Y Vacuum Sucker for Drilling - Karcher Shop Vac 35 mm OD · through the exit pipe into your vacuum...

Summary

Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" (https://www.thingiverse.com/thing:2939576)! Great design since through the holeyou still have full visibility on what you are doing, while in the same timethrough that hole air is sucked in, picking up the dust and then out it goesthrough the exit pipe into your vacuum cleaner. Due to the vacuum itcreates, this 'thing' also sucks itself a bit against the wall. Overall muchbetter than some of the 'cup-types' I have seen till date.

This is not really a 'remix'. The original design is for a vacuum hoseconnection with an outer diameter of 30 mm. I just resized the originaldesign accurately in Meshmixer such that it fits perfectly on my KarcherWD 3 shop vac which has an outer diameter of 35 mm. Credits toJonnieZG.

Hobby & Makers > Tools

sucker vacuum drilling dril karcher

Unassociated tags: shop vac, vacuum adapter

P Petclaud

Vacuum Sucker forDrilling - KarcherShop Vac 35 mmOD

VIEW IN BROWSER

updated 15. 1. 2020 | published 15. 1. 2020

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

830.8 KBupdated 15. 1. 2020

Category: Machine Tools Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: Yes

Resolution: 0.15 or 0.20

Infill: 20%

Notes:

Print in the orientation as per the STL file and with supports ON. Suggestto use 3 or 4 perimeters, to avoid very small infills in the exit pipe.

Not so much supports are needed - see Slic3r screen. It will print in some3,5 hours

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

vacuum_sucker_for_drilling_35_mm.stl

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition