"(203mm)

2"(51mm)

3-1/4"(82mm)

Rev. 12/03

NOTE: DESIGNED TO INSTALLTHRU 2 HOLES 1" (25mm) MIN. DIA. AND 4" (102mm) ON CENTER