ΠΡΟΣ: Όλα τα Μέλη · Title : Technical Surveyor's report on dwellings in preparation for sales Scope : This standard specifies minimum requirements for what a technical

Λευκωσία, 19 Απριλίου 2018

ΠΡΟΣ: Όλα τα Μέλη

Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ.

Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066 , Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: [email protected], Ιστοσελίδα:www.ccci.org.cy

mailto:[email protected]

mailto:[email protected]

http://www.ccci.org.cy/

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2018-03-01 to 2018-03-31

Register issued on : 2018-04-13

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A10: SERVICES OF REAL ESTATE AGENTS

Subsector : A10 Registration Date : 2018-03-13Organization : SNCountry : Norway

Project ID : NOT18003/0001 Draft for public enquiry

ICS : 91.010.30National Ref : NS 3600Title : Technical Surveyor's report on dwellings in preparation for salesScope : This standard specifies minimum requirements for what a technical condition analysis of an

individual dwelling should include to give the buyer and the seller correct information about the dwelling. The standard contains detailed lists of components to be inspected and criteria for classification of deviations from the reference condition.

Relatedness :National : New

** End of Subsector **

Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2018-03-09Organization : TSECountry : Turkey

Project ID : t0122258/0001 Project Established

ICS : 03.080.30National Ref :Title : Mehteran TeamScope : This standard covers the structure of the mehter teams and their costumes, equipment,

repertoire, training, walking and concert arrangements and the equipment to be used in the tuğ.


Subsector : A11 Registration Date : 2018-03-09Organization : TSECountry : Turkey


ICS : 03.080.30, 11.180.10National Ref :Title : Work places - Prosthetics - Orthotics manufacturing and fitting centers –General rules Scope : This standard, includes, rules for management structural properties, technical equipment

and personnel characteristics of Prosthetics - Orthotics manufacturing and fitting centers



Subsector A13: EXPERTISE SERVICES

Page 4

Subsector : A13 Registration Date : 2018-03-19Organization : SNV Draft Issue Date : 2018-03-15Country : Switzerland Latest Date for Comments : 2018-06-15

Project ID : CH180003/0001 Draft for public enquiry

ICS : 07.060National Ref : prSIA 106Title : Order for services and fees of geologists

Relatedness :National : REV/AMD SIA 106:2007


** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 6Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2018-03-16Organization : SIS Draft Issue Date : 2018-03-16Country : Sweden Latest Date for Comments : 2018-04-16

Project ID : 00003656/0001 Project Established

ICS : 13.220National Ref : 3656Title : Portable fire extinguishers — Maintenance and rechargingScope : Thisstandardhasbeencompletelyrevised.

Byportablefireextinguisher,thisstandardmeansextinguisherapprovedaccordingtoEN3.Provided that portable fire extinguishers are in working condition, they are an effective extinguishing tool. They are especially valuable in the early stages of the fire and can be used effectively by an untrained person. Portable fire extinguishers have a long service life, but it should be kept in mind that the functionality depends on the maintenance to ensure the immediate usefulness of the portable fire extinguishers. This Swedish standard specifies requirements for control and maintenance of portable fire extinguishers so that they can offerthesamefunctionaswhenmanufactured,deliveredandinstalled.This standard includes handheld extinguishers, regardless of location.


Subsector : B01 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : PR NF S61-213/CNTitle : Pillar fire hydrants - National addition to NF EN 14384:2006




ICS :National Ref : PR NF S 61-550Title : Firefighting and rescue service equipment - Special complementary provisions for

hydraulic platforms (HPs)


Subsector : B01 Registration Date : 2018-03-27Organization : AFNORCountry : FranceProject ID : 00207582/0001 Project

Page 7

EstablishedICS :National Ref : PR NF S61-211/CNTitle : Underground fire hydrants - National addition to NF EN 14339:2006


