View
215
Download
0
Category
Preview:
Citation preview
Tapas de cierre y juntas USITEnd-Caps and Usit-Rings
Tapa de cierre | End-Cap
Junta USIT | Usit-Ring
Tapas de cierre | End-Caps
Juntas USIT | Usit-Rings
Vista rápida de materiales seleccionados | Material choice at a glance
Índice | Contents
Tapas de cierre y juntas USIT End-Caps and Usit-Rings
ttv BEST PARTNER – SEALING · BEARING
Siempre que necesite tecnología de sellado y de cojinetes deslizantes o necesite respuestas a sus consultas técnicas...
¡Estamos a su lado! Competentes, de confianza y rápidos.
Wherever you are or whenever you are in need of sealing and bearing technology or whether you need to clarify a technical question …
We are here for you! Qualified, reliable and fast!
Las tapas de cierre ttv se utilizan en orificios de carcasas y en orificios de árboles o ejes. Como especialista en tecnología de sellado y cojinetes deslizantes, ttv le ofrece la solución perfecta para cualquier exigencia técnica.
Ya sean tapas de cierre estándar en variantes parcial o completamente engomadas o diseños especiales, ttv es sinónimo de la tecnología más moderna y los mejores materiales.
Las juntas USIT de ttv se ofrecen en acero normal o acero inoxidable¬ y fabricadas de NBR/FPM/EPDM de forma estándar. Distintos diseños del cuerpo de goma aseguran la aplicación que usted le quiera dar.
Asegure el correcto funcionamiento de su aplicación y una larga vida útil de su maquinaria con tapas de cierre y juntas USIT ttv.
Cuando necesite asistencia con sus aplicaciones individuales o surjan consultas técnicas, el equipo de ttv BEST PARTNER se alegrará de asesorarle. Tel.: +49 (0) 7303 - 92874 - 0 · E-Mail: info@ttv-gmbh.de
ttv End-Caps are used to seal holes and boreholes in housings or apertures for shaft and axis inputs. As a specialist in sealing and bearing technology, we also offer perfect solutions for these technical requirements.
Whether you require standard End-Caps, whole or partially gummed variants or custom designed, we use the latest technology and the best materials.
ttv Usit-Rings are offered as standard screw gasket seal in carbon steel or stainless steel and in NBR/FPM/EPDM. Our varied supply of rubber body designs ensure your application.
It secures the function and longevity of your machine using End-Caps and Usit-Rings from ttv.
For specialised applications and for technical questions the ttv BEST PARTNER Team will gladly advise you personally. Tel. : +49 (0) 7303 - 92874 - 0 · Email: info@ttv-gmbh.de
Queda reservado el derecho de modificación de la oferta informativa y de cualquier contenido por motivo de nuevas informaciones, resultados de investigación y desarrollo, sin que se indique previamente por
separado. ¡Errores de imprenta y similares sujetos a cambio sin aviso previo! | Information /content is subject to change without notice due to new information, research, and developments. Printing errors and
mistakes reserved!
d d
Tapas de cierre End-Caps
Diseño VK
Las tapas de cierre se componen de una pieza metálica (chapa embu-tida) y una camisa de elastomero en la parte exterior. Se utilizan para el cierre de aberturas y orifi cios y sustituyen en la construcción de engranajes las bridas de unión u otras tapas.
Las tapas de cierre están sobre-dimensionadas en su diámetro exterior conforme a la norma DIN 3760 de forma que la instalación se realiza a presión en orifi cios de juntas sellantes para alojamientos de rodamiento.
Ventajas de esta tapa de cierreCompensación de dilatación térmica• Sin riesgo de corrosión por fricción• Protección efectiva de entrada de aire con suciedad• Montaje sencillo en semi-carcasas • junta estática de coste económico
Type VK
End-Caps consist of a metal-component (deep-drawing sheet metal) and of a rubber sleeve on the outside. They are used to close apertures and core drilling holes. In engineering they often replace terminal fl anges or lids.
In accordance with DIN 3760 the End-Caps have an excess on the outer diameter corresponding with size, so that the prefabricated plummer block-gasket sealing-drillings and press fi t is achieved.
Advantages of the End-Cap• compensation of thermal expansion• no risk of frictional corrosion• effective airtight protection against grease or dirt • mounting possibilities for split casings• low-cost static sealing
Diseño VK H+H
Como alternativa a las tapas de cierre estándar ponemos a su disposición tapas 250-50”, engomadas parcialmente por el exterior de la camisa.
Ventajas especiales de este nuevo concepto• excelente sellado estático (sin efecto pop-out)• colocación perfecta en el orifi cio de la carcasa• buenas propiedades termodinámicas• alta estabilidad ante la presión
Type VK H+H
As an alternative to the standard End-Cap there is the „half and half” End-Cap, which is only partly rubberized on the outer sheath.
Special advantages of this new development• good static sealing (no pop-out effect)• non-positive fi t to the case drilling• good thermal conduction• higher pressure stability
D D
D D
B
B
Además ofrecemos varias soluciones especiales, como p. ej. juntas con orifi cios o aberturas de ventilación.
Additionally we offer a variety of special solutions, such as with a hole or a vent hole.
Juntas USIT Usit-Rings
Las juntas USIT se denominan también junta de tornillo p junta de unión de brida. Se componen de una arandela metálica, plana y un saliente de goma en el lado interior y/o exterior. La arandela metálica puede suministrarse en acero y/o en acero inoxidable, y el saliente de goma en NBR o en Vito.
Nuestra gama de distintas dimensiones está disponible tanto en pulgadas como en sistema métrico.
Usit-Rings are commonly referred to as screw gasket seals or flange connection seals. They consist of a flat, metallic disc and a rubber bulge on the inside or outside. The metallic disc is available in both steel and stainless steel, the rubber seal can be delivered in either NBR or even Viton.
Our range of dimensions offers both metric as well as inch sizes.
Vista rápida de materiales seleccionados
Material choice at a glance
Material Raw material
Denominación breve Designation
Rango de temperatura Temperature range
Caucho al nitrilo-butadio
Nitrile butadiene rubberNBR 70 − 30 °C +100 °C
Caucho al flúor
Fluoric rubberFPM 70 − 20 °C +180 °C
Material Raw material
Denominación breve Designation
Rango de temperatura Temperature range
Caucho al nitrilo-butadio
Nitrile butadiene rubberNBR 70 − 30 °C +100 °C
Caucho al flúor
Fluoric rubberFPM 70 − 20 °C +180 °C
Caucho al etileno-propileno-dieno
Ethylen-Propylen-Dien-KautschukEPDM 70 − 40 °C +150 °C
Acero
SteelAISI 1020
Acero inoxidable
Stainless steelAISI 304 / AISI 316
Tapas de cierre End-Caps
Juntas USIT Usit-Rings
Tapas de cierre y juntas USIT | End-Caps and Usit-Rings · 11 / 2015
technische teile vertrieb GmbH · Josef-Henle-Str. 9e · D-89257 Illertissen · Tel. +49 (0) 7303 - 92874 - 0 · Fax +49 (0) 7303 - 92874 - 50 · info@ttv-gmbh.de · www.ttv-gmbh.de
Recommended