ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτo · Title : Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel

Λεωφ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ 21455, 1509 Λευκωσία, Κύπρος T: +357 22889860 F: +357 22665685 E: [email protected] W: www.ccci.org.cy

Λευκωσία, 11 Δεκεμβρίου 2019

ΠΡΟΣ: Όλα τα Μέλη

Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων, υπηρεσιών ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ.

mailto:[email protected]

http://www.ccci.org.cy/

mailto:[email protected]

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2019-11-01 to 2019-11-30

Register issued on : 2019-12-06

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2019-11-26Organization : ISSCountry : Serbia Latest Date for Comments : 2019-12-06

Project ID : 00069335/0001 Draft for public enquiry

ICS : 03.100.01National Ref : nkSRPS TR A.L2.003-5:2019Title : Security and resilience of the society - Risk assessment – Part 5: Guidance for the

development a security plan

Relatedness :National : New

** End of Subsector **

** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 5Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2019-11-26Organization : AFNORCountry : France

Project ID : 00217617/0001 Project Established

ICS :National Ref : PR NF S62-201Title : Fire fighting equipment - Fire hose reel - Installation and maintenance requirements




ICS :National Ref : PR NF S61-759-1Title : Firefighting equipment - Fire risers (dry and water based) - Installation and maintenance


Subsector : B01 Registration Date : 2019-11-29Organization : BSI Draft Issue Date : 2019-10-25Country : United Kingdom Latest Date for Comments : 2019-12-29


ICS :National Ref : PD 7974-5Title : Applicationoffiresafetyengineeringprinciplestothedesignof

buildings. Part 5. Fire and rescue service intervention (Sub-system 5)


Subsector : B01 Registration Date : 2019-11-29Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8619Title : Determinationoftheresistancetohydrocarbonpoolfiresoffireprotection

materials and systems for pressure vessels


Subsector : B01 Registration Date : 2019-11-07

Page 6

Organization : NENCountry : Netherlands


ICS : 13.220.20National Ref : NEN 2555:2008 Title : Fire safety in buildings - Smoke alarms for dwellingsScope : NEN 2555 gives specifications for non-ionizing smoke alarms with acoustic signals applied in

dwellings.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2019-11-25Organization : ASICountry : Austria


ICS : 91.010.30National Ref : ÖNORM A 6241-1Title : Digital structure documentation - Part 1: CAD data structures and building information

modeling (BIM) - Level 2Scope : The present Austrian Standard specifies the technical implementation of data exchange and

data storage for information on building construction and related spatial civil engineering constructions which are required during the life time cycle management of real estate property.This Austrian Standard defines the most important terms, structures and presentation principles for the basic techniques of data transfer of two-dimensional CAD files and for Building Information Modeling (BIM).


Subsector : B02 Registration Date : 2019-11-05Organization : ISBIHCountry : Bosnia and Herzegovina


ICS : 91.010.30National Ref : nsBAS EN 1991-2/NA:2019Title : Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges - National AnnexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1991-2:2016 and applied together with that standard.



Page 7


ICS : 91.010.30National Ref : nsBAS EN 1991-4/NA:2019Title : Eurocode 1 - Actions on structures - Part 4: Silos and tanks - National AnnexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1991-4:2016 and applied together with that standard.




ICS : 91.120.25National Ref : nsBAS EN 1998-4/NA:2019Title : Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and

pipelines - National AnnexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1998-4:2017 and applied together with that standard




ICS : 91.010.30National Ref : nsBAS EN 1993-1-10/NA:2019Title : Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-

thickness properties - National AnnexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1993-1-10:2018 and applied together with that standard.




ICS : 91.010.30National Ref : nsBAS EN 1993-1-11/NA:2019Title : Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension

components - National annexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1993-1-11:2018 and applied together with that

Page 8

standard.




ICS : 91.010.30National Ref : nsBAS EN 1993-1-12/NA:2019Title : Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of

EN 1993 up to steel grades S 700 - National AnnexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1993-1-12:2018 and applied together with that standard.




ICS :National Ref : NA to BS EN 1991-2:2003 AMD1Title : UKNationalAnnextoEurocode1.Actionson

structures. Part 2. Traffic loads on bridges. Amendment




ICS :National Ref : PD 6694-1:2011+A1:2020Title : PD6694-1AMD1.Recommendationsforthedesignofstructuressubjecttotraffic

loading to BS EN 1997-1:2004. Amendment


Subsector : B02 Registration Date : 2019-11-20Organization : UNMZ Draft Issue Date : 2019-11-20Country : Czech Republic Latest Date for Comments : 2020-12-15


ICS :

Page 9

National Ref :Title : Design of building structures loaded by dynamic effects of machinesScope : The aim of the review standard is unification of the standard according to the other

standards.