Subsector : B01 Registration Date : 2018-03-02Organization : PKNCountry : Poland


ICS : 13.220.50National Ref : prPN-B-02852Title : Fire protection in buildings -- Calculation of fire load and relative length of time of fireScope : The standard describes the calculation method of the fire load in buildings and landfills of

solid materials as well as calculation method of relative duration of fire


Subsector : B01 Registration Date : 2018-03-02Organization : PKNCountry : Poland


ICS : 13.220.20National Ref : prPN-B-02877-4Title : Fire protection in buildings -- Natural smoke and heat axhaust systems -- Principles of

designScope : The standard concerns the principles of designing natural smoke and and heat exhaust

ventilator. The standard specifies the rules for calculating the area of smoke vents and their arragement in the roofs of single-storey buildings and on the highest floors of multi-storey buildings. The standard does not apply to the design of powered smoke and heat exhaust systems.


Subsector : B01 Registration Date : 2018-03-30Organization : TSECountry : Turkey


ICS : 13.220.20National Ref :Title : Fire safety measures in public places and buildings - Part 7: Industrial constructionsScope : This standard specify all kinds of products that are processed in the factory and processing

and assembly, mixing, cleaning, washing, packaging, storage, distribution and repair works and raw materials and semi-finished products are processed into finished products; manufacturing plants, food processing plants, filling and discharging facilities, dry cleaning facilities, mining processing facilities, raffiners, etc., to be used in manufacturing plants,

Page 8

factories, workshops, printing houses, locations.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2018-03-09Organization : UNMZ Draft Issue Date : 2017-12-10Country : Czech Republic Latest Date for Comments : 2018-01-30


ICS :National Ref :Title :

Bitumen and bituminous binders – Modified bitumens – Part 3: Special polymer modified bitumens

Scope : This standard contains the requirements of the Czech Republic for modified asphalt binders usedinroadconstruction.Thisstandardconsistsofthreeparts:Part1:PolymersmodifiedbitumensPart2:CrumbrubbermodifiedbitumensPart3:SpecialpolymermodifiedbitumenČSN657222-3specifiestypesofspecialpolymermodifiedbitumens.Aninternationalstandard has not yet been developed for this part , only the draft CEN / TC 336 / N 689 that has been taken into account.


Subsector : B02 Registration Date : 2018-03-09Organization : NBNCountry : Belgium

Project ID : BE664056/0001 Project Established

ICS :13.220.50, 91.010.30, 91.080.30

National Ref : prNBN EN 1996-1-2 ANB:2018Title : Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire

design - National annex

Relatedness :National : REV/AMD NBN EN 1996-1-2 ANB:2012European : Not Equivalent to EN 1996-1-2:2005


Subsector B03: CONCRETE

Subsector : B03 (Secondary Subsector)

Registration Date : 2018-03-30

Organization : TSECountry : Turkey


Page 9

ICS :91.100.10, 91.100.15, 91.100.30

National Ref :Title : Tests for geometrical properties of aggregates – Quality assessment of fine aggregate

(sand) or very fine materials (passing 0,063 sieve) – Rapid determination of the methylene blue value by using a colorimeter

Scope : This standard provides a rapid test method to determine the amount of methylene blue adsorbed by a part of fine aggregate or mineral filler and can be used both in the laboratory and in the field.

Relatedness :National : NewInternational : Modified ASTM C1777:2015


Subsector B08: DOORS AND WINDOWS



ICS :National Ref : PR NF P23-309Title : Wood-aluminum composite joinery ¿ Technical specifications of windows, door height

windows, external doors and screens


Subsector : B08 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 00518206Title : Interior doors made from wood and wood-based panels - Part 1: Door leaves; Concepts,

sizes, requirements




ICS :National Ref : 00518207Title : Interior doors made from wood and wood-based panels - Part 2: Door crozes; Concepts,

sizes, installation


Page 10

Subsector : B08 Registration Date : 2018-03-28Organization : UNICountry : Italy


ICS : 03.180, 91.060.50National Ref : UNI1604338Title : Installation of doors and windows – Part 3: Requirements for provide courses of non-

formal education and training to specialist in installation of doors and windowsScope : This standard defines minimal requirements for providing a non-formal training course

about installation of doors and windows according to UNI ISO 29990. This standard applies to training activity for specialist in installation of doors and windows according to UNI 11673-2, Clause 1.



