We are a professional laser equipment and body slimming manufacturer, located in China.Our main products include beauty machine, diode laser hair removal ,jet peel machine, IPL hair removal, co2 surgical system , weight loss machine, ect. In addition we also introduce advanced production equipment and employ specialized personnel to strictly monitor each productin process. Now our products are well received by large chain beauty salons、clinics、spas and hospitals, ect. If you are in need of any body slimming machine and hair removal equipment and other related produccts, pls contact us and we will always at your service.
- 1. Diode Laser System X6User ManualCHARMINGLASER
2. Technical Parameter:Laser type AIGAAS DIODEARRAYS
CWWavelength 808nmPower 500Watts/300WattsWorking model HR,
SHR,SRRepetition rate SHR-10HZ; HR-0.5Hz-5Hz; SR-1Hz-4HzSpot size
12mm*12mmEnergy density SHR up to 25J/cm2; HR up to 120J/cm2; SR up
to 20J/cm2Pulse duration 10ms-1400msCooling Direct coupling through
sapphire tipDualChill Intrgrated Skin Cooling 4C Contact
coolingElectrical 110/220V 15A max 50/60HzDimensions
400*550*1260mmWeight 55KgCHARMINGLASER 3. About Charming :Charming
Electronic Technology Company is a professional laser equipment and
body slimming manufacturer,located in China.Our main products
include beauty machine, diode laser hair removal ,jet peel machine,
IPL hairremoval, co2 surgical system , weight loss machine, etc.In
addition we also introduce advanced production equipment and employ
specialized personnel to strictly monitoreach productin process.
Now our products are well received by large chain beauty
salonsclinicsspas and hospitals,ect. If you are in need of any body
slimming machine and hair removal equipment and other related
produccts, plscontact us and we will always at your service.Our
ownfactory--------- highqualityequipment at low priceSince 1993, we
have been manufacturing IPL equipment , and have been registered
for manufacturing RF beautyequipment for a long time. Over 10years
of research and development of beauty products enables us to offer
acomplete range of laser beauty equipment and body slimming
machine. Due to this we have got the certificate ofregistration of
RF beauty equipment.To ensure the quality, we establish
long-standing cooperative relationship with raw material suppliers,
so we areable to acquire high quality materials at low price.Add:
82# 3F Beauty Exchange City , Guangyuan West Road,Guangzhou
,China.Mobile :+86
13924179119Tel:+86-20-62670737Website:www.charminglaser.comEmail:
[email protected] 4. Chapter 1 Brief
IntroductionThis equipment is designed to conform to international
standard. The operator has to be trained with correctoperation
procedure. Before operating on this equipment, please read this
user manual carefully. If you have anyquestions about this user
manual, please contact with our company.Caution!The other
controlling, adjustment or operation procedure of this equipment
beyond scope of this user manual mayresult in danger to operator
and patient.So before operation, the operator shall be familiar
with the safety requirement and operation procedures of
thisequipment.This user manual shall always accompany with this
system and all the operators shall know this user manual.This
manual provides product images are for reference only, actual
appearance please subject to real product.1.1MaintenanceThis
equipment needs periodic test and maintenance. And the procedure
can be done only by professional technicalmember.If you failed in
sealing for help from our company because of unclear of warranty
period, please contact with ourcompany.1.2 System ReformAny system
reform unauthorized by our company will lead to warranty failure.
Besides our company has noresponsibility for any reformed
system.1.3 Symbols & Meanings Inch Centidegree Degree
FahrenheitA AmpereAC Alternating Current (AC)cm CentimeterCw
Continuous Wave(CW)Hz HertzIEC International Electric CenterIVF
Living FIRTILIZATIONJ Joule(unit of energy) (J)J/cm2 Joules per
square centimeterKg KilogramLbs. PoundLCD Liquid CrystalDisplay
(LCD)LED Light-Emitting Diodem Metermm Millimeternm NanosecondOD
Optical Density (OD)Rep Rate Repetition RateSec SecondHR Hair
RemovalSHR Swift Mode Hair RemovalSRP SkinST Skin TightenTEC
Electric CoolingV VoltageVAC Voltage ACW WattNote: Before using the
instrument, please check the local laws and regulations. If it
violates any locallaws and regulations,it is not authorized to
use.CHARMINGLASER 5. Chapter 2 Operation Safety2.1 SummarizeThis
chapter describes safety of diode laser system X6, mainly optical
and electrical safety.Caution!When press down emergency switch,
dangerous voltage is broken. This equipment has adopted special
design tominimize possible accident danger and radiation
danger.2.2. System Safety TestX6 is designed to maximize safety of
doctor and patient.2.2.1. Electrical Safety1. On the maintenance
panel, there is an electricity breaker. When overload happens, the
electricity breaker willprotect system. Turn on the equipment
again, please uplift the electricity breaker;2. Software protection
contains:* After starting the equipment, the system tests all the
relative safety hardware.* Monitor system goes on working during
treatment.* When error happens, system would show error message for
operator and stop any operation.3. After starting the equipment,
the connected handpiece will do self-test as well;4. After starting
the equipment, electrical circuit will do self-test. This test will
go on during treatment.2.2.2 Laser Safety1. Closed light conductor
will lead light to skin area to be treated with. The light emits
from the front part of thelight conductor;2. When emergency switch
is pressed down, the system would stop running;3. The system has an
emission indicator: One blue indicator locates on the top of
handpiece;4. When system is ready for emission, the blue indicator
will light;5. Only when press footswitch and press switch on
handpiece at the same time, the laser can be emitted - it willavoid
misusing;6. After starting the equipment, water circulation will
cool the handpiece immediately;7. Test the temperature of water to
avoid handpiece too hot; if water stops running or water
temperature is morethan 40 degrees,the laser cant emit;8. This
equipment equips with medical footswitch for convenient using. It
will avoid any short-circuit and increasethe durability.2.2.3
Treatment RoomThe treatment room must post a laser dangerous
mark.1. The treatment room shall not place any reflective objects
including mirror;2. Only allow people well trained to enter the
room;3. Make sure that operator is familiar with using of this
equipment and turn off system in the emergency.2.2.4 Prevention1.
Read this user manual carefully before using this
equipment;CHARMINGLASER 6. 2. Always keep the handpiece clean.
Remember to wipe the cooling gel after each patient using;3. Be
careful when moving the equipment to avoid damage on human and
machine. Please handle it gently andmust not drop it down. MUST not
pull handpiece to move equipment.2.2.5 Caution1. Technical staff is
qualified to maintain the system,including adjust inner power,
cooling system;2. Make sure that X6s voltage is coincident with
your countrys. (110V or 220V)3. During maintenance, system shall be
turned off and unplug power cable since turned on system may
causedamage to operator or system;4. Please turn off the equipment
if you dont use it.5. Shall not let system stay at ready condition
for too long time;6. Person who isnt trained cant operate this
equipment.7. Unless the handpiece is placed on the skin to be
treated with, dont press footswitch and handpiece switch;8. During
maintenance,the system could not be turned on, opened or without
Persons attention.2.3 Relative Caution about Laser Emission2.3.1
Burn HazardX6 emits invisible light with wavelength 810nm which can
burn eyes with third- degree burns. Please be careful.2.3.2 Eye
Injury by Radiation1. In the treatment room, it is important that
all the persons (patient and doctor) wear the protective glasses;2.
Even if the patient wears the protective glasses,he shall close
eyes during treatment;3. If the treatment area is very close (such
as eyelid) to eyes,patient need to wear cornealprotector.2.3.3
Safety GlassesScattering from diode can do harm to eyes. All the
persons have to wear safety glasses. Ensure that safety glassescan
provide enough protection (OD>5).This equipment is equipped with
operator safety glass and patient goggles. You can order more from
our company.2.3.4 Explosion and Fire Danger1. This equipment is not
allowed to use in the presence of a flammable anesthetic mixture
with air or with oxygenor nitrous oxide. Do not operate it in the
presence of volatile solvents such as alcohol or gasoline;2. While
using this equipment, we advise you to wear clothes with fire
prevention materials and fire preventionfunction;3. Areadily
accessible fire extinguisher in the vicinity of the system is also
recommended.2.3.5 High Voltage HazardVoltage of this system is
220V/110V. To prevent injury, make sure machine is well installed
with preventive coverbefore using this system. Do not disassemble
preventive covering. X6 generates high voltage in several parts
andsome parts may still has electricity after unplug the power, so
only our company authorized technical personnel canmaintain the
system. Never leave the system turned on or unattended during
system maintenance.2.3.6 System GroundingThe system can be grounded
through the grounding conductor and grounding pin in the power
cable.CHARMINGLASER 7. 2.3.7 System SafetyThe system has many
safety features. Clinical persons shall be familiar with the
position and operation of thesesafety devices.2.3.8 Emergency
Shut-OffKnobThe system has emergency shut-off knob for emergency
shutdown. When press emergency switch, it immediatelydisables the
power. To continue normal operation, release the emergency shut-off
knob, then you can restart thesystem.2.3.9 Laser Emission
IndicatorsThe system has special laser emission indicators: LED
indicatorThe LED has three modes of operation: OFF --- When system
is in Standby Mode; On--- When system is in Ready Mode; Blinking
--- When laser beam is emiting (Both footswitch and handpiece
switch are activated.)2.3.10 Double-tiered Laser Emission
SecurityLaser beam emission is enabled only when footswitch and
handpiece switch are activated at the same time.These two
controlling devices help to reduce laser mistaken emission.2.3.11
FootswitchSystem uses medical footswitch to avoid short circuit and
ensure footswitch durability.2.3.12 Cooling SystemThe handpiece tip
adopts thermoelectric cooling method to reduce uncomfortable after
treatment. During treatment,tip temperature is less than 4C. The
cooling water and temperature are monitored to ensure no risk of
overheatingof the diode.2.4 HandpieceThe handpiece is designed to
ensure system safety:1. Since the handpiece generates laser, it
does not need other beam launching system. On the contrary,
handpiecehas an optical mixer. The optical mixer concentrates the
light of thousands of transmitters together to produce thebeam of
monochromatic square. As the laser beam is limited in the
handpiece, there is no harmful optical radiationin the console or
cable.2. While treatment,make the tip touch skin fully to reduce
light deviation and improve treatment effect.2.5 System
Classification according to IEC 60601-1 Classify according to
anti-electric shock protection method: system is class-I equipment;
Classify according to anti-electric shock protection degree: laser
tip is B type part; This equipment is not suitable for use in the
presence of a flammable anesthetic mixture with air or withoxygen
or nitrous oxide.CHARMINGLASER 8. 2.6 Equipment labelLocated on the
service panel, label information is in the following System name
and part number Serial number and date of manufacture System power
requirements Conform CE standard Anti-electric shock protection
degree and typePower supply requirement label: Locates on power
line connectorLaser emission danger label: Locates on system
panelHandpiece safety label: Locates on laser emission
partFootswitch label: Locates on maintenance panelFill/Drain water
label: On the back panelCHARMINGLASER 9. Chapter 3 Installation and
OperationSystem transportation and installation are carried out by
our company authorized technical person.Main items are:Unpack the
equipment and position it in its pre-selected locationVerify the
integrity of this equipment and its components;Connect handpiece,
footswitch and interlock system;Connect specified power outlet;Test
cooling water system;Test measurement and operation function of
system parts and software.Caution!Any damage or system damage when
open the package, please report to our company and to the insurance
carrierat once.3.1 Equipment RequirementsBefore unpacking, make
sure the installation location meet the following
requirements.3.1.1 Space and LocationThe working area and system
location shall meet equipment good ventilation, always ensure that
the system left thewalls or air obstructions at least 0.5m (20).
