View
7
Download
0
Category
Preview:
Citation preview
Tekelec EAGLE® 5
Release 43.0
Feature Notice910-6006-001 Revision E
August 2012
Copyright 2012 Tekelec. All Rights Reserved. Printed in USA.Legal Information can be accessed from the Main Menu of the optical disc or on the
Tekelec Customer Support web site in the Legal Information folder of the Product Support tab.
Table of Contents
EAGLE 5 ISS Release 43.0.......................................................................................6Feature Content.........................................................................................................................63 Links per E5-ATM Card .......................................................................................................8
Feature Control Requirements....................................................................................8Hardware Requirements..............................................................................................8Commands.....................................................................................................................8Limitations...................................................................................................................10
10,000 Routesets ......................................................................................................................10Feature Control Requirements..................................................................................10Hardware Requirements............................................................................................10Commands...................................................................................................................10Limitations...................................................................................................................12
Additional DRA values for INP formatting .......................................................................12Hardware Requirements............................................................................................12Feature Control Requirements .................................................................................12Commands...................................................................................................................12Limitations...................................................................................................................13
Fall-back to GTT after LNP MR Service ..............................................................................13Feature Control Requirements..................................................................................13Hardware Requirements............................................................................................13Commands...................................................................................................................13Limitations...................................................................................................................13
G-Flex MLR Support for Additional OpCodes ..................................................................13Feature Control Requirements..................................................................................14Hardware Requirements............................................................................................14Commands...................................................................................................................14Limitations...................................................................................................................15
Hybrid INP/IDP Relay Service ............................................................................................15Feature Control Requirements..................................................................................16Hardware Requirements............................................................................................16Commands...................................................................................................................16Measurements..............................................................................................................22Limitations...................................................................................................................22
Multiple IDP Relay Instances ...............................................................................................23Feature Control Requirements..................................................................................23Hardware Requirements............................................................................................23Commands...................................................................................................................23
ii910-6006-001 Revision E, August 2012
Measurements..............................................................................................................23Limitations...................................................................................................................23
Point Code and CIC Translation ..........................................................................................24Feature Control Requirements..................................................................................24Hardware Requirements............................................................................................25Commands...................................................................................................................25Measurements..............................................................................................................30Limitations...................................................................................................................30
Pre-LNP Query Service GTT processing ............................................................................30Feature Control Requirements..................................................................................31Hardware Requirements............................................................................................31Commands...................................................................................................................31Limitations...................................................................................................................31
Support CRP check for SRI_SM using TCAP digits ..........................................................31Feature Control Requirements..................................................................................31Hardware Requirements............................................................................................31Commands...................................................................................................................31Limitations...................................................................................................................32
XUDT Conversion Enhancements .......................................................................................32Feature Control Requirements..................................................................................32Hardware Requirements............................................................................................33Commands...................................................................................................................33Measurements..............................................................................................................34Limitations...................................................................................................................34
Other Changes.........................................................................................................................34Change the number of digits in the MAP Routing Info of the returned
SRI_ACK message to 15 ......................................................................................35E5-TDM does not support Hardware Flow Control..............................................35Extended Processing Time Notification...................................................................35PC_TYPE in Daily Maintenance and Hourly Maintenance Per SSP
reports.....................................................................................................................37Support for the BLIXP GPL.......................................................................................38Update to the msucount Command.........................................................................41Update to the netstat Command...............................................................................43Update to rept-imt-lvl2 Command...........................................................................44Update to the rept-stat-imt Command....................................................................46Update to the rept-stat-rtkey Command.................................................................47
Operational Changes..............................................................................................................47UIMs..............................................................................................................................47Hardware Verification Code.....................................................................................49Error Messages............................................................................................................49
iii910-6006-001 Revision E, August 2012
Customer Care Center............................................................................................................54Related Publications...............................................................................................................57Customer Training..................................................................................................................57Locate Product Documentation on the Customer Support Site.......................................57EAGLE 5 ISS Card Overview Table.....................................................................................57Hardware Baseline..................................................................................................................63
Glossary....................................................................................................................69
iv910-6006-001 Revision E, August 2012
List of TablesTable 1: New MAP Operations Supported by the G-Flex MLR Feature ....................................14Table 2: UIM: Hybrid INP/IDPR Relay Service.............................................................................47Table 3: UIM: G-Flex MLR Support for Additional Opcodes.......................................................48Table 4: UIM: Multiple IDPR Instances...........................................................................................48Table 5: UIMs: XUDT Conversion Enhancements.........................................................................48Table 6: UIM: Non-Feature................................................................................................................49Table 7: Hardware Verification Code: 3 ATM Links per E5-ATM Card....................................49Table 8: Error Messages: 3 Links per E5-ATM Card......................................................................49Table 9: Error Message: 10,000 Routesets........................................................................................50Table 10: Error Messages: Fall-back to GTT after LNP MR service.............................................50Table 11: Error Messages: G-Flex MLR Support.............................................................................51Table 12: Error Message: Hybrid INP/IDP Relay Service............................................................51Table 13: Error Message: Multiple IDP Relay Instances................................................................51Table 14: Error Messages: PCT..........................................................................................................52Table 15: Error Message: XUDT UDT Conversion.........................................................................54Table 16: Non Feature-Related Error Messages..............................................................................54Table 17: EAGLE 5 ISS Card Overview Table.................................................................................58Table 18: Hardware Baseline.............................................................................................................63
v910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0
Feature Content
Introduction
Feature notices are distributed to customers with each new release of software.
This Feature Notice includes a brief overview of each feature, lists new hardware required (if any),provides the hardware baseline for this release, and explains how to find the Release Notice and othercustomer documentation on the Customer Support Site.
Revision E contains one update to the material released in Revision D:
The PC_TYPE in Daily Maintenance and Hourly Maintenance Per SSP reports section is added.
New and Enhanced Features
• 3 Links per E5-ATM Card
The E5-ATM card can support up to 3 ATM links.• 10,000 Routesets
Up to 10,000 routesets or destinations can be provisioned on the system. The maximum numberof supported aliases and exception list entries is also increased to 10,000, each.
• Additional DRA values for INP formatting
The INP and AINPQ features are enhanced to support additional DRA values.• Fall-back to GTT after LNP MR Service
Global Title Translation (GTT) can be performed on MSUs that are relayed by certain LNP MRservices.
• G-Flex MLR Support for Additional OpCodes
The G-Flex Map Layer Routing feature is enhanced to support additional MAP Operations.• Hybrid INP/IDP Relay Service
The Prepaid IDP Query Relay feature is enhanced to send CONNECT, CONTINUE, orRELEASECALL responses based on the RTDB lookup results using INP functionality.
In addition, a Service Control Point (SCP) Global Title Address (GTA) can be provisioned basedon a Service Key. This functionality allows Global Title Translation to be used to route an IDP orIDPSMS message to the provisioned SCP GTA.
• Multiple IDP Relay Instances
The Prepaid IDP Query Relay feature is enhanced to support up to 4 IDPRCDPN(X) NPP servicesfor Called Party modifications. Each service can be configured separately to process an incomingIDP message in a different way.
6910-6006-001 Revision E, August 2012
• Point Code and CIC Translation
The system can change the destination point code, originating point code, and circuit identifiercode of an MTP-routed MSU to previously-configured values. This ability allows the system toemulate a point code using other nodes in the network.
• Pre-LNP Query Service GTT processing
GTT can be performed on messages that are destined for certain LNP Query services before themessages are processed by the LNP local subsystem.
• Support CRP check for SRI_SM using TCAP digits
The MSISDN digits in the TCAP layer of SRI_SM messages can be used as the Directory or DialedNumber for MNP Circular Route Prevention processing performed by the MT-Based GSM SMSNP feature.
• XUDT Conversion Enhancements
A new XUDT UDT Conversion feature is introduced to allow XUDT(S) < - > UDT(S) conversionto occur based on the Destination Point Code (DPC).
In addition, the existing ANSI-ITU-China SCCP Conversion feature (now referred to as theANSI/ITU SCCP Conversion feature) can support XUDT(S) conversion for MTP-routed andGT-routed SCCP messages.
Other Changes
• Change the number of digits in the MAP Routing Info of the returned SRI_ACK message to 15
The number of digits in the MAP Routing Info portion of the returned SRI_ACK message can be
configured by the user.• E5-TDM does not support Hardware Flow Control
Documentation for the chg-trm command is updated to note that the E5-TDM card does notsupport hardware flow control on the serial MMI port.
• Extended Processing Time Notification
The rept-stat/rtrv-dstn and rept-stat/rtrv-rte commands are updated to display thewarning "Extended processing time may be required" before more than one destination or routestatus is displayed.
• PC_TYPE in Daily Maintenance and Hourly Maintenance Per SSP reports
The new field PC_TYPE is added to the Daily Maintenance (MTCD) and Hourly Maintenance(MTCH) Per SSP reports for enttype=aiq, atinpq, lnp, np, or vflex.
• Support for the BLIXP GPL
A new BLIXP flash GPL is introduced. This GPL contains a tar image with all of the previouslyindependent flash GPLs required for E5-E1T1, E5-ENET, E5-SM4G, and HC-MIM cards.
• Update to the msucount Command
The msucount command output is updated to provide greater readability.• Update to the netstat Command
The netstat -I command output for non-E5 cards is updated to provide greater readability.• Update to rept-imt-lvl2 Command
7910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
The rept-imt-lvl2 command output is updated to provide greater readability.• Update to the rept-stat-imt Command
The rept-stat-imt command output is updated to display the IMT system alarms.• Update to the rept-stat-rtkey Command
The rept-stat-rtkey command output is updated to provide greater readability.
3 Links per E5-ATM Card
The 3 Links per E5-ATM Card feature allows the E5-ATM card to support a maximum of 3 ATM links.The third link is referred to as link A1 and can be assigned to the third port on an E5-ATM card. TheE5-ATM card must be re-loaded before link A1 can be supported.
The 3 Links per E5-ATM Card feature is a quantity feature with part numbers ranging from 893-0391-01to 893-0391-77. Each quantity FAK supports the feature in the increment of 5 E5-ATM cards.
Feature Control Requirements
• FAK for Part Number in the range 893-0391-01 to 893-0391-77. Each FAK enables the 3 Links perE5-ATM Card feature for an increment of 5 E5-ATM cards.
• Any ATM link provisioned on the system must have a VCI value less than or equal to 16383 beforethe feature can be enabled.
• A temporary FAK cannot be used to enable the feature.• After a feature quantity is enabled, the default status of the feature is ON. A feature cannot be
turned off after being turned on.• After a feature quantity is enabled, a feature with a lower quantity cannot be enabled.
Hardware Requirements
None.
Commands
• enable/rtrv-ctrl-feat—Enhanced to enable and display the status of the 3 Links per E5-ATMCard quantity feature.
rtrv-ctrl-feat
rlghncxa03w 10-11-03 16:40:40 EST EAGLE 43.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- Prepaid SMS Intercept Ph1 893006701 on ---- Intermed GTT Load Sharing 893006901 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800
8910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- SCCP Loop Detection 893016501 off ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- SE-HSL SLK Capacity 893013005 on 32 3 Links per E5-ATM Card 893039101 on 5
;
• ent/rept-stat/rtrv-slk—Enhanced to support the A1 link for an E5-ATM card.
rtrv-slk:loc=1306:link=a1
tekelecstp 10-11-18 12:17:00 EST EAGLE 43.0.0 LP ATM LOC LINK LSN SLC TYPE SET BPS TSEL VCI VPI LL 1306 A1 ls1 1 LIMATM 1 1.544M LINE 5 0 0
• rept-stat-card—Enhanced to support the A1 link for the E5-ATM card.
rept-stat-card:loc=1207:mode=full
eagle1 10-11-18 00:41:18 EST 43.0.0 CARD VERSION TYPE GPL PST SST AST 1207 024-038-000 LIMATM ATMHC IS-NR Active ----- ALARM STATUS = * 0021 Clock A for card failed, Clock B normal IMTPCI GPL version = 133-034-000 BLVXW6 GPL version = 133-033-000 BLDIAG6 GPL version = 133-032-000 BLBEPM GPL version = 128-021-000 BLCPLD GPL version = 133-018-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Fault CLOCK B = Active CLOCK I = Idle HS CLOCK A = Fault HS CLOCK B = Fault HS CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = EPM A DBD STATUS = Valid DBD TYPE = ATM DBD MEMORY SIZE = 512M HW VERIFICATION CODE = ---- CURRENT TEMPERATURE = 48C (119F) PEAK TEMPERATURE: = 49C (121F) [02-01-01 00:34] SIGNALING LINK STATUS SLK PST LS CLLI A OOS-MT ls8 ----------- B OOS-MT ls7 ----------- A1 OOS-MT ls8 ----------- TVG STATUS SNM TVG RESULT = 24 hr: ------, 5 min: ------ SLAN TVG RESULT = 24 hr: ------, 5 min: ------
9910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
SCCP TVG RESULT = 24 hr: ------, 5 min: ------ INM TVG RESULT = 24 hr: ------, 5 min: ------
Command Completed.;
Limitations
No limitations are associated with this feature.
10,000 Routesets
The 10,000 Routesets feature allows up to 10,000 routesets or destinations to be provisioned on theEAGLE 5 ISS. The maximum number of supported aliases and exception list entries are increased to10,000, each. The maximum number of supported normal and exception routes (combined) is increasedto 10,000.
An additional 500 entries continue to be supported for dynamically-created exception list entries.These entries are available only if the Cluster Routing feature is turned on.
Feature Control Requirements
• FAK for Part Number 893-0064-05• The 5000 Routesets feature must be turned on before the 10,000 Routesets feature can be enabled.• The Cluster Routing feature must be turned on before the additional 500 entries that are reserved
for dynamically-created entries are available.• A temporary FAK cannot be used to enable the 10,000 Routesets feature.• The 10,000 Routesets feature cannot be turned off after being turned on.
Hardware Requirements
The 10,000 Routesets feature is supported on all cards except EOAM cards.
Commands
• chg/rtrv-stpopts—Enhanced to support 10,000 destination point codes.• enable/rtrv-ctrl-feat—Enhanced to enable and display the status of the 10,000 Routesets
feature.
rtrv-ctrl-feat
rlghncxa03w 10-03-03 16:40:40 EST EAGLE 43.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000
10910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Large System # Links 893005911 on 2800 Routesets 893006405 on 10000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- Port Chk for MO SMS 893009301 on ---- SCCP Loop Detection 893016501 off ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ----
;
• ent/chg/dlt/rtrv-dstn—Enhanced to support 10,0000 destinations.
