View
229
Download
0
Category
Preview:
Citation preview
Sum
mit
Bra
ke L
athe
Acc
esso
ries
Carbide Cutting TipsLathe Brand Picture Description For Use On:
Accu-TurnPA/060-10
Accu-Turn Style Positive Rake Bit For Disc, Drum & Flywheel Lathes
Pack Of 10
8911 89228944 89898991 8993
AmmcoPA/062-10
Ammco Style Negative Rake Bits For Disc & Drum Lathes
Pack Of 10
1000 10013000 40004100 7000
Pro-CutPA/069-10
Pro Cut Style Positive Rake Bits For On Car LathesPack Of 10
PFM 9.0PFM 9.2
Hunger & Ammco
PA/070-10
Hunger & Ammco Carbide Cutting Tips
Pack Of 10
Hunger E326aAmmco 3850Ammco 6900
FMC, JBC & West
PA/407-10
FMC/JBC/West Positive Rake Bits For Disc & Drum Lathes
Pack Of 10
FMC 400 - 700&
West 1115
Silencer Bands For Solid Rotors
Silencer Bands For Vented Rotors
Large Silencer BandSolid Disc
229 mm DiameterPA/94
Hollow latex tube with noise reducing material inside.
Small Silencer BandSolid Disc
152 mm DiameterPA/96
Large Silencer BandVented Disc
229 mm DiameterPA/935
Latex tubing with internal weights inside the band for effective vibration dampening.
Small Silencer BandVented Disc
178 mm DiameterPA/936
Adaptor Specifications
2 x Bell Clamp 165 mm OD
1 x Centering Cone 94 - 133 mm
1 x Centering Cone 115 - 140 mm
1 x Double Tapered Collet 71 - 81 mm
1 x Double Tapered Collet 81 - 90 mm
1 x Mounting Spring -
To Suit Off-Car Brake Lathes With 1” Arbor.
PA/41-1
E & OE
Chatter Depressing Silencers Silencer Band For DrumsThese Chatter Depressing Silencers are
designed to reduce chattering when machining rotors.
Pro-CutDesigned specifically for
Pro-CutPA/71B
StandardFor on & off car
brake lathesPA/70B
Drum Silencer Band For Cars & 4WDNatural Rubber With Riveted Buckle
Size:182 cm Long4.5 cm Wide
PA/80B
Hubless Rotor Adaptors
Light Commercial Adaptor Kit
Designed for the fast & accurate mounting of hubless rotors.
Perfect for Off-Car brake lathes.d
Kits available for passenger vehicles & light commercials.
For Passenger VehiclesPA/91
For Passenger Vehicles & Light Commercial
PA/91LTS
This kit assists in the correct mounting of disc’s & drums for 4WD & light commercial vehicles.
Summit Brake Lathe Accessories
Centering Cone Specifications
No.1 Centering Cone 54 - 82 mm
No.2 Centering Cone 80 - 108 mm
No.3 Centering Cone 105 - 133 mm
No.4 Centering Cone 130 - 157 mm
No.1
No.2No.1
No.2No.3
No.4
Unit 4 / 36 Peachtree RoadPenrith, New South Wales, 2750
www.autoquip.com.auAutoquip Australia
Phone: 02 4721 0633 Fax: 02 4721 0733
Recommended