After determining the location, press the wheel top and pedal to
lockthe wheel braked. Thus system is fixed.3.1.2 Electrical
RequirementsSystem requires for an independent line
voltage:Monophase 110VAC10%, 20A, 50/60Hz or 220 VAC10%,10A,
50/60Hz.CHARMINGLASER 10. The input power should be no transient
current, voltage and current spark, no power vertical and surge.
Input powershall have no transient current, voltage and current
spark, no power vertical and surge. So this system shall beseparate
from other high-power electric equipment, such as elevator, air
conditioning, the giant motor.When connected with external power
supply, system is grounded through the grounding conductor in the
powercable. Proper grounding is very important for safe
operation.Caution!Ensure that use local correct power line (110 or
220 VAC).This equipment adopts independent lines and separated
circuit fuse. Unless the system use dedicated circuit, itcannot be
sure work normally.3.1.3 Environmental RequirementsAir quality:The
system should work in a non-corrosive atmosphere. Corrosive
substances such as acids can damage thesurface of the wires,
electronic devices and optical components. Dust in the air should
be kept to a minimum. Thedust particles absorb light and produce
thermal effects, while thermal particles will damage the surface of
theoptical components. Metal particles will corrode the electronic
equipment.Water quality:The system must use deionized water (pure
water or distilled water).Temperature and Humidity:Work
temperature:10-30C (50-85 F)Storage temperature:0-55C (50-1310
F)Work relative humidity: Max 80%Storage relative humidity: Max
90%Note!Prolonged use produces heat, it is recommended to install
air-conditioning in the room.3.2 Screen ConnectionThe screen is
easily installed and disassemble. And the screen should be install
on the front and top of the system.After unpacked, please fix the
screen with screws as picture showed below:Fix screen with
screws.CHARMINGLASER 11. 3.3 Handpiece Rack ConnectionThe rack
should be installed on left side of the system. Please install and
fix it with screws as picture showedbelow:3.4 Handpiece
ConnectionThe handpiece is designed to be easily changed and have
safety prevention. Handpiece is connected on the front ofthe
system. When insert or unplug the handpiece, you have to press the
button and clockwise turn the button 90Degrees. Put the handpiece
on the handpiece rack to protect handpiece.3.5 Footswitch
ConnectionTo improve safety of system while using, it is equipped
with a footswitch. Only when footswitch and handpiece arepressed
down, laser can be emitted. Please connect the footswitch onto the
power supply panel on the back of thesystemFix the rackwith
screws.footswitchconnectionOpen and lockHandpiece
rackPowercabletiPower switch2 FusesFill water/releaseRelease
airCHARMINGLASER 12. 3.6 Fill WaterWater quality will greatly
influence the system working and laser output, please use deionized
water only!The cooling water tank must be filled with deionized
water. Change water per month to ensure normal working
ofsystem.Filling water procedure:1. Tack off cover of TANK-EXHAUST
to release water tanks water.2. Connect funnel with WATER/DRAIN
(Following picture).3. Fill 3L deionized water. When water flows
from tank-exhaust, stops filling water.4. Put on TANK-EXHAUST cover
again and take away filling water tools.5. Connect power.6. Start
equipment and let it run for 5 minutes without activity.7. Be ready
for treatment.Note!MUST not fill running water into the water tank,
but fill deionized water only!Please be sure to let system run for
5 minutes before usage after each water add/ change. This process
makeswater have enough time to run over from handle to water tank
and to detect system fully.3.5 Release WaterWater should be
released when system is placed in environment where temperature is
lower than 4C or whensystem is on delivery.1. Take off cover of
TANK-EXHAUST.2. Put a container (about 3L) near the rear panel.3.
Connect a clean water pipe with Water of the equipment.4. Water
will flow out until there is no water in the tank.3.6
TransportationPlease followe these steps to move system:1. Put
handpiece in its rack.2. Unplug power code and footswitch.3.
Release water.4. Release wheelss lockers.5. Slowly push or pull
system with handles in front or back.CHARMINGLASER 13. Chapter 4
System description4.1 IntroductionThis chapter is a detailed
description of diode laser system, including main components,
controlling parts and eachsubsystem.4.2 ApplicationX6 diode laser
is a compact system with wavelength 810nm. The energy can go up to
120J/cm2.The whole system is constituted by main system, footswitch
and handpiece. During treatment, handpiece wouldtouch fully on skin
and laser pulse comes by pressing footswitch and handpiece at the
same time.The tip on top of handpiece has been done with cooled
system to lower skin temperature continuously duringtreatment.4.3
ComponentsMain System*1 LCD Screen*1 Handpiece*1 Rack*1Footswitch*1
Water Funnel*1 Power Cable*1 Tank-Exhaust Cover*1Goggles*1 Operator
Glasses*1 Keys*2 Fuse15A*2CHARMINGLASER 14. 4.4 X6 Casing
IntroductionNote: the above pictures are for reference only, please
object to real machine.4.5 Product Marks10.4" touch
screenHandlePlug-in holeWheelEmergencyPower KeyHandpiecHandle
RackanticreepiAirDraiWater/DrainFootswitch Fuse Powerline
anticreeping switchTank-ExhaustEmergency
SwitchHandpieceWheelsCHARMINGLASER 15. 4.6 Program
Introduction4.6.1 Main Screen DisplayThe screen shows mainly
parameters and treatment areas.4.6.2 Error DetectionThis equipment
equips self-detecting device. System is continuously monitored by
password lock. Softwarecontinuously detects the error of hardware.