Relatedness :National : REV/AMD CSN 73 0032 (2019)


Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2019-11-26Organization : SNV Draft Issue Date : 2019-11-14Country : Switzerland Latest Date for Comments : 2020-01-31

Project ID : CH190019/0001 Draft for public enquiry

ICS : 91.060.50National Ref : prSIA 343/2Title : Pedestrian doors in escape and rescue routes – Caracteristics and applications



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT



ICS :National Ref : PRNFE29-190-4Title : Gas pressure regulators for distribution and service lines - Part 4 : batteries




ICS :National Ref : PR NF E29-191Title : Safety devices for gas pressure regulating stations and installations - Gas safety shut-off

devices for inlet pressures up to 5 bar, for supply networks and service lines


Subsector : B25 Registration Date : 2019-11-26

Page 10

Organization : AFNORCountry : France


ICS :National Ref : PRNFE29-190-3Title : Gas pressure regulators for distribution and service lines ¿Part 3: Type D Regulators



Subsector B26: ROAD BUILDING AND MAINTENANCE



ICS :National Ref : XP G38-065Title : Geosynthetics and geotextile related products - Reinforcement of embankement basis in

areas submitted to risk of collapse - Justification of dimensioning and design elements


Subsector : B26 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-19

Project ID : P0051424/0001 Draft for public enquiry

ICS :National Ref : PNE 41265-1 INTitle : Road pavements. Laying and control. Part 1: thermal control of bituminous mixesScope : The main objective of the standard is to identify and define equipment and methods of

temperature control during the manufacture, laying of bituminous mixtures and handling in laboratory in order to reduce thermal segregation.



Subsector B27: WATERPROOFING MATERIALS



ICS :National Ref : PR NF P84-360Title : Sealing materials. Modified bitumen binders. Determination of the elastic recovery for

Page 11

bituminous binders



Subsector B31: HEATING SYSTEMS IN BUILDINGS



ICS : 91.120.10, 91.140.10National Ref : ÖNORM H 7511Title : Inspection of heating systemsScope : This nationale standard contains a standardized procedure for the inspection of heating

systems according to the European Directive on the energy performance of buildings.


Subsector : B31 Registration Date : 2019-11-06Organization : NSAICountry : Ireland


ICS : 91.140.10National Ref : S.R. 50-4:20XXTitle : Building services Code of practice - Part 4: Domestic heat pump systems for dwellingsScope : S.R. 50-4 provides guidance for the design, installation and commissioning of residential heat

pumps systems in new and existing dwellings



Subsector B99: UNDETERMINED



ICS :65.020.20, 65.020.40, 91.010.99

National Ref : ÖNORM L 1121Title : Protection of groves and vegetation areas during construction worksScope : This ÖNORM is to be used for the protection of grove and vegetation areas during building

measures. The grove and vegetation areas to be preserved shall be determined in agreement with the owner of the trees and vegetation areas; for these the specified protection areas and protective measures apply.

Page 12


Subsector : B99 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS : 65.020.40National Ref : DIN 18918Title : Vegetation technology in landscaping - Biological methods of site stabilization -

Stabilization by seeding and planting, stabilization by means of living plant material, dead material and building elements, combined construction methods


Subsector : B99 Registration Date : 2019-11-29Organization : BSICountry : United Kingdom


ICS :National Ref : BS 1722-18Title : Fences. Specification for free-standing temporary steel mesh perimeter fencing panels


Subsector : B99 Registration Date : 2019-11-06Organization : SNCountry : Norway

Project ID : NOT19012/0001 Project Established

ICS : 91.010.30National Ref : NS 3457-7Title : Classification of construction works — Part 7: Identification in digital models and labeling

in buildingScope : Framework for coding components in digital models and for labeling components in physical

buildings




ICS : 91.010.30National Ref : NS 3457-8

Page 13

Title : Classification of construction works — Part 8: Component codes in buildingsScope : This standard gives a classification of components in buildings




ICS : 91.010.01National Ref : NS 8360-1Title : BIM objects — Part 1: Model practice, naming, type encoding and properties Scope : This standard gives a specification of good model practice, naming, type encoding and

properties




ICS : 91.010.01National Ref : NS 8360-2Title : BIM objects — Part 2: Use of multidisciplinary marking system (TFM) in BIMScope : This standard describes how to use the multidisciplinary marking system (TFM) in BIM




ICS : 91.010.01National Ref : NS 8360-3Title : BIM objects — Part 3: Management, operation, maintenance and development (FDVU) in

BIMScope : This standard describes how to use document management, operation, maintenance and

development (FDVU) in BIM


Subsector : B99 Registration Date : 2019-11-06Organization : SNCountry : NorwayProject ID : NOT19017/0001 Project

Page 14

EstablishedICS : 91.010.01National Ref : NS 8360-4Title : BIM objects — Part 4: Energy consumption simulation in BIMScope : This standard describes how to facilitate BIM models for energy consumption simulations



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 16Subsector C01: Food products

Subsector : C01 Registration Date : 2019-11-28Organization : UNICountry : Italy


ICS : 67.200.10National Ref : UNI1607058Title : Animal and vegetable oils and fats and derived products - Refined oil obtained from

kernel of walnut fruit Juglans regia L. - Characteristics and analytical methodsScope : This standard specifies the characteristics and analytical methods of refined oil obtained

from kernel of walnut (Juglans regia L.), for use in food.


