s6655d29104a9ffb6.jimcontent.com... - DOC 1799 Welding Helmets sperian protection europe (sas) Immeuble Edison - Paris Nord 2 33, rue des Vanesses BP 55288 Villepinte 95958 Roissy

www.sperian.com

Welding Helmets- DO

C 17

99

sperian protection europe (sas)Immeuble Edison - Paris Nord 233, rue des Vanesses BP 55288 Villepinte95958 Roissy CDG Cedex - FranceTel. +33 (0)1 49 90 79 79Fax +33 (0)1 49 90 71 [email protected]

sperian protection (uK) limitedUnit 3 Elmwood Chineham Park Basingstoke RG24 8WG United Kingdom Tel. +01256 693200 Fax +01256 693300 [email protected]

sperian Welding protection ag

Industriestrasse 2

CH-9630 Wattwil, Switzerland

Tel.+41 (0)71 987 42 00

Fax + 41 (0)71 987 42 99

[email protected]

> > > Welding protection

table of CoNteNtS

i - Why welders need a protection •Normsandcertifications

ii - Welding helmets in a few words •Componentsofaweldinghelmet

•Additionalfeaturesofdifferenttypesofweldinghelmets

iii - the right protection for every welderiV - application guideV - expert line •Comfort&performance

•Optrele680

•Optrele670

•Optrele650

•Optrele640

•OptrelPAPrExpert

•Optrele1100

•Optrele2100

•OptrelsparepartsforExpertrange

Vi - professional line •Easyhandling&improvedefficiency

•Optrelp550

•Optrelp530

•Optrelp505

•Optrelp500sidecovers

•OptrelsparepartforProfessionnalrange

Vii - Basic line •Optrelb100-series

•Optrelb200,b400&b500-series

•Optrelb300,b600-series

•Optrelupgradecartridges&forBasicrange

2

3

4

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

21

22

23

24

25

26

27

28

The specialisT in proTecTion and safeTy

sperian protectionThe Sperian Protection Group - formerly Bacou-Dalloz - specializes in the design, production and sale of personal protective equipment. The Sperian Protection Group is represented on all five continents with a 6,000-strong worldwide workforce and utilizes its technological leadership to continuously develop comprehensive innovative solutions for the protection of people in the workplace.

sperian Welding protection agSPERIAN Welding Protection AG - formerly Optrel AG - is a Sperian Protection Company that specializes in the design and manufacturing of welding helmets. SPERIAN Welding Protection AG has an extensive product portfolio with both active and passive ranges available in order to meet the needs of all welders across the globe.

Innovation reliability, quality and an absolute focus on safety are the core pillars of the corporate philosophy, which all employees consistently apply.

Protection, in combination with the correct welding helmet for the welders needs is essential in ensuring the health and safety of welders.

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>in

tro

du

ctio

neX

per

tp

ro

Fess

ion

al

Ba

sic

>>>

1

1. 2. 2. 3. 4. 5.

Despite all the risks, the welder should feel safe carrying out his tasks and, above all, be able to do his demanding job without having to concentrate on other things. Thanks to state-of-the-art technology and research, Sperian Protection is able to protect the welder perfectly and reliably - from head to toe - without restricting his freedom of movement.

1. The ce-certification is obligatory for manufacturer of eye protection equipment and active and passive welding helmets, selling in Europe. This certificate confirms, that all mandatory minimum specification, set by law (guideline 89/686/EWG) are fulfilled.

Certificates referred to as “eg - Baumusterbescheinigung” allow a manufacturer to put the CE-mark on the product to show the customer that the above guidelines are fulfilled. After a one time test, this certificate can be used for an unlimited time.

2. The signs “din - geprüft” and “din - geprüfte sicherheit” or “ECS geprüft” and “ECS geprüfte Sicherheit” confirm the accordance of the product with the DIN-standards. By having this certificate, manufacturers can state, that the product corresponds with the DIN-norms. The quality management, the measurement equipment and the product itselfs of all manufacturers explaining their products as either “DIN - geprüfte Sicherheit” or “DIN - geprüft” will - in contrast to the CE-certification - be tested and monitored periodically. Like this, a constant and high quality level is guaranteed to the costumer. To be able to mark the products with one of those signs, a certification stated as “Prüfbescheid” is needed.

For sales activities outside of Europe, SPERIAN Welding Protection AG is testing their products at least for the following Standards:

3. canadian standard association (csa): This certificates and norms are comparable with the DIN-certificates. The factory is also monitored regularly by a quarterly factory audit.

4. australian / new Zealand standard (as/nZs): The certification body in Australia acts similar as the DIN certification body. This certificate stands more or less for the DIN-sign in Australia. After getting the certificate, a yearly audit is conducted by the Australian certification authority, SAI Global.

5. american national standards institute (ansi): The ANSI certification can be done by the manufacturer as long as he can guarantee that the product meets or exceeds the required values.

Choosing the correct Welding Safety Product is essential. If the product is not compatible with the welding process, it can result in dissatisfaction or may even result as a health hazard for the welder. This catalogue is designed to help you make the initial selection of your product.

Wearing a welding helmet or using a handshield can reduce the risk to eyes and face to a minimum. However, when you purchase a product, you should check the certification mark and ensure that you choose the correct product. An inadvertent danger can only be avoided with certainty if quality and continuity are taken into consideration. The various certification marks provide information about an initial and periodic check of the product for safety.

WHY WELDERS NEED A PROTECTION

ears Ears require particular protection against UV-&IR-radiation due to their thin skin covering. In addition, ear protection products should be worn for certain welding procedures. With TIG welding, for example, approximately 120 dBi are generated, which can lead to irritation and irreversible damage. The Howard Leight range provides suitable ear protection products.

eYes Bright, intensive light automatically triggers the body‘s natural defence mechanism: the eyes are covered by the eyelid. Because this mechanism is obstructive during welding and without, it can lead to tired and red eyes, the intensity of the welding arc must be lessened. In welding protection products, this function is taken on by liquid crystals or dark glass. The required view on the weld object is maintained, but the intensity is diminished.Another great risk is presented by UV-&IR-radiation. The fact that the radiation cannot be detected by the naked eye lures many welders into a false sense of security. Due to its intensity, even the briefest moment of exposure is enough to irritate the eyes and to seriously damage them in the long term. To be sure that the eyes are protected, a UV-&IR- filter that reliably and permanently reflects the radiation is required. In all SPERIAN Welding Protection products, great importance is attached to the permanent filtration of this radiation.

respira-torY

tracts

Depending on the welding process and material, fine particles, smoke or poisonous vapours and gases may be released. In the short term, these substances usually lead to headaches, nausea and coughing. Without you noticing it, these can then result in serious illness and long-term damage. An analysis of the materials used and the welding processes in the working environment concerned should help you to find the right protection.Air fed filter units with particle filters and / or gas filter systems depending on the need can be used to minimise the risks of respiratory problems.

sKin& BodY

Burns and injuries caused by flying hot particles, some of which are black and look harmless account for 70% of the most commonly caused accidents among welders, according to the aforementioned study by the American Bureau of Labour. UV-&IR-radiation also cause dangerous burns which can eventually result in skin cancer. Just a few minutes of exposure are enough to cause skin irritation and for this reason, SPERIAN Welding Protection AG pays particular attention to the adequate protection of the entire head and offers various accessories for the protection of the neck, chest and back of the head, while Sperian Body Protection specialises in protection of the entire body.

Hands& Feet

Welding generates hot particles and flux chippings which will cause burns to exposed parts of the body even though these particles are black in colour, they are still hot enough to cause skin burns. In some working environments the welder may need to be protected from falling parts whilst adequate foot and hand protection is normally seen as essential to the welders safety. Sperian Protection provides also a complete range of suitable and confortable gloves and shoes.

EYESEARSRESPIRATORY TRACTSSKIN & BODY

HANDS & FEET

Purchasing and wearing protective products is seen as a necessary evil bymostwelders.Thereforewearing thecorrect safetyequipment isessential.Welders are subjected tovarious visible and invisiblerisks. The American Bureauof Labour estimates thatthere are 365,000 weldingaccidents per year in theUSA.Itisveryeasytoprotectyourself against these risks,so long as you know whattheyare:

Your Sperian consultant within this range will be happy to provide you with the current catalogues for other protection products and to advise you accordingly within this range.

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

2

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

3

AdditionAl feAtures of different types of welding helmets

Sensor bar / slideThe sensor bar is used in conjunction with the sensors. The sensor bar helps to maximize or minimize the sensors angle of arc detection. It is important to be able to adjust the detection angle according to the welding application and environment. With the sensor bar you can reduce the detection angle from 120° to 60°. Limiting the sensor angle reduces the risk of the ADF from accidentally darkening from the light generated by bright shop lighting or other welders in the immediate vicinity.

Sensitivity functionThe sensitivity function allows you to adjust the sensitivity of the sensors to the welding process and also conditions in your work area. If bright lights or the arcs generated by nearby welders cause the ADF to prematurely darken, the sensitivity can be decreased to tune out the disturbance.

If the filter fails to darken while attempting to weld at low amperages increase the sensitivity until the ADF operates properly at the required distance.

Delay function (dark to light)Depending on the welding process, temperature and material, the welded material may continue to glow after the welding application. If the welding helmet quickly switches from dark to light after a long welding application, the welder may experience a bright glow for a short time. In this case adjust the delay to the slow setting. For spot or stitch welding switch the delay setting to fast so that the ADF quickly lightens allowing the welder to move rapidly to the next weld point.

Shade level The shade level specifies how much the cartridge darkens. It is usually given by the DIN (German industrial standard). A shade level is selected according to the welding process and current. The shade level also depends on the welder‘s eyes. The welder should be comfortable with the shade that is selected. The shade level recommendation table from EN169 on page 7 gives indications for selecting the correct shade level.

Grinding modeIf a helmet has this function, it means that the ADF can be fixed in the light state for the duration of the grinding process. This prevents the cartridge from darkening due to light pulses from grinding.

True colour viewFor some of the Expert products, special filters garantueeing a more clear view on the welding object are used. The colour recognition through this LCDs is increased, which lets the welder see his welding object in more real colour and allows even to read all red LEDs from the welding machine.

Shade level 4 Shade level 9 Shade level 13

Slow

Fast

Stop Welding 0,2 sec. 0,3 sec. 0,6 sec.

Welding helmets in a feW WordsDelay,sensitivityandLCDaretermsoftenusedintheweldingindustryandareimportanttounderstandbeforeattemptingtoselectaweldinghelmet.Pleasereviewthefollowinginformationcoveringsomeof themost important functionsbeforeyou consider choosing theweldinghelmet thatmeetsyourrequirements:

passive welding helmets / handshieldsPassive welding helmets and handshields are those which contain permanently coloured glass. Passive helmets are worn on the head and must be lowered before striking the arc and raised when not welding. Shields are hand held and are placed in front of the eyes and face when welding then moved to the side when welding is stopped. It is essential when using these shields that good hand to eye coordination is maintained to avoid injury to the eyes.

active welding helmetThe term “active welding helmet“includes all welding helmets that are equipped with a Auto Darkening welding Filter (ADF). A true active welding helmet is light weight, designed to accept an auto-darkening filter which takes into account correct eye to filter distance and alignment with consideration for correct balance and and maximum field of view.

components oF a Welding Helmet

adF - auto darkening FilterThe ADF, also called the cartridge, consists of a printed circuit board, electronic components, arc detection sensors, power supply, liquid crystal display LCD’s and a UV-&IR-filter. This is the part of the helmet that automatically darkens when a welding arc is struck. SPERIAN Welding Protection AG provides a wide range of ADFs with various features and shade protection options.

The quality of the ADF is measured by the European norm. There are four categories, giving an overview on the quality: optical class, scattered Light, homogenity and angular dependence. All marks achieved are printed on

the back of the cartridge: 1 is the best rate, while 3 is the worst.

lcd - liquid crystal displayLCDs enable the user to see through the ADF both before and after the arc is struck. The LCD’s used for this purpose are considered shutters. When the shutter is not energised the user can see through the viewing window. This is generally called the light state which is usually a shade 3 or 4. When the arc is struck the sensors trip an electric output which energizes the LCD whereby causing the shutter to quickly close. This is called the dark state which can be a single shade such as 11 or a variable shade such as 9 through to 13. When the arc is stopped the LCD returns to the light state.

uV-&ir-filterThe UV-&IR-filter protects the welder from dangerous optical radiation in the UV-&IR-range. The UV-&IR-filter reflects and/or absorbs the harmful radiation only allowing safe visible light to pass through to the welder’s eyes. It is important to note that the UV-&IR-filter provides permanent protection regardless of whether the welding filter is in the dark or light state.

inside cover lensAn inside cover lens is used to protect the back of the ADF from dirt and spatter. This thin plastic lens should be replaced when it becomes dirty and discoloured.

sensorsThe welding arc is detected by the sensors. The sensors signal the electronics to darken the LCDs.

Front cover lensThe front cover lens is fitted on the front of the welding helmet. The welding lens or ADF is behind the cover lens and protects from impact, smoke and weld spatter. The front cover lens must be changed regularly when it becomes damaged or discoloured resulting in poor visibility. It is important to note that SPERIAN Welding Protection AG provides a product which has a seal between the front cover lens and the ADF. This stops unnecessary ingress of fume or particulate from damaging both the ADF lens and also the welder.

