Kingcham Matting Agent Interior Matting Agent

Interior Matting Agent M-20

Appearance: Ivory or pale yellow powder

Bulk density: 450-550 g/l

Non volatile: 99%

Typical properties

Acrylic resin and catalyst

Composition

Application

1. M-20 is suitable for above 3%(60°) of gloss in polyester epoxy hybrid powder coatings.

2. Wax-free type. The recoatability and transfer-image properties of coatings are not influenced.

3. Compared with 68 series matting hardener, M-20 has better anti-yellowing and scratch resistance properties.

4. Good gloss stability after twice extruded.

5. M-20 can adopt toaster or cold furnace to bake due to small sensitivity of furnace temperature.

6. Chemical matting agent, good storage stability. It reacts with epoxy as 1:2.3.

7. M-20 is suitable for almost 50/50 or 60/40 type hybrid polyester resins without remarkable selectivity.

8. Heavy metal contents of this product conforms to the EU RoHS standard.

Usage method & level

Premix M-20 with other material and co-extrude. The dosage is 1-5% by total weight of formulation.The more of the dosage, the lower for the gloss.

Suggested formulation

Material Formula 1 Formula 2 Formula 3

Polyester（50/50） 208

Polyester（50/50） 208

Polyester（60/40） 249

Formula 4

Polyester（60/40） 249

Epoxy（E - 12） 322 322 281 281

Wetting Promote Agent 10 10 10 10

Leveling Agent 10 10 10 10

Benzoin 3 3 3 3

Extinction Barium Sulfate 391 197 391 197

TiO2 200 200

Carbon Black MA-100 6 6

Matting Agent M-20 50 50 50 50

Total 1000 1000 1000 1000

Extrusion Condition Zone I 95℃,Zone II 110℃

Baking Condition 200℃/12min or 190℃/15min

Gloss%(60°) 3.5% 6.1% 4.5% 6.5%

Appearance Full,flat and smooth

Impact(kg.cm) +/-50 +/-50 +/-50 +/-50

Instruction:

1. Slight overdose in the formulation will

contribute to improving flow and matting

performance.

2. Obtain better matting performance by

adding matting filler.

3. Add moderate curing catalysts in the

formulation to improve the impact

properties, which may lead to gloss and

flow fluctuation.

Package & storage

Available in polyethylene-lined kraft paper bag, N.W. 25 kg per bag.

Keep package closed after using. Keep in cool and dry place, far away from heat and fire. Avoid direct sunlight.

The shelf life is at least 12 months.

8

Kingcham Matting Agent Interior Matting Agent

Interior Matting Agent M-21

Appearance: Ivory or pale yellow powder

Bulk density: 450-550 g/l

Non volatile: 99%

Typical properties

Acrylic resin and catalyst

Composition

Application

1. M-21 is suitable for above 3%(60°) of gloss in polyester epoxy hybrid powder coatings.

2. M-21 contains small amount of wax. The film has good flow property. Excellent and stable matting performance.

Good repeat extrusion property.

3. Compared with the traditional 68 matting hardener, it has better yellowing resistance and scratch resistance

properties. Lower cost.

4. Chemical matting agent with good storage stability. It reacts with epoxy as 1:2.3.

5. M-21 is suitable for almost 50/50 or 60/40 type hybrid polyester resins without remarkable selectivity.

6. Heavy metal contents of this product conforms to the EU RoHS standard.

Usage method & level

Premix M-21 with other material and co-extrude. The dosage is 1-5% by total weight of formulation.The more of the dosage, the lower for the gloss.