Subsector : C01 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS :National Ref : 05702267Title : Fundamentals for detection and determination of microorganisms in foodstuffs with

impedance-method



Subsector C02: PAINTS AND RELATED PRODUCTS



ICS :National Ref : 00201042Title : Paints and varnishes - Electro-deposition paints - Part 15: Permeate residue




ICS :National Ref : 00201043Title : Paints and varnishes - Electro-deposition paints - Part 16: Pigment-binder ratio

Page 17


Subsector : C02 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-29


ICS :National Ref : PNE 48316Title : Paint and varnishes. High performance corrosion resistance decorative solvent-borne

coatingsScope : This standard defines the requirements to be met by a high performance corrosion

protection decorative solvent-borne coating which is applied over metal substrates in the decorative market, and which is applied on buildings, their trim and fittings and related structureswithpurposesdecorative,functionalandprotective.UNE48316onlytakesintoaccountthecorrosionprotectionofdecorativecoatings.Thisstandarddoesnotapplytootherprotectioncoatingssuchas:-againstmicroorganisms(algae,fungi,bacteria)-againstchemicalagents(acids,alkalies,organicsolvents,gases)-againstmechanicaleffects(abrasion)-againstfireThisstandarddoesnotapplytootherkindofcoatingssuchas:-podwercoatingmaterial-curingovencoatings- coatings with dry film thickness over 2 mm

Relatedness :National : REV/AMD UNE 48316:2014, UNE 48316:2014/1M:2015


Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2019-11-01Organization : ASRO Draft Issue Date : 2020-07-01Country : Romania Latest Date for Comments : 2020-08-31


ICS : 65.020.01National Ref : SR 13595:2020Title : Organicfarming-

Requirements and recommendations for the exploitation of soil and climatic conditions, biodiversity and the structure of growing areas and/or spontaneous flora.

Scope : Requirements and recommendations for the exploitation of soil and climatic conditions, biodiversity and the structure of growing areas and/or spontaneous flora.

Relatedness :National : REV/AMD ----

Page 18



ICS :National Ref : 06235766Title : Fuels for vegetable oil compatible combustion engines - Fuel from rapeseed oil -

Requirements and test methods




ICS :National Ref : 06235767Title : Fuels for vegetable oil compatible combustion engines - Fuel from vegetable oil -

Requirements and test methods



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 20Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS :National Ref : 04300928Title : Characters in Unicode for the electronic processing of names and data exchange in

Europe; with digital attachment



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2019-11-29Organization : SIS Draft Issue Date : 2019-11-29Country : Sweden Latest Date for Comments : 2020-02-14


ICS : 35.240.90National Ref : 12000Title : Interface for informatin exchange between school management processesScope : Denna standard anger krav på datautbytet inom skolväsendet mellan följande processer och

från följande processer till andra processer:


Subsector : F12 Registration Date : 2019-11-29Organization : SISCountry : Sweden


ICS : 35.240.99National Ref :Title : Communication protocols for surveillance and location purposes Scope : This document contains a basic specification on requirements for the communications

protocol. It is intended for surveillance, security and locating purposes in semi-autonomous mobile applications. The protocol is communication techniques agnostic.



Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2019-11-25Organization : ASICountry : AustriaProject ID : 00027774/0001 Project

Page 21

EstablishedICS : 03.180, 19.100National Ref : ÖNORM M 3042Title : Qualification, certification, authorization and approval of non-destructive testing

supervisors in accordance with ÖNORM EN ISO 9712, UIC Code 960 V, ÖNORM EN 4179 and NAS 410

Scope : This ÖNORM defines the framework for the structure, the procedure, and the supervision of qualification examinations of levels 1 to 3 in accordance with ÖNORM EN ISO 9712, UIC-Kodex 960 V, ÖNORM EN 4179 und NAS 410. It defines a uniform mode of procedure for the grading of the examination and its documentation, including the issuing of the certificate for NDT personnel.




ICS :National Ref : 06235291Title : Non-destructive testing - Radiation protection rules for the technical application of X-ray

equipment up to 1 MV - Part 3: Formulas and diagrams for the calculation of radiation protection for X-ray equipment up to 600 kV




ICS :National Ref : 06235293Title : Non-destructive testing - Radiation protection rules for the technical application of sealed

radioactive sources - Part 4: Construction and testing of mobile apparatus for gamma-radiography



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2019-11-28Organization : UNICountry : Italy


ICS : 03.060National Ref : UNI1606797Title : Financial education of citizens - Service requirements

Page 22

Scope : This standard gives indication about design, achievement, supply and evaluation of financial education. This standard establishes terms, objectives, classification, typologies, contents and priorities, modes and minimum requirements in order to fully reach the scope in coherence with UNI ISO 22222:2008 and with the current standardisation activity.

Relatedness :National : REV/AMD UNI 11402:2011


** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 24Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS :National Ref : 04201101Title : Hardware for furniture - Terms for furniture fittings - Castors and glides



Subsector H23: LADDERS

Subsector : H23 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS : 97.145National Ref : DIN 4567-1Title : Ladders for special professional use - Part 1: Ladders for fruit-trees made of wood or

aluminium



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 26Subsector I04: ROLLING BEARINGS

Subsector : I04 Registration Date : 2019-11-25Organization : ASICountry : Austria


ICS : 21.100.20National Ref : ÖNOMR M 6320-1 Beiblatt 1Title : Load carrying capacity of rolling bearings - Part 1: Calculation methods of rotating rolling

bearings - Supplement 1: Explanatory notes on the calculation method of static load carrying capacity

Scope : This supplement contains additional background information on the derivation of formulas with factors specified in ÖNORM M 6320-1.


Subsector : I04 Registration Date : 2019-11-26Organization : AFNORCountry : France


ICS :National Ref : PR NF E 22-057-1Title : Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 1 :

general



Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2019-11-14Organization : LVS Draft Issue Date : 2019-11-15Country : Latvia Latest Date for Comments : 2020-01-15


ICS : 23.020.10National Ref : prLVS 1058Title : Overground vertical steel tanks with flat floor. Technical examination of existing tanksScope : Procedures for technical inspection of used overground vertical flat floor steel tanks with the

purpose to determine risk factors for these devices and effects on the safe use to evaluate their further usabilit



Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2019-11-28Organization : UNI

Page 27

Country : Italy


ICS : 65.060.40National Ref : UNI1607028Title : Equipment for crop protection - Method for measurement of potential spray drift from

orchard sprayers by the use of a test benchScope : the draft defines the test method to measure the deposit on the ground of the drops

generated by sprayers for bush and tree crops. The measurement of the deposit gives the value of the potential drift generated by the sprayers. This allows the comparison of both different types of sprayers and of different configurations of the same sprayer.



Subsector I31: VALVES

Subsector : I31 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-29


ICS :National Ref : PNE 60719:2017/1MTitle : Fittings for hand operated metallic valves for installations using gaseous fuels.Scope : This standard establishes the dimensions of those fittings needed for the connection of

metallic valves and other elements of the gas receiving installations.

Relatedness :National : REV/AMD UNE 60719:2017


Subsector I40: INDUSTRIAL PIPING NETWORKS

Subsector : I40 Registration Date : 2019-11-27Organization : LVS Draft Issue Date : 2019-11-28Country : Latvia Latest Date for Comments : 2020-01-28


ICS : 23.040.01National Ref : prLVS 1054Title : Water supply and sewage systems, heating systems and natural gas systems with

pressure up to 1.6 MPa (16 BAR). Documentation content and proceesing of construction design

Scope : Standard defines common principles and requirements for documentation content and proceesing of construction design for water supply and sewage systems, heating systems and natural gas systems with pressure up to 1.6 MPa (16 BAR)

Relatedness :National : REV/AMD LVS 1054:2018


** End of Sector **




Sector M : METALLIC MATERIALS


Page 29Subsector M05: WELDING

Subsector : M05 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS :National Ref : 09201076Title : Welding - Welding of Plastics - Processes



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 31Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2019-11-25Organization : BDS Draft Issue Date : 2019-11-29Country : Bulgaria Latest Date for Comments : 2020-01-29

Project ID : BG067006/0001 Draft for public enquiry

ICS : 75.080National Ref : prBDS 1766Title : Petroleum products - Determination of the specific viscosity by Engler viscometerScope : This document describes a procedure for determination the specific viscosity of petroleum

products by Engler viscometer. The method is applicable to petroleum products in a continuous stream under strictly controlled conditions during the determination and have a viscosityatleast1,2°Е.

Relatedness :National : REV/AMD BDS 1766:1974International : Not Equivalent to ASTM D1665



ICS : 75.080National Ref : prBDS 5738Title : Petroleum products - Determination of the dropping point by Ubbelohde Scope : This document describes a method for determination of the dropping point and the flow

point of the solid and semi-solid petroleum products.

Relatedness :National : REV/AMD BDS 5738:1974



ICS : 75.080National Ref : prBDS 5747Title : Petroleum products - Test for corrosion effect on metalsScope : This document describes a procedure for determination the corrosion effect on metals of

lubricating oils, lubricating grease and other petroleum products.

Relatedness :National : REV/AMD prBDS 5747:1984


Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2019-11-19Organization : DINCountry : GermanyProject ID : 10600661/0001 Project

Page 32

EstablishedICS :National Ref : 10600661Title : Spacer textiles - Determination of air resistance



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-19


ICS :National Ref : PNE 53331Title : Plastics. Unplastized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl

chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under external loads.

Scope : The purpose of this standard is to establish the criteria for testing of PVC-U, PVC-O, PE and PP tubes, compact and of uniform density, in the section of the tube, to be used in buried pipes,withorwithoutpressure,subjectedtoexternalloads.This standard covers the field of application of buried facilities, including the different types of ditch, pipe arrangement and supports most commonly used for plastic materials. When the pipe is installed on discontinuous supports, hung or in other special conditions, appropriatecalculationmethodsshallbeused,dependingontheexpectedefforts.Whenapplyingthisstandard,aseriesofparametersandvaluesthathavebeenempiricallyestablished shall be selected, so that the results obtained by calculation coincide substantially with those obtained in the tests carried out, with the designer choosing the appropriateones.Thestructureofthestandardisasfollows:Once the appropriate pipe for the considered conduit has been selected, as well as the type and support of the trench, the factors acting on the pipe are determined, due to external and internal loads, analyzing whether the deformation of the pipe is admissible according to the established limit of 5%. In positive case, the calculation of the solicitations to which the conduction is subjected is continued, determining the maximum tangential stresses of the material, which shall exceed the established safety criteria, as well as those related to the critical collapse pressure, the pressure water outside and the simultaneous action of both. If the deformation exceeds 5%, another assumption should be considered, modifying the characteristicsoftheinstallationorthetypeoftube.Annex K gives a list, not exhaustive, of the documents describing the pipes to which this standard applies.

