Getting Started with Hardware Factory&Store @ Make Conference Tokyo 2012

GettingStartedwith HardwareFactory&StoreShingo Hisakawa@hisashin

What I Fab&Sell

Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”

NO SKILLWeb&Android Programmer

NO TIMEWeekend Maker

NO MUCH MONEYNo Expensive Tool nor Outsource

What I Fab&Sell

Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”

NO SKILLWeb&Android Programmer

NO TIMEWeekend Maker

NO MUCH MONEYNo Expensive Tool nor Outsource

What I Fab&Sell

Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”

NO SKILLWeb&Android Programmer

NO TIMEWeekend Maker

NO MUCH MONEYNo Expensive Tool nor Outsource

What I Fab&Sell

Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”

NO SKILLWeb&Android Programmer

NO TIMEWeekend Maker

NO MUCH MONEYNo Expensive Tool nor Outsource

HowTo1. Read Open SchematicsGoogle Prototype (¥31500 / $400)

2. Change As You WantHarpy (¥2880 / $35)

3. Layout and Order PCB by EmailFusion PCB (¥80 / $1)

4. Buy Parts at Akihabara or WebDigikey

5. Laminate Solder Stencil50μmStep Cutting Tool(¥27000 / $340)100μm Laminate Film (¥3 / ¢4)EAGLE Data

DXF DataSolder Stencil

6. SolderingJapanese Pizza Oven (¥2000 / $25)

orCheapest Pro Oven (¥20000 / $250)

Paste Solder Cream

Place PartsDone!

Now,You can prototype without risk.

But Imagine to place40 SUPER SMALL PARTS

on each 100 boards to sell.

FPGA-CAFE at Tsukuba OpenSource: FREE (FabLab) Closed: Cheaper than Outsource

7. Self Gas Station : Laser Cutter

8. Self Gas Station: Tip Mounter & OvenFPGA-CAFE at Tsukuba OpenSource: FREE (FabLab) Closed: Cheaper than Outsource

9. Sell on the WebJimdo Pro(¥11340 / $150)

10. Pack & ShipFew minutes is enough on weekday

http://www.harpyhack.com

Let me share and Start Together