WAC 296-155-Part L Construction Cranes, Rigging, and Personnel Lifting

WAC 296-155-Part L Construction Cranes, Rigging, and Personnel Lifting

Welcome and Introduction

2

Brad Solheim/Steve HeistBrad Solheim/Steve Heist

Crane Safety SupervisorCrane Safety Supervisor

Technical Specialist Technical Specialist

Bellevue, WA 2006

Topics to be Covered

Construction Crane:– Certification Requirements– Crane Operator Qualifications and Requirements

Changes/Additions to 296-155 Part L– Power Line Clearances– Signal Person Requirements– Rigger Qualifications– Responsibilities

6

296-155-Part L

7

Phase 1- Effective January 1, 2010 (Crane Safety Rule)

Crane Certification• Construction Industry• Annual Certification• Accredited Crane Certifier

Operator Qualifications• Valid operator’s certificate• Operating hours and Crane related experience

Crane Types Includes: Mobile, Articulating, Tower cranes when used in the

construction industry

296-155-Part L

8

Cranes Included (cranes used in construction)• Mobile Cranes Crawler Cranes• Lattice Boom Hydraulic Telescoping Boom• Articulating Rough Terrain Cranes • Tower Cranes Self Erecting Tower Cranes• Digger Derricks*

Exempt (crane certification and operator certification)• Excavators Backhoes• Conveyors Concrete Pumper Truck• Forklifts* Dedicated Drilling Rig• Digger Derricks* (WAC 296-45) (WAC 296-32)

Washington State Crane Rule

9

Phase 2- Effective February 1, 2012 WAC 296-155, Safety Standards for Construction Workers,

Part L • As effective as OSHA

• Reducing fatalities and injuries at the construction site

• Out dated standards

• Addressing new technology

• Current Nationally Recognized Safety Standards

• 270 pages

• February 1, 2012

296-155 Part L

DOSH:

Certification of crane, operators, & certifiers.

Self-Erecting Tower Cranes

Rigging/signaling requirements (Current ASME)

Assembly/Disassembly Director

Duties of Site Supervisor, Crane owner, user, Lift director, crane operator.

OSHA four year phase in of operator certification. 2014

Nothing on self-erectors

No certification of cranes

OSHA exempts articulating Cranes (delivery)

10

Changes/Differences

Rigger and Signal Person Qualifications

WAC 296-155-Part L

Qualified Rigger (296-155-53306)

12

Rigger

A Qualified Rigger is a rigger who meets the requirements in WAC 296-155-53306

This applies to construction material handling activities for cranes, derricks, powered industrial trucks.

When required:

13

Rigger

– During hoisting activities when Assembling or Disassembling a crane

– Whenever workers are within the fall zone:• During the initial connection of a load to

a component or structure• Hooking, unhooking, guiding a load

14

Riggers (cont’d)

Qualification Requirements:– Know and understand the

requirements of applicable ASME standards: B30.7-2006 Base-Mounted Drum Hoists, B30.9-2010 Slings, B30.10-2009 Hooks, B30.16-2007 Overhead Hoists (Underhung), B30.20 Below the Hook Lifting Devices, B30.21 Manually operated Hoists, B30.26 Rigging Hardware.

15

Riggers (cont’d)

Qualification Requirements:– Competent in the application of the

type of hitches used

– Basic understanding of crane operation

– Know and understand rigging related conditions, such as load weight estimation, center of gravity, effect of angles on rigging components and basic hand signals, as applicable.

16

Riggers (cont’d)

– Know and understand rigging selection and capacity ratings

– Know and understand the type of sling and hitch used

– Know rigging hardware

Riggers (cont’d)

Qualification Requirements: (July 31, 2012)

– Demonstrate through a written test, and a practical test

– Documentation from qualified evaluator

• A Third Party Qualified Evaluator • An Employer Qualified Evaluator

– An Employer's Qualified Evaluator under this option is not portable

18

Requirements WAC 296-155-329  Qualified person‑-Rigging.

• Rigger requirements have been moved to;

(WAC 296-155-53306)

WAC 296-155-330  Rigging Equipment• Rigging requirements have been moved (see WAC 296-155-556 through 296-155-562)

19

Qualified EvaluatorA person who has demonstrated that he/she is competent in accurately assessing whether individuals meet the qualification requirements for signal persons or riggers, per 296-155-53302 and 53306.