Relatedness :National : REV/AMD UNE 53331:1997 IN, UNE 53331:2002 IN ERRATUM


Page 33Subsector N21: GASEOUS FUELS AND COMBUSTIBLE GAS

Subsector : N21 (Secondary Subsector)

Registration Date : 2019-11-28

Organization : UNICountry : Italy


ICS : 75.060National Ref : UNI1607079Title : Biomethane for direct use in automotiveScope : This technical report gives indications for first experiences of biomethane direct use in

automotive

Relatedness :National : REV/AMD UNI/TR 11677:2017


** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 35Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-29


ICS :National Ref : PNE 100718Title : Procedure for determining the category of ODA for air conditioning projects.Scope : The aim of this standard is to describe a methodology for determining the quality of outdoor

air(ODA)indevelopingprojectsofairconditioning.The scope of the standard is air conditioning. projects under the Spanish regulation of thermal installations in buildings.



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2019-11-26Organization : AFNORCountry : France


ICS :National Ref : PR NF T90-101Title : Water quality - Determination of chemical oxygen demand (COD)



Subsector S18: STERILIZATION OF EQUIPMENT

Subsector : S18 Registration Date : 2019-11-29Organization : BSICountry : United Kingdom


ICS :National Ref : BS 3970Title : Sterilizing and disinfecting equipment for medical products. Specification



Subsector S23: PERSONAL & PROPERTY PROTECTION AGAINST AGGRESSION/ BURGLARY

Subsector : S23 Registration Date : 2019-11-29

Page 36

Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7582Title : Code of practice for reconditioning of used safes



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2019-11-25Organization : ASICountry : Austria


ICS : 13.080.20National Ref : ÖNORM L 1069Title : Physical analysis of soils - Determination of field capacity of soils (field testing)Scope : This ÖNORM shall be used to determine the field capacity of frost-free soils in the area of

the unsaturated Zone.




ICS : 13.080.20National Ref : ÖNORM L 1072Title : Physical analyses of soils - Determination of aggregate stability by the method of wet

sievingScope : This ÖNORM specifies a method for determining the aggregate stability of air-dry soils. The

process is a wet sieving process which is carried out on the dry sieved sieve fraction 1-2 mm.




ICS : 65.020.40National Ref : ÖNORM L 1211Title : Soil protection during planning and ground operations especially during construction

projectsScope : This ÖNORM sets the requirements for on-site soil protection in the context of larger

Page 37

construction projects (greater than 2,500 m2 or 2,000 tonnes). Its purpose is to minimize losses and burdens on the soil and to maintain or restore the natural soil functions.




ICS : 13.080.20National Ref : ÖNORM L 1071Title : Physical analysis of soils - Determination of soil colourScope : This ÖNORM is to be used for the determination of the soil color.


Subsector : S24 Registration Date : 2019-11-07Organization : NENCountry : Netherlands


ICS :13.080.05, 13.080.20, 13.080.40

National Ref : NEN 5766:2019 Concept nlTitle : Soil - Installation of wells for environmental researchScope : This standard describes the installation of observation wells in previously bored holes or by

pushing them directly into the soil, as well as the installation of several observation wells in an observation post and the determination with various means of the hydraulic heads of groundwater in the saturated zone, at one or more predeterminated depths. The standard applies to hydrological examination in the saturated zone of the soil.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 39Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2019-11-29Organization : BSICountry : United Kingdom


ICS :National Ref : BS 6349-1-4Title : Maritime works. Part 1-4: General. Code of practice for materials


Subsector : T01 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-19


ICS :National Ref : PNE 27800Title : Passenger boarding bridges for cruisses and ferriesScope : This standard specifies the technical requirements for minimizing the hazards that may

appear during the commissioning, function and maintenance of passenger boarding bridges for cruises and ferries, when used as intended.



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2019-11-26Organization : AFNORCountry : France


ICS :National Ref : PR NF L09-752Title : Aerospace series - Metallic materials - Codes for standard item part numbers

Relatedness :National : REV/AMD NF L09-752 2004-09-01



ICS :National Ref : NF L 06-394Title : Aerospace series ¿ Weldments and brazements for aerospace structures - Assembly of

metallic materials welded by TIG method or PLASMA - Quality of weldments

Page 40


Subsector : T02 Registration Date : 2019-11-19Organization : DINCountry : Germany


ICS :National Ref : 13116376Title : Aerospace series - Wire thread inserts, screw-locking, copper alloy - Class: 490 MPa/300

°C; Text in German and English




ICS :National Ref : 13116379Title : Aerospace series - Countersunk head bolts, close tolerance, with internal offset cruciform

ribbed drive and MJ thread, short thread length, titanium alloy - Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English