Example 1 shows output when the NCR, NRT, CRMD, and 10,000 Routesets features are turnedon.rtrv-dstn
rlghncxa03w 10-08-17 08:29:15 EST EAGLE 43.0.0
DPCA CLLI BEI ELEI ALIASI ALIASN/N24 DMN 003-003-003 ----------- no --- -------------- -------------- SS7 004-004-004 ----------- no --- -------------- -------------- SS7 005-005-005 ----------- no --- -------------- -------------- SS7 008-001-* ----------- no no -------------- -------------- SS7
DESTINATION ENTRIES ALLOCATED: 10000 FULL DPC(s): 9 NETWORK DPC(s): 0 CLUSTER DPC(s): 1 TOTAL DPC(s): 10 CAPACITY (% FULL): 1% ALIASES ALLOCATED: 10000 ALIASES USED: 0 CAPACITY (% FULL): 0% X-LIST ENTRIES ALLOCATED: 500;
Example 2 shows output when the CRMD, NCR, and NRT features are off and the 10,000 Routesetsfeature is turned on.rtrv-dstn
rlghncxa03w 10-08-17 08:29:15 EST EAGLE 43.0.0 Destination table is (10 of 10000) 1% full Alias table is (8 of 10000) 1% full RTRV-DSTN: MASP A – COMPLTD;
• rept-stat-sys—Enhanced to support the 10,000 Routesets feature.• rtrv-tbl-capacity—Enhanced to support the 10,000 Routesets feature.
rtrv-tbl-capacity
rlghncxa03w 10-08-17 08:29:15 EST EAGLE 43.0.0
DSTN table is ( 600 of 10000) 6% full XLIST table is ( 0 of 500) 0% full
11910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
SPC table is ( 0 of 40) 0% full LS table is ( 512 of 1024) 50% full SLK table is ( 1501 of 2800) 54% full IP-LNK table is ( 0 of 512) 0% full IP-HOST table is ( 0 of 2048) 0% full MAP table is ( 1500 of 36000) 5% full MRN table is ( 0 of 3000) 0% full SCCPSRV table is ( 0 of 384) 0% full GTA table is ( 0 of 269999) 0% full GTT-SET table is ( 10 of 2000) 1% full SSNSELID table is ( 0 of 100000) 0% full SCRSET table is ( 25 of 255) 10% full RTEKEY table is ( 0 of 1000) 0% full APPLSOCK table is ( 0 of 4000) 0% full AS table is ( 0 of 250) 0% full VFLXCD table is ( 1 of 4950) 1% full VFLXRN table is ( 1 of 10000) 1% full VFLXVID table is ( 1 of 1000) 1% full NPP-AS table is ( 0 of 1024) 0% full NPP-SRS table is ( 0 of 8192) 0% full GTT-ACT table is ( 0 of 2000) 0% full GTT-ASET table is ( 0 of 20000) 0% full GTMOD table is ( 1 of 100000) 1% full GTT-PATH table is ( 3 of 10000) 1% full
;
Limitations
No limitations are associated with this feature.
Additional DRA values for INP formatting
The existing INP (Part Number 893-0179-01) and AINPQ (Part Number 893-0178-01) features areenhanced to support additional DRA values:
• GRN• GRN+DN• CC+GRN+DN
Hardware Requirements
None.
Feature Control Requirements
There are no feature control requirements identified for this feature.
Commands
• chg/rtrv-ainpopts—Enhanced to provision and display additional DRA values.• chg/rtrv-inpopts—Enhanced to provision and display additional DRA values.
12910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Limitations
No limitations are associated with this feature.
Fall-back to GTT after LNP MR Service
The Fall-back to GTT after LNP MR Service feature allows Global Title Translation (GTT) to beperformed on MSUs after the MSUs are processed by LNP MR services. GTT is used to determine thealternative database node for optimal routing. The LIDB, CLASS, CNAM, ISVM, and WSMSC LNPMR services are supported.
Feature Control Requirements
The EGTT feature must be turned on before the Fall-back to GTT after LNP MR Service functionalitycan be provisioned.
Hardware Requirements
The Fall-back to GTT after LNP MR Service functionality requires an E5-SM4G or higher card.
Commands
The ent/chg/dlt/rtrv-lnp-serv commands are enhanced to provision and display the optionsallowing Fall-back to GTT after LNP MR service.
rtrv-lnp-serv
rlghncxa03w 10-11-11 13:45:15 EST EAGLE 43.0.0 SERV TT TTN DV ALIAS GTTRQD SELID DFLTACT CNAM 1 cnam1 SCCP --- On 10 fallback 8 On 20 discact LIDB 2 lidb1 SCCP --- Off None discact 19 On None falltogtt AIN 3 ain TCAP --- Off None fallback UDF1 22 udf1 TCAP --- --- --- ---
LNP-SERV TABLE IS 2% FULL (6 of 256) ;
Limitations
No limitations are associated with this feature.
G-Flex MLR Support for Additional OpCodes
The existing G-Flex Map Layer Routing (G-Flex MLR) feature (Part Number 893-0217-01) is enhancedto support additional MAP Operations:
13910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Table 1: New MAP Operations Supported by the G-Flex MLR Feature
MAP Operation NameMAP Message DescriptionMAP Opcode
registerSSRegister Supplementary Service10
activateSSActivate Supplementary Service12
deactivateSSDeactivate SupplementaryService
13
interrogateSSInterrogate SupplementaryService
14
authenticationFailureReportAuthentication Failure Report15
restoreDataRestore Data57
processUnstructuredSS-RequestProcess Unstructured SS Request59
readyForSMReady for Short Message66
purgeMSPurge Mobile Subscriber67
sendRoutingInfoFor LCSSend Routing Information forLoCation Service
85
This enhancement also allows the G-Flex MLR feature to use the MSISDN from the MAP layer if theIMSI is not available for routing Process Unstructured SS Request and sendRoutingInfoForLCSmessages.
Feature Control Requirements
No additional feature control requirements are required for this enhancement.
Hardware Requirements
No additional hardware is required for this enhancement.
Commands
The chg/rtrv-gsmopts commands are updated to provision and display the additional MAPoperations that can be supported by the G-Flex MLR feature.
rtrv-gsmopts
tekelecstp 11-01-11 16:12:11 EST EAGLE 43.0.0 GSM OPTIONS ---------------------------- MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE DEFMAPVR = 1
DEFMCC = NONE DEFMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE
14910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE
SRIDN = TCAP SRIDNNOTFOUND = GTT CRPTT = NONE SRISMGTTRTG = OFF MSRNDIG = RN MSRNNAI = 0 MSRNNP = 0 MSISDNTRUNC = 0 SRFADDR = NONE SRFNAI = 0 SRFNP = 0 MSRNLEN = 30
SERVERPFX = NONE GSM2IS41 = NONE MIGRPFX = SINGLE IS412GSM = NONE
SPORTTYPE = NONE DFLTRN = NONE
EIRGRSP = OFF EIRRSPTYPE = TYPE1 EIRIMSICHK = OFF
ENCODECUG = OFF ENCODENPS = ON ENCDNPSPTNONE = OFF ENCDNPSDNNOTFOUND= OFF
G-Flex MLR OPTIONS : GFLEXMAPLAYERRTG = NONE
REGSS = OFF ACTSS = OFF DACTSS = OFF INTSS = OFF AUTHFAILRPT = OFF RSTDATA = OFF PROCUNSTRQT = OFF RDYFORSM = OFF PURGMOBSS = OFF SRILOC = OFF
;
Limitations
No limitations are associated with this feature.
Hybrid INP/IDP Relay Service
The Hybrid INP/IDP Relay Service feature allows the existing Prepaid IDP Query Relay feature (PartNumber 893-0160-01) to send CONNECT, CONTINUE, or RELEASECALL responses based on theRTDB lookup results. This functionality includes the ability to configure whether the CutAndPasteparameter is included in the CONNECT message when the message is sent from the Prepaid IDPQuery Relay feature.
The functionality is configured for the Prepaid IDP Query Relay feature using a new INPRTG ServiceAction, which is applicable to the IDPRCDPN(X) and IDPRCGPN NPP services. Refer to the NumberingPlan Processor (NPP) Overview for more information.
The Hybrid INP/IDP Relay Service feature also allows a Service Control Point (SCP) Global TitleAddress (GTA) to be provisioned based on a Service Key. This functionality is configured using a newSKGTARTG Service Action which is applicable to IDPRCDPN(x) services. This Service Action allows
15910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
the IDP message to be routed to the provisioned SCP GTA. If the functionality is not configured, thenthe message is routed to the incoming SCCP Called Party Address (CdPA) GTA.
Note: If both A-Party Routing and Service Key based GTA routing are configured, then the ServiceKey based GTA routing takes precedence.
Feature Control Requirements
The Prepaid IDP Query Relay feature must be enabled before the Service Key based GTA routingfunctionality can be provisioned.
Hardware Requirements
None.
Commands
• chg/rtrv-measopts—Enhanced to support the SYSTOT-IDPR report.
Note: The SYSTOT-IDPR report is supported by provisioning a systotidpr option in thechg-measopts command. This option can be turned on or off as a member of a comma-separatedmnemonic list (chg-measopts:on=systotidpr, chg-measopts:off=systotidpr). As ofRelease 43.0, the systotidpr option is the only option that can be configured as part of thecomma-separated list.
rtrv-measopts
tekelecstp 10-12-06 15:03:36 EST EAGLE 43.0.0
PLATFORMENABLE = off COLLECT15MIN = off CLLIBASEDNAME = off OAMHCMEAS = off ---------------------- SYSTOTSTP = off SYSTOTTT = off SYSTOTSTPLAN = off SYSTOTIDPR = off COMPLINK = off COMPLNKSET = off COMPSCTPASOC = off COMPSCTPCARD = off COMPUA = off GTWYSTP = off GTWYLNKSET = off GTWYORIGNI = off GTWYORIGNINC = off GTWYLSORIGNI = off GTWYLSDESTNI = off GTWYLSONISMT = off NMSTP = off NMLINK = off NMLNKSET = off AVLLINK = off AVLSTPLAN = off AVLDLINK = off ;
• chg/rtrv-npp-serv—Enhanced to support the SKGTARTG and INPRTG Service Actions.
16910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
rtrv-npp-serv
tekelecstp 10-11-19 18:45:23 EST EAGLE 43.0.0
SERVICE STATUS SA PRECEDENCE ------------------------------------------ nppt off rtdbtrnsp 100 rtdbtrn 50 rtdbtsp 50 cdial 10
SERVICE STATUS SA PRECEDENCE ------------------------------------------ tif off cdial 10 fwdscs 5 crp 92 npnrls 91 nprelay 80 nprls 80 snscgpn 75 cgpnsvcrqd 80 asdlkup 90 grnlkup 90 cgpnasdrqd 90 cgpngrnrqd 90 nscdpn 80 nscgpn 75
SERVICE STATUS SA PRECEDENCE ------------------------------------------ tif2 off cdial 10 fwdscs 5 crp 92 npnrls 91 nprelay 80 nprls 80 snscgpn 75 cgpnsvcrqd 80 asdlkup 90 grnlkup 90 cgpnasdrqd 90 cgpngrnrqd 90 nscdpn 80 nscgpn 75
SERVICE STATUS SA PRECEDENCE ------------------------------------------ tif3 off cdial 10 fwdscs 5 crp 92 npnrls 91 nprelay 80 nprls 80 snscgpn 75 cgpnsvcrqd 80 asdlkup 90 grnlkup 90 cgpnasdrqd 90 cgpngrnrqd 90 nscdpn 80 nscgpn 75
SERVICE STATUS SA PRECEDENCE ------------------------------------------ idprcdpn off cdial 10
17910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
ccncchk 100 cdpnnp 80 lacck 60 cgpnsvcrqd 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50 cgpngrnrqd 50 inprtg 95 skgtartg 50
SERVICE STATUS SA PRECEDENCE ------------------------------------------ idprcgpn off cdial 10 cgpnnp 80 asdlkup 50 grnlkup 50 blklstqry 90 blklstrly 90 cgpnrtg 70 inprtg 95
SERVICE STATUS SA PRECEDENCE ------------------------------------------ mosmsicdpn off cdial 10 cdpnnp 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50 cgpngrnrqd 50 migrate 70
SERVICE STATUS SA PRECEDENCE ------------------------------------------ mosmsicgpn off cdial 10 asdlkup 50 grnlkup 50
SERVICE STATUS SA PRECEDENCE ------------------------------------------ mosmsgcdpn off cdial 10 cdpnnp 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50 cgpngrnrqd 50 pprelay 80
SERVICE STATUS SA PRECEDENCE ------------------------------------------ mosmsgcgpn off cdial 10 asdlkup 50 grnlkup 50 pprelay 80 fraudchk 90
SERVICE STATUS SA PRECEDENCE ------------------------------------------ iarcdpn off cdial 10 ccncchk 100 cdpnnp 80 cgpnsvcrqd 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50
18910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
cgpngrnrqd 50
SERVICE STATUS SA PRECEDENCE ------------------------------------------ iarcgpn off cdial 10 cgpnnp 80 asdlkup 50 grnlkup 50
SERVICE STATUS SA PRECEDENCE ------------------------------------------ idprcdpn2 off cdial 10 ccncchk 100 cdpnnp 80 lacck 60 cgpnsvcrqd 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50 cgpngrnrqd 50 inprtg 95 skgtartg 50
SERVICE STATUS SA PRECEDENCE ------------------------------------------ idprcdpn3 off cdial 10 ccncchk 100 cdpnnp 80 lacck 60 cgpnsvcrqd 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50 cgpngrnrqd 50 inprtg 95 skgtartg 50
SERVICE STATUS SA PRECEDENCE ------------------------------------------ idprcdpn4 off cdial 10 ccncchk 100 cdpnnp 80 lacck 60 cgpnsvcrqd 60 asdlkup 50 grnlkup 50 cgpnasdrqd 50 cgpngrnrqd 50 inprtg 95 skgtartg 50
;
• chg/rtrv-ttropts—Enhanced to provision options for the CONNECT, CONTINUE, andRELEASECALL messages that can be sent by the Prepaid IDP Query Relay feature.
rtrv-ttropts
tekelecstp 10-10-28 14:53:28 EST EAGLE 43.0.0
TTR OPTIONS ----------------------------------------------------- CDPN DETAILS CGPN DETAILS NPTYPE rnsp CGNPTYPE rnsp SNAI incoming CGSNAI incoming
19910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
CGPACCCK nonintl DLMA NONE DLMB NONE DLMC NONE DFLTRN NONE SPORTTYPE none SPFILL off RNSPFILL off CGPNSKRTG no DRAFRMT grn DRANAI 3 CDRNRSP connect CDSPRSP relay CDNOENTITYRSP continue CDDNNOTFNDRSP release CDDRA rndn CDDRANAI NATL CDDRANP E164 CDRELCAUSE 31 CDCNP OFF CGRNRSP connect CGSPRSP relay CGNOENTITYRSP continue CGDNNOTFNDRSP release CGDRA rndn CGDRANAI NATL CGDRANP E164 CGRELCAUSE 31 CGCNP OFF
;
• ent/chg/dlt/rtrv-csl—Enhanced to provision the SCP GTA.
