testing to perfection MWD Manual Test Stand - dqplus.com · MWD tension and compression bench-top...

MWD

�� tteennssiioonn aanndd ccoommpprreessssiioonn

�� bbeenncchh--ttoopp

�� aaffffoorrddaabbllee

�� eexxcceelllleenntt ppoossiittiioonnaall ccoonnttrrooll

�� eeaassyy--ttoo--uussee

The MWD is an easy-to-use, handwheel-operated twin-columntest stand, with a maximum capacity of 10kN (2200lbf).Operation is via a handwheel, giving excellent positional controlof the crosshead for applications which require a load reading tobe taken at an exact displacement. Combined with a Mecmesinloadcell and display or a digital force gauge, the MWD is a low-cost solution to a variety of higher-rated tension andcompression testing applications.

Unlike other 10kN test stands, the MWD occupies minimal benchspace and due to it’s simple, compact design it can be used as aportable unit for off-site testing.

• 150mm (6”) crosshead travel• Choose a mounting plate to suit a Mecmesin force gauge

or a mounting block to fit a loadcell• Choose an AFTI display and mounting bracket when used

with a loadcell• Choose a 150mm x 0.01mm resolution height scale for

load/displacement applications

low-costeasy-to-use

versatile

Top-load Testing

Digital HeightScale

Tensile Testing

t e s t i n g t o p e r f e c t i o n

Manual Test Stand

Specifications

431-

003-

01

Dimensions mm (inch)

Mecmesin reserves the right to alter equipment specifications without prior notice.

Optional loadcellmounting block

HHeeaadd OOffffiicceeMMeeccmmeessiinn LLiimmiitteeddNNeewwttoonn HHoouussee,, SSpprriinngg

CCooppssee BBuussiinneessss PPaarrkk,,

SSlliinnffoolldd,, WWeesstt SSuusssseexx,,

RRHH1133 00SSZZ,, UUKK

ee:: ssaalleess@mmeeccmmeessiinn..ccoomm

tt:: ++4444 ((00)) 11440033 779999997799

ff:: ++4444 ((00)) 11440033 779999997755

NNoorrtthh AAmmeerriiccaaMMeeccmmeessiinn CCoorrppoorraattiioonn

4455992211 MMaarriieess RRooaadd,,

SSuuiittee 112200,, SStteerrlliinngg

VViirrggiinniiaa 2200116666,,

UU..SS..AA..

ee:: iinnffoo@mmeeccmmeessiinnccoorrpp..ccoomm

tt:: ++11 770033 443333 99224477

ff:: ++11 770033 444444 99886600

AAssiiaaMMeeccmmeessiinn AAssiiaa CCoo.. LLttdd9911//11 CChhaaiiyyoo BBuuiillddiinngg,, 1111tthh FFlloooorr,,

RRoooomm 11110033,, RRaammaa 99 RRooaadd,, HHuuaayykkwwaanngg,,

BBaannggkkookk,, 1100331100,,

TThhaaiillaanndd

ee:: ssaalleess@mmeeccmmeessiinnaassiiaa..ccoomm

tt:: ++6666 22 224477 4466 8811

ff:: ++6666 22 224477 4466 8822

CChhiinnaaMMeeccmmeessiinn ((SShhaanngghhaaii)) PPttee LLttdd

UUnniitt 1188DD,, SSiiCChhuuaanngg BBuuiillddiinngg NNoo33,,

NNoo 660000,, TTiiaann SShhaann RRooaadd,,

CChhaannggnniinngg DDiissttrriicctt,, SShhaanngghhaaii,,

PPeeooppllee’ss RReeppuubblliicc ooff CChhiinnaa

ee:: ssaalleess@mmeeccmmeessiinn--cchhiinnaa..ccoomm

tt:: ++8866 2211 66223333 33445599

ff:: ++8866 2211 66223333 33447799

MWD

Crosshead travel (both directions) 0.5mm per handle revolution

Maximum crosshead travel 150mm (6”)

Maximum load 10kN/1000kgf/2200lbf

Maxium daylight 580mm (22.8”) with loadcell mounting block or 530mm(20.9”) with force gauge crosshead and gauge fitted

Loadcell ranges 10kN (1000kgf, 2200lbf) or 5kN (500kgf, 1100lbf)

Weight 20kg (44lbs)

Available options

Digital height scale 0.01mm resolution

Horizontal operation Yes

Extended crosshead travel Yes (but reduced load rating)

Extended columns Yes

DISTRIBUTOR STAMP

t e s t i n g t o p e r f e c t i o n

Optional AFTImounting bracket

930mm

250mm

200mm

75mm

‘A’ 580mm‘B’ 530mm

Stand with force gauge crosshead

‘A’ 580mm with loadcell mounting block excluding loadcell‘B’ 530mm with force gauge crosshead and gauge fitted

225mm

390mm 102mm

M10thread