If it find error, it will show error information.4.6.3 Control
panelIt includes:Emergency shut-off knob --- Red, mushroom-shaped
button, which is used for shut off system in the emergency;LCD
screen --- It supplies system;Key switch --- Start the system after
turning off equipment.4.6.4 Cooling SystemCooling system
contains:1. Water cooling system2. Thermoelectric cooling system
(TEC)3. FanCaution!To avoid overheating and system functional
faults, must not stem the air exit hole.4.6.4.1 Water
CoolingClosed-loop system operates with deionized water to achieve
water cooling. Its purpose is to make laser cavityhave a longer
life. Cooling system contains heat exchangers, water containers,
water pump and particulate filter.For security, when water
temperature gets to 40,laser energy emission function
fails.4.6.4..2 FanTwo fans are separately used for water cooling
and system cooling.4.7 Laser HandpieceIt contains diode laser
array, light crystal, medical protection window, cooling fins,
handpiece trigger mounted inthe handpiece and indicator.Mark 1Power
SupplyMark 2Laser SafetyMark 3FootswitchMark 4FuseMark 5Fill Water/
Release WaterMark 6Release AirCHARMINGLASER 16. Caution!The
handpiece contains precise optical components. Components may
suffer serious damage after falling. Becarefulwhile in use and in
delivery.4.8 Plug-in Type ConnectorThe plug-in connector for
handpiece is located in front of the system. Please press and ring
the button clockwise90 or counterclockwise 90 when install or
uninstall the handpiece.4.9 FootswitchFootswitch is brake pedal. It
is connected with connector on rear panel. Only when footswitch and
handpieceswitch are pressed at the same time, laser can be emitted.
These two controlling devices help to reduce lasermistaken
emission. Only when system is at Ready mode, footswitch and
handpiece switch can be started.4.10 Parameter Setting ModeUser can
control equipment by selecting different parameters:1. Application
mode2. Energy density3. Repetition frequency4.11 PauseFor security,
if there is no need of immediate laser emission, the equipment
shall stay at Standby situation. Ifoperator leaves treatment room,
the equipment shall be turned off.4.12 Parameter
Specifications4.12.1 OutputLaser type : Single Pulse Laser Double
Pulse LaserWavelength: 805nm~815nmEnergy Density: HR mode: up to
120J/CM2SHR mode: up to 25J/CM2SR mode: up to 20J/CM2Pulse
Repetition frequency: 0.5, 1.0, 2.0, 3.0, 4.0, 5.0, 10.0 HzSpot
size: 12mm*12 mm4.12.2 Operation and ControlSystem control LCD
touch screenLaser emission indicator OFF: No laser emission While
laser emission, indicator continupus lightCHARMINGLASER 17.
4.12.3Appearance Dimensions400mm*500mm*1260mmWeight: 50 KG4.12.4
Power Supply110VAC 20A,50Hz220VAC 15A, 50Hz4.12.5 Other
SpecificationsHandpiece: Multi-purpose, UnpasteurizedSkin cooling:
Thermoelectric, 4, Continuous, skin touch cooling4.12.6
ClassificationCDRLlaser classification, comply with 21CFR1040.10:
Section IV classLaser classification, comply with EN60825-1:
Section 4 classProtection against electric shock mode: I class
equipmentProtection against electric shock level: B type
equipmentCHARMINGLASER 18. Chapter 5 Control and IndicatorThis
chapter is detailed description of operation method for diode laser
system.Caution! According to local law of each country, only allow
authorized person to operate this equipment. This system provides
laser danger labels. Improper operation of the system and the
changes will affect the instruments warranty. Operation not
mentionedin the user manual shall be allowed by our company.5.1
Error DetectionThis equipment equips self-detecting device. System
is continuously monitored by password lock, circuit breaker. LCD
shows error information and system stops; The system will make
sound tone which lasts longerUnder this situation, you shall turn
off the equipment and restart the equipment. If error still exists,
refer to Chapter7---Troubleshooting---More notes.5.2 Preparation
Before Operation1. Connect the power line;2. Make electricity show
ON;3. Insert key and release emergency switch;4. Connect handpiece
with equipment;5. Connect footswitch with service panel;6. Make
sure that all the persons in the clinic room wear suitable safe
glasses.5.3 System OperationBefore operating this equipment, you
shall:1. Start equipment (Refer to 5.3.1)3. Enter languages
selecting interface (Refer to 5.3.2)4. Enter mode selecting
interface (Refer to 5.3.4)Caution!1. Before laser emitting, make
sure that all the persons are well protected from laser or
reflected.2. To protect eyes from injury and discomfort, make sure
that all the persons in the clinic room wear glassesrecommended by
our company.3. Even though wear suitable safe glasses,you cannot
look laser in the eyes or through reflective objects.4. Never emit
laser without touch skin. Laser only emits to skin to be treated
with.5.3.1 Start System1. Make sure that emergency switch is
released (release it by clockwise turning);2. Make anticreeping
switch show ON3. Turn key switch 90 degrees4. Screen shows 0%
Loading. At the same time, system make self-test. If self-test
success, screen shows100% Loading.CHARMINGLASER 19. 5.3.2 Selecting
LanguagesThe system X6 provides 3 modes of languages for option:
English, Spanish and Chinese.5.3.3 Selecting Working ModesThe
system X6 provides 3 working modes for option: HR, SHR and SR.Click
the working mode you want and go into related mode parameter
selection interface. E.G. clickgo into HR working mode
interface.5.3.4 Introduction ofHR Working Mode5.3.4.1 Interface
ofHR working modeCHARMINGLASER 20. Click and interface will go into
the HR parameter setting interface.Note: "SKIN TYPE" is default
skin type 1 when login the interface.5.3.4.2 Skin type selectionYou
can select skin type I-VI from "SKIN TYPE"table here:Each skin type
has relative default parameters.Energy decreases from skin type I
to skin type VI.Skin Type Frequency Energy level Energy level scope
level 1.0 27 1-120 Default level 1.0 25 1-100 Default level 1.0 23