Suggested formulation

Material Formula 1 Formula 2 Formula 3

Polyester（50/50） 208

Polyester（50/50） 208

Polyester（60/40） 249

Formula 4

Polyester（60/40） 249

Epoxy（E - 12） 322 322 281 281

Wetting Promote Agent 10 10 10 10

Leveling Agent 10 10 10 10

Benzoin 3 3 3 3

Extinction Barium Sulfate 391 197 391 197

TiO2 200 200

Carbon Black MA-100 6 6

Matting Agent M-21 50 50 50 50

Total 1000 1000 1000 1000

Extrusion Condition Zone I 95℃,Zone II 110℃

Baking Condition 200℃/12min or 190℃/15min

Gloss%(60°) 3% 5% 3% 5%

Appearance Full,flat and smooth

Impact(kg.cm) +/-50 +/-50 +/-50 +/-50

Instruction:

1. Obtain better matting performance by

adding matting filler.

2. Add moderate curing catalysts in the

formulation to improve the impact

properties, which may lead to gloss and

flow fluctuation.

Package & storage

Available in polyethylene-lined kraft paper bag, N.W. 25 kg per bag.

Keep package closed after using. Keep in cool and dry place, far away from heat and fire. Avoid direct sunlight.

The shelf life is at least 12 months.10

Kingcham Matting Agent Interior Matting Agent

Interior Matting Agent M-30

Appearance: Ivory or pale yellow powder

Bulk density: 450-550 g/l

Non volatile: 99%

Typical properties

Acrylic resin and catalyst

Composition

Application

1. M-30 is suitable for above 10%(60°) of gloss in polyester epoxy hybrid powder coatings.

2. M-30 contains little wax, stable and good matting properties and repeat extrusion performance.

3. Chemical matting agent with good storage stability. It reacts with epoxy as 1:1.3.

4. Supply good flow and fineness surface. Good anti-yellowing and good mechanical properties.

5. M-30 is suitable for almost 50/50 or 60/40 type hybrid polyester resins without remarkable selectivity.

6. Heavy metal contents of this product conforms to the EU RoHS standard.

Usage method & level

Premix M-30 with other material and co-extrude. The dosage is 1-3% by total weight of formulation.The more of the dosage, the lower for the gloss.

Suggested formulation

Material Formula 1 Formula 2 Formula 3

Polyester（50/50） 245

Polyester（50/50） 245

Polyester（60/40） 295

Formula 4

Polyester（60/40） 295

Epoxy（E - 12） 285 285 235 235

Wetting Promote Agent 10 10 10 10

Leveling Agent 10 10 10 10

Benzoin 3 3 3 3

Extinction Barium Sulfate 411 217 411 217

TiO2 200 200

Carbon Black MA-100 6 6

Matting Agent M-30 30 30 30 30

Total 1000 1000 1000 1000

Extrusion Condition Zone I 95℃,Zone II 110℃

Baking Condition 200℃/12min or 190℃/15min

Gloss%(60°) 10% 12% 10% 12%

Appearance Full,flat and smooth

Impact(kg.cm) +/-50 +/-50 +/-50 +/-50

Instruction:

1. Obtain better matting performance by

adding matting filler.

2. Add moderate curing catalysts in the

formulation to improve the impact

properties, which may lead to gloss and

flow fluctuation.

Package & storage

Available in polyethylene-lined kraft paper bag, N.W. 25 kg per bag.

Keep package closed after using. Keep in cool and dry place, far away from heat and fire. Avoid direct sunlight.

The shelf life is at least 12 months.

12

Kingcham Matting Agent Exterior Matting Agent

Exterior Matting Agent M-60

Appearance: Ivory or pale yellow powder

Bulk density: 550-650 g/l

Non volatile: 99%

Typical properties

Acrylic resin and catalyst

Composition

Application

1. Can provide above 10%(60°) of gloss for /TGIC based exterior durable powder coatings.

2. Excellent and stable matting performance. Non-sensitive for extrusion technology.

3. The powder coatings made by M-60 has excellent storage stability, UV resistance and durability properties.

4. Supply flow, anti-yellowing and fineness surface.

5. Heavy metal contents of this product conforms to the EU RoHS standard.

polyester

excellent

Usage method & level

Premix M-60 with other material and co-extrude. The dosage is 1-4.5% by total weight of formulation.The more of the dosage, the lower for the gloss.