Third Party Qualified Evaluator– means an entity which is independent from the signal person’s or the

rigger’s employer.

Employer (not a third party)– means a person employed by the signal person’s or the rigger’s

employer.

20

Signal Persons Qualifications 296-155-53302

21

Signal Person (Feb 1,2012)

This applies to construction activities which involve cranes and powered industrial trucks which have been configured to hoist and lower by means of a winch or hook

Who meets the requirements of WAC 296-155-53302

22

Signal Person Required

– Point of operation is not in full view of operator– View of direction of travel is obstructed– Site specific safety concerns which the operator

or person handling the load determines it necessary

– Working near energized power lines and a dedicated spotter is used, in addition to other responsibilities they must also meet the signal person qualifications

– Any time someone is signaling a crane

Signal Person Qualifications

Qualification Requirements:– Know and understand the type(s) of signals

which will be used– Competent in the application of the type of

signals used– Have a basic understanding of equipment

operation and limitations, crane dynamics, and boom deflection

24

Signal Person Qualifications

Qualification Requirements:– Demonstrate knowledge and skill through

a verbal or written test, and through a practical test

– Documentation from qualified evaluator• A Third Party Qualified Evaluator• An Employer Qualified Evaluator

– An assessment by an Employer's Qualified Evaluator under this option is not portable

25

Qualified EvaluatorA person who has demonstrated that he/she is competent in accurately assessing whether individuals meet the qualification requirements for signal persons or riggers, per 296-155-53302 and 53306.

Third Party Qualified Evaluator– means an entity which is independent from the signal person’s or the

rigger’s employer.

Employer (not a third party)– means a person employed by the signal person’s or the rigger’s

employer.

26

Qualified Riggers and Signal Persons

Qualification

Options

Documentation

Required Portable

Expiration

Date

3rd Party Qualified Evaluator

Yes Yes5 Yrs

maximum

Employer Qualified Evaluator

Yes No

5 Yrs

maximum

27

Qualified Riggers and Signal Persons

Qualified Rigger________________________________

Date _______________________

Rigging Type: Chain Slings Wire Rope Synthetic Metal Mesh

Rigging Hardware: Shackles Turnbuckles Eye Bolts Wire Rope Clips

Third Party EvaluatorEmployer EvaluatorEvaluator Name_______________________________Evaluator Company____________________________ 28

•The employer must make the documentation for whichever option is used available at the site while the rigger or signal person is employed by the employer.• The documentation must specify each type of rigging and signaling type • The documentation must specify each type of signaling

Sample DocumentationQualified Signal Person__________________________

Date _______________________

Signaling Type: Voice Hand Radio Other_______________

Crane Type: Mobile Tower Articulating Overhead

Third Party EvaluatorEmployer EvaluatorEvaluator Name_______________________________Evaluator Company____________________________

Qualified Riggers and Signal Persons

29

Required Documentation

•The testing of the practical and written documentation for whichever option is used available at the site• The documentation must specify each type of rigging and signaling type

A telescopic boom Powered Industrial Trucks configured with a winch or hook DOES fall under the scope of Part L.

Manufacturer’s written approval is required before using attachments

Forklifts and Construction A vertical mast Powered

Industrial Truck when configured with a hook would not fall under the scope of Part L.

Rigging (Part F-1) Operation (Chapter 863)

Manufacturer’s written approval is required before using attachments

32

WhatWhy Who

Qualified Riggers

33

WhatWhy Who

Qualified Riggers

Power Line Safety WAC 296-155-53408

34

Power Line Safety Requirements If the crane or rigging could get closer than 20/50 feet to an

energized power line there are new safety requirements which apply. 

If the crane or rigging can not get closer than 20/50 feet to the line even if the crane is operated at its maximum working radius, the 20/50-foot requirement is satisfied.

Minimum approach distance:

Up to 350kv 20 Feet

Over 350KV 50 Feet

35

Power Line Safety

Crane assembly/disassembly below energized power lines is prohibited.

Crane assembly/disassembly inside Table 4 is prohibited.