Subsector T03: ROAD VEHICLES



ICS :National Ref : PR NF R15-602-6Title : Road vehicles - Test methods of cooling fluids - Part 6: compatibility with hard water




ICS :National Ref : PR NF R15-602-5

Page 41

Title : Road vehicles - Test methods of cooling fluids - Part 5: Measurement of the foaming tendencies


Subsector : T03 Registration Date : 2019-11-28Organization : UNICountry : Italy


ICS : 75.060National Ref : UNI1607079Title : Biomethane for direct use in automotiveScope : This technical report gives indications for first experiences of biomethane direct use in

automotive

Relatedness :National : REV/AMD UNI/TR 11677:2017


Subsector T14: PACKAGING



ICS :National Ref : 11501248Title : Packaging - Attributes - Part 1: Attributes for packaging made of corrugated fibreboard



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2019-11-29Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8693Title : CodeofPracticefortheassessment,strengtheningandrepairof

masonryparapets for bridges and highway structures



** End of Sector **




Sector X : UNDETERMINED STANDARDIZATION AREA


Page 43Subsector X01: UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL)

Subsector : X01 Registration Date : 2019-11-01Organization : LVS Draft Issue Date : 2019-11-04Country : Latvia Latest Date for Comments : 2020-01-06


ICS : 13.220.10National Ref : prLVS 187Title : National requirements for the design, installation, commissioning and use of fire hydrantsScope : This standard is intended to be applied to hydrants in the territory of the Republic of Latvia.

The standard provides requirements for the installation of hydrants and guidelines for their verification.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC

November 2019

Issued on : 6 December 2019

Page 1

Information Procedure on Standards

Notifications registered at CCMC during November 2019

Sector W : ELECTRICAL ENGINEERING

Register issued on : 6 December 2019

Page 2Subsector W08: ELECTRIC CABLES

Subsector : W08 Registration Date : 2019-11-19Organization : UNECountry : Spain Latest Date for Comments : 2019-12-09


ICS :National Ref : PNE 21161:2017/1MTitle : Cables for AGL constant current series circuits.Scope : Amendment of UNE 21161: 2017, tables 5 and 7

Relatedness :National : REV/AMD UNE 21161:2017


** End of Sector **

Page 3

Information Procedure on Standards

Notifications registered at CCMC during November 2019

Sector X : UNDETERMINED STANDARDIZATION AREA

Register issued on : 6 December 2019

Page 4Subsector X01: UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL)

Subsector : X01 Registration Date : 2019-11-01Organization : LVS Draft Issue Date : 2019-11-04Country : Latvia Latest Date for Comments : 2020-01-06


ICS : 13.220.10National Ref : prLVS 187Title : National requirements for the design, installation, commissioning and use of fire hydrantsScope : This standard is intended to be applied to hydrants in the territory of the Republic of Latvia.

The standard provides requirements for the installation of hydrants and guidelines for their verification.



** End of Sector **

List of Subsectors covering work items in CENELEC’s field of activity

(version 2009-05-15)

(Rows or committees shaded in blue indicate changes compared to the last list of subsectors )

U GENERAL ELECTROTECHNICAL STANDARDS

Title IEC TC CLC TC

U01 INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS

IEC TC 3 IEC SC 3C IEC SC 3D

U02 ALUMINIUM CONDUCTORS. IEC TC 7

U03 SYSTEM ASPECTS FOR ELECTRICAL ENERGY SUPPLY IEC TC 8 CLC TC 8X

U04 ELECTRICAL FLUIDS. IEC TC 10 BTTF 116-1

U05 ELECTRICAL INSULATING MATERIALS AND SYSTEMS. IEC TC 15 IEC TC112

U06 MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION MARKINGS.