Suggested formulation

Material Formula 1 Formula 2 Formula 3

Shenjian SJ4ET 570

DSM P4600 570

Qinte NH3307 570

Formula 4

CSE EL6600A 570

Zhengjie ZJ9030

Wetting Promote Agent 10 10 10 10

Leveling Agent 10 10 10 10

Benzoin 3 3 3 3

Extinction Barium Sulfate 309 309 309 309

Carbon Black MA-100 8 8

Matting Agent M-60 45 45 45 45

Total 1000 1000 1000 1000

Extrusion Condition Zone I 95℃,Zone II 110℃

Baking Condition 200℃/12min or 190℃/15min

Gloss%(60°) 13.5% 13% 12% 10%

Appearance Full,flat and smooth

Impact(kg.cm) +/-50 +/-50 +/-50 +/-50

Instruction:

1. Ca. 0.05 parts of excess TGIC per weight

part of M-60 based on their chemical

equivalent weights.

2. It should be better to use slow-curing

polyester, or match slow-curing

polyester with fast-curing polyester

to use.

Package & storage

Available in polyethylene-lined kraft paper bag, N.W. 25 kg per bag.

Keep package closed after using. Keep in cool and dry place, far away from heat and fire. Avoid direct sunlight.

The shelf life is at least 12 months.

14

Formula 5

570

Niutang TGIC 45 454545 45

10

10

3

309

8 8 8

45

1000

9%

+/-50

Kingcham Matting Agent Exterior Matting Agent

Exterior Matting Agent M-70

Appearance: Ivory or pale yellow powder

Bulk density: 550-650 g/l

Non volatile: 99%

Typical properties

Acrylic resin and catalyst

Composition

Application

1. Used in polyester/TGIC based exterior durable powder coatings.

2. Dosage of M-70 is about 5.5% by total weight of formulation and the lowest gloss of 5%(60°) can be reached.

better than polyester/GMA system

3. Excellent scratch resistance of the coating film surface, the impact is +/-50 kg.cm.

( than /GMA system)

4. Stable matting performance. Non-sensitive for extrusion technology.

5. Supply flow and UV resistance. Excellent durability property.

6. Heavy metal contents of this product conforms to the EU RoHS standard.

(Far )

Far better polyester

(Far better than polyester/GMA system)

excellent

Usage method & level

Premix M-70 with other material and co-extrusde. The dosage is 1-5.5% by total weight of formulation.The more of the dosage, the lower for the gloss.

Suggested formulation

Material Formula 1 Formula 2 Formula 3

Shenjian SJ4ET 570

DSM P4600 570

Qinte NH3307 570

Formula 4

CSE EL6600A 570

Sanli SL9028

Wetting Promote Agent 10 10 10 10

Leveling Agent 10 10 10 10

Benzoin 3 3 3 3

Extinction Barium Sulfate 299 299 299 299

Carbon Black MA-100 8 8

Matting Agent M-70 55 55 55 55

Total 1000 1000 1000 1000

Extrusion Condition Zone I 95℃,Zone II 110℃

Baking Condition 200℃/12min or 190℃/15min

Gloss%(60°) 6% 4% 5% 6%

Appearance Full,flat and smooth

Impact(kg.cm) +/-50 +/-50 +/-50 +/-50

Instruction:

1. Ca. 0.05 parts of TGIC per weight

part of M-70 based on their chemical

equivalent weights.

2. It should be better to use slow-curing

polyester, or match slow-curing

polyester with fast-curing polyester

to use.

excess

Package & storage

Available in polyethylene-lined kraft paper bag, N.W. 25 kg per bag.

Keep package closed after using. Keep in cool and dry place, far away from heat and fire. Avoid direct sunlight.

The shelf life is at least 12 months.

16

Formula 5

570

Niutang TGIC 45 454545 45

10

10

3

299

8 8 8

55

1000

6%

+/-50