36

Operation of Crane/Derrick

Identify the work zone by demarcating boundaries. (flags, or devices/limiting)

Determine maximum working radius/360 which includes rigging & load. If could get closer than 20 ft of a power line.

Employer must meet requirements in Option (1)(2) or (3)

Power Line Safety Requirements Crane operations near power

lines, use one of 3 Options– Option 1 - Deenergize & Ground

Power lines

– Option 2 - Maintain 20/50 foot clearance

– Option 3 - Obtain power line voltage from Utility Owner/Operator and ensure the crane or rigging does not get closer than the distances listed in Table 4

38

Power Line Safety Requirements

Work Zone360 degrees around the crane (maximum working radius) Demarcate work zone boundariesand prohibit the operator fromoperating the crane past those boundaries

Power Line Safety Requirements Options 2 and 3 also require the

following: Installing an elevated warning line or

barricade 20/50 feet from Power Line, and

Implement at least one of the following:

• Proximity alarm (OSHA exempt)

• Dedicated spotter• Range control warning device• Range Movement limiter• Insulating link (OSHA exempt)

40

41

Could you get within 20 feet of a power line?

YES NO

Option #1 Deenergize & Ground

Encroachment Prevention Measures

Option #3Ask Utility for Voltage and Use Table 4 (with minimum

clearance distance)

Option #220-foot Clearance

No Further Action

• Planning Meeting• If Tag Lines are Used, They Must be Nonconductive• Elevated Warning Lines, Barricades, or Line of Signs

PLUS (Choose One):

• Spotter, Warning Device, Range Limiter.

Power Line Safety Requirements (Part L before 2/1/2012)

For energized power lines rated at or below 50kV the minimum approach distance shall be 10 ft.

For lines rated over 50 kV., minimum clearance between the lines and any part of the crane or load shall be 10 feet plus 0.4 inch for each 1 kV. over 50 kV., or twice the length of the line insulator, but never less than 10 feet

42

Power Line Safety Requirements (Current Part L)

Minimum Clearance Distances Table 4

Voltage Minimum clearance distance

up to 50 (kV) 10 (feet)

over 50 to 200 15

over 200 to 345 20

over 345 to 500 25

over 500 to 750 35

over 750 to 1,000 45

43

That was

easy

EXAMPLE 1a

OSHA examples

EXAMPLE 2

47

Responsibilities: Duties of Assigned Personnel Crane Owner:

• Has custodial control of a crane by virtue of lease or ownership.

Crane User:• Arranges the crane's presence on a worksite and controls its use there.

Site Supervisor:• Exercises supervisory control over the worksite on which a crane is being used and over the work that is being performed on that site. (WAC 296-155-53408 Power line Safety implemented)

48

Duties of Assigned Personnel (cont) Lift Director:

• Directly oversees the work being performed by a crane and the associated rigging crew.– (WAC 296-155-53408 Power Line Safety implemented)

Crane Operator: Directly controls the crane's functions.

49

Assembly/Disassembly

50

Personnel Lifting Platforms 296-155-547

20 Pages Personnel Lift Design Personnel Lifting Hoisting Equipment Crane Derrick Requirements Inspections (lift and cranes) Lift proof load tests Trial lift Crane Operation Requirements Employer’s responsibilities Personnel Lift Supervisor’s responsibilities Lifting Personnel

51

Rigging 296-155-556 - 562

70 Pages Slings

– Chain

– Wire Rope

– Metal Mesh– Synthetic Rope slings, Web slings, Round slings

Includes – Design– Maintenance Repair– Testing

– Use 52

Rigging 296-155-556 - 562

Rigging Hardware– Shackles

– Turnbuckles

– Eyebolts

– Wire rope Clips

– Wedge Sockets

Includes – Design– Maintenance Repair– Testing– Operation

53

Rigging 296-155-556 - 562

Lifting Device by Types– Structural lifters– Mechanical lifters– Vacuum lifters– Lifting Magnets– Grapples

Includes – Design– Maintenance Repair– Testing– Operation 54

Questions?

Brad Solheim425.990.1470sols235@Lni.wa.gov

Steve Heist360-902-5582heiu235@lni.wa.gov