1-80 Default level 1.0 21 1-60 Default level 1.0 19 1-40 Default
level 1.0 17 1-20 Default level5.3.4.3 Parameter adjustmentAt
"FLUENCY J/cm2)" area, click and to decrease and increase energy
output.At "FREQUENCY(Hz)" area,click and to decrease and increase
laser pulse frequency.CHARMINGLASER 21. Note: on HR mode,
FREQUENCYcan be 0.5Hz, 1Hz, 2Hz,3Hz, 4Hz, 5Hz.We suggest that you
use lower frequency first and use higher one when you are familiar
with this laser X6.Click "READY" to get laser X6 prepared for
treatmentClick "STANDBY" to logout ready status.Click to get back
to working mode selection interface.5.3.5 SHR Working Mode5.3.5.1
Interface ofSHR working modeClick and interface will go into the HR
parameter setting interface.Note: Energy of FLUENCYis default
10J/cm2.5.3.5.2 Parameter adjustmentAt "FLUENCY J/cm2)" area,click
and to decrease and increase energy output.Note: At SHR working
mode,the laser output frequency has default 10Hz.CHARMINGLASER 22.
Click "READY" to get laser X6 prepared for treatmentClick "STANDBY"
to logout ready status.Click to get back to working mode selection
interface.5.3.6 SR Working Mode5.3.6.1 Interface ofSR working
modeClick and interface will go into the HR parameter setting
interface.5.3.6.2 Parameter adjustmentAt "FLUENCY" area,click and
to decrease and increase energy output.At "FREQUENCY(Hz)"
area,click and to decrease and increase laser pulse
frequency.CHARMINGLASER 23. Click "READY" to get laser X6 prepared
for treatmentClick "STANDBY" to logout ready status.Click to get
back to working mode selection interface.5.4 Emitting
LaserCaution!When system is at Ready status, the indicator light on
handle will light on (RED).When system is at Ready status, laser
emits once pressing footswitch and handpiece switch at the same
time.Note!When system is at Ready status, you are not able to
adjust parameters; if you want to adjust parameters, please goback
to Standby status.1. If cooling system isnt blue, must not begin
treatment;2. Make sure that tip has aimed at skin where should be
treated with before press footswitch;3. After pressing footswitch,
press handpiece switch. Only when the two switches are pressed down
at the sametime, the laser can emit;4. Total pulse number used will
show5. Release handpiece switch or footswitch, laser will stops
emitting.Note!If you press handpiece switch or footswitch only by
accidence,laser will not emit.5.5 Detection System in X65.5.1
System TestAlarmWhen system find system error during treatment or
standby mode, system will note System Error.Click can login the
detection interface.Cooling system indicator lightCHARMINGLASER 24.
5.5.2 Routine Test ParameterState: This interface is the
self-detection interface of diode laser system X6. It will
real-time monitoring water flow,water temperature and crystal
temperature, etc. In this interface, when all numbers in
"Electricity" and " SU" showsin green means all is in normal
station. If any of the numbers shows in red, it means that part is
abnormal andsystem cannot go on working.Detection Parameter
Table:Detection ParameterSymbolIdentity ofSign Status DisplayI1
Hall sensor collecting circut Number displayI2 Power current output
Number displayI3 Power current output Number displayV1 Power
voltage output Number displayV2 Power irradiation/ non-irradiation
Ok or NGK1 Power dead-stop/ normal Ok or NGD1 Power launch/
non-launch Ok or NGNOTICE:1. "OK" means the working is in normal
status;2. "NG" means the working is in abnormal status;3. "Number
display" refers to the value of real-time detection, "Number in
green" means the working is normal,"Number in red" means the
working in abnormal.5.6 System Shut Off1. Go back to Standby
mode;2. Turn off system by turning key switch counterclockwise 90
degrees;3. Turn OFF the Electricity breaker;4. Unplug power
supply;D2 Power overpressure/ normal Ok or NGQ1 Power shortcircuit
/ normal Ok or NGJ1 Power open circuit / normal Ok or NGX1 Power
overcurrent/ normal Ok or NGW1 Water inlet current of laser
generator Number displayW2 Water outlet current of laser generator
Number displayT1 Inlet water temperature of laser generator Number
displayT2 Outlet water temperature of laser generator Number
displayW3 Water line lower limit directive Ok or NGT3 Temperature
of crystal Number displayWX1 Detection of inlet water current
circuit of laser generator Number displayWX2 Detection of outlet
water current circuit of laser generator Number displayTX1
Detection of inlet water temperature circuit of laser generator
Number displayTX2 Detection outlet water temperature circuit of
laser generator Number displayTX3 Detection of crystal temperature
circuit Number displayX3 Detection of crystal temperature circuit
Number displayCHARMINGLASER 25. 5. Clean handpiece (refer to
Chapter 6)6. Put handpiece on handpiece rack.Note!You can press
down the emergency switch to shut off the system if necessary and
can release it when problemsolved.Never leave key switch in the
system to avoid unauthorized person using equipment.Chapter 6
System MaintenanceNormal maintenance can be carried out by
non-authorized technical person unless it is specially stated.For
health, please keep equipment and handpiece clean after each
treatment.Caution!Please maintain equipment after turning off
equipment and unplugging power supply or it may harm person
andequipment.6.1 Regular MaintenanceRegular maintenance ensures
best working condition.Authorized technical persons should check by
following operations every 6 months: Total system test. Inner
test,including cleaning accumulated dust. Use energy meter to check
laser output power. Cooling system:1. Test water level; If
needed,add deionized water2. Change ion filter;3. Clean water
tank4. Check the seal ring of ion filter connectorCaution!Systems
inner part shall be tested by professional technical person
only!6.2 Service InformationMatters of this system are relative to
serial number on the rear panel. It is necessary when we are doing
after-salesservice for you.Caution!Unmentioned, unauthorized
maintenance and modify can make radiation to operator.Unsuitable