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

4

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

5

Which helmet is suitable for me?Youcanusetheshadeleveltabletoseewhichhelmetissuitableforyourapplication.TheamperageusedandtheapplicationindicatewhichshadelevelisrecommendedbytheEN169standard.Thechartshowsyouwhichhelmetsmaybesuitable.YoucanthencheckforfunctionssuchasSensitivity,DelayandGrindinthedetailedhelmetdescriptiononthefollowingpages.

proFessionalThe optoelectronic welding helmets in the Professional range are ideal for professional welders who wish to take advantage of the comfort and benefits of a high-quality, active welding helmet.

BasicProducts offering passive protection for welders are available in various versions and materials in the Basic range. The handshields and helmets provide reliable protection for welders who prefer passive products.

eXpertBy experts for experts! The Expert range of optoelectronic welding helmets has been conceived specially for welding experts. The helmets are designed for a wide range of welding methods, to cater for the most diverse of needs and meet even the most discerning demands.

THe rigHT proTecTion for every welder

E X P E R TAmperage range 1,5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500MMA 8 9 10 11 12 13 14

Optrel e680Optrel e670 / Optrel e650 / Optrel OSC

Optrel e640

MAG 8 9 10 11 12 13Optrel e680

Optrel e670 / Optrel e650 / Optrel OSCOptrel e640

TIG 8 9 10 11 12 13 14Optrel e680


MIG heavy metals 9 10 11 12 13 14Optrel e680


MIG light metalsStainless, AI

10 11 12 13 14Optrel e680


Plasma cutting 9 10 11 12 13 14Optrel e680

Optrel e670 / Optrel e650 / Optrel OSC

Micro plasmawelding

4 5 6 7 8 9 10 11 12 13Optrel e680

Optrel e670 / Optrel e650 / Optrel OSC

Amperage range 1,5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500

P R O F E S S I O N A LAmperage range 1,5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500MMA 8 9 10 11 12 13 14

Optrel p550

Optrel p530

MAG 8 9 10 11 12 13Optrel p550

Optrel p530

TIG 8 9 10 11 12 13 14Optrel p550

Optrel p550

MIG heavy metals 9 10 11 12 13 14Optrel p550Optrel p530


10 11 12 13 14Optrel p550

Optrel p530

Plasma cutting 9 10 11 12 13 14Optrel p550

Micro plasmawelding

4 5 6 7 8 9 10 11 12 13Optrel p550

Amperage range 1,5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500

B A S I C ( U P G R A D E )Amperage range 1,5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500MMA 8 9 10 11 12 13 14

Optrel b010 / b020

MAG 8 9 10 11 12 13Optrel b010 / b020

MIG heavy metals 9 10 11 12 13 14Optrel b010 / b020


10 11 12 13 14Optrel b010 / b020

Amperage range 1,5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>in

tro

du

ctio

neX

per

tp

ro

Fess

ion

al

Ba

sic

>>>

6 7

.

Op

tr

el

e6

80

6. 3. 4. 2. 5.

1.

7.

comFort & perFormance tHanKs to tHe BeneFits oF tHe eXpert Helmet sHellThe e600 helmet shell from Sperian not only offers a state-of-the-art design, but also maximum levels of comfort and performance. Specific development work and the greatest care when putting the helmet shell into serious production have ensured that it has been used with great success for more than five years and has come to be a valued unit by many welders. With the updates in the year 2008, the helmet shell has been further adapted to minimize the weight and continue to maintain the robustness required for the welders environment during the welding process whilst also ensuring better protection of the cover lens during every day handling. The rounded shape of the shell and the heat reflectant metallic paints used ensure a more comfortable temperature inside the helmet. Fume is also deflected away from the welder due to the shape again adding to the comfort factor.

comFort & perFormance • Ergonomic design with optimum balance for minimum neck strain • High-grade, heat-resistant material • Heat-reflective colour for comfortable temperatures inside the helmet • Contoured profile, channelling fumes away (A) • Extremely long-life spherical cover lens with a seal to prevent the infiltration

of gas, fumes and particles • Telescoping adjustability of the headband to improve the field of vision (B) • Tilt adjustability to set the optimum position of the helmet in relation to the chin (C) • Extended coverage zone to protect the neck and ears (D)

optrel eXpert

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

8

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

9

1. Adjustable sensor slide eliminates the effects of ambient light distractions with configurable detection angles of 60°or 120°2. Button to select shade level ranges: DIN 5-9 and DIN 9-13 (Optrel e680) or automatic / manual mode (Optrel e670)3. Variable shade level control4. Grinding mode to prevent automatic darkening when grinding and brazing 5. Sensitivity control to adjust the sensors ability to detect the welding arc 6. Selectable opening delay to provide protection from the afterglow and to adapt to personal needs7. Batteries CR2032, 2 pcs (back side)

Op

tr

el e

680

Op

tr

el

e6

70

Welding requires complete concentration. This is no problem with the Optrel e670 - the successor model of the Optrel Orion: the unique sensor technology allows the welding cartridge to automatically select the protection level and constantly adapt it to the welding application using the intensity of the arc during the welding process.The user can select “Auto” or “Manual”. In the “Manual” setting, the user can select the protection level that is best for him. He can adjust the shade setting as required to ensure the most comfortable shade level at all times.If the welder selects “Auto”, the helmet automatically adapts the protection level to the current arc intensity. He can also use the fine adjustment to adjust the automatically selected protection plus or minus one shade level to satisfy his individual needs without the fear of any problem of eye damage. The enlarged field of view (+ 33%) and true color filter allows the welder a brilliant, detailed view of the welding object.

Optrel e670 (4/9-13 with automatic mode)Optrel e680 (4/5-9 and 4/9-13)

designation article no.Optrel e670 cosmic green 1006.210

Optrel e670 black uncoated 1006.200

Optrel e670 cosmic green with hard hat 1006.250 adapter CONNECT Basic

ADF to Optrel e670 5012.420

Helmet shell Optrel e670 cosmic green 5001.604

Helmet shell Optrel e670 black uncoated 5001.610

Featuresshade level 4/9<13 cartridge size / field of view 90 x 110 x 7 mm / 50 x 100 mm

eye protection Maximum UV-&IR-protection at any shade setting

true colour View Yesclassification in accordance with en379 1/1/1/2

shade level setting Two different shade settings: automatic or manual

control unit Outside of the helmetsensitivity adjustment Yesadjustment of the detection angle 60° or 120°

grinding mode Yes (shade level 4)switching timelight to dark

0.180 ms at room temperature 0.120 ms at 55 °C

switching delaydark to light

Slow: 0.35 - 0.6 sFast: 0.1 -0.35 s

power supply Solar cells and batteries, no on/off switch necessary

Battery life time 2500 hours (operation)operating temperature -10 °C to +70 °Ctotal weight 490 g

recommended use All electric arc welding processes.* Not suitable for laser welding!

