View
66
Download
0
Category
Preview:
Citation preview
Co
nst
ruct
ion
Det
ails
Back:
1. Attach center back pieces together. 2. Attach binding with 301 lockstitch topstitch about ¼ inch away from edge. Serge the raw edges on the
inside of the garment. 3. Complete center back darks 4. Attach back yoke.
Sleeves:
1. Sew sleeve sides together. 2. Serge raw edges. 3. Attach binding on opening of sleeve. 4. Baste end of sleeve, gather edges to fit the length of the cuff. 5. Sew the outer edges of the cuff, then turn inside out. Attach the cuff to sleeve (tucking in the raw edge. 6. Top stitch cuff 7. Complete 2 buttonholes, Attach buttons.
Front:
1. Complete darts in front side bodice. 2. Attach front side bodices to back bodices (at side and top seams). 3. At top seam, finish raw edges with ssq seam. 4. Attach sleeve into place. 5. Serge raw edges. 6. Attach button side facing piece on so that it is folded in half. On bottom layer, complete all button holes.
(5). 7. Fold left side of the front bodice in 1 inch. Tuck in raw edges and sew over seam. 8. Attach 5 buttons. 9. On the left side of inside of the front bodice, attach style number tab by serging into the edge. 10. Hem using the Efb seam.
Collar:
1. Sew the collar right sides together, leaving open the bottom of the collar. Turn inside out. 2. Do the same for the collar band, but leave the top of the band open. 3. Attach the band and the collar together, tucking in raw edges. 4. Topstitch using the 301 lockstitch, around the whole piece. 5. Attach the collar band to the shirt, while inserting the folded tags; the care tag and the brand label. 6. On the edge of the right side of the collar band, make 2 buttonholes. 7. Attach special buttons on the left side of the edge of the collar band.
Ruffle:
1. Take ruffle piece, and baste down the middle. 2. Pull then ends of the basting, making the ruffle piece into 1.5 feet.
3. Attach the ruffle piece to the top layer of the button side facing piece, sew down the middle of ruffle
attaching it in place.
Construction Details
Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse
Style Ref HMLP1 Sizes xs-xl Collection Number 2
Supplier Vendor Name Tech Pack Sent 10/31/2016
Packing & Labels
Item Code Description Quantity Details
LAB-1 Brand Logo tag 1/GARMENT See tech pack for placement.
LAB-2 Size tag 1/GARMENT See tech pack for placement.
LAB-3 Style Number tag 1/GARMENT See tech pack for placement.
TAG-1 Hang tag w/ garment description 1/GARMENT Pin w/ TAG-2 at sleeve cuff
TAG-2 Hang tag w/ logo 1/GARMENT Pin w/ TAG-1 at sleeve cuff
BG-1 Poly bag 1/GARMENT Vendor determines size
PPR-3 Tissue paper 1/GARMENT Folded w/ garment
Construction Details
Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse
Style Ref HMLP1 Sizes xs-xl Collection Number 2
Supplier Vendor Name Tech Pack Sent 10/31/2016
Pac
kin
g &
Lab
els
LAB-1, LAB-2, LAB-3 attach with ground color thread.
TAG-1, TAG-2 attach with clear plastic tagging fastener (3” long).
Poly bag size determined by garment size (xs,s,m,l,xl). Garment must fit
securely in bag.
Construction Details
Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse
Style Ref HMLP1 Sizes xs-xl Collection Number 2
Supplier Vendor Name Tech Pack Sent 10/31/2016
Swatch Location Fabric Code Type Color Direction
Whole Garment
M4IC2
Woven
Red Wine
Non-directional
Item Type Item Code Location Dimensions Quantity Color Swatch
Button
B77093
Cuffs,
Neckline
1/8”
diameter
6
(2 on
each)
Gunmetal
Button
B76820
Center
front
1/4”
diameter
12
Black
Fab
rics
& T
rim
s
Design
Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse
Style Ref HMLP1 Sizes xs-xl Collection Number 2
Supplier Vendor Name Tech Pack Sent 10/31/2016
Des
ign
Brand Logo tag
Size tag
Fold Brand Logo tag in half along the shorter
edge and sew into neck seam. Fold size tag
along longer edge and sew into neck seam.
Both should be sewn below the collar band.
Fold style # tag in half along longer edge. Sew
into side seam.
Style Number tag
Recommended