Upgrading your go kart torque converter

Upgrading your Go Kart Torque Converter

www.cvtclutch.com

Go karts need go kart torque converters in order to function.

It is basically a type of fluid coupling that enables the engine to rotate independently from the

transmission.

Upgrading the torque converter is a basic choice of kart racers and

owners.

If you are planning to upgrade your go kart torque converter, here are some steps to do...

Bolt the torque converter housing into the engine. Once bolted, it is a sure thing that the engine will

speed-up.

Fasten the fins snugly onto the go kart housing using a set of bolts.

The torque converter is basically made up of fins and it is a must to tightly fix then onto the housing for maximum equalization of the torque converter to the engine.

Connect the turbine next to the kart’s transmission. The turbine spins as the fluid enters and the

torque converter moves as a result.

Connect the stator to the middle-most part of the torque converter

By doing this, the fluid coming from the turbine is redirected so it

does not hit the pump all over again. As a result, the torque

converter will work at its peak.

Upgrading the torque converter is a surefire way to get the

maximum performance from your go kart. Expect to have smooth

driving and optimum go kart racing.

Get high performance go kart torque converter

and expect your race to be at its best.

You can choose from the huge range of go kart components like

torq a verter at

cvtclutch.com