Example 1 displays the output when all CSLs are requested:rtrv-csl
tekelecstp 10-10-29 12:55:34 EST EAGLE 43.0.0
Prepaid IDP Query Relay CC+NC List DS
--------------- 000015 000025
CC+NC List ( 2 of 20) 10%
Prepaid IDP Query Relay GT List DS CDPN BCD
--------------- ---------- 1234567815 0
GT List ( 1 of 500) 1%
Prepaid IDP Query Relay SK+BCSM List DS PT IDPRCDPN SCPGTA
--------------- ---------- ---------- --------------------- 0000000123 prepaidno idprcdpn 0000000014
20910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
0000000143 prepaidno idprcdpn 0000000014 1234567815 prepaidno idprcdpn3 1234 123456782e prepaidno idprcdpn NONE 1234567890 prepaidno idprcdpn NONE
SK+BCSM List ( 5 of 150) 3%
IDP Screening for Prepaid SK+TS List DS
--------------- 0025 0569 1529
SK+TS List ( 3 of 25) 12%
IDP Screening for Prepaid INSL List DS
--------------- 0029 0048 0148
INSL List ( 3 of 50) 6%
;
Example 2 displays the output when CSL information for the Prepaid IDP Query Relay feature isrequested.rtrv-csl:feature=”Prepaid IDP Query Relay”
tekelecstp 10-10-29 12:49:31 EST EAGLE 43.0.0
Prepaid IDP Query Relay CC+NC List DS
--------------- 000015 000025
CC+NC List ( 2 of 20) 10%
Prepaid IDP Query Relay GT List DS CDPN BCD
--------------- ---------- 1234567815 0
GT List ( 1 of 500) 1%
Prepaid IDP Query Relay SK+BCSM List DS PT IDPRCDPN SCPGTA
--------------- ---------- ---------- --------------------- 0000000123 prepaidno idprcdpn 0000000014 0000000143 prepaidno idprcdpn 0000000014 1234567815 prepaidno idprcdpn3 1234 123456782e prepaidno idprcdpn NONE
21910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
1234567890 prepaidno idprcdpn NONE
SK+BCSM List ( 5 of 150) 3%
;
Example 3 displays the output when Service Control Point information is requested.rtrv-csl:scpgta=0000000014
tekelecstp 10-10-29 12:57:35 EST EAGLE 43.0.0
Prepaid IDP Query Relay SK+BCSM List DS PT IDPRCDPN SCPGTA
--------------- ---------- ---------- --------------------- 0000000123 prepaidno idprcdpn 0000000014 0000000143 prepaidno idprcdpn 0000000014
SK+BCSM List ( 2 of 150) 1%
;
• ent/chg/dlt/rtrv-npp-as—Enhanced to provision INP functionality for the Prepaid IDPQuery Relay feature using the new SKGTARTG and INPRTG Service Actions.
• rept-ftp-meas—Enhanced to support measurements for IDPR.• rept-meas—Enhanced to support measurements for IDPR.
Measurements
A new SYSTOT-IDPR report is added for the registers associated with the Hybrid INP/IDP RelayService feature and the Multiple IDP Relay Instances feature. This report can be generated using theMeasurements Control Platform, OAM-based, or E5-OAM Integrated Measurements collection method.
The SYSTOT-IDPR report contains the following new registers for the Hybrid INP/IDP Relay Servicefeature:
• IDPINPRTG(X)—number of IDP MSUs processed by the INPRTG Service Action from thecorresponding IDPRCDPN(X) services
• IDPINPCONN(X)—number of IDP MSUs for which the INPRTG Service Action sent a CONNECTmessage from the corresponding IDPRCDPN(X) services
• IDPINPCONT(X)—number of IDP MSUs for which the INPRTG Service Action sent a CONTINUEmessage from the corresponding IDPRCDPN(X) services
• IDPINPRLC(X)—number of IDP MSUs for which the INPRTG Service Action sent a RELEASECALLmessage from the corresponding IDPRCDPN(X) services
• IDPSKGTART(X)—number of IDP/IDPSMS MSUs for which the SKGTA Service Action is invokedfor IDPRCDPN(X) services
Limitations
No limitations are associated with this feature.
22910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Multiple IDP Relay Instances
The Multiple IDP Relay Instances feature allows the existing Prepaid IDP Query Relay feature (PartNumber 893-0160-01) to support up to 4 IDPRCDPN NPP services (IDPRCDPN, IDPRCDPN2,IDPRCDPN3, and IDPRCDPN4) for Called Party modifications. Each service can be configuredseparately to process an incoming IDP message in a different way. Refer to the Numbering Plan Processor(NPP) Overview for more information.
Note: The combined services are referred as IDPRCDPN(X) unless a specific service must be specified.
Feature Control Requirements
At least one of the IDPRCDPN(X) services must be configured before the Prepaid IDP Query Relayfeature can be turned on.
Hardware Requirements
None.
Commands
• chg/rtrv-measopts—Enhanced to support the SYSTOT-IDPR report. See the Commands sectionfor the Hybrid INP/IDP Relay Service feature for an example of the rtrv-measopts output.
• ent/chg/dlt/rtrv-npp-as—Enhanced to support the SKGRTG and INPRTG Service Actionsfor the IDPRCDPN(X) services.
• chg/rtrv-npp-serv—Enhanced to support the IDPRCDPN(X) NPP services. See the Commandssection for the Hybrid INP/IDP Relay Service feature for an example of rtrv-npp-serv output.
• chg/rtrv-ttropts—Enhanced to support the IDPRCDPN(X) NPP services. See the Commandssection for the Hybrid INP/IDP Relay Service feature for an example of rtrv-ttropts output.
• enable/chg-ctrl-feat—Enhanced to require one of the IDPRCDPN(X) NPP services to beprovisioned before the Prepaid IDP Query Relay feature can be turned on.
• ent/chg/dlt-npp-srs—Enhanced to support the IDPRCDPN(X) NPP services.• ent/chg/dlt/rtrv-csl—Enhanced to support the IDPRCDPN(X) services. See the Commands
section for the Hybrid INP/IDP Relay feature for examples of rtrv-csl output.• rept-ftp-meas—Enhanced to support measurements for IDPR.• rept-meas—Enhanced to support measurements for IDPR.
Measurements
The IDPRCDPN(X) register is reported in the SYSTOT-IDPR report. This register tracks the numberof IDP/IDPSMS MSUs processed per IDPRCDPN(X) NPP service.
See the Measurements section for the Hybrid INP/IDPR Relay feature for a description of theSYSTOT-IDPR report.
Limitations
No limitations are associated with this feature.
23910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Point Code and CIC Translation
The Point Code and CIC Translation (PCT) feature allows the EAGLE 5 ISS to change the destinationpoint code (DPC) or originating point code (OPC) of an MTP-routed MSU to previously configuredvalues. This functionality allows external networks to continue using the old point codes by emulatingand mapping them to the new real point codes within the networks. The feature can also be used tochange the circuit identifier code (CIC) of the MSU.
Note: ITUN24 point codes, spare point codes, and private point codes are not supported by PCTtranslations.
A new PCT table is used to define translations between real and emulated point codes.
Network nodes can send and receive traffic to and from the emulated point code (EPC) without'knowing' the real point code (Real PC) that is being emulated by the EPC. This ability allows the RealPC to be changed transparently from the rest of the network, which can continue using the EPC toroute traffic.
If PCT is configured, either system wide or for the incoming linkset, then a DPC lookup is performedon the incoming MSU. If a translation is found during the DPC lookup, then the DPC of the MSU isreplaced by the Real PC as the MSU is received by the EAGLE 5 ISS. If a Real CIC was provisioned inthe translation, then the CIC of the MSU is changed to the value from the Real CIC range.
If the MSU was not modified by the DPC lookup, then an OPC lookup is performed on the outgoingMSU. If a translation is found during the OPC lookup, then the OPC of the MSU is replaced by theEPC of the matching translation as the MSU leaves the EAGLE 5 ISS. If an Emulated CIC wasprovisioned in the translation, then the CIC of the MSU is changed to the value from the EmulatedCIC range.
Features and functionalities in the EAGLE 5 ISS use the real point code in provisioning.
The PCT feature is a quantity feature. The quantity is used to define the maximum number of allowedtranslations.
Feature Control Requirements
• FAK for the Part Number of the desired quantity feature:
• 893-0372-01—25 translations• 893-0372-02—50 translations• 893-0372-03—75 translations• 893-0372-04—100 translations• 893-0372-05—150 translations• 893-0372-06—200 translations• 893-0372-07—250 translations• 893-0372-08—1000 translations
• After a PCT feature has been enabled, a PCT feature with a lower quantity cannot be enabled.• A temporary FAK cannot be used to enable the feature.
24910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Hardware Requirements
The pct pass command is not supported on E1/T1 MIM, E1-ATM, LIM-ATM, and MPL cards.
Commands
• chg-lsopts—Enhanced to allow point code translation to be applied to MSUs on links of aspecified linkset. The status of this functionality is displayed in the rtrv-ls command.
• chg/rtrv-stpopts—Enhanced to apply point code translation to all or selected MSUs.
rtrv-stpopts
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0 STP OPTIONS --------------------------- MTPT31CTL 1 MTPLTI yes MTPLTCTDPCQ 3 MTPLTST 10000 MTPXLQ 500 MTPXLET 0100 MTPXLOT 90% MTPDPCQ 8000 TFATFRPR 1000 MTPRSI yes MTPRSIT 5000 MTPLPRST yes MTPT10ALT 30000 UIMRD yes SLSCNV perls CRITALMINH yes DISPACTALMS no NPCFMTI 14-0-0-0 GSMDFLT PASS GSMDECERR PASS DEFCC 49 DEFNDC 177 DSMAUD no RPTLNPMRSS yes RANDSLS all RSTRDEV on SECMTPMATE off SECMTPSID off SECMTPSNM notify SECSCCPSCMG notify CNVCGDA yes CNVCGDI yes CNVCGDN yes CNVCGDN24 yes GTCNVDFLT yes ANSIGFLEX yes HSCLKSRC RS422 HSCLKLL LONGHAUL ARCHBLDID off PCT on;
• dlt-rte—Enhanced to prevent the last route to a destination point code that exists in the PCTtable from being deleted until the Filter Point Code or the Real Point Code is deleted from the table.
• enable/rtrv-ctrl-feat—Enhanced to support the PCT feature.
25910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
rtrv-ctrl-feat
rlghncxa03w 10-08-03 16:40:40 EST EAGLE 43.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- Spare Point Code Support 893013601 on ---- PC & CIC Translation 893037201 on 1000
;
• ent/dlt/rtrv-pct—Added to provision and display point code and CIC translation data.
rtrv-pct
tekelecstp 10-08-26 11:31:14 EST EAGLE 43.0.0
EPCA FILTPCA REALPCA SI SSN RELCAUSE 001-001-001 * 002-002-002 4 --- 10
ECICS = 10 ECICE = 20 RCICS = 30 RCICE = 40
EPCI FILTPCI REALPCI SI SSN RELCAUSE 1-001-2 2-002-2 2-002-2 3 10 ---
ECICS = ---------- ECICE = ---------- RCICS = ---------- RCICE = ----------
EPCN FILTPCN REALPCN SI SSN RELCAUSE 00300 * 00200 * --- ---
ECICS = ---------- ECICE = ---------- RCICS = ---------- RCICE = ----------
PCT table is (3 of 1000) 1% full.
;
• pct—Added to maintain per-translation statistics and to test PCT functionality. The pct commandcan be operated in Stats or Test mode. In Stats mode, the command is used to reset or displayper-translation statistics. In Test mode, the command is used to test PCT behavior for a messagewith the specified field values.
Example 1 shows output for the PCT help command.
26910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
pass:loc=1201:cmd="pct -h"
Command Accepted – Processing
Usage: pct -m stats [-l | -r] [-p pctype] [-e epc] [-f fpc] [-a realpc] [-s si] [-u ssn] [-c cicr] pct -m test [-p pctype] -d dpc -o opc -s si [-c cic] [-u ssn] pct -h Modes: stats - reset or display per-rule stats test - test PCT behavior for a message with the specified field values Common Options: -p pctype is ANSI, ITUI, or ITUN stats Mode Options: -r reset the stats for selected rules with no other options, resets stats on all rules if other options present, -e or -a must be supplied -l list the stats for selected rules (default) the -e or -a option must be supplied both -e and -a may be supplied -e emulated point code -a real point code -c cicr is in these forms: * (see Note 1) ecics-ecice:rcics-rcice, e.g., 5-10:15-20 ecics:rcics, e.g., 5:6 which is equiv to 5-5:6-6 allowed only if SI is 4, 5, or 13 -f filter pc; may be * (see Note 1) -s si; can be 0, 3, 4, 5, 13, or * (see Note 1) -u ssn; may be * (see Note 1) allowed only if SI is 3 test Mode Options: -d DPC in simulated MSU -o OPC in simulated MSU -s SI in simulated MSU -u SSN in CgPA and CdPA in simulated MSU; if absent and si is 3, indicates that route on SSN is off; allowed only if SI is 3 -c CIC in simulated MSU; required if SI is 4, 5, or 13 Notes: 1. an explicit * will match only with rule containing a wildcard; to match
on wildcard or a specific value, do not specify the associated option
Example 2 shows output for Stats mode.pass:loc=1201:cmd=”pct –m stats –l –e 4-3-1”
Command Accepted – Processing
idx epc rpc fpc si ssn 6 004-003-001 007-003-001 007-002-030 3 24 dpclkp: 0 opclkp: 0 msudisc: 0 7 004-003-001 007-003-002 007-002-030 3 26 dpclkp: 0 opclkp: 0 msudisc: 0 8 004-003-001 007-003-006 007-002-030 5 --- ecic: 100-105 rcic: 200-205 dpclkp: 0 opclkp: 0 msudisc: 0 9 004-003-001 007-003-011 007-002-* 3 24 dpclkp: 0 opclkp: 0 msudisc: 0 10 004-003-001 007-003-016 007-*-* 3 24 dpclkp: 0 opclkp: 0 msudisc: 0 11 004-003-001 007-003-021 007-002-030 3 *
27910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
dpclkp: 0 opclkp: 0 msudisc: 0 12 004-003-001 007-003-026 007-002-030 5 --- dpclkp: 0 opclkp: 0 msudisc: 0 13 004-003-001 007-003-031 007-002-* 3 * dpclkp: 0 opclkp: 0 msudisc: 0 14 004-003-001 007-003-036 007-003-* 3 * dpclkp: 0 opclkp: 0 msudisc: 0 15 004-003-001 007-003-041 007-*-* 3 * dpclkp: 0 opclkp: 0 msudisc: 0 16 004-003-001 007-003-046 008-*-* 3 * dpclkp: 0 opclkp: 0 msudisc: 0 17 004-003-001 007-003-051 007-002-029 * --- dpclkp: 0 opclkp: 0 msudisc: 0 18 004-003-001 007-003-056 007-002-030 * --- dpclkp: 0 opclkp: 0 msudisc: 0 19 004-003-001 007-003-061 007-002-* * --- dpclkp: 0 opclkp: 0 msudisc: 0 20 004-003-001 007-003-066 007-*-* * --- dpclkp: 0 opclkp: 0 msudisc: 0 21 004-003-001 007-003-071 -------------- 3 24 dpclkp: 0 opclkp: 0 msudisc: 0 22 004-003-001 007-003-076 -------------- 5 --- ecic: 100-105 rcic: 200-205 dpclkp: 0 opclkp: 0 msudisc: 0 23 004-003-001 007-003-081 -------------- 3 * dpclkp: 0 opclkp: 0 msudisc: 0 24 004-003-001 007-003-086 -------------- 5 --- dpclkp: 0 opclkp: 0 msudisc: 0 25 004-003-001 007-003-091 -------------- * --- dpclkp: 0 opclkp: 0 msudisc: 0
Example 3 resets counters for all translations with the specified ANSI emulated point code.pass:loc=1201:cmd=”pct –m stats –l –r –e 4-3-1”
Command Accepted – Processing
Stats reset on 20 rules
Example 4 shows a match on DPC lookup in Test mode.pass:loc=1201:cmd="pct -m test -d 4-3-1 -o 7-2-30 -s 3 -u 26"
Command Accepted – Processing
Point Code and CIC Translation Lookup Test MSU content: OPC: 007-002-030 DPC: 004-003-001 SI: 3 SSN: 26 Lookup result: Match on DPC was found Matching entry: idx epc rpc fpc si ssn 7 004-003-001 007-003-002 007-002-030 3 26
Example 5 shows a match on OPC lookup in Test mode.pass:loc=1201:cmd="pct -m test -d 7-2-30 -o 7-3-2 -s 3 -u 26"
Command Accepted – Processing
Point Code and CIC Translation Lookup Test MSU content: OPC: 007-003-002 DPC: 007-002-030 SI: 3
28910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
SSN: 26 Lookup result: Match on OPC was found Matching entry: idx epc rpc fpc si ssn 7 004-003-001 007-003-002 007-002-030 3 26
Example 6 shows a match on DPC lookup where the matching translation has a wildcard Filter PCand a wildcard SI in Test mode.pass:loc=1201:cmd="pct -m test -d 4-3-1 -o 9-9-9 -s 4 –c 106"
Command Accepted – Processing
Point Code and CIC Translation Lookup Test MSU content: OPC: 009-009-009 DPC: 004-003-001 SI: 4 CIC: 106 Lookup result: Match on DPC was found Matching entry: idx epc rpc fpc si ssn 25 004-003-001 007-003-091 -------------- * ---
• rtrv-ls—Enhanced to display the status of PCT on a linkset.