IEC TC 16

U07 LETTER SYMBOLS FOR ELECTROTECHNOLOGY. IEC TC 25

U08 ELECTRIC WELDING. IEC TC 26 CLC TC 26A CLC TC 26B

U09 INSULATION CO-ORDINATION. IEC TC 28 IEC TC 109

U10 HIGH-VOLTAGE TESTING. IEC TC 42

U11 ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT

IEC TC 89 IEC TC 104

U12 RELIABILITY. IEC TC 56

U15 MAGNETIC ALLOYS. IEC TC 68

U16 PROTECTION BY ENCLOSURES. IEC TC 70

U17 SHORT CIRCUIT CURRENTS. IEC TC 73

U18 ENVIRONMENTAL STANDARDIZATION - GENERAL IEC TC 111 CLC TC 111X

U19 RADIO INTERFERENCE, EMC IEC TC 77 + SCs CISPR + SCs

CLC TC 210

U20 SUPERCONDUCTIVITY IEC TC 90

U21 NANOTECHNOLOGY IEC TC 113

U91 QUALITY ASSURANCE ISO TC 176 BTTF 76-3

U92 ADVANCED CERAMICS IEC TC *

U93 ELECTROMAGNETIC HAZARDS IEC TC 106 CLC TC 106X

U94 PUBLIC PROCUREMENT MATTERS CLC TC 218

U95 ENVIRONMENTAL MATTERS BTWG 132-3

U96 USABILITY & SAFETY OF ELECTRICAL PRODUCTS WITH REFERENCE TO PEOPLE WITH SPECIAL NEEDS

BTWG 101-5

U99 UNDETERMINED. (ex: terminology) IEC TC 1

V ELECTRONIC ENGINEERING

Title IEC TC CLC TC

V01 RADIOCOMMUNICATIONS AND CABLE NETWORKS IEC TC 103 CLC TC 209

V02 ELECTRICAL MEASURING EQUIPMENT. IEC TC 13 CLC TC 13 BTWG 105-2

V03 ELECTROACOUSTICS AND ULTRASONICS. IEC TC 29 IEC TC 87

V04 INSTRUMENT TRANSFORMERS. IEC TC 38 CLC TC 38X

V05 ELECTRONIC TUBES. IEC TC 39

V06 CAPACITORS AND RESISTORS. IEC TC 40 CLC TC 40XA CLC TC 40XB

V07 NUCLEAR INSTRUMENTATION. IEC TC 45 IEC SC 45A IEC SC 45B

CLC TC 45AX CLC TC45B

V08 CABLES AND WIRES FOR TELECOMMUNICATIONS IEC TC 46 + SCs CLC TC 46X + SCs

V09 SEMICONDUCTORS. IEC TC 47 + SCs IEC TC 110

V10 ELECTROMECHANICAL COMPONENTS. IEC TC 48 + SCs IEC TC 91

BTWG 117-1

V11 PIEZOELECTRIC DEVICES. IEC TC 49

V12 MAGNETIC COMPONENTS. IEC TC 51

V13 PRINTED CIRCUITS.

V15 ELECTROMEDICAL EQUIPMENT. IEC TC 62 + SCs CLC TC 62

V16 PROCESS CONTROL. IEC TC 65 + SCs CLC TC 65CX BTWG 109-2

V17 ELECTRONIC MEASURING EQUIPMENT. IEC TC 66 IEC TC 85

BTTF126-1

V18 AUTOMATIC CONTROLS. IEC TC 72 CLC TC 72

V19 SAFETY OF DATA PROCESSING EQUIPMENT. Merged into V24

V20 RADIATION SAFETY AND LASER EQUIPMENT. IEC TC 76 CLC TC 76

V21 ALARM SYSTEMS. IEC TC 79 CLC TC 79

V22 NAVIGATIONAL INSTRUMENTS. IEC TC 80

V23 PHOTOVOLTAIC SYSTEMS. IEC TC 82 CLC TC 82

V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

IEC TC 100 + TAs

IEC TC 108

JTC1/25 & 26

CLC TC 108X CLC TC 205 + SC CLC TC 206 CLC TC 215 CLC/JTC 1

V27 AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

Merged with V24

V28 FIBRE OPTICS. IEC TC 86 + SCs

CLC TC 86A CLC TC 86BXA

V30 DESIGN AUTOMATION IEC TC 93

V31 SURFACE TRANSPORT ELECTROTECHNICAL SYSTEMS

BTTF 69-3

V32 AVIONICS IEC TC 107 CLC TC 107X

W ELECTRICAL ENGINEERING

Title IEC TC CLC TC

W01 ELECTRIC ROTATING MACHINES. IEC TC 2 CLC TC 2

W02 TURBINES: Hydraulic, steam, wind and marine energy IEC TC 4 IEC TC 5 IEC TC 88 IEC TC 114

CLC TC 88

W03 ELECTRIC TRACTION EQUIPMENT. IEC TC 9 CLC TC 9X + SCs

W04 OVERHEAD ELECTRIC LINES. IEC TC 11 CLC TC 11 BTTF 129-1 BTTF 132-1

W05 POWER TRANSFORMERS. IEC TC 14 CLC TC 14

W06 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17A IEC SC 17C

CLC TC 17AC

W07 ELECTRICAL INSTALLATIONS IN SHIPS. IEC TC 18 IEC SC 18A

W08 ELECTRIC CABLES. IEC TC 20 CLC TC 20

W09 SECONDARY BATTERIES. IEC TC 21 IEC SC 21A

CLC TC 21X

W10 POWER ELECTRONICS. IEC TC 22 + SCs CLC TC 22X

W11 ELECTRICAL ACCESSORIES. IEC TC 23 + SCs CLC TC 23BX CLC TC 23E CLC TC 213 BTWG 112-1 BTTF 129-2

W12 ELECTROHEAT. IEC TC 27

W13 EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. IEC TC 31 + SCs

IEC TC 101 CLC TC 31 + SCs

CLC TC 216

W14 FUSES. IEC TC 32 IEC SC 32A

W15 POWER CAPACITORS. IEC TC 33

W16 LAMP AND LUMINAIRES. IEC TC 34 + SCs

CLC TC 34Z

W17 PRIMARY BATTERIES. IEC TC 35

W18 INSULATORS. IEC TC 36 + SCs

CLC TC 36A

W19 SURGE ARRESTERS. IEC TC 37 + SCs

CLC TC 37A

W20 ELECTRICAL RELAYS. IEC TC 94 IEC TC 95

(CLC TC 94)1

W22 ELECTRICAL EQUIPMENT OF MACHINE TOOLS. IEC TC 44 CLC TC 44X

W23 WINDING WIRES. IEC TC 55 CLC TC 55

W24 TELECONTROL SYSTEMS. IEC TC 57

W25 DOMESTIC APPLIANCE PERFORMANCE. IEC TC 59 + SCs CLC TC 59X

W26 DOMESTIC ELECTRICAL APPLIANCES AND MOTOR-OPERATED ELECTRIC TOOLS

IEC TC 61 + SCs

TC 116 CLC TC 61 CLC TC 116 BTTF 128-1

W27 ELECTRICAL INSTALLATIONS IN BUILDINGS. IEC TC 64 CLC TC 64 BTTF 62-3

W28 ELECTRIC VEHICLES. IEC TC 69

W29 ELECTRICAL INSTALLATIONS FOR OUTDOOR SITES

W30 LIVE WORKING. IEC TC 78 CLC TC 78

W31 LIGHTNING PROTECTION. IEC TC 81 CLC TC 81X

W32 LOW-VOLTAGE POWER TRANSFORMERS. IEC TC 96

W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17B IEC SC 17D

CLC TC 17B (CLC TC 17D)

1

W34 LOW-VOLTAGE FUSES. IEC SC 32B IEC SC 32C

W35 SYSTEM ENGINEERING AND ERECTION OF ELECTRICAL POWER INSTALLATIONS

IEC TC 99 CLC TC 99X

W36 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES

IEC TC 97 CLC TC 97

W37 FUEL CELL TECHNOLOGIES IEC TC 105

W38 SAFETY OF ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT

CLC TC 204

W39 HIGH VOLTAGE DIRECT CURRENT (HVDC) TRANSMISSION TECHNOLOGY

IEC TC 115

Z IT MATTERS NOT COVERED BY OTHER SUBSECTORS

Z01 CENELEC/ETSI EMC conducted transmission networks JWG EMC

Z02 WORK IN THE FIELD OF ISO/IEC JTC 1 AND SUB-COMMITTEES JTC 1, except WG 25 & 26

1 Dormant

List of symbols typically used by National Committees for their national standards references

CLC REF

EN 55020:2002 EN 55020:2002/A1:2003 Draft Standards

AT ÖVE/ÖNORM EN 55020+A1+A2 ÖVE/ÖNORM EN 55020+A1+A2 E or ENTWURF

BE NBN EN 55020/1:2003 NBN EN 55020/1:2003 PR NBN

CH SN EN 55020:2002 SN EN 55020:2002/A1:2002

CY CYS EN 55020:2002 CYS EN 55020:2002-iss1

CZ CSN EN 55020 ED. 2 CSN EN 55020 ED. 2/A1

DE DIN EN 55020 (VDE 0872-20) DIN EN 55020 (VDE 0872-20) Reference of the future standard or work item number, ex: 02218905

DK DS/EN 55020:2005 DS/EN 55020/A1:2005 Reference of the future standard

EE EVS-EN 55020:2002 EVS-EN 55020:2003/A1:2003 Reference of the future standard

ES UNE-EN 55020:2004 UNE-EN 55020-A1:2004 PNE

FI SFS-EN 55020:2002 SFS-EN 55020:2000/A1:2003 Reference of the future standard

FR NF EN 55020 NF EN 55020/A1 PR NF

GB BS EN 55020:2002 BS EN 55020:2002+A1:2003 Reference of the future standard

GR ELOT EN 55020:2002 ELOT EN 55020/A1:2003 Reference of the future standard

HU MSZ EN 55020:2004 MSZ EN 55020:2004 PR I.S. or Reference of the future standard

IE I.S. EN 55020:2005 I.S. EN 55020/A1:2005

IS IST EN 55020:2002 IST EN 55020:2002/A1:2003

IT CEI EN 55020:2003 CEI EN 55020/A1:2003 Reference of the future standard

LT LST EN 55020+A1:2003 LST EN 55020+A1:2003

LU** EN 55020:2002 EN 55020:2002/A1:2003

LV LVS EN 55020:2002 LVS EN 55020:2002 /A1:2003

MT MSA EN 55020:2002 MSA EN 55020:2002/A1:2003

NL NEN-EN 55020:2002/C12:2005 NEN-EN 55020:2002/A1:2003/C11:2005 ONTWERP NEN

NO NEK EN 55020:2002 NEK EN 55020:2002/A1:2003

PL PN-EN 55020:2003 PN-EN 55020:2003/A1:2003

PT NP EN 55020:2002 NP EN 55020:2002/A1:2003 PR NP

RO SR EN 55020:2003 SR EN 55020:2003/A1:2004

SE SS-EN 55020 SS-EN 55020/A1:2003 Reference of the future standard

SI SIST EN 55020:2003 SIST EN 55020:2003/A1:2003

SK STN EN 55020:2002 STN EN 55020/A1:2003

** Luxembourg applies the CENELEC reference number without a national prefix

Documents

ΠΡΟΣ: Όλα τα Μέλη Σας επισυνάπτo · Title : Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel