View
1
Download
0
Category
Preview:
Citation preview
42
CHRYSLER
GENERAL NOTES FROM TECHNICAL SERVICES DEPARTMENTChrysler (AMC / Jeep) torque converters are basically arranged according to the table of contents.
Import applications used in chrysler vehicles are toward the end of the section.
The following criteria should be used to determine the proper converter:
In 1998 Chrysler changed the bolt pattern from an offset bolt pattern to a 90 degree (even) bolt pattern for A604,A606 transmissions. The offset bolt pattern may be distinguished from the 90 degree bolt pattern by examiningthe mounting pad. A tapered pad denotes offset, a half-moon shaped pad denotes the 90 degree bolt pattern.NOTE: Offset bolt patterns have an "O" shaped ID mark stamped next to one of the mounting pads.
FWD - A404 / A670 ( 3 speed ), A604 / A606 ( 4 speed )
- Diameter: 10" / 10 3/4"- Non lockup / Lockup- Stall speed: High / Low
- Impeller design: Deep / Shallow & Smooth / Ribbed- Hub design: Slots / Flats- Mounting pads: 3 / 4 Offset / 90 degrees- Turbine splines: 22 / 23 / 24
In 1996 Chrysler changed the bolt pattern from an offset bolt pattern to a 90 degree (even) bolt pattern for allA500 & A518 transmissions. The picture shows the location of the codes for this type of mount.NOTE: Jeep changed to the 90 degree bolt pattern starting in 1994.
SMALL HUB:- Flywheel teeth: 122/130/148/ without (AMC / Jeep)- Diameter: 11"- Non lockup/Lockup- Stall speed: High / Low- Hub design: Slots/Flats- Mounting Pads: Thick / Thin Offset / 90 degrees- Pilot Diameter: 1.550"/1.810"- Weight Style: Square / Butterfly / None- Damper springs: Light / Medium / Heavy
- Turbine spline: 27 non lockup / 26 lockup
LARGE HUB:- Flywheel teeth: 130 / without (AMC / Jeep)- Diameter: 11"(wide ring gear), 12" (narrow ring gear), 13" (cummins w/o ring gear)- Non lockup / Lockup- Stall speed: High / Low- Mounting Pads: Thick / Thin Offset / 90 degrees Bolt size- Weight Style: Square / Butterfly / None- Damper springs: Light / Medium / Heavy- Turbine spline: 19 / 24 non lockup / 23 lockup
RWD - TF-6/A500/42RE ( small hub ), TF-8/A518, A618/46RE, 47RE ( large hub )
NOTE: Insure that the proper flexplate bolt length is used or cover/piston damage will occur.
Offset 90 Styleo
43
CHRYSLER
CH
RY
SLE
R
DESCRIPTION OF CONVERTERS WITH WEIGHTS - Pre 1977
12"
11"
Part # - 839weights:width .75length 1.20thick .158
Part # - 282weights:width .75length 1.40thick .25
Part # - 499weights:width .75length 1.62thick .38
Part # - 641weights:width .62length .88thick .177
Part # - 918weights:width .75length 1.62thick .38
Part # - 145weights:width .75length 1.40thick .25
DESCRIPTION OF CONVERTERS WITH WEIGHTS - 1977-1992
3.485
92-Up Square
.460
1.175 .750
3.485
1.545
13 to 1 in./oz.
(100 gram)
20 to 1 in./oz.