using and adjusting this system may lead to warranty agreement
invalid.6.3 Normal MaintenanceThe below maintenance process should
be finished by operator.Caution!CHARMINGLASER 26. System causes
high voltage and laser radiation after connecting with power. So
before maintenance, please turn offequipment and unplug power
cable.Maintenance insides the machine should be processed by
technical persons.6.3.1 Clean and DisinfectionUse cotton with 70%
alcohol to clean system cover.6.3.2 Clean HandpieceCheck handpiece
everyday, including test its integrity and its crystal. If
handpiece cannot clean easily, please usewet cotton.Use cotton with
70% alcohol to clean crystal after treating with each
customer.6.3.3 Change FilterCooling system has deionized water and
this will prolong laser lamp lifetime. To ensure water quality,
coolingsystem is installed ion filter.Change filter once a year at
least (we suggest you change it each 6 months) and the procedure
can be finished byoperator.Changing Ion Filter Procedure:Take out
:1. Release water form system.2. Open cover of system on right side
and you can see the ion filter.2. Press the connecting keys (A and
B) to make ion filter leave them.3. Lightly pull the ion filter
form the clip.4. Throw away the used ion filter.Installation1.
PressAand B;2. Connect ion filter connector with Aand B;3. Make ion
filter go through the clip;4. Close the cover.5. Add water
again,make system run for 5 minutes and then you can operate
it.CHARMINGLASER 27. Chapter 7 TroubleshootingX6 diode laser system
has self-test software and it will monitor system operation.When it
finds error, LCD screen will show error information.The error will
stop the system but operator has to turn off system by key switch
and power switch.If situation unmentioned in this chapter happens,
it should be handled by technical person. Please contact us first.
Dont try to disassemble or open systems cover if not authorized.7.1
WarrantySystem warranty is one year.Unsuitable using and adjusting
this system may lead to warranty agreement invalid.7.2
TroubleshootingThe below table shows the proper error message/alarm
information, reasons and solutions. If this form cant helpsolve
problem, pls contact with us.Error Message/Alarm Reasons
SolutionsOut of order System trouble. Restart / contact with
us.Error nothing Test system has trouble. Restart / contact with
us.Key-stroke of handle failure Handle does not well-connected.Turn
off the system, re-connect the handleand restart the system.Foot
switch failure Foot switch is not well-connected.Re-install the
foot switch and restart thesystem.Water current alarm (W1, W2)There
is no water inside the machine;Water current sensor has wrong
detection;Water pump is not working.Fill water into system
fully;Restart system after 1 minutes waiting.3. If problem not
solved, please contact us.Water temperature (T1,T2)Too high water
temperature;Temperature sensor has wrong detection.Restart system
after 5 minutes waiting;If problem not solved, please contact us.No
display after key switch on.Emergency switch is locked up;Power
switch on back of system is lockedup;No power supply;Screen has no
display.Restart system by clockwise rotatingemergency switch;Uplift
power switch;Check if there is power supply and ifpower plug is
well-connected;If problem not solved, please contact us.No cooling
when laser isworking.Not enough time for cooling;Hardware
failure.Wait for 1-2 minutes;If problem not solved, please contact
us.Laser does not come out whenpressing foot switch
andhandle.System is in standby status;Foot switch does not service
panel;Foot switch faulty.Switch over to Ready mode;Check the
connection of foot switch;Change a new foot switch.Crystal
temperature alarm (T3)Too much temperature on crystal;Temperature
sensor has wrong detection.Wait for 5 minutes after turning off
system;If problem not solved, please contact us.Water line alarm
(W3)No water in water tank or there is noenough water there;Sensor
has faulty detection.W3 showing red means water line lowerlimit,
please add water;If problem not solved, please contact us.Laser
power alarm (K1) Too much power output. Go to the alarm interface
and press ResetCHARMINGLASER 28. Laser power has problem. to
restart system;Reinstall the handle and restart the system;If
problem not solved, please contact us.No display on screen.Wrong
signal between screen and maincontrol panel;Signal line is not
well-connected.1. Check if the screencorrectly install and restart
the system;If problem not solved, please contact us.CHARMINGLASER
29. Chapter 8 Clinical Guide8.1 IntroductionThis part can provide
help to professional person who operates laser diode system. This
chapter descripts how touse this equipment, how to prevent danger
and warning information. Please read the chapter 1-7 before reading
thischapter.8.2 Applications and Indications1. The laser diode
system can be used for hair removal on body and face. It can
achieve hair reduction permanently.The system is expected to be
used for all skin types.2. The hair removal process is based on
selective photothermolysis principle. This method is to destroy
hairregeneration. It rises hair follicle temperature high enough to
destroy hair generation cells, but it will not damagethe epidermis
and surrounding tissue.3. The unique cooling technology make laser
shoot to hair roots, at the same time, the cooling protects the
skin andsurrounding tissue, improves patients comfort.4. Diode with
810nm wavelength is suitable for removing excess hair. The effect
is stable, long or permanentreduction.8.3
ContraindicationsCancer,especially skin cancerPregnancyUse
photosensitive drugs and traditional Chinese medicineDisease easy
activated by 810nm wavelengthSun exposure or tanning 3~4 weeks
before treatmentSkin to be treated with has inflammationScar tumor
historyDiabetes (dependent on insulin injections)Sensitive
skinEndocrine disorders (light irritation)Use
anticoagulantEpilepsyBlood coagulation history8.4 Side-Effect after
TreatmentDiode system is similar to other laser technical products.