Example 1 displays the output when the PCT feature is turned on.rtrv-ls:lsn=ls1
tekelecstp 10-08-17 01:25:45 EST EAGLE 43.0.0
L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS ls1 003-003-003 gws1 1 1 no A 15 on on on yes off
SPCA CLLI TFATCABMLQ MTPRSE ASL8 ---------------- ----------- 1 no no
RANDSLS off
IPSG IPGWAPC GTTMODE CGGTMOD PCT no no CdPA no off
L2T PCR PCR LOC PORT SLC TYPE SET BPS ECM N1 N2 1101 A 0 LIMDS0 1 56000 BASIC --- -----
LP ATM LOC PORT SLC TYPE SET BPS TSEL VCI VPI LL 1102 A 2 LIMATM 1 1.544M LINE 5 0 0
LOC PORT SLC TYPE IPLIML2 1201 A 5 IPLIM M2PA
L2T PCR PCR E1 E1 LOC PORT SLC TYPE SET BPS ECM N1 N2 LOC PORT TS 1205 A 6 LIME1 1 56000 BASIC --- ----- 1205 1 1
L2T PCR PCR T1 T1 LOC PORT SLC TYPE SET BPS ECM N1 N2 LOC PORT TS 1206 A 10 LIMT1 1 56000 BASIC --- ----- 1206 1 1
29910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Link set table is (7 of 1024) 1% full.
;
Example 2 displays output when the FLOBR and PCT features are turned on.rtrv-ls:lsn=ls8
tekelecstp 10-08-17 12:29:09 EST EAGLE 43.0.0
L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS ls8 001-001-001 none 1 1 no A 0 off off off no off
SPCA CLLI TFATCABMLQ MTPRSE ASL8 ---------------- ----------- 1 --- no
RANDSLS off
IPSG IPGWAPC GTTMODE CGGTMOD PCT no no FLCdPA,FLCgPA no off
Link set table is (2 of 1024) 1% full.
;
Measurements
New registers are added to the SYSTOT reports for the PCT feature:
• PCTDPCLKP—number of MSUs where PCT DPC Lookup was done successfully (the MSU’s DPCand/or CIC was modified when the PCT DPC Lookup was performed)
• PCTOPCLKP—number of MSUs where the PCT OPC Lookup was done successfully (the MSU’sOPC and/or CIC was modified when the PCT OPC Lookup was performed)
These measurements can be obtained using the Measurements Control Platform, OAM-based, orE5-OAM Integrated Measurements collection method.
Limitations
All Network Management may not work fully due to the overlap of CIC across multiple point codes.
Pre-LNP Query Service GTT processing
The Pre-LNP Query Service GTT processing feature allows Global Title Translation (GTT) to beperformed on messages before the messages are processed by the LNP local subsystem.
GTT is used to determine whether the originator of the query has an agreement with the LNP serviceprovider to perform LNP database lookup. If an agreement exists, then LNP service processing isperformed and an appropriate response is sent to the originator. If an agreement does not exist, thenthe query is routed as per the GTT result.
This functionality is available for LNP Query Services (AIN, IN, LRNQT, LNPQS, PCS, and WNP).
30910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Feature Control Requirements
The EGTT feature must be turned on before the Pre-LNP Query Service GTT processing functionalitycan be provisioned.
Hardware Requirements
The Pre-LNP Query Service GTT processing functionality requires an E5-SM4G or higher card.
Commands
The ent/chg/dlt/rtrv-lnp-serv commands are enhanced to provision and display the optionsallowing Pre-LNP Query Service GTT Processing.
An example of output for the rtrv-lnp-serv command is shown in the Commands section for theFall-back to GTT after LNP MR Service feature.
Limitations
No limitations are associated with this feature.
Support CRP check for SRI_SM using TCAP digits
The Support CRP check for SRI_SM using TCAP digits feature allows SCCP or TCAP MSISDN digitsof SRI_SM messages to be used as the Directory or Dialed Number (DN) for MNP Circular RoutePrevention (MNPCRP) processing performed by the MT-Based GSM SMS NP feature.
If the TCAP MSISDN is used as the DN, a Home Routing Number (RN) match is found in the incomingTCAP MSISDN digits, and the SRI_SM message is to be relayed, then the RN digits from the TCAPMSISDN are stripped before relaying the message to the Home Location Register (HLR).
Feature Control Requirements
The MT-Based GSM SMS NP feature (Part Number 893-0200-01) must be enabled before the SupportCRP check for SRI_SM using TCAP digits functionality can be provisioned.
Hardware Requirements
None.
Commands
The chg/rtrv-gsmsmsopts commands are enhanced to provision and display the Support CRPcheck for SRI_SM using TCAP digits functionality.
rtrv-gsmsmsopts
tekelecstp 10-09-23 11:27:38 EST EAGLE5 43.0.0 GSM SMS OPTIONS --------------------------------------
31910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
BPARTYGTTSN = NONE MOSMSGTTDIG = SCCPCDPA MOSMSTYPE = SPRN MOSMSNAI = INTL MOSMSSA = NO MOSMSFWD = NO MOSMSACLEN = 0 MOSMSGTA = NONE MOSMSTCAPSEG = OFF MOSMSDIGMAT = EXACT SPORTTYPE = NONE SPFILL = OFF DEFRN = NONE
MTSMSIMSI = MCCRNDN MTSMSNNI = RN MTSMSTYPE = RN MTSMSACKN = ACK MTSMSDLTR = NO MTSMSDLTRV = NONE MTSMSNAKERR = 1 MTSMSCHKSRC = NO MTMMSTYPE = RN SRISMDN = SCCP
MTMMSGTA = NONE MTMMSACKN = ACK MTMMSENTYLEN = NONE MTMMSLEN = NONE
IGMSMSRELAY = NO DEFIS41SMSC = NONE IS41SMSCGTTSN= NONE
Limitations
No limitations are associated with this feature.
XUDT Conversion Enhancements
The XUDT Conversion Enhancements consists of two parts:
• A new XUDT UDT Conversion feature allows XUDT(S) < - > UDT(S) conversion to occur basedon the Destination Point Code (DPC) for MTP-routed and EAGLE-generated SCCP messages.Format conversions for both segmented and non-segmented messages are supported: however,the system does not perform segmentation or reassembly.
• The existing ANSI-ITU-China SCCP Conversion feature is enhanced to support XUDT(S) conversionfor MTP-routed and GT-routed SCCP messages. As part of this enhancement, the ANSI-ITU-ChinaSCCP Conversion feature is now referred to as the ANSI/ITU SCCP Conversion feature.
For GT-routed messages and MTP-Routed SCCP messages that are processed on Service Modulecards, XUDT UDT conversion is applied after the ANSI/ITU SCCP Conversion feature processes themessages.
The ANSI/ITU SCCP Conversion feature and the XUDT UDT Conversion feature can operateindependently of each other.
Feature Control Requirements
• The XUDT UDT Conversion feature requires a FAK for Part Number 893-0353-01.• The XUDT UDT Conversion feature cannot be turned off after it has been turned on.• A temporary FAK cannot be used to enable the XUDT UDT Conversion feature.• The ANSI/ITU SCCP Conversion feature requires a FAK for the existing Part Number 893-0120-01.
32910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Hardware Requirements
None.
Commands
• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of theXUDT UDT Conversion feature.
rtrv-ctrl-feat
rlghncxa03w 10-08-12 16:40:40 EST EAGLE 43.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- Prepaid SMS Intercept Ph1 893006701 on ---- Intermed GTT Load Sharing 893006901 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- SE-HSL SLK Capacity 893013005 on 32 GPORT 893017201 on ---- APORT 893016601 on ---- IS41 GSM Migration 893017301 off ---- INP 893017901 on ---- G-Flex 893021901 on ---- XUDT UDT Conversion 893035301 on ----
;
• ent/chg/dlt/rtrv-dstn—Enhanced to provision the type of conversion performed on MSUsthat are associated with a specified destination.
Example 1 displays the output for a destination point code.rtrv-dstn:dpc=200-200-*
eagle10115 10-058-12 10:00:37 EST EAGLE 43.0.0
DPCA CLLI BEI ELEI ALIASI ALIASN/N24 DMN 200-200-* cluster2 yes no -------------- -------------- SS7
SPCA NCAI RCAUSE NPRST SPLITIAM HMSMSC HMSCP SCCPMSGCNV ----------- yes none off none no no none
Destination table is (197 of 2000) 10% full Alias table is (206 of 12000) 2% full;
33910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Example 2 displays the output when a proxy point code is referenced.rtrv-dstn:dpc=1-1-1
eagle10115 10-05-12 10:00:37 EST EAGLE 43.0.0
DPCA CLLI BEI ELEI ALIASI ALIASN/N24 DMN 001-001-001 ----------- no --- -------------- -------------- SS7
PPCA NCAI PRX RCAUSE NPRST SPLITIAM HMSMSC HMSCP SCCPMSGCNV 002-002-002 ---- no none off none no no none
Destination table is (30 of 2000) 2% full Alias table is (0 of 12000) 0% full PPC table is (1 of 100) 10% full;
Example 3 displays the output for all destinations having a specified SCCP Message ConversionIndicator.rtrv-dstn:sccpmsgcnv=udt2xudt
eagle10115 10-05-12 10:00:37 EST EAGLE 43.0.0
DPCA CLLI BEI ELEI ALIASI ALIASN/N24 DMN 001-001-001 ----------- no --- -------------- -------------- SS7 001-001-002 ----------- no --- -------------- -------------- SS7 001-001-003 ----------- no --- -------------- -------------- SS7 001-001-004 ----------- no --- -------------- -------------- SS7
Destination table is (17 of 2000) 1% full Alias table is (0 of 12000) 0% full PPC table is (0 of 10) 0% full
• ent-gtcnv—Enhanced to support XUDT(S) messages.
Measurements
The UDTXUDTF register is added to the SYSTOT-STP, MTCD-STP, and MTCDTH-STP reports. Thisregister counts the number of XUDT(S) <-> UDT(S) conversion failures.
These measurements can be obtained using the Measurements Control Platform, OAM-based, orE5-OAM Integrated Measurements collection method.
Limitations
No limitations are associated with this feature.
Other Changes
The following core enhancements are introduced in Release 44.0:
34910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Change the number of digits in the MAP Routing Info of the returned SRI_ACK messageto 15
The number of digits in the MAP Routing Info portion of the returned SRI_ACK message can beconfigured by the user. A new msrnlen parameter is added to the chg-gsmopts command to allowthe configuration.
See the Commands section for the G-Flex MLR Support for Additional Opcodes feature for an exampleof rtrv-gsmopts output.
E5-TDM does not support Hardware Flow Control
The E5-TDM card does not support hardware flow control on the serial MMI port. If a value of hw orboth is specified for the fc parameter in the chg-trm command for an E5-TDM card, then part of theterminal output may be lost.
In addition, ports set for hardware flow control only operate in KSR mode.
Extended Processing Time Notification
The rept-stat/rtrv-dstn and rept-stat/rtrv-rte commands are updated to display thewarning "Extended processing time may be required" before more than one destination or route statusis displayed.
Example 1 displays output for the rept-stat-dstn command.rept-stat-dstn
tekelecstp 10-10-15 14:59:15 EST EAGLE 43.0.0 rept-stat-dstn Command entered at terminal #4. Extended Processing Time may be Required
DPCA PST SST AST 001-001-003 OOS-MT Idle INACCESS 001-001-004 OOS-MT Idle INACCESS 001-001-005 OOS-MT Idle INACCESS 001-001-006 OOS-MT Idle INACCESS 001-001-007 OOS-MT Idle INACCESS 001-001-008 OOS-MT Idle INACCESS 001-001-009 OOS-MT Idle INACCESS 001-001-010 OOS-MT Idle INACCESS 001-001-011 OOS-MT Idle INACCESS 001-001-012 OOS-MT Idle INACCESS 001-001-013 OOS-MT Idle INACCESS 001-001-014 OOS-MT Idle INACCESS 001-001-015 OOS-MT Idle INACCESS 001-001-016 OOS-MT Idle INACCESS 001-001-017 OOS-MT Idle INACCESS 001-001-018 OOS-MT Idle INACCESS 001-001-019 OOS-MT Idle INACCESS 001-001-020 OOS-MT Idle INACCESS 001-001-021 OOS-MT Idle INACCESS 001-001-022 OOS-MT Idle INACCESS 001-001-023 OOS-MT Idle INACCESS 001-001-024 OOS-MT Idle INACCESS 001-001-025 OOS-MT Idle INACCESS 001-002-003 OOS-MT Idle INACCESS
DPCN PST SST AST
35910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
DPCN24 PST SST AST
DPCI PST SST AST
Command Completed.;
Example 2 displays output for the rept-stat-rte command.rept-stat-rte
tekelecstp 10-10-15 14:59:49 EST EAGLE 43.0.0 rept-stat-rte Command entered at terminal #4. Extended Processing Time may be Required
DPCA PST SST AST 001-001-003 OOS-MT Idle INACCESS 001-001-004 OOS-MT Idle INACCESS 001-001-005 OOS-MT Idle INACCESS 001-001-006 OOS-MT Idle INACCESS 001-001-007 OOS-MT Idle INACCESS 001-001-008 OOS-MT Idle INACCESS 001-001-009 OOS-MT Idle INACCESS 001-001-010 OOS-MT Idle INACCESS 001-001-011 OOS-MT Idle INACCESS 001-001-012 OOS-MT Idle INACCESS 001-001-013 OOS-MT Idle INACCESS 001-001-014 OOS-MT Idle INACCESS 001-001-015 OOS-MT Idle INACCESS 001-001-016 OOS-MT Idle INACCESS 001-001-017 OOS-MT Idle INACCESS 001-001-018 OOS-MT Idle INACCESS 001-001-019 OOS-MT Idle INACCESS 001-001-020 OOS-MT Idle INACCESS 001-001-021 OOS-MT Idle INACCESS 001-001-022 OOS-MT Idle INACCESS 001-001-023 OOS-MT Idle INACCESS 001-001-024 OOS-MT Idle INACCESS 001-001-025 OOS-MT Idle INACCESS 001-002-003 OOS-MT Idle INACCESS
DPCN PST SST AST
DPCN24 PST SST AST
DPCI PST SST AST
Command Completed.;
Example 3 displays truncated output for the rtrv-dstn command.rtrv-dstn
tekelecstp 10-10-15 14:46:12 EST EAGLE 43.0.0 rtrv-dstn Command entered at terminal #4. Extended Processing Time may be Required
DPCA CLLI BEI ELEI ALIASI ALIASN/N24 DMN 001-001-000 stp1 no --- -------------- -------------- SS7 003-001-000 mstp no --- -------------- -------------- SS7 004-001-000 stp4 no --- -------------- -------------- SS7
DESTINATION ENTRIES ALLOCATED: 2000
36910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
FULL DPC(s): 178 EXCEPTION DPC(s): 17 NETWORK DPC(s): 0 CLUSTER DPC(s): 4 TOTAL DPC(s): 199 CAPACITY (% FULL): 10% ALIASES ALLOCATED: 12000 ALIASES USED: 206 CAPACITY (% FULL): 2% X-LIST ENTRIES ALLOCATED: 500
;
Example 4 displays truncated output for the rtrv-rte command.rtrv-rte
tekelecstp 10-10-15 14:52:32 EST EAGLE 43.0.0 rtrv-rte Command entered at terminal #4. Extended Processing Time may be Required
DPCA ALIASI ALIASN/N24 RTX CLLI LSN RC APCA 001-001-000 -------------- -------------- No stp1 e2e1 10 001-001-000 003-001-000 -------------- -------------- No mstp e2e3 10 003-001-000 004-001-000 -------------- -------------- No stp4 e2e4 10 004-001-000 007-001-000 -------------- -------------- No stp7 e2e7 10 007-001-000 002-101-001 -------------- -------------- No ssp201 e2m1s1 10 002-101-001 e2e3 20 003-001-000 002-102-001 -------------- -------------- No ssp202 e2m1s2 10 002-102-001 e2e3 20 003-001-000 001-101-001 -------------- -------------- No ssp101 e2e1 10 001-001-000 e2e4 20 004-001-000 e2e3 30 003-001-000
;
PC_TYPE in Daily Maintenance and Hourly Maintenance Per SSP reports
The new field PC_TYPE is added to the Daily Maintenance (MTCD) and Hourly Maintenance (MTCH)Per SSP reports for enttype=aiq, atinpq, lnp, np, or vflex. The PC_TYPE field is defined as the PointCode type with four valid values: ANSI, ITUI, ITUN, ITUN24. The PC_TYPE field differentiates PointCodes which are numerically identical but are of different types. The output reports can be obtainedusing the Measurements Control Platform, OAM-based, or E5-OAM Integrated Measurements collectionmethod.
Examples of Daily Daily Maintenance Measurements Per SSP FTP Command:
rept-ftp-meas:type=mtcd:enttype=lnp
rept-ftp-meas:type=mtcd:enttype=np
Example of Daily LNP Measurements Per SSP report (MP and E5-OAM)
Example Output File Name:mtcd-ssp_20111006_2400.csv
37910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Example Output File Format:"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","2011-10-06","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON LNP SSP","LAST","2011-10-05","00:00:00","24:00:00",200<cr><lf><cr><lf>"STATUS","SSP","PC_TYPE","SSPQRCV","CLASSGTRQ","LIDBGTRQ","SSPQRCVP","SSPQRCVNP","CLASSGTRQP","CLASSGTRQNP","LIDBGTRQP","LIDBGTRQNP","CNAMGTRQP","CNAMGTRQNP","ISVMGTRQP","ISVMGTRQNP","WSMSCGTRQP","WSMSCGTRQNP"<cr><lf>"K","002-002-100","ANSI",123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999<cr><lf>....."K","002-005-123","ANSI",123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999<cr><lf>
Example of Daily NP Measurements Per SSP report (MP and E5-OAM)
Example Output File Name: mtcd-ssp_20110125_2400.csv
Example Output File Format:"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"e1061001","EAGLE5 43.0.0-63.33.0","2011-01-25","00:00:58","EST ","DAILY MAINTENANCE MEASUREMENTS ON NP SSP","LAST","2011-01-24","00:00:00","24:00:00",3<cr><lf><cr><lf>"STATUS","SSP","PC_TYPE","INPQSCONN","INPQSCONT","INPMRTR","INPMRGTT","GPSRACK","GPSRRLY","GPNOCL","GPNOCLGT","GPSRACKPP","APLRACK","APLRRLY","APNOCL","APNOCLGT","TINPMRCV","TINPMGEN","TINPERR","SMSMOIRCV","SMSMOIERR","SMSMOGRCV","SMSMOGERR","GPSRSMREP","GPSRSMERR","GPSRSMRCV","APSMRQREP","APSMRQERR","APSMSRCV","INPQSCRD","INPQSREL","INPMRCRD","MNPCRD","GPSRNACK"<cr><lf>"K","001-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","101-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","201-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Support for the BLIXP GPL
A new BLIXP GPL is introduced. The BLIXP GPL is a flash GPL that contains a tar image with all ofthe previously independent flash GPLs required for E5-E1T1, E5-ENET, E5-SM4G, and HC-MIM cards.The BLIXP GPL is used to replace the BLBEPM, BLBIOS, BLBSMG, BLCPLD, BLDIAG6, BLROM1,BLVXW6, IMTPCI, and PLDPMC1 GPLs. The replaced GPLs are only available during upgrade to43.0 and during hardware replacement.
The act/init-flash, act/chg/rept-stat/rtrv-gpl, rept-meas, rept-stat/rtrv-card,and rtrv-stp commands are enhanced to support the BLIXP GPL.
Example 1 displays output for the rept-stat-card command.
rept-stat-card:loc=6101:mode=full
tklc9010801 10-12-09 17:25:55 MST EAGLE5 43.0.0 CARD VERSION TYPE GPL PST SST AST 6101 133-043-000 LIME1ATM ATMHC IS-NR Active ----- ALARM STATUS = No Alarms. BLIXP GPL version = 133-044-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = Idle HS CLOCK A = Fault HS CLOCK B = Fault HS CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = EPM A DBD STATUS = Valid DBD TYPE = ATM DBD MEMORY SIZE = 512M
38910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
HW VERIFICATION CODE = ---- CURRENT TEMPERATURE = 37C ( 99F) PEAK TEMPERATURE: = 39C (103F) [02-01-01 21:00] SIGNALING LINK STATUS SLK PST LS CLLI A IS-NR sc8b095i sc8b095i B IS-NR sc5b092n sc5b092n TVG STATUS SNM TVG RESULT = 24 hr: G-----, 5 min: ------ SLAN TVG RESULT = 24 hr: ------, 5 min: ------ SCCP TVG RESULT = 24 hr: ------, 5 min: ------ INM TVG RESULT = 24 hr: G-----, 5 min: ------
Command Completed.;
Example 2 displays truncated output for the rept-stat-gpl command.
rept-stat-gpl:display=all
eagle10110 10-08-15 18:53:54 EST EAGLE 43.0.0 GPL Auditing ON
GPL CARD RUNNING APPROVED TRIAL GLS 1107 133-051-000 133-051-000 133-051-000 IMT 133-051-000 133-051-000 133-051-000 GLS 4308 133-051-000 133-051-000 133-051-000 IMT 133-051-000 133-051-000 133-051-000 OAMHC 1113 133-051-000 ALM 028-051-000 028-051-000 * BLMCAP 133-051-000 133-051-000 133-051-000 OAMHC 1115 028-051-000 028-051-000 028-051-000 * BLMCAP 133-051-000 133-051-000 133-051-000 VSCCP 3117 001-051-013 001-051-013 001-051-010 BPDCM 133-042-000 133-042-000 133-042-000 VSCCP 3201 001-051-013 001-051-013 001-051-010 BPDCM 133-042-000 133-042-000 133-042-000 IPGWI 2102 133-051-000 133-051-000 133-051-000 BPDCM 133-042-000 133-042-000 133-042-000 IPGWI 2115 133-051-000 133-051-000 133-051-000 BPDCM 133-042-000 133-042-000 133-042-000 IPS 5201 133-051-000 133-051-000 133-051-000 BPDCM 133-042-000 133-042-000 133-042-000 MCP 1108 133-051-000 133-051-000 133-051-000 BPDCM2 133-042-000 133-042-000 133-042-000 MCP 5313 133-051-000 133-051-000 133-051-000 BPDCM2 133-042-000 133-042-000 133-042-000 SS7HC 2201 133-051-000 133-051-000 133-051-000 BLIXP 133-050-000 133-050-000 027-051-000 SS7HC 3307 133-051-000 133-051-000 133-051-000 BLIXP 133-050-000 133-050-000 027-051-000 IPSG 3116 133-051-000 133-051-000 133-051-000 BLIXP 133-050-000 133-050-000 027-051-000 IPSG 4103 133-051-000 133-051-000 133-051-000 BLIXP 133-050-000 133-050-000 027-051-000 PKTGHC 1111 163-051-000 163-051-000 ----------- BLIXP 133-050-000 133-050-000 027-051-000
Command Completed.;
Example 3 displays truncated output for the rtrv-gpl command.
rtrv-gpl
e1080402 10-10-10 15:16:33 EST EAGLE 43.0.0
39910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
GPL CARD RELEASE APPROVED TRIAL REMOVE TRIAL EOAM 1114 128-003-000 128-003-000 128-003-000 128-003-000 EOAM 1116 128-003-000 128-003-000 ----------- ----------- SCCP 1114 128-002-000 128-002-000 128-002-000 128-002-000 SCCP 1116 128-002-000 128-002-000 128-002-000 ----------- GLS 1114 128-002-000 128-002-000 128-002-000 128-002-000 GLS 1116 128-002-000 128-002-000 128-002-000 ----------- CDU 1114 128-000-000 128-000-000 128-000-000 128-002-000 CDU 1116 128-000-000 128-000-000 128-002-000 ----------- STPLAN 1114 128-001-000 128-001-000 125-001-000 128-001-000 STPLAN 1116 128-001-000 128-001-000 125-001-000 ----------- IMT 1114 128-001-000 128-001-000 125-001-000 128-001-000 IMT 1116 128-001-000 128-001-000 125-001-000 ----------- ATMANSI 1114 128-002-000 128-002-000 125-002-000 128-002-000 ATMANSI 1116 128-002-000 128-002-000 128-002-000 ----------- HIPR 1114 128-001-000 128-005-000 125-005-000 128-005-000 HIPR 1116 128-001-000 128-005-000 125-005-000 ----------- SS7HC 1114 128-001-000 128-001-000 125-001-000 128-001-000 SS7HC 1116 128-001-000 128-001-000 125-001-000 ----------- IPLHC 1114 097-003-000 097-003-000 028-003-011 097-003-000 IPLHC 1116 097-003-000 097-003-000 028-003-011 ----------- IPGHC 1114 097-003-000 097-003-009 ALM 097-003-001 097-003-009 IPGHC 1116 097-003-000 097-003-009 ALM 097-003-001 ----------- IPSHC 1114 128-001-000 128-001-000 128-001-000 ----------- IPSHC 1116 128-001-000 128-001-000 128-001-000 128-001-000 SLANHC 1114 128-002-000 128-002-000 128-002-000 ----------- SLANHC 1116 128-002-000 128-002-000 128-002-000 128-002-000 ERTHC 1114 128-002-000 128-002-000 128-002-000 ----------- ERTHC 1116 128-002-000 128-002-000 128-002-000 128-002-000 SCCPHC 1114 128-019-000 128-019-000 128-019-000 ----------- SCCPHC 1116 128-019-000 128-019-000 128-019-000 128-019-000 HIPR2 1114 128-022-000 128-022-000 128-022-000 128-022-000 HIPR2 1116 128-022-000 128-022-000 128-022-000 ----------- BLIXP 1114 163-033-000 163-033-000 ----------- ----------- BLIXP 1116 163-033-000 163-033-000 ----------- -----------
;
Example 4 displays truncated output for the rtrv-gpl command when E5 cards are used.
rtrv-gpl
tklc9051301 10-08-17 10:13:26 EST EAGLE5 43.0.0 GPL Auditing ON
GPL CARD RELEASE APPROVED TRIAL REMOVE TRIAL EOAM 1114 133-033-000 133-033-000 ----------- ----------- EOAM 1116 133-033-000 133-033-000 ----------- ----------- EOAM 1115 ----------- ----------- ----------- ----------- GLS 1114 133-033-000 133-033-000 133-033-000 ----------- GLS 1116 133-033-000 133-033-000 133-033-000 ----------- GLS 1115 ----------- ----------- ----------- ----------- CDU 1114 163-033-000 163-033-000 ----------- ----------- CDU 1116 163-033-000 163-033-000 ----------- ----------- CDU 1115 ----------- ----------- ----------- ----------- IMT 1114 133-033-000 133-033-000 133-033-000 ----------- IMT 1116 133-033-000 133-033-000 133-033-000 ----------- IMT 1115 ----------- ----------- ----------- ----------- IPLIM 1114 133-033-000 133-033-000 133-033-000 ----------- IPLIM 1116 133-033-000 133-033-000 133-033-000 ----------- IPLIM 1115 ----------- ----------- ----------- ----------- IPLIMI 1114 133-033-000 133-033-000 133-033-000 ----------- IPLIMI 1116 133-033-000 133-033-000 133-033-000 ----------- IPLIMI 1115 ----------- ----------- ----------- ----------- MPLG 1114 163-033-000 163-033-000 163-033-000 -----------
40910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
MPLG 1116 163-033-000 163-033-000 163-033-000 ----------- MPLG 1115 ----------- ----------- ----------- ----------- HIPR 1114 133-033-000 133-033-000 133-033-000 ----------- HIPR 1116 133-033-000 133-033-000 133-033-000 ----------- HIPR 1115 ----------- ----------- ----------- ----------- SS7HC 1114 133-033-000 133-033-000 133-033-000 ----------- SS7HC 1116 133-033-000 133-033-000 133-033-000 ----------- SS7HC 1115 ----------- ----------- ----------- ----------- GLSHC 1114 133-033-000 133-033-000 133-033-000 ----------- GLSHC 1116 133-033-000 133-033-000 133-033-000 ----------- GLSHC 1115 ----------- ----------- ----------- ----------- PKTGEN 1114 163-033-000 163-033-000 ----------- ----------- PKTGEN 1116 163-033-000 163-033-000 ----------- ----------- PKTGEN 1115 ----------- ----------- ----------- ----------- SCCPHC 1114 133-033-000 133-033-000 133-033-000 ----------- SCCPHC 1116 133-033-000 133-033-000 133-033-000 ----------- SCCPHC 1115 ----------- ----------- ----------- ----------- PKTGHC 1114 163-033-000 163-033-000 ----------- ----------- PKTGHC 1116 163-033-000 163-033-000 ----------- ----------- PKTGHC 1115 ----------- ----------- ----------- ----------- BLIXP 1114 163-033-000 163-033-000 ----------- ----------- BLIXP 1116 163-033-000 163-033-000 ----------- ----------- BLIXP 1115 ----------- ----------- ----------- -----------
;
Update to the msucount Command
The msucount command is updated to remove all references to the -d and -s sname options.
Example 1 displays a help report for IPGWx cards.pass:loc=1105:cmd="msucount -h"
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0
Usage: msucount [ [-l [link]] | [-b [link]] | [[-a aname]] [[-x rc] | [-k [rtkey] [-p pctype] [-t keytype] []] ] [-f] [-r] [-h [full]]
Options: -l display signaling link report -b display signaling link bytes report -a display association report
-x routing key report using routing context -k routing key report using MTP3 parameters rtkey :: ([dpc][:si][:opc | :ssn][:cics][:cice]) -p pctype :: (ANSI, ITUI, ITUN, ITUN24, ITUIS, ITUNS) -t routing key type keytype :: (<full>, partial, default) -d display dynamic routing key -f display full report -r resets the specified counts -h display command help (brief or full)
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0 MSUCOUNT command complete
;
Example 2 displays a full help report for IPGWx cards.
41910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
pass:loc=1105:cmd="msucount -h full"
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0
Usage: msucount [ [-l [link]] | [-b [link]] | [[-a aname]] [[-x rc] | [-k [rtkey] [-p pctype] [-t keytype]] ] [-f] [-r] [-h [full]]
Options: -l display signaling link report -b display signaling link bytes report -a display association report -x routing key report using routing context -k routing key report using MTP3 parameters rtkey :: ([dpc][:si][:opc | :ssn][:cics][:cice]) -p pctype :: (ANSI, ITUI, ITUN, ITUN24, ITUIS, ITUNS) -t routing key type keytype :: (<full>, partial, default) -d display dynamic routing key -f display full report -r resets the specified counts -h display command help (brief or full)
-k option details:
Use the -p option along with -k to specify the SS7 network domain and point code format for the network. The SS7IPGW default pctype is ANSI. The IPGWI default pctype is ITUI.
Network PC Format Notes ------- --------- -------------------------------------- ANSI N-C-M ITUN N Non-Spare ITU National, no group code ITUN N-GC Non-Spare ITU National with group code ITUI Z-A-I Non-Spare ITU International ITUN24 N-C-M Non-Spare ITU National, 24-bits ITUNS N Spare ITU National, no group code ITUNS N-GC Spare ITU National with group code ITUIS Z-A-I Spare ITU International
Use the -t option along with -k to specify certain MTP3 and user part MSU fields as wildcards for the routing key.
SS7 Traffic Partition RTKEY Parameter Example --------------------------------- ---------------------------- Any User Part to DPC 1-1-1 -k 1-1-1 -t partial SCCP to DPC 1-1-1 -k 1-1-1:3 -t partial ISUP to DPC 1-1-1 -k 1-1-1:5 -t partial TUP to DPC 1-1-1 -k 1-1-1:4 -t partial QBICC to DPC 1-1-1 -k 1-1-1:13 -t partial SI [0-2,6-12,14,15] to DPC 1-1-1 -k 1-1-1:SI SCCP SSN 5 to DPC 1-1-1 -k 1-1-1:3:5 ISUP to DPC 1-1-1 from OPC 2-2-2 -k 1-1-1:5:2-2-2 -t partial TUP to DPC 1-1-1 from OPC 2-2-2 -k 1-1-1:4:2-2-2 -t partial QBICC to DPC 1-1-1 from OPC 2-2-2 -k 1-1-1:13:2-2-2 -t partial ISUP CIC 1 to 1-1-1 from 2-2-2 -k 1-1-1:5:2-2-2:1 TUP CIC 1 to 1-1-1 from 2-2-2 -k 1-1-1:4:2-2-2:1 QBICC CIC 1 to 1-1-1 from 2-2-2 -k 1-1-1:13:2-2-2:1 ISUP CIC 0-5 to 1-1-1 from 2-2-2 -k 1-1-1:5:2-2-2:0:5 TUP CIC 0-5 to 1-1-1 from 2-2-2 -k 1-1-1:4:2-2-2:0:5 QBICC CIC 0-5 to 1-1-1 from 2-2-2 -k 1-1-1:13:2-2-2:0:5 Default Routing Key -k -t default
42910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0 MSUCOUNT command complete
Example 3 displays a help report for IPLIMx cards.pass:loc=1103:cmd="msucount -h"
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0
Usage: msucount [ [-l [link]] | [-b [link]] ] | [ [-a aname] ] [-r] [-h]
Options: -l display signaling link report -b display signaling link bytes report -a display association report -r resets the specified counts -h display command help
rlghncxa03w 10-08-17 16:02:05 EST EAGLE 43.0.0 MSUCOUNT command complete
;
Update to the netstat Command
The netstat -i command output on non-E5 cards is updated to increase readability.pass: loc=1105: cmd="netstat -i"
eagle20004 11-01-07 07:59:20 EST EAGLE 43.0.0 pass: loc=1105: cmd="netstat -i" Command entered at terminal #1.;
eagle20004 11-01-07 07:59:20 EST EAGLE 43.0.0 PASS: Command sent to card;
eagle20004 11-01-07 07:59:20 EST EAGLE 43.0.0 DPLend (unit number 0): Flags: (0x63) UP BROADCAST ARP RUNNING 10MB HDX DIX Type: ETHERNET_CSMACD Internet address: 172.20.48.25 Broadcast address: 172.20.51.255 Netmask 0xffff0000 Subnetmask 0xfffffc00 Ethernet address is 00:00:00:00:00:00 Metric is 0 Maximum Transfer Unit size is 485 1 packets received; 1 packets sent 0 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped seeq (unit number 1): Flags: (0x63) UP BROADCAST ARP RUNNING 10MB HDX DIX Type: ETHERNET_CSMACD Internet address: 192.168.55.112 Broadcast address: 192.168.55.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:00:17:04:00:62 Metric is 0 Maximum Transfer Unit size is 1500
43910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
28 packets received; 16 packets sent 13 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped lo (unit number 0): Flags: (0x8069) UP LOOPBACK MULTICAST ARP RUNNING 10MB HDX DIX Type: SOFTWARE_LOOPBACK Internet address: 127.0.0.1 Netmask 0xff000000 Subnetmask 0xff000000 Metric is 0 Maximum Transfer Unit size is 32768 6 packets received; 6 packets sent 0 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped seeq (unit number 0): Flags: (0x63) UP BROADCAST ARP RUNNING 10MB HDX DIX Type: ETHERNET_CSMACD Internet address: 192.168.100.112 Broadcast address: 192.168.100.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:00:17:04:00:61 Metric is 0 Maximum Transfer Unit size is 1500 5 packets received; 1 packets sent 5 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped
Update to rept-imt-lvl2 Command
The rept-imt-lvl2 command output is updated to provide greater readability. In addition, theAverage ack time field is replaced with the Retx Count field, which displays retransmitted MSUs.
Note: This example displays truncated output.
rept-imt-lvl2:sloc=1101:eloc=1115:loc=1101
rlghncxa03w 10-09-08 14:49:58 EST EAGLE5 43.0.0 Retrieving data from card... -------------------------------------------------------------------------- Card: H'00f0 Bus: A
Field f0 f1 f2 f3 f4 f5 f6 f7 ----- ---- ---- ---- ---- ---- ---- ---- ---- Link Status ALGN ALGN ALGN -OS- -OS- -OS- ALGN -OS- OS Count (dec) 2 7 4 0 0 0 16 0 Transmit BSN (dec) 0 148 1 0 0 0 0 0 Transmit FSN (dec) 0 139 151 0 0 0 0 0 Receive BSN (dec) 0 139 151 0 0 0 0 0 Receive FSN (dec) 1 149 2 1 1 1 1 1 Unack Messages (dec) 0 0 0 0 0 0 0 0 Invalid Length (dec) 0 0 0 0 0 0 0 0 Invalid rx BSN (dec) 0 0 0 0 0 0 0 0 Invalid rx FSN (dec) 0 0 0 0 0 0 0 0 Invalid LSSU (dec) 0 0 0 0 0 0 0 0 Invalid ASU (dec) 0 0 0 0 0 0 0 0 RTB Address (hex) 0000 0000 0000 0000 0000 0000 0000 0000 Retx Count (dec) 0 0 0 0 0 0 0 0 Minimum ack time (ms) 0 0 0 0 0 0 0 0 Maximum ack time (ms) 0 0 0 0 0 0 0 0
44910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
;
rlghncxa03w 10-09-08 14:49:59 EST EAGLE5 43.0.0 -------------------------------------------------------------------------- Card: H'00f0 Bus: A
Field f8 f9 fa fb ----- ---- ---- ---- ---- Link Status ALGN -OS- ALGN ALGN OS Count (dec) 16 0 1 2 Transmit BSN (dec) 0 0 158 168 Transmit FSN (dec) 1 0 9 106 Receive BSN (dec) 1 0 9 106 Receive FSN (dec) 1 1 159 169 Unack Messages (dec) 0 0 0 0 Invalid Length (dec) 0 0 0 0 Invalid rx BSN (dec) 0 0 0 0 Invalid rx FSN (dec) 0 0 0 0 Invalid LSSU (dec) 0 0 0 0 Invalid ASU (dec) 0 0 0 0 RTB Address (hex) 0000 0000 0000 0000 Retx Count (dec) 0 0 0 0 Minimum ack time (ms) 0 0 0 0 Maximum ack time (ms) 0 0 0 0;
rlghncxa03w 10-09-08 14:50:00 EST EAGLE5 43.0.0 -------------------------------------------------------------------------- Card: H'00f0 Bus: A
Field 00 01 02 03 04 05 06 07 ----- ---- ---- ---- ---- ---- ---- ---- ---- Link Status ALGN -OS- -OS- -OS- ALGN ALGN ALGN -OS- OS Count (dec) 11 0 0 0 4 4 4 0 Transmit BSN (dec) 0 0 0 0 0 0 0 0 Transmit FSN (dec) 1 0 0 0 1 1 1 0 Receive BSN (dec) 1 0 0 0 1 1 1 0 Receive FSN (dec) 1 1 1 1 1 1 1 1 Unack Messages (dec) 0 0 0 0 0 0 0 0 Invalid Length (dec) 0 0 0 0 0 0 0 0 Invalid rx BSN (dec) 0 0 0 0 0 0 0 0 Invalid rx FSN (dec) 0 0 0 0 0 0 0 0 Invalid LSSU (dec) 0 0 0 0 0 0 0 0 Invalid ASU (dec) 0 0 0 0 0 0 0 0 RTB Address (hex) 0000 0000 0000 0000 0000 0000 0000 0000 Retx Count (dec) 0 0 0 0 0 0 0 0 Minimum ack time (ms) 0 0 0 0 0 0 0 0 Maximum ack time (ms) 0 0 0 0 0 0 0 0;
rlghncxa03w 10-09-08 14:50:01 EST EAGLE5 43.0.0 -------------------------------------------------------------------------- Card: H'00f0 Bus: A
Field 08 09 0a 0b 0c 0d 0e 0f ----- ---- ---- ---- ---- ---- ---- ---- ---- Link Status -OS- -OS- ALGN ALGN ALGN ALGN -OS- -OS- OS Count (dec) 0 0 4 4 1 1 0 0 Transmit BSN (dec) 0 0 0 0 0 0 0 0 Transmit FSN (dec) 0 0 0 0 0 0 0 0 Receive BSN (dec) 0 0 0 0 0 0 0 0 Receive FSN (dec) 1 1 1 1 1 1 1 1 Unack Messages (dec) 0 0 0 0 0 0 0 0 Invalid Length (dec) 0 0 0 0 0 0 0 0 Invalid rx BSN (dec) 0 0 0 0 0 0 0 0
45910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Invalid rx FSN (dec) 0 0 0 0 0 0 0 0 Invalid LSSU (dec) 0 0 0 0 0 0 0 0 Invalid ASU (dec) 0 0 0 0 0 0 0 0 RTB Address (hex) 0000 0000 0000 0000 0000 0000 0000 0000 Retx Count (dec) 0 0 0 0 0 0 0 0 Minimum ack time (ms) 0 0 0 0 0 0 0 0 Maximum ack time (ms) 0 0 0 0 0 0 0 0
rlghncxa03w 10-09-08 14:50:05 EST EAGLE5 43.0.0 -------------------------------------------------------------------------- Card: H'00f0 Bus: A
Field 28 ----- ---- Link Status -OS- OS Count (dec) 0 Transmit BSN (dec) 0 Transmit FSN (dec) 0 Receive BSN (dec) 0 Receive FSN (dec) 1 Unack Messages (dec) 0 Invalid Length (dec) 0 Invalid rx BSN (dec) 0 Invalid rx FSN (dec) 0 Invalid LSSU (dec) 0 Invalid ASU (dec) 0 RTB Address (hex) 0000 Retx Count (dec) 0 Minimum ack time (ms) 0 Maximum ack time (ms) 0
;
Update to the rept-stat-imt Command
The rept-stat-imt command is updated to display IMT System Alarms.
Example 1 displays output for an abbreviated report.rept-stat-imt
rlghncxa03w 10-12-17 11:58:39 EST EAGLE 43.0.0
IMT SYSTEM ALARM STATUS = No Alarms.
IMT PST SST AST A IS-NR Active ----- ALARM STATUS = No Alarms.
IMT PST SST AST B IS-NR Active ----- ALARM STATUS = No Alarms.
Command Completed.;
Example 2 displays output for a full report.rept-stat-imt:mode=full
rlghncxa03w 10-12-17 12:03:19 EST EAGLE 43.0.0
IMT SYSTEM
46910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
ALARM STATUS = * 0110 Failure detected on one IMT bus
IMT PST SST AST A IS-NR Active ----- ALARM STATUS = No Alarms.
IMT PST SST AST B OOS-MT-DSBLD Fault ----- ALARM STATUS = ** 0108 Major IMT failure detected.
CARDS WITH ACTIVE IMT B ALARMS: CARD DATE TIME 1102 04-02-23 11:59:23 1103 04-02-23 12:01:23 1204 04-02-23 23:14:07 1205 04-02-23 23:14:07 1206 04-02-23 23:14:07
Command Completed.;
Update to the rept-stat-rtkey Command
The rept-stat-rtkey command output is updated to provide greater readability.rept-stat-rtkey
rlghncxa03w 10-10-27 14:59:11 EST EAGLE 43.0.0 SRKQ = 250
Static Route Key table is (50 of 250) 20% full
Static Route Key Socket Association table is (80 of 4000) 2% full
;
Operational Changes
Release 44.0 contains new and updated alarms and error messages for feature and non-feature items.
UIMs
Hybrid INP/IDPR Relay Service
Table 2: UIM: Hybrid INP/IDPR Relay Service
Output GroupFormat1382UIM
Updated for 43.0Action
LSS: Too many digitsfor DRA parameter
Old data
APSSI13Too many digits forDRA parameter
New data
47910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
G-Flex MLR Support for Additional Opcodes
Table 3: UIM: G-Flex MLR Support for Additional Opcodes
Output GroupFormat1448UIM
Added for 43.0Action
Old data
APSSI13G-Flex MLR: Op w/oIMSI/MSISDN skipped
New data
Multiple IDPR Instances
Table 4: UIM: Multiple IDPR Instances
Output GroupFormat1392UIM
Updated for 43.0Action
GTTI1IDPRCDPN NPPSERVICE is Disabled
Old data
GTTI1IDPRCDPN(X) NPPSERVICE is OFF
New data
Output GroupFormat1393UIM
Updated for 43.0Action
GTTI1IDPRCGPN NPPService is Disabled
Old data
GTTI1IDPRCGPN NPPSERVICE is OFF
New data
XUDT Conversion Enhancements
Table 5: UIMs: XUDT Conversion Enhancements
Output GroupFormat1446UIM
Added for 43.0Action
Old data
GTTI43XUDT UDT Conversionfailed
New data
Output GroupFormat1447UIM
Added for 43.0Action
Old data
48910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
GTTI43Cnvrsn Discard: invsegmentation parm
New data
Non-feature UIM
Table 6: UIM: Non-Feature
Output GroupFormat1449UIM
Added for 43.0Action
Old data
GWSI21Binding Failed forscreen set: <screen setname>
New data
The formats of the following UIMs were updated from I1 to I13:
• 1384: G-Flex MLR: Op without IMSI erroneous• 1385: G-Flex MLR: Op without IMSI skipped• 1386: G-Flex MLR: Op with bad TCAP skipped• 1387: G-Flex MLR: Op with bad IMSI skipped
Hardware Verification Code
Table 7: Hardware Verification Code: 3 ATM Links per E5-ATM Card
UAMNew?DescriptionCard TypeHardwareVerification Code
297YSingle Port ATMcard with incorrectlink configured
LIMATM,LIME1-ATM
136
Error Messages
3 Links per E5-ATM Card
Table 8: Error Messages: 3 Links per E5-ATM Card
Used by CommandNew?Error MessageResponse ID Code
ent-slkNCard must be inhibitedbefore executing thiscommand
E2603
ent-slkYVCI value greater than16383 not allowed
E5437
49910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Used by CommandNew?Error MessageResponse ID Code
ent-slkY3 Links per E5-ATMcard feature must beenabled
E5438
enable-ctrl-featYATM link with VCIgreater than 16383 exists
E5439
ent-slkYNumber of ATM cardswith 3 links exceedsallowable quantity
E5462
Error Message: 10,000 Routesets
Table 9: Error Message: 10,000 Routesets
Used by CommandNew?Error MessageResponse ID Code
chg-dbNBoth OAM cards must
be of the same typeE3084
copy-disk
enable-ctrl-featNUnsupported Hardwareis equipped in thesystem
E4581
Error Messages: Fall-back to GTT after LNP MR service
Table 10: Error Messages: Fall-back to GTT after LNP MR service
Used by CommandNew?Error MessageResponse ID Code
chg-lnp-servNService Type is alreadyin LNP database
E3140
ent-lnp-servNTT, TTN, & DVparameters are notallowed with ALIAS
E3186
ent/chg-lnp-servNEGTT must be ONE3557
ent/chg-lnp-servNSame option in ON &OFF params cannot bespecified
E4732
ent/chg/dlt/rtrv-lnp-servNUnable to access GTTAction table
E5067
ent/chg-lnp-servNGTT Action Id does notexist
E5071
ent/chg-lnp-servNInvalid action typeE5172
50910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Used by CommandNew?Error MessageResponse ID Code
ent/chg-lnp-servNDefault ACTID mustnot be specified asNONE
E5298
Error Messages: G-Flex MLR Support
Table 11: Error Messages: G-Flex MLR Support
Used by CommandNew?Error MessageResponse ID Code
chg-gsmoptsYSame option can't bespec in
E5429
MAPLYRRTGON andMAPLYRRTGOFF
chg-gsmoptsYIf MAPLYRRTGON/MAPLYRRTGOFF is
E5430
ALL no option can bespec
chg-gsmoptsYIf MAPLYRRTGON isALL, MAPLYRRTGOFFcannot be specified
E5431
chg-gsmoptsYIf MAPLYRRTGOFF isALL, MAPLYRRTGONcannot be specified
E5432
Error Message: Hybrid INP/IDP Relay Service
Table 12: Error Message: Hybrid INP/IDP Relay Service
Used by CommandNew?Error MessageResponse ID Code
chg-measoptsNSame option in ON &
OFF params cannot bespecified
E4732
chg-ttropts
Error Message: Multiple IDP Relay Instances
Table 13: Error Message: Multiple IDP Relay Instances
Used by CommandNew?Error MessageResponse ID Code
chg-ctrl-featNAt least 1IDPRCDPN(X) srvc
E4861
must be ON to turn ONIDPR FEAT
51910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Error Messages: PCT
Table 14: Error Messages: PCT
Used by CommandNew?Error MessageResponse ID Code
ent/dlt/rtrv-pctNInvalid parametercombination specified
E2155
ent/dlt/rtrv-pctNPoint code matches aSTP capability pointcode
E2167
ent/dlt/rtrv-pctNPoint code matches aSTP point code
E2168
ent/dlt/rtrv-pctNPoint code out of rangeE2169
ent/dlt/rtrv-pctNMissing parameterE2379
ent/dlt/rtrv-pctNPoint code does notexist in the routing table
E2417
ent/dlt/rtrv-pctNDPC must have at leastone route defined
E2642
ent-pctNFailed reading the routetable
E2648
ent/dlt/rtrv-pctNFull Point Code must bespecified
E3090
ent/dlt/rtrv-pctNCIC outside of validrange for SI
E3878
ent/dlt/rtrv-pctNPoint code matches aSTP secondary pointcode.
E4238
ent/dlt/rtrv-pctNEnd value must begreater than or equal toa starting value
E4404
ent/dlt/rtrv-pctNCIC must be specified ifECIC is specified
E4580
ent/dlt/rtrv-pctNPoint code typemismatch
E4606
ent-pctYPCT table is fullE5390
chg-lsoptsYPCT feature must be
enabledE5391
chg-stpopts
ent/dlt-pct
rtrv-ls
52910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Used by CommandNew?Error MessageResponse ID Code
ent/dlt/rtrv-pctYThe PCT table is corruptor cannot be found
E5392
ent-pctYDuplicate keys are notallowed
E5393
ent/dlt/rtrv-pctYGroup Code of EPC,RealPC and FiltPC mustmatch
E5394
enable-ctrl-featYMaximum PCTQuantity FAK alreadyenabled
E5395
enable-ctrl-featYLarger PCT QuantityFAK is required
E5396
dlt-rteYCannot delete last routeto DPC referenced inPCT table
E5397
ent-pctYMax no of uniqueEPCs/RealPCs cannotexceed 250
E5398
ent-pctYMax no of PCTTranslations per
E5399
EPC/RealPC cannotexceed 100
ent/dlt/rtrv-pctYSpare point code is notallowed
E5400
ent/dlt/rtrv-pctYSingle translation entrynot found
E5401
ent/dlt/rtrv-pctYPrivate point code is notallowed
E5402
ent/dlt/rtrv-pctYInvalid SI valuespecified
E5424
ent/dlt/rtrv-pctYECICS/ECICE andRCICS/RCICE shouldbe in same range
E5426
ent/dlt/rtrv-pctYECIC/Real CIC rangecan't be same if EPC issame as Real PC
E5433
ent/dlt/rtrv-pctYOnly one of FILTPC/A,FILTPCI, or FILTPCNmay be specified
E5440
53910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Used by CommandNew?Error MessageResponse ID Code
chg-sidYPoint Code matches an
Emulated Point Code inPCT table
E5466
ent-spc
Error Message: XUDT UDT Conversion
Table 15: Error Message: XUDT UDT Conversion
Used by CommandNew?Error MessageResponse ID Code
ent/chg/rtrv-dstnYXUDT UDT Conversionfeature must beactivated
E5384
Non Feature-Related Error Messages
Table 16: Non Feature-Related Error Messages
Used by CommandNew?Error MessageResponse ID Code
rtrv-srvselNEGTT must be ONE3557
chg-measNCOLLECT can't be ONif COLLECT15MIN &
E3693
PLATFORMENABLEare ON
ent-appl-rtkeyNInvalid combination ofparameters for a defaultrouting key
E4067
dlt-dstnYCannot delete DSTNthat has ExceptionRoute
E5434
tst-imtNTarget bus must beIS-NR or IS-ANR
E5188
Customer Care Center
The Tekelec Customer Care Center is your initial point of contact for all product support needs. Arepresentative takes your call or email, creates a Customer Service Request (CSR) and directs yourrequests to the Tekelec Technical Assistance Center (TAC). Each CSR includes an individual trackingnumber. Together with TAC Engineers, the representative will help you resolve your request.
The Customer Care Center is available 24 hours a day, 7 days a week, 365 days a year, and is linkedto TAC Engineers around the globe.
54910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Tekelec TAC Engineers are available to provide solutions to your technical questions and issues 7days a week, 24 hours a day. After a CSR is issued, the TAC Engineer determines the classification ofthe trouble. If a critical problem exists, emergency procedures are initiated. If the problem is not critical,normal support procedures apply. A primary Technical Engineer is assigned to work on the CSR andprovide a solution to the problem. The CSR is closed when the problem is resolved.
Tekelec Technical Assistance Centers are located around the globe in the following locations:
Tekelec - Global
Email (All Regions): support@tekelec.com
• USA and Canada
Phone:
1-888-FOR-TKLC or 1-888-367-8552 (toll-free, within continental USA and Canada)
1-919-460-2150 (outside continental USA and Canada)
TAC Regional Support Office Hours:
8:00 a.m. through 5:00 p.m. (GMT minus 5 hours), Monday through Friday, excluding holidays• Caribbean and Latin America (CALA)
Phone:
USA access code +1-800-658-5454, then 1-888-FOR-TKLC or 1-888-367-8552 (toll-free)
TAC Regional Support Office Hours (except Brazil):
10:00 a.m. through 7:00 p.m. (GMT minus 6 hours), Monday through Friday, excluding holidays
• Argentina
Phone:
0-800-555-5246 (toll-free)• Brazil
Phone:
0-800-891-4341 (toll-free)
TAC Regional Support Office Hours:
8:00 a.m. through 5:48 p.m. (GMT minus 3 hours), Monday through Friday, excluding holidays• Chile
Phone:
1230-020-555-5468• Colombia
Phone:
01-800-912-0537• Dominican Republic
Phone:
1-888-367-8552
55910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
• Mexico
Phone:
001-888-367-8552• Peru
Phone:
0800-53-087• Puerto Rico
Phone:
1-888-367-8552 (1-888-FOR-TKLC)• Venezuela
Phone:
0800-176-6497
• Europe, Middle East, and Africa
Regional Office Hours:
8:30 a.m. through 5:00 p.m. (GMT), Monday through Friday, excluding holidays
• Signaling
Phone:
+44 1784 467 804 (within UK)• Software Solutions
Phone:
+33 3 89 33 54 00
• Asia
• India
Phone:
+91 124 436 8552 or +91 124 436 8553
TAC Regional Support Office Hours:
10:00 a.m. through 7:00 p.m. (GMT plus 5 1/2 hours), Monday through Saturday, excludingholidays
• Singapore
Phone:
+65 6796 2288
TAC Regional Support Office Hours:
9:00 a.m. through 6:00 p.m. (GMT plus 8 hours), Monday through Friday, excluding holidays
56910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Related Publications
For information about additional publications that are related to this document, refer to the RelatedPublications document. The Related Publications document is published as a part of the ReleaseDocumentation and is also published as a separate document on the Tekelec Customer Support Site.
Customer Training
Tekelec offers a variety of technical training courses designed to provide the knowledge and experiencerequired to properly provision, administer, operate, and maintain Tekelec products. To enroll in anyof the courses or for schedule information, contact the Tekelec Training Center at (919) 460-3064 orE-mail training@tekelec.com.
A complete list and schedule of open enrollment can be found at www.tekelec.com.
Locate Product Documentation on the Customer Support Site
Access to Tekelec's Customer Support site is restricted to current Tekelec customers only. This sectiondescribes how to log into the Tekelec Customer Support site and locate a document. Viewing thedocument requires Adobe Acrobat Reader, which can be downloaded at www.adobe.com.
1. Log into the Tekelec Customer Support site.
Note: If you have not registered for this new site, click the Register Here link. Have your customernumber available. The response time for registration requests is 24 to 48 hours.
2. Click the Product Support tab.3. Use the Search field to locate a document by its part number, release number, document name, or
document type. The Search field accepts both full and partial entries.4. Click a subject folder to browse through a list of related files.5. To download a file to your location, right-click the file name and select Save Target As.
EAGLE 5 ISS Card Overview Table
The EAGLE 5 ISS Card Overview table is a resource table that provides an overview of informationfor cards that can be provisioned in the EAGLE 5 ISS. For a detailed description of supported hardware,see Hardware Baseline.
This table lists the following card information:
• The name of the card on the card label• The card part number• The provisioned card type
57910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
• The number of shelf slots that the card occupies (1 or 2)• The number of physical ports on the card• The maximum number of links that can be assigned to the card• The GPLs and applications that can run on the card
Table 17: EAGLE 5 ISS Card Overview Table
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Name asshown on card
label
stplanbpdcm
vwxslan1 IPService2
2dcm870-1945-01
870-1945-02
870-1945-03DCM
iplimbpdcm
22
870-1984-01(DCMX)
iplimiiplim
iplimi
ss7ipgwbpdcm
12ipgwi
ss7ipgw
ipgwi
eroutebpdcm
eroute2 IPService22stc
stplanbpdcm
vwxslan1 IPService
21dcm
870-2372-01
870-2372-08
870-2372-13^EDCM
(SSEDCM)
iplimbpdcm
8iplimi
iplim
iplimi
ss7ipgwbpdcm
1ipgwi
ss7ipgw
ipgwi
eroutebpdcm
eroute2 IPService21stc870-2372-01
58910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Name asshown on card
label
stplanbpdcm
vwxslan1 IPService21dcm
870-2508-01
870-2508-02^
EDCM-A
(SSEDCM)eroute
bpdcm
eroute2 IPService21stc
vsccp
bpdcm
vsccp2 IPservice22dsm
1 GB MEM
870-1984-02
DSM†
gls
870-1984-08
870-1984-09
870-1984-15^
870-1984-17^
2 GB MEM
870-1984-03
4 GB MEM870-1984-05
870-1984-06
870-1984-07
870-1984-13^
870-1984-16^
ipsbpdcm
ips1 IPservice
2 (useonlyA)
1ipsm
870-2371-02
870-2371-06
870-2371-08DSM-1G
870-2371-13^
mcp
bpdcm
bpdcm21 IPservice
2 (useonlyA)
1mcpm
870-2372-03
870-2372-07
870-2372-09EDSM-2G*
mcp870-2372-14^
870-2372-15^
59910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Name asshown on card
label
ss7ansiss7ml821
lime1
limt1
870-2198-01
870-2198-02
E1/T1 MIM††ccs7itubpmplt
limch
870-2198-03
870-2198-04
870-2198-07^
atmitu
atmitu
bphcap121lime1atm
870-2455-01
870-2455-02E1-ATM
bphcapt870-2455-03
870-2455-05^
atmansiatmhc34 (3used)
1limatm
lime1atm
870-1872-01^
870-1872-02^
E5-ATM
atmitublixp
ss7ansi
ss7hc
3281lime1
limt1870-1873-02
870-1873-03^
870-1873-04^
E5-E1T1
ccs7itu
blixp ccs7itu181lime1 (forSE-HSL)
ss7ansi181limt1 (forST-HSL-A)
iplimiplhc1621
dcm870-2212-02
870-2212-03^E5-ENET
iplimiblixp
870-2212-04^
ss7ipgwipghc121
870-2212-05^
ipgwiblixp
stplanslanhc2 IPService
21
blixp
erouteerthc2 IPService
21stc
blixp
ipsgipsg3221enet
60910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Name asshown on card
label
blixp
ipsipshc1 ipshcservice
2 (useonlyA)
1
ipsm870-2877-01^
870-2877-02^
E5-IPSM
blixp
oamoamhcN/A22N/A870-2903-01^E5-MASP
blmcap870-2903-02^
870-2903-03^
N/AN/AN/AN/A2N/A870-2900-01^E5-MDAL
vsccpsccphc2 IPService
22dsm870-2860-01^
870-2860-02^
E5-SM4G
blixp
glsglshcN/A11tsm870-2943-03^E5-TSM
blixp
oam
eoam
bpdcmN/AN/A1N/A
870-2360-01
870-2360-05
GPSM-II
bpdcm2
870-2360-06
870-2360-08^
870-2360-09^
ss7ansi
ss7hc6482
lime1
limt1870-2671-01
870-2671-02
870-2671-03^
HC-MIM††ccs7itu
blixpccs7itu282lime1 (for
SE-HSL)
hiprhiprN/AN/A1N/A870-2574-01
870-2574-02^HIPR
hipr2hipr2N/AN/A1N/A870-2872-01^HIPR2
870-2872-02^
61910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Name asshown on card
label
bphmuxbphmuxN/AN/A1N/A870-1965-01
870-1965-03^HMUX
atmansi
atmansi
bphcap121limatm
870-1293-02
870-1293-03
LIM-ATM
bphcapt
870-1293-06
870-1293-07
870-1293-08
870-1293-10
870-1293-13^
N/AN/AN/AN/A2N/A
870-0773-04
870-0773-05
MDAL870-0773-06
870-0773-08
870-0773-09^
870-0773-10^
ss7ansibpmpl
ss7ml821limds0
870-2061-01
870-2061-03
870-2061-04MPL
870-2061-06^
N/AN/AN/AN/A1N/A870-0774-10
870-0774-11TDM
N/AN/AN/AN/A1N/A870-0774-15TDM-GTI
870-0774-18^
glsgls
imtN/AN/A1tsm
870-1289-02
870-1289-03
870-1289-04TSM-256
870-1289-06^
62910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Name asshown on card
label
870-1289-07^
glsgls
imtN/AN/A1tsm
870-1290-02
870-1290-03
870-1290-04
TSM-512
glsgls
imtN/AN/A1tsm
870-1291-02
870-1291-03
870-1291-04
TSM-768
glsgls
imtN/AN/A1tsm
870-1292-02
870-1292-03
870-1292-04
TSM-1024
*Although the system allows 250 MCPM cards, practical usage is 2.
†DSM or E5-SM4G cards are required for the LNP, 50,000 GTT, or EPAP-related features. For moreinformation about turning these features on, refer to the appropriate manual.
††For the E1 or T1 interface, an SS7 application (SS7ANSI or CCS7ITU) can be assigned to these cards.
For more information on the E1 or T1 interface go to Chapter 3 “System Administration Procedures”in the Database Administration Manual - SS7.
^This part number is the ROHS equivalent of the immediately preceding part number.
Hardware Baseline
The Hardware Baseline is shown in the following table.
Table 18: Hardware Baseline
Required forROHS Number (ifapplicable)
Part NumberComponent
HMUX870-2321-08 Rev A870-2321-02 Rev AControl Shelf
HMUX, Standard Frame870-2321-04 Rev A
HMUX, Heavy DutyFrame
870-2377-02 Rev A870-2377-01 Rev A
63910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
870-0775-03 Rev EControl Shelf Backplane
Heavy Duty Frame870-2378-02 Rev A870-2378-01 Rev AExtension Shelf
Standard Frame870-0776-02 Rev C
870-0776-03 Rev D
870-0776-06 Rev A
870-0776-07 Rev A
870-0776-08 Rev A or
870-0776-11 Rev A
Shelves with FanAssembly
870-1824-02 Rev A870-1824-01 Rev AAir Management Card
870-1945-01 Rev A orDCM
870-1945-02 Rev A or
870-1945-03 Rev A
870-1984-01 Rev ADCMX
870-2372-01 Rev E orEDCM (single slot)
870-2372-13 Rev A870-2372-08 Rev A
870-2508-02 Rev A870-2508-01 Rev AEDCM-A (single slot)
870-1984-02 Rev A orDSM, 1GB MEM
870-1984-08 Rev A or
870-1984-15 Rev A870-1984-09 Rev A
870-1984-17 Rev A
870-1984-03 Rev ADSM, 2GB MEM
Heavy Duty Frame870-1984-05 Rev ADSM, 4GB MEM
870-1984-06 Rev A or
870-1984-13 Rev A870-1984-07 Rev A
870-1984-16 Rev A
870-2371-02 Rev ADSM-1G
870-2371-06 Rev A
870-2371-13 Rev A870-2371-08 Rev A or
870-2372-03 Rev AEDSM-2G (MCPM)
64910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
870-2372-07 Rev A
870-2372-14 Rev A870-2372-09 Rev A or
870-2372-15 Rev A
870-2198-01 Rev G orE1/T1 MIM
870-2198-02 Rev A or
870-2198-03 Rev A or
870-2198-07 Rev A870-2198-04 Rev A
870-2455-01 Rev BE1-ATM
870-2455-02 Rev B
87-02455-05 Rev A870-2455-03 Rev A
870-1872-01 Rev AE5-ATM
870-1872-02 Rev A
830-1342-05E5-ATM Adapter
870-1873-03 Rev A870-1873-02 Rev AE5-E1T1
870-1873-04 Rev A
870-2212-03 Rev A870-2212-02 Rev AE5-ENET
870-2212-04 Rev A
870-2212-05 Rev A
870-2877-01 Rev AE5-IPSM
870-2877-02 Rev A
870-2903-01 Rev CE5-MASP
870-2903-02 Rev A
870-2903-03 Rev A
870-2900-01 Rev AE5-MDAL
870-2860-01 Rev FE5-SM4G
870-2860-02 Rev A
870-2943-03 Rev AE5-TSM
Standard frame orstandard frame withHC-MIMs
870-1606-01 Rev A orFAP
870-1606-05 Rev A870-1606-02 Rev A
65910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
Heavy duty frame orheavy duty frame withHC-MIMs
870-2320-03 Rev A870-2320-01 Rev A
870-2804-01 Rev B870-1823-01 Rev B
870-0243-08 Rev CFAP-CF/EF
870-0243-09 Rev CFAP-MISC
870-2804-01 Rev AFAP Fuse and AlarmPanel
830-1343-01 Rev AFast Copy AdapterUpper
830-1343-02 Rev AFast Copy AdapterLower
870-2360-01 Rev EGPSM-II
870-2360-05 Rev A
870-2360-08 Rev A870-2360-06 Rev A
870-2360-09 Rev A
870-2671-01 Rev P orHC-MIM
870-2671-03 Rev A870-2671-02 Rev B
870-2574-02 Rev A870-2574-01 Rev DHIPR
870-2872-01 Rev AHIPR2
870-2872-02 Rev A
830-1344-xxHigh-speed FiberChannel Cable
870-1965-03 Rev A870-1965-01 Rev AHMUX
870-1293-02 Rev A orLIM-ATM
870-1293-03 Rev A or
870-1293-06 Rev A or
870-1293-07 Rev A or
870-1293-08 Rev B or
870-1293-13 Rev A870-1293-10 Rev A or
870-0773-04 Rev B orMDAL
870-0773-05 Rev A or
870-0773-06 Rev A or
66910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
870-0773-09 Rev A870-0773-08 Rev A
870-0773-10 Rev A
870-2061-01 Rev A orMPL
870-2061-03 Rev A or
870-2061-06 Rev A870-2061-04 Rev A
890-1843-02 Rev A890-1843-01 Rev CMPS DC FrameAssembly
890-1801-02 Rev A890-1801-01 Rev EMPS in Heavy DutyFrame
870-0774-10 Rev A orTDM
Rev C required ifinstalled in a system870-0774-11 Rev A
with more than 11shelves
870-0774-18 Rev A870-0774-15 Rev BTDM GTI
870-1289-02 Rev A orTSM-256
870-1289-03 Rev A or
870-1289-06 Rev A870-1289-04 Rev A
870-1289-07 Rev A
870-1290-02 Rev A orTSM-512
870-1290-03 Rev A or
870-1290-04 Rev A
870-1291-02 Rev A orTSM-768
870-1291-03 Rev A or
870-1291-04 Rev A
870-1292-02 Rev A orTSM-1024
870-1292-03 Rev A or
870-1292-04 Rev A
890-1037-06 Rev A890-1037-01 Rev AKit E1
890-1013-01 Rev AKit, Holdover ClockAssy
890-1038-01 Rev DFan Assy (StandardFrame)
67910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
890-0001-01 Rev A orFan Assy (Shelves withHC-MIM cards)
890-0001-04 Rev A890-0001-02 Rev A
870-2640-03 Rev A870-2640-01 Rev FT1000 ApplicationServer
T1000 ApplicationServer
870-2706-04 Rev A870-2706-02 Rev BDual Port G-Bit E-NetCard
T1000 ApplicationServer
870-2707-02 Rev A870-2707-01 Rev BModem Card
T1000 ApplicationServer
870-2708-02 Rev A870-2708-01 Rev BQuad Serial Exp. Card
T1000 ApplicationServer
870-2721-04 Rev A870-2721-02 Rev B120 GB Hard DriveAssy
870-1893-03 Rev A870-2754-01 Rev P orT1100 (ApplicationServer - DC)
870-2807-01 Rev A
T1100 (ApplicationServer - DC)
870-2706-04 Rev A870-2706-02 Rev ADual Port Ethernet
T1100 (ApplicationServer - DC)
870-2787-02 Rev A870-2787-01 Rev BHard Disc Drive - 250GB SATA
T1100 (ApplicationServer - DC)
870-2833-02 Rev A870-2833-01 Rev C2 GB RAM Kit
68910-6006-001 Revision E, August 2012
EAGLE 5 ISS Release 43.0Release 43.0 Feature Notice
GlossaryA
Asynchronous Transfer ModeATM
A packet-oriented transfer mode thatuses an asynchronous time divisionmultiplexing technique to multiplexinformation flow in fixed blocks,called cells.
A high-bandwidth, low-delayswitching, and multiplexingtechnology to support applicationsthat include high-speed data, localarea network interconnection,multimedia application and imaging,and residential applications such asvideo telephony and otherinformation-based services.
C
The application for the ITU SS7signaling links that is used with card
CCS7ITU
types limds0, limch, lime1,and limt1.
Carrier Identification CodeCIC
A 4-digit code that controls therouting applied to a message.
D
Database Communication ModuleDCM
The DCM provides IP connectivityfor applications. Connection to ahost is achieved through an ethernetLAN using the TCP/IP protocol.
Database Service Module.DSM
The DSM provides large capacitySCCP/database functionality. TheDSM is an application card thatsupports network specific functions
69910-6006-001 Revision E, August 2012
D
such as EAGLE ProvisioningApplication Processor (EPAP),Global System for MobileCommunications (GSM), EAGLELocal Number Portability (ELAP),and interface to Local ServiceManagement System (LSMS).
E
The European equivalent of T1 thattransmits digital data over atelephone network at 2.048 Mbps.
E1
EPM-based E1/T1 Multi-ChannelInterface Module
E5-E1T1
An EPM-based card that providesE1 and T1 connectivity. The E5indicates the card is for existingEAGLE 5 control and extensionshelves. E1T1 is an abbreviation forthe ITU E1 and ANSI T1 interfaces.Thus the nomenclature defines theshelves where the card can be usedand the physical interface that itprovides.
EPM-based Ethernet cardE5-ENET
A high capacity single-slot IPsignaling card (EPM card plus GigEthernet PMC cards).
Enhanced Database CommunicationModule
EDCM
Emulated Point CodeEPC
G
Gigabyte — 1,073,741,824 bytesGB
H
70910-6006-001 Revision E, August 2012
GlossaryRelease 43.0 Feature Notice
H
High Capacity Multi-ChannelInterface Module
HC-MIM
A card that provides access to eightE1/T1 ports residing on backplaneconnectors A and B. Each datastream consists of 24 T1 or 31 E1 DS0signaling links assigned in atime-division multiplex (TDM)manner. Each channel occupies aunique timeslot in the data streamand can be selected as a localsignaling link on the interface card.Each card has 8 E1 or 8 T1 portinterfaces with a maximum of 64signaling links provisioned amongthe 8 E1/T1 ports.
High-Speed IMT Packet RouterHIPR
A card that provides increasedsystem throughput and trafficcapacity. HIPR moves EAGLE froman intra-shelf ring topology to anintra-shelf switch topology. HIPRacts as a gateway between theintra-shelf IMT BUS, running at125Mbps, and the inter-shelfoperating at 1.0625Gbps. The HIPRcard will seat in the same slot as anHMUX card (slots xx09 & xx10 ofeach shelf).
High-Speed IMT Packet Router 2HIPR2
A card that provides increasedsystem throughput and trafficcapacity on the existingFibre-Channel ring. A high rateFibre-Channel option of 2.5 Gbps isavailable when an EAGLE isprovisioned with all HIPR2 cards.In a mixed topology where a HIPR2is used in an EAGLE along withHMUX and HIPR, the Fibre-Channelring runs at the lower rate of 1.0625Gbps.
71910-6006-001 Revision E, August 2012
GlossaryRelease 43.0 Feature Notice
H
High-Speed MultiplexerHMUX
A card that supports therequirements for up to 1500 links,allowing communication on IMTbuses between cards, shelves andframes. HMUX cards interface to 16serial links, creating a ring from aseries of point to point links. EachHMUX card provides a bypassmultiplexer to maintain the ring’sintegrity as cards are removed andinserted into an operational shelf.
High-Speed IMT Multiplexer, areplacement card for the IPMX.
I
Integrated Signaling SystemISS
L
A link interface module (LIM) withthe ATM interface.
LIM-ATM
Local Number PortabilityLNP
M
Maintenance Disk and AlarmMDAL
Multi-Channel Interface ModuleMIM
Multi-port LIMMPL
O
Originating Point CodeOPC
P
Point Code and CIC TranslationPCT
A feature that enables the EAGLE 5ISS to translate the DPC or OPC ofan MTP routed message, and enablesmodification of the CIC of an ISUP
72910-6006-001 Revision E, August 2012
GlossaryRelease 43.0 Feature Notice
P
message. This gives the EAGLE 5 ISSthe capability to emulate a pointcode using other nodes in itsnetwork.
S
Synchronous E1 High Speed LinkSE-HSL
Format for E1 high-speed signalinglinks where time-slot 0 is used forframing and error control. Theremainder of bandwidth, equivalentto 31 channels of 64Kbps data, isused as a single data link yielding atotal capacity of 1.984 Mbps. Alsoknown as Unchannelized E1.
Signaling System #7SS7
SS7 ANSISS7ANSI
An application used by the LIMcards and the E1/T1 MIM card forthe MTP functionality.
Single Slot Enhanced DataCommunications Module
SSEDCM
Subsystem Prohibited networkmanagement message.
SSP
Subsystem Prohibited SCCP (SCMG)management message. (CER)
T
Transmission Level 1T1
A T1 interface terminates ordistributes T1 facility signals for thepurpose of processing the SS7signaling links carried by the E1carrier.
A leased-line connection capable ofcarrying data at 1,544,000bits-per-second.
73910-6006-001 Revision E, August 2012
GlossaryRelease 43.0 Feature Notice
T
Terminal Disk ModuleTDM
Time Division Multiplexing
TDM Global Timing InterfaceTDM-GTI
Translation Services ModuleTSM
Provides translation capability andGlobal Title Translation (GTT)implementation for the LocalNumber Portability (LNP) functionand is used for downloadinggateway screening tables to linkinterface modules (LIMs).
74910-6006-001 Revision E, August 2012
GlossaryRelease 43.0 Feature Notice
Recommended