Warranty 2 years (except batteries)certificates CE, ECS, ANSI, CSA, AS/NZS, GOST-R

* Electric arc welding processes: Electrode Welding (Stick Welding, SMAW), / MIG/MAG (GMAW) / GMAW High melting rate process / Flux Cored Wire Welding / TIG welding (GTAW) / Plasma Arc Welding / Micro Plasma Arc Welding / Plasma cutting

designation article no.Optrel e680 copper 1006.100

Optrel e680 dark blue 1006.110

Optrel e680 snow white 1006.120

Optrel e680 titan 1006.130

Optrel e680 dark blue with hard hat 1006.150 adapter CONNECT Basic


Helmet shell to Optrel e680 copper 5001.600

Helmet shell to Optrel e680 dark blue 5001.601

Helmet shell to Optrel e680 snow white 5001.602

Helmet shell to Optrel e680 titan 5001.603

The helmet Optrel e680 - based on the previous model Optrel Satellite - has been designed specially for welders with varying job requirements and a need for an extensive range of individual adjustment options. The features include protective levels from DIN 5 to DIN 13 and various additional options that provide the welder with absolute freedom and unrestricted comfort. The enlarged field of view (+ 33%) and true color filter allows the welder a brilliant, detailed view of the welding object.The Optrel e680 really is near to perfection, not only with regard to comfort and safety, but also where additional functions are concerned. The DIN 4/5-9 9-13 protective level function gives the welder the freedom to use a range of different processes and therefore weld different materials. The Other options enable the helmet to be personalized to the individual needs of the welder. The enlarged field of view (+ 33%) and true colour filter allows the welder a brilliant, clear, detailed view of the welding application, plus the ability to read all Red LED’s from a welding machine without removing the welding helmet is an extra bonus.

Featuresshade level 4/5-9 and 4/9-13 cartridge size / field of view 90 x 110 x 7 mm / 50 x 100 mm


true colour View Yesclassification in accordance with en379 1/1/1/2

shade level setting 2 shade level ranges: 5 to 9 and 9 to 13control unit Outside of the helmetsensitivity adjustment Yesadjustment of the detection angle 60° or 120°



switching delaydark to light

Slow: 0.35 - 0.6 sFast: 0.1 - 0.35 s

power supply Solar cells, and batteries no on/off switch necessary


recommended useAll electric arc welding processes* and gas welding. Not suitable for laser welding!

Warranty 2 years (except batteries)

certificates CE, ECS, ANSI, CSA, AS/NZS, GOST-R


intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

10

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

11

Op

trel

e65

0

Optrel e650 (4/9-13)

Op

tr

el

e640

Standard functions in a top quality helmet. Thanks to the extremely high quality filter and the use of the Expert helmet shell, the welder benefits from excellent optics, shade selection plus comfort and protection advantages.The welder can select the protection level according to his requirements using the slide switch on the rear of the cartridge. It can be set to either DIN 10 or DIN 11. The detection angle for ambient light can be selected using the sensor bar.

designation article no.Optrel e640 sand 1006.410


Optrel e640 black uncoated with hard hat 1006.450 adapter CONNECT Basic


Helmet shell Optrel e640 sand 5001.606


Choose your shade level inside the helmet

Featuresshade level 4/10-11cartridge size / field of view 90 x 110 x 7 mm / 38 x 98 mm

eye protection Maximum UV-&IR-protection at any shade level setting

true colour View Noclassification in accordance with en379 1/1/1

shade level control Inside the helmetsensitivity adjustment Noadjustment of the detection angle 60° or 120°

grinding mode Not possibleswitching timelight to dark


switching timedark to light 0.2 - 0.3 s

power supply Solar cells, no battery exchange, no on- and off-switch necessary

operating temperature -10 °C to +70 °Ctotal weight 460 g


Warranty 2 yearscertificates CE, ECS, ANSI, CSA, AS/NZS, GOST-R


The new 9-13 helmet out of the Sperian Expert-line meets all sorts of needs: comfort and customization possibilities, a large viewing area and consistent quality make the Optrel e650 an optimal working product for most welding processes. Additional to the infinitely variable shade level from 9 to 13, the helmet offers a sensitivity and delay function, adaptable from the outside of the helmet. This guarantees a maximum on comfort and absolute efficiency for every welder.

Optrel e640 (4/10-11)

designation article no.Optrel e650 shiny ruby 1006.310


Optrel e650 black uncoated with hard hat 1006.350 adapter CONNECT Basic


Helmet shell Optrel e650 shiny ruby 5001.605


Featuresshade level 4/9-13cartridge size / field of view 90 x 110 x 7 mm / 50 x 100 mm

eye protection Maximum UV-&IR-protection at any shade level setting

true colour View Noclassification in accordance with en379 1/1/1/2

control unit Outside of the helmetsensitivity adjustment Yesadjustment of the detection angle 60° or 120°



switching timedark to light

Fast: 0.35 - 0.6 sSlow: 0.1 -0.35 s

power supply Solar cells and batteries, no on/off switch necessary



garantuee 2 years (except batteries)certificates CE, ECS, ANSI, CSA, AS/NZS, GOST-R


intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

12

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

13

Op

tr

el

e11

00

Safe protection of the respiratory tract system for gas and particulates (Optrel e1100) or a combination system for gas and particles (Optrel e2100) cover all possible safety requirments in welding by in the same time keeping the high level of comfort.

The helmet shell used for all Sperian PAPR systems is based on the Optrel e600-shell. Thanks to a special inner mask, the airflow can be regulated to give a maximum on comfort and individual adaptability to each welder :

if the welder chooses «off», 100% of the airflow is lead directly to the mouth area. if the welder chooses «on», 20% of the air is lead to his forehead, while 80% is directed to the mouth area. this leads to a cooling effect without irritating the eyes due to high air flows passing by.All PAPR system consist out of a blower powered by a rechargeable battery, that draws ambient air through a fine filter and ventilates the helmet with clean and refreshing air. The units are fitted with both a visible an audible alarm which tells the operator if the filter is blocked or the battery is low. For a well adapted fit, outstanding wearing comfort, and a perfect seal, the face seal used is made from a knitted soft flame retardant material. A comfortable flame-retardant waist belt threads through a leather lumbar support which fits the system to the user’s body

protective & safe• The smart electronics of the e1100 provide a constant airflow

rate of 150l/min, regardless of battery charge and filter loading and keeps a permanent overpressure in the helmet to avoid the penetration of pollutant. The airflow of the Optrel e2100 can be chosen: either 140l/min, 160l/min or 180l/min.

• Maximum safety with dual alarm indicators - audible and visible - which indicate a clogged or missing filter or low battery charge.

• Short air duct attached to helmet decreases the risk of snagging upon surrounding structures in 3D constructions. The supply hose is equipped with a flame resistant protective sleeve.

Optrel pApr eXpert

designation article no. unit/boxOptrel e1100 with Optrel e680 dark blue 4240.003 1 pc

Optrel e1100 with Optrel e670 cosmic green 4260.001 1 pc

Optrel e1100 with Optrel e650 black uncoated 4270.000 1 pc

Optrel e1100 with Optrel e640 black uncoated 4280.000 1 pc

Features

protection levelClassification TH2PNominal Protection Factor (NPF): 50Assigned Protection Factor (APF): 20

Blower unit Flow rate: min. 150l/min controlledmaterial Polyamid (PA-GF)Fan High quality ball bearing fan motorFuse Electronic fusenoise Max. 70 dB(A)

alarms Optical and audible alarms for low battery charge, low air flow, missing filter

Battery (standard) Li-Ion, 4400 mAh, weight: 420gBattery operating time Typical 11 hourscharging time 7 hrsFilter 1 x typ TH3P for TH2P-systemHose Lenght: 1160 mm, weight: 185gWeight 1205g (blower incl. filter and belt)dimensions (LxWxH): 249 x 213 x 87 mmWarranty 2 years (except battery)

Optrel e1100

Especially designed for welders, the Optrel e1100 provides ideal protection against, flying particles, metal fumes and dusts emitted during welding and associated processes.

The filter used is a special, fine particulate filter, offering ideal protection at all kind of particles emitted during the welding process. The Optrel e1100 can be fitted to all different kind helmets out of the Optrel e600 series.

optrel e1100 spare parts designation article no. unit/boxUpgrade Kit Optrel e680 dark blue-e1100 4242.003 1 pcwithout cartridge

Upgrade Kit Optrel e670 cosmic green 4262.001 1 pc- e1100 without cartridge

Upgrade Kit Optrel e650 black untreated 4262.000 1 pc-e1100 without cartridge

Upgrade Kit Optrel e640 black untreated 4282.000 1 pc-e1100 without cartridge

Optrel e1100 Standard (EU) 4251.000 1 pc

Fabric belt with back support 4155.002 1 pc

Fabric belt without back support 4155.030 1 pc

Leather belt 4155.004 1 pc

Air hose 4155.021 1 pc

Air hose & protective sleeve 4155.022 1 pc

Protective sleeve 4155.003 1 pc

Charger Optrel e1100 4255.001 1 pc

TH3P filter for e1100 TH2P system 4088.000 1 pc

designation article no. unit/boxBattery “Standard” 4255.006 1 pc

Battery “Longlife” 4255.007 1 pc

Flow indicator 4155.000 1 pc

Storage case 4074.001 1 pc

Face seal 4160.000 1 pc

Optrel leather head / neck 4028.031 1 pc protection for PAPR welding helmets

on off

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

14

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

15

Op

tr

el

e2

100

Op

tr

el

Ha

rd A

da

pte

r

accessories For eXpert range Helmetsdesignation article no. unit/boxOptrel hard hat adapter CONNECT Basic 5011.100 1 pc

Optrel hard hat adapter CONNECT PAPR 4230.000 1 pcfor Optrel e680/e670/e650, dark blue

Optrel hard hat adpater CONNECT PAPR 4231.000 1 pc for Optrel e640, black untreated

Optrel leather chest protection 4028.015 1 pc

Optrel leather head / neck protection** 4028.016 1 pc

Optrel leather head / neck protection 4028.031 1 pc for PAPR welding helmets

** Not suitable for Optrel e600 series in combination with PAPR systems

Optrel SpAre pArtS FOr eXpert rANGe

The Optrel e2100 offers perfect protection against gas and vapors as well as against particles. With the different combination filters, the welder can choose the optimum protection suiting his requirements. There are three filters to be used for each system to garantuee the highest protection against different kind of gases.

optrel e2100 spare partsdesignation article no. unit/boxTH2P R SL filter 4088.030 3 pcs

TH2A2P SL filter 4088.031 3 pcs

TH2A2B2E2SXPSL - Ozone filter 4088.032 3 pcs

Replacement battery 4355.006 1 pc

Charger Optrel e2100 4355.005 1 pc

Fabric belt with back support 4355.030 1 pc

Air hose (without protective sleeve) 4355.021 1 pc

Protective sleeve 4155.003 1 pc

Optrel e2100 blower 4351.000 1 pc

Upgrade Kit Optrel e680 dark blue-e2100 4342.000 1 pc without-cartridge

Storage case 4074.001 1 pc

Face seal 4160.000 1 pc

Optrel e2100

spare parts For Helmets optrel Front coVer lenses designation article no. unit/boxOptrel front cover lens to Expert helmets 5000.210 2 pcs

Optrel front cover lens to Expert helmets 5000.212 5 pcs

optrel inside coVer lens designation article no. unit/boxOptrel inside cover lens e680, 5000.001 5 pcs e670, e650

Optrel inside cover lens e640 5000.300 5 pcs

otHer optrel spare partsdesignation article no. unit/boxOptrel repairset 1 e600-series* 5003.500 1 pc

Optrel repairset 2 e600-series* 5003.501 1 pc

Optrel headband 5003.250 1 pc

Optrel sweatband 5004.073 2 pcs

* Repairset 1: 1 Potentiometer knob, 1 Satellite back cover, 1 Sensitivityknob Repairset 2: 2 Clips, 2 screws.

optrel e680, e670, e650 accessoriesdesignation shade level article no. unit/boxOptrel inside cover + 1 shade level 5000.011 5 pcs lens blue

Optrel inside cover + 1.5 shade levels 5000.012 5 pcs lens light green

Optrel inside cover + 2 shade levels 5000.013 5 pcs lens dark green

Optrel diopter 1.00 5000.050 1 pc




optrel e640 accessoriesdesignation shade level article no. unit/boxOptrel diopter 1.00 5000.500 1 pc




Optrel inside cover + 1 shade level 5000.450 5 pcs lens blue

Optrel inside cover + 1.5 shade levels 5000.400 5 pcs lens light green

Optrel inside cover + 2 shade levels 5000.350 5 pcs lens dark green

Featuresprotection level Classification TH2PBlower unit Flow rate: min. 140/160/180l/min controlledmaterial Polyamid (PA-6)Fan High quality brush less fan motorFuse Polyswitchnoise 55 - 61 dB(A)

alarms Optical and audible alarms for low battery charge, low air flow

Battery (standard) NiMH, 4500 mAh, weight: 570gBattery operating time Typical 10-11 hours with TH2P R SL filterscharging time 10 hoursFilter TH2P particle, gas or combination filtersHose Lenght: 1160 mm, weight: 180gWeight 950g (blower incl.belt)dimensions (LxWxH): 208 x 150 x 132 mmWarranty 1 year (except battery)

designation article no. unit/boxOptrel e2100 with Optrel e680 dark blue 4341.000 1 pc (no filters included!)

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

16

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

17

easY Handling and improVed eFFiciencY tHanKs to tHe BeneFits oF tHe optrel p500 seriesThe p500 series, with its half-rounded shape, meets the demands of professional welders. Welding fume is efficiently dissipated and weld splatter finds no purchase thanks to the rounded shape.Thanks to the use of the patented headband, these helmets can be easily adapted to the needs of each welder.

the optrel p500 series is the sperian range of optoelectronic helmets for professional and occasional welders, combining safe protection, comfort, quality and design. a new concept!With the new helmets in the professional range, welders will be able to customise their welding helmet for personalised protection. All Optrel p500 helmets are delivered with one pair of side covers, that are exchangeable and replaceable. Sperian Protection can supply a collection of side covers to personalise your helmet!

new helmet shell design:

Modern and attractive, ergonomic and lightweight, the helmet shell of the Optrel p500-series has been developed to fulfil the highest requirements in terms of comfort. Additionally, it offers the many advantages of the well known Optrel headband. The headband and the shell design optimise weight distribution to eliminate neck strain for the welder.

Features and benefits: - The sensitivity of the autodarkening filter can be adjusted to the welding process

and also to suit working conditions.- Optimised cover lens for perfect protection against spatters and fumes. - Delay switch controls the speed of the transition from dark to light state after

welding.- Thanks to the enlarged LCD, the Optrel p500-series offers a comfortable viewing area. - Due to improved technologies and optimised production methods, the Optrel p500

is very comfortable.- Together with the optimised weight distribution of the helmet and the

comfortable, adjustable headband, this makes the helmet unrivalled in terms of wearing comfort.

proFessional range

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

18

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

19

Op

tr

el

p5

05

Op

tr

el

p5

30

Op

tr

el

p5

00

optrel p500-seriesThe Professional line from SPERIAN offers an absolutely comfortable and reliable protection for most welding applications. Thanks to the innovative design concept and the modern helmet shell, the welder can choose the p500 helmet, suiting his style. Thanks to the newly developped and patented sidecovers, the welder can adapt his helmet again and again to new styles and requirments.

optrel p530 (din 4/11)

Top quality in a standard single shade ADF! The cartridge of the Optrel p530 switches from the light state DIN 4 to dark state DIN 11. The solar cells and the replaceable batteries ensure a constant and long-life power supply without on- and off-switch. Additionally, the helmet offers a sensitivity and a delay function.

optrel p505 (din 11) Profit from the advantages from the p500-helmet shell and use it for passive protection. The p505 helmet offers a DIN 11 passive protection glass in the size 90x1100mm for a wide view.

designation article no.Optrel p505 black untreated (without side covers) 1007.500

Optrel helmet shell 505 black untreated 5001.750 (without side covers)

Passive filter DIN11 90 x 1100 mm (25pcs) 3800251

for Optrel p505

Featureseye protection Permanent UV- & IR-protectionoperating temperature -10 °C to +70 °Ctotal weight 485 gField of view 90 x 110 mm


Warranty 2 yearscertificates CE, ECS, GOST-R, ANSI


designation article no.Optrel p530 black untreated (without side covers) 1007.100Optrel p530 black-green 1007.110Optrel p530 black-white 1007.120Optrel p530 white-black 1007.130Optrel helmet shell p530 black untreated 5001.750(without side covers)Optrel helmet shell p530 black-green 5001.760Optrel helmet shell p530 black-white 5001.770Optrel helmet shell p530 white-black 5001.780ADF to Optrel p530 5012.750

Featuresshade level 4/11

cartridge size 90 x 110 x 9.5 mm(50 x 100 mm viewing area)


classification in accordance with en379 1/2/1/2

sensitivity Yesadjustment of the detecting angle No

grinding mode Noswitching timelight to dark

At 23°C: 0.220 msAt 55°C: 0.165 ms

switching timedark to light 0.25-0.7s infinitely adjustable

power supply Solar cells and replaceable batteries, no on/off switch necessary

operating temperature - 10°C to + 70°Ctotal weight with/without side covers 510g / 485g


Warranty 2 years (except batteries)certificates CE, ECS, GOST-R, ANSI

optrel p550 (din 9-13) The Optrel p550 offers the welder a DIN 9/13 function with sensitivity and delay which protects the welder during most ofthe standard welding processes. The good quality ADF combined with the p500-helmet shell guarantees a long life timeand a good standard of helmet for every welder. Replaceable batteries and solar cell technology guarantee an optimisedpower supply for a extended life time.

designation article no. Optrel p550 black untreated (without side covers) 1007.000

Optrel p550 black-green 1007.010

Optrel p550 black-white 1007.020

Optrel p550 white-black 1007.030

Optrel p550 black untreated (without side covers) 1007.001 with hard hat adapter CONNECT Basic

Optrel helmet shell p550 black untreated 5001.650 (without side covers)

Optrel helmet shell p550 black-green 5001.660

Optrel helmet shell p550 black-white 5001.670

Optrel helmet shell p550 white-black 5001.680

ADF to Optrel p550 5012.700

Featuresshade level 4/9-13

cartridge size 90 x 110 x 9.5 mm(50 x 100 mm viewing area)


classification in accordance with en379 1/2/1/2

sensitivity Yesadjustment of the detecting angle No

grinding mode Noswitching timelight to dark

At 23°C: 0.220 msAt 55°C: 0.165 ms

switching timedark to light 0.25-0.7s infinitely adjustable

power supply Solar cells and replaceable batteries, no on/off switch necessary

operating temperature - 10°C to + 70°Ctotal weight with/without side covers 520g / 495g


Warranty 2 years (except batteries)certificates CE, ECS, GOST-R, ANSI

* Electric arc welding processes: Electrode Welding (Stick Welding, SMAW), / MIG/MAG (GMAW) / GMAW High me lting rate process / Flux Cored Wire Welding / TIG welding (GTAW) / Plasma Arc Welding / Micro Plasma Arc Welding / Plasma cutting

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

20

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

21

Optrel SpAre pArtS FOr prOFeSSIONAl rANGe

optrel Front coVer lenses designation article no. unit/boxOptrel front cover lens for p500 series 5000.250 5 pcs

optrel inside coVer lenses designation article no. unit/boxOptrel inner protection lens 5000.001 5 pcs for Optrel p550/p530

Clear lens 90x110mm for Optrel p505 5000.255 25 pcs

side part BoXes designation article no. unit/boxSide covers «Reptile» 5002.500 10 pairs / boxSide covers «Electronic» 5002.510 10 pairs / boxSide covers «Tiger» 5002.520 10 pairs / boxSide covers «Tribal» 5002.530 10 pairs / boxSide covers «Skull» 5002.540 10 pairs / boxSide covers «Bulldog» 5002.550 10 pairs / boxSide covers «Mirror» 5002.560 10 pairs / box

The coloured versions of the p500-line can be adapted to the welder’s or employer’s personal needs. Thanks to exchan-geable sidecovers, the welder can easily change the design of his welding helmet. Is it to adapt it to his personal style, to express his minds, to make the welding helmet visibly being his own or to mark important notices for the employer on the helmet: everything is possible. Just choose the side covers you like and fit it to your Optrel p500 helmet:

OPTREL p500 SIDECOVERS

otHer optrel spare parts designation article no. unit/boxOptrel potentiometer knob Optrel p550 5000.862 10 pcs

Optrel headband 5003.250 1 pc

Optrel sweatband 5004.073 2 pcs

Retention spring for Optrel p505 5002.210 10 pcs

accessories designation + shade level article no. unit/boxOptrel hard hat adapter 5011.100 1 pc

Optrel leather chest protection 4028.015 1 pc

Optrel leather head / neck protection** 4028.016 1 pc

Optrel inside + 1 shade level 5000.011 5 pcs cover lens blue

Optrel inside + 1.5 shade levels 5000.012 5 pcs cover lens light green

Optrel inside + 2 shade levels 5000.013 5 pcs cover lens dark green





Reptile

Tribal

Electronic

Skull

Tiger

Bulldog

Mirror

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

22

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

23

Op

tr

el

b11

0

Op

tr

el

b12

0

Op

tr

el

b13

0

High-grade thermoplastic resin for solid, dependable performance.Optrel b100 serie is manufactured from high-grade thermoplastic resin. The excellent temperature and resistance properties of this material make an ideal fit with the modern, ergonomic form. The Optrel b100 serie is primarily recommended for welders who require a dependable basic product. For occasional electrode welding jobs, they offer an affordable solution for good, reliable eye and facial protection suitable for applications up to around 100 °C.

designation article no. unit/boxOptrel b110 105 x 50 mm / 2” x 41/4” 1005.000 10 pcs

Optrel b110 90 x 110 mm 1005.001 10 pcs

Optrel b110 31/4” x 41/4” 1005.002 10 pcs

Optrel b110 55 x 110 mm 1005.003 10 pcs

Optrel b110 60 x 110 mm 1005.004 10 pcs

Optrel b110 75 x 98 mm 1005.005 10 pcs

optrel b110This light weight handshield including front cover lens and DIN 11 welding filter is available with six country- specific adapters.

optrel b120This light weight welding helmet including front cover lens, headband and DIN 11 welding filter is available with six country-specific adapters.

optrel b130The Optrel b130 is a light weight welding helmet with silent action closable flip up, including front cover lens, headband and DIN 11 welding filter. One of the benefits of this helmet is the extra large viewing window when flipped up.



Optrel b120 90 x 110 mm 1005.011 10 pcs

Optrel b120 31/4” x 41/4” 1005.012 10 pcs

Optrel b120 55 x 110 mm 1005.013 10 pcs

Optrel b120 60 x 110 mm 1005.014 10 pcs

Optrel b120 75 x 98 mm 1005.015 10 pcs

Optrel b100-series

Feel Free tHanKs to a modern and compact sHapeThepassiveproductsfromSperianhaveallbeennewlydesignedtofittheneedsofthemodernwelders.Thenewshapeoffersahighcomfort,especiallyweldinginrestrictedenvironments,butadditionallyprotectsthewelderperfectlyagainstspatters,UV-&Ir-raditionandmetaldrops.The different lines offered give the welder the chance to choose the suitable product, perfectlycorresponding to his needs. Depending on the temperature, the material welded and the weldingprocess,theweldercanchooseoneofthelinesoffered.Additionally,hecanchoosetherightproductoutoftheline:Handshield,helmetorflipup.

optrel Basic

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>in

tro

du

ctio

neX

per

tp

ro

Fess

ion

al

Ba

sic

>>>

25

Opt

rel

b420

Optr

el b

520

Op

tr

el

b2

10

Op

tr

el

b2

20

Op

tr

el

b2

30

Op

tr

el

b3

10

Op

tr

el

b3

20

Op

tr

el

b3

30

optrel b210Hand shield including front cover lens and a DIN 11 welding filter. The special lens slider mechanism on the handle of the b210x allows a quick adjustment between a non-darkened state and the DIN 11 welding filter.

designation article no. unit/boxOptrel b210 105 x 50 mm / 2” x 41/4” 3037000 10 pcs

Optrel b210 90 x 110 mm 3800014 10 pcs

Optrel b210 31/4” x 41/4” 3800015 10 pcs

Optrel b210x 105 x 50 mm / 2” x 41/4” 3021402 10 pcs with a sliding lens

optrel b220Welding helmet including front cover lens, a DIN 11 welding filter and a headband.


Optrel b220 90 x 110 mm 3890008 10 pcs

Optrel b220 31/4” x 41/4” 3800029 10 pcs

optrel b230Welding helmet with flip-up window, including front cover lens, a DIN 11 filter and a headband.


Optrel b300-seriescompact fibreglass mat design for low weight and high resistance. Like the Optrel b200-series, the b300-serie-products are glass-fibre reinforced. This produces an absolutely resistant material that reliably protects the welder from spatter and high temperatures up to around 400 °C. The use of a compact layer of fibreglass and a medium wall thickness makes the b300-series products extremely lightweight.

optrel b310Handshield including front cover lens and a DIN 11 welding filter.

designation article no. unit/boxOptrel b310 105 x 50 mm / 2’’ x 41/4’’ 1005.030 10 pcs

optrel b320Welding helmet including front cover lens, headband and a DIN 11 welding filter.


optrel b330Welding helmet with silent-action closable flip-up window, including front cover lens, headband and a DIN 11 welding filter. Extra large window when flipped up.


optrel b420 & b430Leather helmet and flip up with DIN 11 welding filter and flexible headband. Split leather

designation size article no. unit/boxOptrel b420 (helmet) 105 x 50 mm 3800079 1 pc

Optrel b430 (flip up) 105 x 50 mm 3800289 1 pc

optrel b520 & b530Leather helmet and flip up with DIN 11 welding filter and flexible headband. Top grain leather.

designation size article no. unit/boxOptrel b520 (helmet) 105 x 50 mm 3800071 1 pc

Optrel b530 (flip up) 105 x 50 mm 3800070 1 pc

Optrel b200-seriesuse a top helmet shell for passive protection.The Optrel b200 series is made from a highly temperature resistant glass-fibre composite material. The unevenly arranged fibres combined with the plastic resins used protect the welder from welding spatters which are self-extinguishing when in contact with the material. The high temperature resistant material withstands temperatures up to 400 °C and the rugged design make these helmets ideal for long, intensive use in practically any welding process.

optrel b600designation article no. unit/box shade level glass sizeOptrel b620 105 x 50 mm helmet 3890001 10 pcs DIN 11 105 x 50 mmOptrel b630 105 x 50 mm Flip up 3890004 10 pcs DIN 11 105 x 50 mm

specific spare parts to optrel b600Helmet shell Optrel b600 5001.912 1 pcAdapter 105 x 50 mm for Optrel b620 5002.062 1 pcFlip up Adapter 105 x 50 mm for Optrel b630 5002.080 1 pcFront Cover lens 105 x 50 mm for Optrel b620 and Optrel b630 5000.223 5 pcsInside cover lens 105 x 50 mm for b620 / b630 5000.300 5 pcsSafety protection lens for Optrel b630 Flip up adapter 5000.370 5 pcsRetention spring for Optrel b620/b630 105 x 50 mm 5002.067 5 pcs

Op

trel

b60

0

optrel b400 & b500-seriesLeather hoods with a passive filter inside. These are ideal for working in extremely restricted areas within fabricated constructions, cramped conditions, pipe work repairs etc. Sometimes the leather hood might be the only way to gain the protection required for that difficult job.

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

26

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

27

convert passive into active! The two products, Optrel b010 and Optrel b020 offer customers with passive handshields and helmets the possibility of upgrading to active welder protection, without the need to change their handshield or helmet. Both the Optrel b010 and the Optrel b020 can be used in place of the passive lens.

optrel B010 - autodarkening filter with batteriesdesignation article no. unit/box power supply shade level cartridge sizeOptrel b010 5012.520 1 pc Battery DIN 3/10 108 x 51 x 5 mmOptrel b010 5012.511 1 pc Battery DIN 3/11 108 x 51 x 5 mmOptrel b010 5012.500 1 pc Battery DIN 3/10 110 x 90 x 5 mmOptrel b010 5012.501 1 pc Battery DIN 3/11 110 x 90 x 5 mm

optrel B020 - autodarkening filter with solar cellsdesignation article no. unit/box power supply shade level cartridge sizeOptrel b020 Nordic 5012.199 1 pc Solar cells DIN 3/10 110 x 60 x 5 mmOptrel b020 5012.202 1 pc Solar cells DIN 3/10 108 x 51 x 5 mmOptrel b020 5012.300 1 pc Solar cells DIN 3/11 108 x 51 x 5 mm

optrel passiVe Welding Filtersdesignation Window size shade article no. unit/boxOptrel passive filter 105 x 50 mm / 108 x 51 mm DIN 8 3000008 100 pcsOptrel passive filter 90 x 110 mm DIN 8 3800248 25 pcsOptrel passive filter 105 x 50 mm / 108 x 51 mm DIN 9 3000009 100 pcsOptrel passive filter 90 x 110 mm DIN 9 3800249 25 pcsOptrel passive filter 105 x 50 mm / 108 x 51 mm DIN 10 3000010 100 pcsOptrel passive filter 90 x 110 mm DIN 10 3800250 25 pcsOptrel passive filter 105 x 50 mm / 108 x 51 mm DIN 11 3000011 100 pcsOptrel passive filter 90 x 110 mm DIN 11 3800251 25 pcsOptrel passive filter 105 x 50 mm / 108 x 51 mm DIN 12 3000012 100 pcsOptrel passive filter 90 x 110 mm DIN 12 3800252 25 pcsOptrel passive filter 105 x 50 mm / 108 x 51 mm DIN 13 3000013 100 pcsOptrel passive filter 90 x 110 mm DIN 13 3800253 25 pcs

optrel clear lensesdesignation Window size article no. unit/box Optrel clear lens 105 x 50 mm 3800257 100 pcsOptrel clear lens 90 x 110 mm 3800259 100 pcsOptrel clear lens 106 x 32 mm 3800258 100 pcsOptrel clear lens anti spatter, thermosetting 105 x 50 mm 3000022 200 pcsOptrel clear lens anti spatter, thermosetting 110 x 90 mm 3800261 200 pcsOptrel clear lens anti spatter, thermosetting 106 x 32 mm 3800262 200 pcsOptrel clear lens anti spatter, thermosetting 110 x 60 mm 3800266 200 pcs

otHer optrel spare partsdesignation article no. unit/boxOptrel headband b100, b300 5003.260 1 pcOptrel headband b200 Standard 3021300 1 pcOptrel headband b200 Comfort 3800452 1 pcOptrel sweatband b100, b200, b300 3800756 5 pcs

OPTREL UPGRADE CARTRIDGES & SPARE PARTS fOR BASIC RANGE

HEAD TO TOE PROTECTION SPECIFICALLY DESIGNED FOR WELDERS

respiratorY protection Respiratory illnesses constitute a real threat for all welders and other persons working with treated metals (galvanised steel, etc.). Sperian Protection proposes a complete range of solutions (single-use masks, half masks...) adapted to each specific need.

Hearing protectionWorkshops are often noisy (welding stations, presses, sheet metal noise, etc.) and welders need to protect themselves to preserve their hearing. Sperian Protection has developed a specific range of ear plugs and ear muffs that meet the needs of welders.

Fall protectionSperian Protection has developed a specific

range of Kevlar harnesses resistant to projections of molten metal for welders

working at height (building and public works, industrial maintenance, shipyards, etc.)

Sperian Protection also proposes a complete range of individual head to toe protection equipment specifically designed for welders and anyone working with metal or grinding equipment: protective gloves, safety shoes, hearing protection, respiratory protection and technical workwear.

All of its products combine ergonomics, comfort and design while at the same time ensuring reliable and uncompromised protection.

gloVesSperian Protection proposes a wide range of high quality gloves offering excellent dexterity and good heat resistance, specially designed for TIG, MIG and MAG welding.

tecHnical WorKWearSperian Protection offers

a complete range of clothing specially designed for different welding processes to protect welders from molten metal spatter: clothing made from leather, Proban treated

cotton, Nomex, etc.

sHoesSperian Protection has developed models of safety shoes dedicated to welders and foundry workers. These shoes comprise a nitrile rubber sole that can withstand temperatures up to 300°C and a quickly unfastenable spark-resistant flap.

eYe and Face protectionApart from welding masks,

welders and/or welders’ assistants sometimes need to protect their eyes from

splinters and molten metal spatter. Sperian Protection offers a complete range of

goggles, protective glasses and visors from clear to shade 6.

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

28

intr

od

uct

ion

eXp

ert

pr

oFe

ssio

na

lB

asi

c

>>>

29

Documents

s6655d29104a9ffb6.jimcontent.com... - DOC 1799 Welding Helmets sperian protection europe (sas) Immeuble Edison - Paris Nord 2 33, rue des Vanesses BP 55288 Villepinte 95958 Roissy