(120 gram)
44
CHRYSLER
AMC/JEEP
NON LOCKUP LOCKUP
PART# WEST STALL PART# WEST STALLCOAST # COAST #
11" R-21 848 HS NLA R-25 HSR-22 501 LS NLA R-27 LS
R-28 423 LS NLA R-29 HS
R-30 686 HS
TF- 6NON LOCKUP LOCKUP
PART# WEST STALL PART# WEST STALLCOAST # COAST #
HUB W/SLOTS R-18 R-13 R-26 178 HSR-23 498 HS R-31 177 LSR-24 496 LS R-32 AMC-2 HSR-33 AMC-1 LS R-32LS LS
HUB W/FLATS 584 979
PADS 90 DEG. 584-90 979B HS
NON LOCKUP LOCKUPPART# WEST STALL PART# WEST STALL
COAST # COAST #
HUB W/SLOTS 749 746 HS
HUB W/FLATS 877 877 HS 584 979703 703 HS853 853 HS
PADS 90 DEG. 584-90 979B783 783 HS792 792 HS
A500
NON LOCKUP LOCKUPPART# WEST STALL PART# WEST STALL
COAST # COAST #
12" R-17 R-14
11" R-21 848 HS NLA R-25 HSR-22 501 LS NLA R-27 LS
R-28 423 LS NLA R-29 HS
R-30 686 HS
TF-8
A518
QUICK REFERENCE
(NOTE: See specific converter section to verify correct application)
45
CHRYSLER
CH
RY
SLE
R
QUICK REFERENCE
NON LOCKUP LOCKUP
PART# WEST STALL PART# WEST STALLCOAST # COAST #
HUB W/SLOTS 168 168 563 290 HS333 212 564 488 LS384 694 HS 565 286 LS385 385 LS 567 725 HS388 880 LS 568 627 HS398 787 HS403 403762 762579 829 IMPORT580 101 IMPORTCT2 138A/B IMPORTCT3 445 IMPORTCT4 836 IMPORT
HUB W/FLATS 584 979 IMPORT
PADS 90 DEG. 584-90 979B IMPORT
CHRYSLER
TF- 6
NON LOCKUP LOCKUP
PART# WEST STALL PART# WEST STALLCOAST # COAST #
HUB W/SLOTS 384 694 HS 563 290 HS385 385 LS 564 488 LS388 880 LS 565 286 LS398 787 HS 567 725 HS831 HS 568 627 HS
HUB W/FLATS 873 873 HS 584 979 IMPORT853 853 HS
NLA 871 871 HSNLA 899 899 HS
PADS 90 DEG. 584-90 979B IMPORT781 781 HS792 792 HS
A500
(NOTE: See specific converter section to verify correct application)
46
CHRYSLER
CHRYSLER
NON LOCKUP LOCKUP
PART# WEST STALL PART# WEST STALLCOAST # COAST #
12" 090 090359 359839 839282 282499 499
11" 145 145387 492 HS389 580 LS 559 886 LS390 490 HS 561 850 LS400 692 HS 562 405 HS524 494 LS 566 432 LS526 506 LS 566HS 410 HS641 641 569 162 HS764 764766918 918
TF- 8
NON LOCKUP LOCKUP
PART# WEST STALL PART# WEST STALLCOAST # COAST #
11" 125 HS 559 886 LS387 492 HS 561 850 LS389 580 LS 562 405 HS390 490 HS 566 432 LS400 692 HS 566HS 410 HS518 125 LS 569 162 HS520 520 LS 642 642 HS524 494 LS 878 878 HS526 506 LS862 HS
PADS 90 DEG. 546 546 HS 785 785 HS
TF-8 & A518
W/O GEAR 590 654 591 656590HS HS 592 655
A518
QUICK REFERENCE
(NOTE: See specific converter section to verify correct application)
47
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
AMC/JEEP
TF-6
11" 1.810" 1.498" 4 27 R-18 Slot Thick Pads
Code:1972-77; 6 cyl. 232, 258, 304 R13Low stall, non lockup.
11" 1.810" 1.498" 4 27 R-24Slot Thin Pads
Code:1978-84; Interchanges with R-18 (R13) 496Low stall, non lockup.
11" 1.810" 1.498" 4 27 R-23Slot Thin Pads
Code:1978-84; 498High stall, non lockup.
11" .825" 1.498" 4 27 R-33Slot Pads
Code: German Design by Fitchel & Sachs1982-on; Jeep AMC-1non lockup.
11" 1.810" 1.498" 4 26 R-26Slot Pads
Code:1978-on; High stall. 178lockup.
11" 1.810" 1.498" 4 26 R-31Slot Pads
Code:1978-on; Low stall. 177lockup.
