PRODUCT :

‘STC’ Brand Brake Lining is a flexible, solid woven asbestos based friction material reinforced with Brass wire for better strength and impregnated with resine. Due to its flexible nature, it can be cut into segments, cones and special shapes to enable the material in fitting to various forms. It may be heated uniformly at a moderate temperature to soften the impregnates to make the forming more easier. It should be used strictly under dry condition. APPLICATION: ‘STC’ Brand Brake Lining is suitable for various break and clutch components and are used in cranes, lifts, winches,mining, winding machines, haulages, road rollers, sugar mill centrifuges, concrete mixers, excavators etc.

TECHNICAL DATA

Cross Breaking Strength - 2.52 X 10^5 Hardness: Rockwell - 44-45

Shore - 75-78 Heat Swell - 0.34,

Water Swell - 0.26 Acetone Extract - 6.99

Specific Gravity - 1.4930 Loss of weight on ignition - 44.27

Co-efficient of Friction depends on the severity of application and maximum operating temperature.

Operating Temperature: Max. Temp. 260C Max. Continuous temp. 125C

Ranges: Length 15 m,

Thickness 4.8mm (3/16”) to 19.1 mm (3/4”) Width 25.4mm (1”) to 635mm (25”).

STC BRAKE LINER