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2018-03-22Organization : EVSCountry : Estonia


ICS : 27.220, 91.120.10National Ref : prEVS 860-7Title : Thermal insulation of technical equipment - Part 7: Insulation of pipes, vessels and

equipment - Covering materials and support structureScope : This standard is a part of Thermal insulation of technical equipment series, which has been

composed to engineers, contractors and customers. This standard presents the most common covering materials and support structures for insulation works, as well as their markings and technical properties.


Subsector : B09 Registration Date : 2018-03-15Organization : UNECountry : Spain Latest Date for Comments : 2018-04-24

Project ID : P0049810/0001 Draft for public enquiry

ICS :National Ref : PNE 92325Title : Thermal insulation products and glass enclosures for buildings. Installation control.Scope : This standard collects the steps to follow for the control of the insulation, and is organized

into:project,installationworkandfinishedwork.This standard aims to provide procedures for project control, installation work and finished work that serve to assist the compliance of the CTE DB-HE1. These procedures can be used by prescribers or designers, control entities, insulation installers, and those responsible for buildingconstruction.

Page 11

This standard includes in its annexes a few checklists intended to help verify and check that insulationhasbeeninstalledcorrectlyinconstruction.Annex M contains a list of verification for the control of the installation of windows and glass enclosures.Note: the technical Committee CTN 85 has published the standard UNE 85219, "Windows. Installationonsite",whichincludesspecificinformationfortheinstallationofwindows.

Relatedness :National : REV/AMD UNE 92325:2016


Subsector B12: MASONRY



ICS :National Ref : 00518250Title : Testing of mortars containing mineral binders - Hardened mortars - Part 4: Determination

of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test




ICS :National Ref : 00518251Title : Testing of mortars with mineral binders - Fresh mortars - Part 7: Determination of the

water retention value by the filter plate method




ICS :National Ref : 00518252Title : Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination

of the mortar compressive strength in the bed joint

Relatedness :

Page 12

National : New

Subsector : B12 (Secondary Subsector)




ICS :91.100.10, 91.100.15, 91.100.30






Subsector B15: SANITARY APPLIANCES



ICS :National Ref : PR NF D12-101Title : Sanitary appliances - Sanitary ceramic WC pans




ICS :National Ref : 00300674Title : Proportional Flow Controller for use in drinking water installations - Requirements and

tests



Subsector B20: DRAINAGE EQUIPMENT

Page 13



ICS :National Ref : 11904287Title : Plans for Public Utilities, Water Resources and Long-distance Lines - Teil 4: Drain and

sewer systems outside buildings



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2018-03-02Organization : EVSCountry : Estonia


ICS : 93.080.20National Ref : prEVS 901-3Title : Road construction. Part 3: Bituminous mixturesScope : This is national implementation standard for bituminous mixtures standard series EN 13108

(EN 13108-1:2016, EN 13108-2:2016, EN 13108-3:2016, EN 13108-4:2016, EN 13108-5:2016, EN 13108-6:2016, EN 13108-7:2016, EN 13108-8:2016, EN 13108-20:2016 and EN 13108-21:2016). This standard gives characteristics and requirement levels of aggregates for bituminous mixtures and defines national requirements which supplement the European standard and which are not in conflict with the requirements in the European standard. The national standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in Estonia.