11" .825" 1.498" 4 26 R-32Slot Pads
Code: German Design by Fitchel & Sachs1982-on; Jeep, 4 cyl., High Stall. AMC-2lockup.
AMC/Jeep TF-6 (continued next page)...
48
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
AMC/JEEP
TF-6 (continued)
A500
11" .825" 1.498" 4 26 R-32LSSlot Pads
Code: German Design by Fitchel & SachsLockup, 1982-on; Jeep, 6 cyl., Low Stall. NA
10" 1.335" 1.498" 4 22 584Mill Flat Pads
Code:1994-Up; Jeep 2.5L 979Offset bolt pattern
10" 1.335" 1.498" 4 22 584-90Mill Flat Pads
Code:1996-Up; Jeep 2.5L 979B90 bolt pattern
11" 1.810" 1.498" 4 27 749Slot Pads
Code: 746, 7491992; 4.0L Wrangler 746Non-lockup
11" 1.810" 1.498" 4 27 877Mill Flat Pads
Code: 8771993; 4.0L 877Non-lockup
11" 1.810" 1.498" 4 26 703Mill Flat Pads
Code: 7031994-on; 4.0L, No ring gear 703Lockup
o
49
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
AMC/JEEP
11" 1.810" 1.498" 4 26 853Mill Flat Pads
Code: 8711993-95; 3.9L, with ring gear 853Lockup
11" 1.810" 1.498" 4 26 783Mill Flat Pads
Code: 7831996-Up; 4.0L 783Lockup; 90obolt pattern w/ no ring gear.
11" 1.810" 1.498" 4 26 792Mill Flat Pads
Code: 792, 5991996-Up; 5.2L, 792Lockup; 90obolt pattern wide ring gear.
10" 1.335" 1.498" 4 22 584Mill Flat Pads
Code: 146D50 Pickup, hub length - 2.200" 979Lockup, Offset bolt pattern.
10" 1.335" 1.498" 4 22 584-90Mill Flat Pads
Code: 146D50 Pickup, hub length - 2.200" 979BLockup, 90obolt pattern.
A500 (continued)
50
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
AMC/JEEP
TF-8
12" 1.810" 1.876" 4 24 R-17Slot Pads
Code:1972-77; All engines. R14Non lockup
11" 1.810" 1.876" 4 24 R-22Slot Pads
Code:1978-Up; 501Non lockup, Low Stall.
11" 1.810" 1.876" 4 24 R-21Slot Pads
Code:1978-Up; 848Non lockup, High Stall.
11" 1.810" 1.876" 4 23 R-28Slot Pads
Code:1978-Up; Red decal (use for white/blue) 423Lockup, Low Stall.
11" 1.810" 1.876" 4 23 R-30Slot Pads
Code:1978-Up; Red decal (use for white/blue) 686Lockup, High Stall.
51
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
AMC/JEEP
11" 1.810" 1.876" 4 24 R-22Slot Pads
Code:1990-Up; 501Non lockup, Low Stall
11" 1.810" 1.876" 4 24 R-21Slot Pads
Code:1990-Up; 848Non lockup, High Stall.
11" 1.810" 1.876" 4 23 R-28Slot Pads
Code:1990-Up; Red decal (use for white/blue) 423Lockup, Low Stall
11" 1.810" 1.876" 4 23 R-30Slot Pads
Code:1990-Up; Red decal (use for white/blue) 686Lockup, High Stall.
