View
118
Download
4
Category
Preview:
Citation preview
Estik™ Electronic Surface Thermometer
Thermocouple Band Replacement Instructions
Step 1
Unscrew and remove both stainless steel halves.
2
Step 2
Remove the aluminum back plate.
3
Step 3
Unscrew and remove both thermocouple connecting screws, and remove the old thermocouple.
4
Step 4
Insert the new thermocouple, secure its feet and replace screws. Test the unit on the surface of a known or estimated heated object >32°F to <1000°F.
5
Step 5
Reinsert the aluminum back plate.
6
Step 6
Reinsert stainless steel half moon and secure them in place with screws.
7
Recommended