Normally it can cause controllable or uncontrollableinjury to
tissue:Erythema and edema may happen and l last for severalweeks in
2-24 hours after treatment;In 48 hours after treatment, patient may
feel allergic, itching, mild burning sensation or pain symptoms
ontreated skin;After treatment, there may appear blisters, skin
necrosis or surrounding skin ppears pigmentation. They exists
forseveraldays or severalweeks and they may obvious;Eyes may get
injured if people in room do not wear glasses;It is very important
to observe the reaction of skin during the treatment. Improper
usage or energy is too highCHARMINGLASER 30. may cause injury and
other effects.8.5 Other Possible Effect during TreatmentDiscomfort
--- During laser emission, some patient feel discomfort; Some feel
like bitted, others feel likeflagellated lightly or burning
sensation lasts for one hour after treatment. Most patient can
tolerance the treatmentand some patients need anesthesia before
treatment;Skin texture damage --- In some cases,the patients
blister who may need to do routine wound protection;Pigmentation
change --- Pigmentation of treated skin may change. IV and VI skin
types may appearpigmentation or pigmentation reduction, and this
may happen to patients who has exposed to sun one week beforeor
after treatment. Some patients may cause pigmentation even if he
does not expose in sun. These pigmentationsdisappear gradually in 3
to 6 months. Only in rare cases,pigmentation will leave;Scarring
--- Scarring is very rare, such as proliferative hypertrophic scars
or keloids. Compliance with this clinicguide before and after
treatment can be effective in reducing the scarring
possibility.Excessive edema --- After treatment, nose and cheeks
appear temporary edema. Usually edema disappears inseveralhours or
lasts for severaldays;Fragile skin --- Treated skin and surrounding
skin becomes fragile after treatment. If this happens, dont make
upand do massage right after treatment.Bruises --- After treatment,
purple bruising may appears and lasts for several days. When
bruises disappear, theskin turns red and the color disappears in 3
months.8.6 Eye ProtectionIt is very important for all persons in
the clinic room to wear safe glasses;Eyes optical density is 5
(OD>5);The patient has to close eyes during treatment, even if
he wears safe glasses;If patient could not wear glasses,he can use
eye patch to completely prevent glare into eyes;If treated skin is
very close to eyes or eyelids, use cornealboard to protect eyes.8.7
Vision SafetyAvoid glare into eyes;Eye shall not straight on
emitted laser or reflecting surface,even if it wears safe
glasses;While operating pause,the system is set to standby mode to
prevent laser emission with negligence;Only when the light aims at
skin to be treated,you press footswitch and handpiece switch.8.8
Fire SafetyThe hair of treatment part shall be removed. If it is
necessary, place disinfectant soaked gauze near the
treatmentarea;Ensure that you can get fire extinguishers at any
time;Avoid using combustible paper products or ensure that they
have been volatile before laser/optical radiation;This equipment is
not suitable for use in the presence of combustible or
anesthetic;The oxygen pipe has to be laser safe.8.9 Application
ModeEach application mode contains predefined pulse parameters: the
mixed-mode rate, warm-up pulse segment andtotal pulse width of
treated pulse segment;Mixed-mode --- Energy is transported with
pulse processing method which is controlled by proprietary
software.During treatment, warm-up pulses and therapeutic pulses
are mixed by this method to become the optimal pulse forthe skin
type.CHARMINGLASER 31. Pulse width --- Each pulse duration (from
warm-up to treatment segment) is in milliseconds. The operator set
thesystem pulse width according to pulse type key via software
control.8.10 Energy DensityIn each treatment, the operator set the
energy density output (joules/cm2). Energy density is: total energy
(joules) ofselected pulse type/ spot size (cm2).Scattering of a
large spot (12mm*12mm) is minimal. So the result is sustained
energy output and deeperpenetration; the greater the energy
density, the higher temperature of target hair tissue, surrounding
tissue andepidermis.8.11 Before TreatmentThe parameters are
depended on skin type, hair color, hair type, hair intensity, etc.
Once treatment parameters arechosen, you should shave hair, clean
treated skin and remove all hair and scrap that may affect
treatment.8.12 Cooling TechnologyThe cooling technique reduces the
initial skin temperature to protect it before, during and after
treatment. It canreduce discomfort and increase energy to maximum
without increasing adverse effects.Dense hair (30-40 hairs /cm2 )
produces higher temperature because each cm2 has more melanin.
Surroundingtissue will produce excessive heat and hurt tissue and
so the more bushy, use lower energy.8.13 Take PhotoWe recommend
taking photos before and after treatment to record treatment
results.8.14 Surface AnesthesiaThe system incorporates a unique
mixed-mode and dual cooling technology. Patients can still use
anesthetic (suchas EMLA) to avoid any feeling. The anesthetic is
usually coated in the preoperative period of time (1 hour).Remove
all narcotic residue before treatment.8.15 Explanation before
Treatment8.15.1. PrefaceConsult physician for the first time: Bring
detailed medical record, including previous treatment method and
check whether the skin is appropriateto accept the system
treatment; The patient who accepts prolonged sun exposure or
artificial sunbathing within 48 hours before treatmentcannot do
treatment; Patient who will accept prolonged exposure to sunlight
cannot do treatment; If skin to be treated has herpes simplex
history, the patient needs preventive drug treatment before
treatment; Identify patients; Discuss with patient about treatment
goals.8.15.2. Consolation ServiceThe physician shall tell patient
following at the first consolation:Understand why the patient seek
treatment and his or her expectations.Discuss with patient about
:CHARMINGLASER 32. Laser treatment needs multiple treatments and a
few months time;It may cause some discomfort or pain during
treatment;It may cause temporary erythema and edema after
treatment;Skin gradual recovery may last for severalmonths;Have a
very small possibility of adverse effects,such as skin color
changing is usually temporary.8.15.3. Skin TestEnergy is the key
for best treatment effect and minimal adverse effects. Usually
patient should make a skin testwith following parameters before
treatment:Fitzpatrickl-VISkin typeHair type Treatment times (Scope)
Energy AreaI Thick 6 10 12*12Thin 9II Thick 6 10 12*12Thin 9III
Thick 6 10 12*12Thin 9IV Thick 6 9 12*12Thin 8V Thick 6 8 12*12Thin
7VI Thick 6 8 12*12Thin 7Advice: wait for 30 minutes for I-III
skin, wait for 45 minutes for IV-VI skin and see skin reaction.8.16
TreatmentStart after selecting treatment
parameters.Caution!Extensive heat transmission may hurt skin and
cause skin hypertrophy, atrophy or abnormal pigment and
othersymptoms.1. Ensure that the patient comfortably lie on the
operating table and wear goggles.; All personnel have to wear
safeglasses. Operator can easily touch treated area.2. Clean
perfume, make-up residue and sunscreen of skin.3. Check the
handpiece and make sure it is cold.4. Select appropriate settings
and save selected parameters. The operator can treat with patient
who has the samesituation, using the same parameters.5. Make
handpiece perpendicular to skin and touch skin; Gently press the
end of handpiece on skin to make fulltouch.6. After starting
treatment,check skin at any time to observe its response.7.
Carefully diagnostic test results.8. If get desired effect,continue
treatment with the same parameters.9. Press footswitch and
handpiece switch to start treatment.CHARMINGLASER 33. 10. From time
to time to view the color and hair follicle morphology of treated
skin (erythema and edema). You canalso smell hair burning even if
parameters set is appropriate.11. If adverse effect (such as
excessive redness) happens before good response of hair follicle,
please reduce energyto reduce hurt. Reduce damage by decreasing
5-10% energy or adjust pulse type to a larger value.12. If skin has
no adverse reaction or morphological changes,you increase energy
5-10% to get expected effect.13. Cool skin right after
treatment.Caution!Laser can lead to serious eye damage or
blindness. In order to improve safety, the patients need to wear
gogglesduring facial treatment.NoteDo not treat with hair whose
color is lighter than surrounding skin.8.17 Treatment ParametersThe
parameter reference setting is based on the user experience. In
addition, users can select and set parametersbased on real
practice. Treatment parameters includes skin type, hair density,
laser energy density and repetitionrate.Note: the average treatment
area is 12mm*12mm. You can adjust treatment times based on the real
treatment area.8.18 Post-Operative CareAfter treatment, put cool
(not frozen) water bag/towel on treated skin to reduce edema and
discomfort. You can alsouse cooled & soaked gauze.Pay attention
to prevention of injury in 4 hours to 5 days after treatment and
avoid hot bath, aerobics and massage. Sun exposure --- Patients
need to smear a high index of sunscreen (the SPF>30) and avoid
direct sunlight in amonth after treatment. Postoperative exposure
can cause pigment regeneration, resulting in pigmentation. Make-up
--- make up can be applicable in daytime. During this period, skin
is sensitive. Avoid hurting skin orget infection when removing
make-up.Fitzpatrickl-VISkin type Hair typeTreatment times
(Scope)EnergyEnergyIThick8 (6-10)10Thin 9IIThick8 (6-10)10Thin
9IIIThick8 (6-10)10Thin 9IVThick8 (6-10)9Thin 8VThick8 (6-10)8Thin
7VIThick8 (6-10)8Thin 7CHARMINGLASER 34. Other advice --- Patient
shall avoid strenuous exercise or similar activities within a few
days untilrecover completely.8.19 Follow-upThe following is
follow-up suggestions and the patient can test his own situation
according to these: Usually, the patient can accept more treatments
in 6-8 weeks after treatment. The time is different according
todifferent treatment result and hair growth cycle. If no need for
more treatments, patient shall accept checking again in 3-4 months
after treatment or patientshall accept checking when hair growth in
treated area. If parts of hair is removed, patient shall accept
checking again in 6-8 weeks after treatment. If you observe no
changing, change treatment parameters, do more treatments, adjust
interval time to let newhair grow in different parts (growth cycle)
and different individuals (sex, hormones). Recommend patients to
avoid sunlight during treatment process.8.20 Finish TreatmentThe
professional person judge when finish treatment or decide according
to patient satisfaction of treatment goal.CHARMINGLASER