A518
52
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
A404, A413, A470 (non lockup)
10" 1.335" 1.498" 3 23 578Slot Pads
Code: 058, 466, 597, 8731979-85; 2.2L, 2.6L non turbo engines 597Low stall
10" 1.335" 1.498" 3 23 578HSSlot Pads
Code: 068, 9701979-85; 2.2L Turbo 578High stall
10" 1.335" 1.498" 4 23 581Mill Flat Pads
Code: 143, 161, 9741986-on; 2.2L, 2.6L non turbo engines 861Low stall
10" 1.335" 1.498" 4 23 581HSMill Flat Pads
Code: 072, 339, 369, 432, 967, 9721986-on; 2.2L turbo, 2.5L 863High stall
10" 1.335" 1.498" 4 22 582Mill Flat Pads
Code: Various1987-92; 2.2L, 2.5L, 3.0LMeasures aprx .650" from top of hub to top of housing 974(Deep Impeller)
10" 1.335" 1.498" 4 22 582YMill Flat Pads
Code: Various1993-97; 2.2L, 2.5L, 3.0LMeasures aprx .950" from top of hub to top of housing. 974A(Shallow Impeller), Offset bolt pattern. 975/A
A670 (lockup)
53
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
A670 (lockup) continued
A604 (40TE, 41AE/TE)
10" 1.335" 1.498" 4 22 582Y-90Mill Flat Pads
Code: Various1998-Up; 2.2L, 2.5L, 3.0LMeasures aprx .950" from top of hub to top of housing. NA(Shallow Impeller), 90o bolt pattern.
10" 1.335" 1.498" 4 24 583Mill Flat Pads
Code: 039, 040, 581, 5951989-90; All except Eagle Premier 977
10" 1.335" 1.498" 4 22 582YMill Flat Pads
Code: Various1991-97; 2.0L, 2.4L, 2.5L, 3.0LMeasures aprx .950" from top of hub to top of housing. 974A(Shallow Impeller), Offset bolt pattern. 975/A
10" 1.335" 1.498" 4 22 582Y-90Mill Flat Pads
Code: Various1998-Up; 2.2L, 2.5L, 3.0LMeasures aprx .950" from top of hub to top of housing. NA(Shallow Impeller) 90o bolt pattern.
10.75" 1.335" 1.498" 4 22 585Mill Flat Pads
Code: 076, 311, 375, 476, 518, 7751991-97; 3.3L, 3.8L & 1990 Eagle Premier 980Offset bolt pattern.
10.75" 1.335" 1.498" 4 22 585-90Mill Flat Pads
Code: Various1998-UP; 3.3L, 3.8L (Smooth/Dimpled impeller) 981/A90o bolt patttern.
54
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
A606
10.75" 1.335" 1.498" 4 22 586Mill Flat Pads
Code: 799, 8031993-97; 3.3L, 3.5L; 3.312" hub length 803Offset bolt pattern.
10.75" 1.335" 1.498" 4 22 586-90Mill Flat Pads
Code: Various1998-Up; 3.3L, 3.5L 804/A90o bolt pattern.
11" 1.550" 1.498" 4 18 333Slot Pads
Code:1960-61; All engines 212148 tooth ring gear
11" 1.550" 1.498" 4 18 403Slot Pads
Code:1962-67; All engines 403122 tooth ring gear
11" 1.810" 1.498" 4 27 762Slot Pads
Code:1968-76; All engines; 1975-77 225, 318ci 762122 tooth ring gear
11" 1.810" 1.498" 4 27 168Slot Pads
Code:1976-77; 360ci engine 168122 tooth ring gear; two 60 gram weights
TF-6 (A904) non lockup
PHOTO NOTAVAILABLE
55
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
11" 1.810" 1.498" 4 27 385Slot Pads
Code:1978-Up; 225, 318ci engines 385122 tooth ring gear, Low stall.
11" 1.810" 1.498" 4 27 384Slot Pads
Code:1978-Up; 318ci engine 694122 tooth ring gear, High stall.
11" 1.810" 1.498" 4 27 388Slot Pads
Code:1978-on; 360ci engine 880122 tooth ring gear; one 120 gram tri-weight, Low stall.
11" 1.810" 1.498" 4 27 398Slot Pads
Code:1978-on; 360ci engine 787122 tooth ring gear; one 120 gram tri-weight, High stall.
TF-6 (A904) non lockup (continued)
56
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
TF-6 (A904) lockup
11" 1.810" 1.498" 4 26 563Slot Pads
Code: Blue decal1978-on; 225, 318ci 290High stall.
11" 1.810" 1.498" 4 26 564Slot Pads
Code: White decal1978-on; 225, 318ci 488Low stall.
11" 1.810" 1.498" 4 26 568Slot Pads
Code: White decal1978-on; 225, 318ci 627High stall.
11" 1.810" 1.498" 4 26 565Slot Pads
Code: Red decal1978-on; 360ci 286120 gram tri-weight, Low stall.
11" 1.810" 1.498" 4 26 567Slot Pads
Code: Red decal1978-on; 360ci 725120 gram tri-weight, High stall.
10" 1.335" 1.498" 4 22 584Mill Flat Pads
Code: 146D50 Pickup 979hub length measures 2.200"Offset bolt pattern.
10" 1.335" 1.498" 4 22 584-90Mill Flat Pads
Code: 1461996-Up, D50 Pickup 979Bhub length measures 2.200"90o bolt pattern.
57
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
TF-6 (A904) Import
10" .750" 1.498" 3 27 CT-2Slot Pads
Code:1974-Up; 1.6L Arrow, Colt 138A/B
10" .750" 1.498" 3 27 CT-3Slot Pads
Code:1978; 2.6L Colt 445Inertia ring on front cover
10" 1.335" 1.498" 3 23 CT-4Slot Pads
Code: 131, 534, 862, 936 8361978-on; 2.5L & Post office vehicles, 2.200" hub.
10" 1.335" 1.498" 3 23 579Slot Pads
Code:1978-79; 2.0L, 2.6L 829Inertia ring on front cover
10" 1.079" 1.498" 3 27 580Slot Pads
Code:1979-80; 1600 Colt 101
PHOTO NOTAVAILABLE
58
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
A500 (non lockup)
11" 1.810" 1.498" 4 27 385Slot Pads
Code:1988-Up; 225, 318ci engines 385122 tooth ring gear, Low stall.
11" 1.810" 1.498" 4 27 384Slot Pads
Code:1988-Up; 318ci engine 694122 tooth ring gear, High stall.
11" 1.810" 1.498" 4 27 388Slot Pads
Code:1988-Up; 360ci engine 880122 tooth ring gear; one 120 gram tri-weight, Low stall.
11" 1.810" 1.498" 4 27 398Slot Pads
Code:1988-Up; 360ci engine 787122 tooth ring gear; one 120 gram tri-weight, High stall.
11" 1.810" 1.498" 4 27 831Slot Pads
Code:1992; 3.9L NAOffset bolt pattern, High stall.
11" 1.810" 1.498" 4 27 873Mill Flat Pads
Code:1993-Up; 3.9L 873Offset bolt pattern, High stall.
59
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
A500 (lockup)
11" 1.810" 1.498" 4 26 563Slot Pads
Code: Blue decal1988-92; 3.9L 290High stall.
11" 1.810" 1.498" 4 26 564Slot Pads
Code: White decal1988-92; 5.2L 488Low stall.
11" 1.810" 1.498" 4 26 568Slot Pads
Code: White decal1988-92; 3.9L 627High stall.
11" 1.810" 1.498" 4 26 565Slot Pads
Code: Red decal1988-91; 360ci 286120 gram tri-weight, Low stall.
11" 1.810" 1.498" 4 26 567Slot Pads
Code: Red decal1988-91; 360ci 725120 gram tri-weight, High stall.
11" 1.810" 1.498" 4 26 853Mill Flat Pads
Code: 853 White Decal1993-95; 3.9L 853High stall; reinforced with bearing.
11" 1.810" 1.498" 4 26 781Mill Flat Pads
Code: 781, 549, 5931996-Up, 3.9L 781Mounting pads 90o,Narrow ring gear 122T.
A500 (lockup) (continued on next page) ...
60
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
A500 (lockup) continued
11" 1.810" 1.498" 4 26 792Mill Flat Pads
Code: 792, 5991996-Up, 5.2L; 792Mounting pads 90o, Wide ring gear 130T
TF-8 (A727) non lockup 12� (narrow ring gear)
12" 1.810" 1.876" 4 19 090Slot Pads
Code:1962-66; All engines 090
12" 1.810" 1.876" 4 24 359Slot Pads
Code:1967-on; 318, 383ci & 400ci with steel crank 359No weight
12" 1.810" 1.876" 4 24 499Slot Pads
Code:1972-on; 360ci engine 499two 60 gram weights
12" 1.810" 1.876" 4 24 839Slot Pads
Code:1967-72; 440ci engine 839two 20 gram weights
12" 1.810" 1.876" 4 24 282Slot Pads
Code:1972-on 400ci; 1973-on 440ci enginetwo 50 gram weights 282
61
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
TF-8 (A727) non lockup 11� (wide ring gear)
11" 1.810" 1.876" 4 24 764Slot Pads
Code:1968-77; 225, 318, 383 & 360, 400, 440ci with 764steel crank; No weights, with 5/16" bolts.
11" 1.810" 1.876" 4 24 766Slot Pads
Code:1967-71; 426 Hemi w/steel crank NANo weights, with 7/16" bolts.
11" 1.810" 1.876" 4 24 641Slot Pads
Code:1972-75; 340ci engine 641two 25 gram weights
11" 1.810" 1.876" 4 24 918Slot Pads
Code:1971-77; 360ci engine 918two 60 gram weights
11" 1.810" 1.876" 4 24 145Slot Pads
Code:1972-77; 400, 440 145two 50 gram weights
11" 1.810" 1.876" 4 24 526Slot Pads
Code:1978-on; 225, 318ci 506No weights, Low stall.
11" 1.810" 1.876" 4 24 387Slot Pads
Code:1978-on; 225, 318ci 492No weights, High stall.
TF-8 (A727) non lockup 11" (wide ring gear) - ( continued on next page) ...
62
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
TF-8 (A727) non lockup 11� (wide ring gear)
CHRYSLER
11" 1.810" 1.876" 4 24 389Slot Pads
Code:1978-on; 400, 440 580one 100 gram tri-weight, Low stall.
11" 1.810" 1.876" 4 24 390Slot Pads
Code:1978-on; 400, 440 490one 100 gram tri-weight, High stall.
11" 1.810" 1.876" 4 24 524Slot Pads
Code:1978-on; 360ci engine 494one 120 gram tri-weight, Low stall.
11" 1.810" 1.876" 4 24 400Slot Pads
Code:1978-on; 360ci engine 692one 120 gram tri-weight, High stall.
13.875" 1.810" 1.876" 6 24 590Slot Pads
Code:1989-Up; Cummins diesel 654Non lockup unit, Low stall.
13.875" 1.810" 1.876" 6 24 590HSSlot Pads
Code:1989-Up; Cummins diesel NANon lockup unit, High stall.
63
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
TF-8 (A727) lockup
11" 1.810" 1.876" 4 23 561Slot Pads
Code:1978-on; 225, 318ci engine 850No weight, Low stall.
11" 1.810" 1.876" 4 23 562Slot Pads
Code:1978-on; 225, 318ci engine 405No weight, High stall.
11" 1.810" 1.876" 4 23 559Slot Pads
Code:1978-on; 360ci engine 886120 gram tri-weight, Low stall.
11" 1.810" 1.876" 4 23 569Slot Pads
Code:1978-on; 360ci engine 162120 gram tri-weight, High stall.
11" 1.810" 1.876" 4 23 566Slot Pads
Code:1978-on; 400ci engine 432100 gram tri-weight, Low stall.
11" 1.810" 1.876" 4 23 566HSSlot Pads
Code:1978-on; 400ci engine 410100 gram tri-weight, High stall.
13.875" 1.810" 1.876" 6 23 591Slot Pads
Code: 5061993-on; V10 truck 656
TF-8 (A727) lockup (continued on next page) ...
64
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
TF-8 (A727) lockup (continued)
CHRYSLER
13.875" 1.812" 1.876" 6 23 592Slot Pads
Code: 634, 644, 8681993-on; Cummins diesel 655
11" 1.810" 1.876" 4 24 526Slot Pads
Code:1990-91; 225, 318ci 506No weights, Low stall.
11" 1.810" 1.876" 4 24 387Slot Pads
Code:1990-91; 225, 318ci 492No weights, High stall.
11" 1.810" 1.876" 4 24 389Slot Pads
Code:1990-91; 400, 440 580one 100 gram tri-weight, Low stall.
11" 1.810" 1.876" 4 24 390Slot Pads
Code:1990-91; 400, 440 490one 100 gram tri-weight, High stall.
11" 1.810" 1.876" 4 24 524Slot Pads
Code:1990-91; 360 ci engine 494120 gram tri-weight, Low stall.
A518, A618, 46RH OD - non lockup
65
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
A518, A618, 46RH OD - non lockup (continued)
11" 1.810" 1.876" 4 24 400Slot Pads
Code:1990-Up; 360ci engine 692one 120 gram tri-weight, High stall.
11" 1.810" 1.876" 4 24 518Slot Pads
Code: 087, 125, 5181992-95; 5.2L 125Low stall.
11" 1.810" 1.876" 4 24 862Slot Pads
Code: 681, 862, 8631992-95; 5.2L NAHigh stall.
11" 1.810" 1.876" 4 24 520Slot Pads
Code: 085, 5201992-95; 5.9L; 520120 gram Square weight, Low stall.
11" 1.810" 1.876" 4 24 125Slot Pads
Code: 124, 1251992-95; 5.9L; NA120 gram Square weight, High stall.
11" 1.810" 1.876" 4 24 546Slot Pads
Code: 5461996-on; 546Mounting pads offset 90o, High stall.
13.875" 1.810" 1.876" 6 24 590Slot Pads
Code:Cummins Diesel 654Low stall.
A518, A618, 46RH OD - non lockup (continued on next page) ...
66
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
13.875" 1.810" 1.876" 6 24 590HSSlot Pads
Code:Cummins Diesel 654High stall.
11" 1.810" 1.876" 4 23 561Slot Pads
Code:1990-92; 225, 318ci engine 850No weight, Low stall.
11" 1.810" 1.876" 4 23 562Slot Pads
Code:1990-92; 225, 318ci engine 405No weight, High stall.
11" 1.810" 1.876" 4 23 559Slot Pads
Code:1990-92; 360ci engine 886120 gram tri-weight, Low stall.
11" 1.810" 1.876" 4 23 569Slot Pads
Code:1990-92; 360ci engine 162120 gram tri-weight, High stall.
11" 1.810" 1.876" 4 23 566Slot Pads
Code:1990-92; 400ci engine 432100 gram tri-weight, Low stall.
A518, A618, 46RH OD - non lockup (continued)
A518, A618, 46RH OD - lockup
67
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER
A518, A618, 46RH OD - lockup (continued)
11" 1.810" 1.876" 4 23 566HSSlot Pads
Code:1990-92; 400ci engine 410100 gram tri-weight, High stall.
11.25" 1.810" 1.876" 4 23 878Slot Pads
Code: 514, 875, 878, 879, white decal1992-95; 3.9L, 5.2L 878High stall.
11.25" 1.810" 1.876" 4 23 642Slot Pads
Code: 642, 6431993-95; 5.9L 642100 gram square weight, High stall.
11.25" 1.810" 1.876" 4 23 785Slot Pads
Code: 591, 595, 767, 785, 7871996-on; 5.2L, 5.9L 785Mounting pads 90o.
13.875" 1.810" 1.876" 6 23 592Slot Pads
Code: 644, 8681993-on; Cummins Diesel 655Does not interchange with 591 (656)
13.875" 1.810" 1.876" 6 23 591Slot Pads
Code: 5061993-on; V10 Gas 65612.25" bolt circle dia.
68
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER
45RFE
11.625" 1.812" Grooved 4 29 R-36w/flats Pads
Code: B11999-Up Jeep NA
A40 SERIES
A340 SERIES
11.5" .750" 1.498" 6 26 TO-35Slot Pads
Code:1989; 3.0L Dodge Raider TOY-343
10.5" .750" 1.498" Ring w/ 26 TO-25Slot 6 holes
Code:1987; 2.6L Dodge Raider, Dakota, Ram NA6 threaded holes, 2 line up holes; Non-Lockup
11.375" .825" 1.498" 4 26 TO-37Slot Pads
Code: Green circle with red dot1987-on; 4 cyl. Jeep Cherokee, Grand Wagoneer TOY-350
11.375" 1.810" 1.498" 4 26 TO-28Slot Pads
Code: Green circle with pink or white dot1987-on; 6 cyl. Jeep Cherokee, Grand Wagoneer TOY-342
CHRYSLER-IMPORT
PHOTO NOTAVAILABLE
69
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER-IMPORT
KM SERIES (F3A21/F4A23) non lockup
10" .863" 1.690" Ring 22 CT-5Mill Flat 3 Holes
Code:1979-81; Champ, Colt KM170
10" 1.065" 1.690" Ring 24 CT-6Mill Flat 3 Holes
Code: Green paint dot1982-88; Colt KM180
10" 1.065" 1.690" 3 20 CT-16Mill Flat Pads
Code: 41, P11992-94; Colt 1.5L KM182(10x1.50) Thread Pitch - GM 9.8mm bolt fits
11" 1.065" 1.690" 4 20 CT-13Mill Flat Pads
Code: LK1992; Lazer, Talon Turbo 4x4 KM183(10x1.50) Thread pitch - GM 9.8mm bolt fits
11" 1.065" 1.690" 4 20 CT-13-1Mill Flat Pads
Code: 6K(10x1.25) Thread pitch KM183A
KM SERIES (F4A33) non lockup
KM SERIES - ( continued on next page)
SEE MITSUBISHI SECTION FOR OTHER APPLICATIONS ...
70
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CHRYSLER-IMPORT
KM SERIES (F3A21/F4A23) lockup
10" 1.065" 1.690" Ring 20 CT-10Mill Flat 3 Holes
Code: 51, 56, S2, S4, X41989-up; Laser, Talon KM176
10" 1.065" 1.690" 3 20 CT-11Mill Flat Pads
Code: 71, P2, W21989-up; Colt, Summit KM177
10" 1.065" 1.690" 3 24 CT-8Mill Flat Pads
Code: A21990-Up Dodge Colt DL 1.5L KM173
10" 1.065" 1.690" Ring 20 CT-12-1Mill Flat 3 Holes
Code: IF, IQ, KV1993-up; Colt, Vista KM178AFlush mounted ring gear; 10x1.25 Thread pitch
11" 1.337" 1.690" 4 20 CT-15Mill Flat Pads
Code: MM, MT1991-up; Stealth KM175/A(10x1.50) Thread pitch - GM 9.8mm bolt fits
11" 1.337" 1.690" 4 20 CT-15-1Mill Flat Pads
Code: 3M, 3T1991-up; Stealth KM175B(10x1.25) Thread pitch
KM SERIES (F4A33) lockup
SEE MITSUBISHI SECTION FOR OTHER APPLICATIONS ...
71
DIA Pilot Hub Mount Spline Part No.
CHRYSLER
CH
RY
SLE
R
CHRYSLER-IMPORT
ZF4HP18FL
11" 1.575" 1.690" 3 34 R-34Slot Pads
Code: G71988-on; Jeep Eagle Premier, Monaco ZF25
10" .785" 1.650" 4 18 DA-8Mill Flat Pads
Code: GB, GF, GH, GI, GL, GHA, GKA, GLA, GXA, GYA, OH, OI1983-Up; Dodge Conquest 3N7-D13Lockup; .450" tall mtg. pads; Low stall
11" .785" 1.650" 4 20 DA-14Mill Flat Pads
Code: L, ZB1986-on; Dodge Conquest 3N7-D16Lockup; 2.875" Hub length; Low stall
4N71B
SEE NISSAN SECTION FOR OTHER APPLICATIONS ...
Recommended