Subsector B27: WATERPROOFING MATERIALS



ICS :National Ref : 00518253Title : Waterproofing of elements in contact with soil - Part 1: Requirements and principles for

design and execution; Amendment A1


Subsector : B27 Registration Date : 2018-03-19

Page 14

Organization : DINCountry : Germany


ICS :National Ref : 00518254Title : Waterproofing of elements in contact with soil - Part 3: Waterproofing with liquid-applied

waterproofing materials




ICS :National Ref : 00518255Title : Waterproofing of concrete areas trafficable by vehicles - Part 3: Waterproofing

comprising two layers of polymerized bitumen sheeting; Amendment A1




ICS :National Ref : 00518267Title : Waterproofing of concrete areas trafficable by vehicles - Part 5: Waterproofing

comprising a layer of polymerized bitumen sheet in conjunction with a single synthetic or elastomer sheeting; Amendment A1



Project ID : tst00113/0002 Project Established

ICS : 75.140National Ref :Title : Roofing - Bitumen emulsions used as a protective coating -SpecificationsScope : This standard covers bitumen emulsions suitable for use as protective coating on terrace

roofs and other open surfaces with a slope of less than 4% or less than 42 mm / m

Relatedness :National : NewInternational : Modified ASTM D 1227-95:1995


Page 15Subsector B29: AGGREGATES



ICS :91.100.10, 91.100.15, 91.100.30






Subsector B30: FLOOR AND SURFACING



ICS :National Ref : 00518269Title : Sports grounds - Part 5: Tamped areas


Subsector : B30 Registration Date : 2018-03-28Organization : UNICountry : Italy


ICS : 71.100.50, 79.020National Ref : UNI1604340Title : Wood finishes - Surface finishes for wood doors and windows - Part 2: Minimum

requirements for degradation resistance of wood substrates and painting cycles for external doors and windows made of wood and other materials

Scope : Thestandarddefines:- characteristics of raw materials and finished products affecting the degradation of wood substrates and painting cycles for doors and windows made of mixed materials, for example wood-aluminum,wood-plasticorwood-iron,tobeusedinexternalenvironments;- methods for the determination and/or evaluation of the characteristics in accordance with normativereferences,ifany;-minimumrequirementsrelatedtoeachcharacteristic.The standard does not apply to doors and windows entirely made of wood.

Relatedness :

Page 16

National : New

Subsector : B30 Registration Date : 2018-03-15Organization : UNECountry : Spain Latest Date for Comments : 2018-04-24


ICS :National Ref : PNE 147301Title : Sport surfaces of artificial turf for the practice of paddle. RequirementsScope : The objective of this standard is to serve as a reference document for the construction,

inspection and maintenance of surfaces of artificial grass destined to the practice of the paddle.This Spanish standard includes laboratory tests, in situ tests and product identification tests for this type of sports surface, so as to ensure that the sports performance properties evaluated on the product in the laboratory are reproducible at the facility and identified with the data sheets declared by the manufacturers of the material.de in the construction of football, rugby and golf sports surfaces of natural grass outdoor with a regular use.



Subsector B99: UNDETERMINED



ICS :National Ref : 00518185Title : Construction of schools - Constructional requirements for accident prevention




ICS :National Ref : 00518223Title : Playgrounds and outdoor play areas - Requirements on planning, building and operation


Subsector : B99 Registration Date : 2018-03-19Organization : DIN

Page 17

Country : Germany


ICS :National Ref : 00518256Title : Waterproofing for indoor applications - Part 5: Waterproofing with waterproofing materials

in sheet form in conjunction with tiles; Amendment A1



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 19Subsector C01: Food products

Subsector : C01 Registration Date : 2018-03-28Organization : UNICountry : Italy


ICS : 67.100.10National Ref : UNI1604278Title : Method for the determination of rind content in grated long ripened hard cheese

produced with raw bovine milkScope : This standard describes the method for measuring the content of rind in grated cheese,

using capillary electrophoresis (CZE). This standard is applicable to grated hard cheese, producedwithrawmilkand ripened more than 9 months. The determination is based on the ratio between alfa–s2’ casein and the peptide (f 88-199) of alfa-s1 casein that, during ripening, undergo a different rate of accumulation in rind and in cheese.


Subsector : C01 Registration Date : 2018-03-28Organization : UNICountry : Italy


ICS : 67.100.10National Ref : UNI1604279Title : Extraction method for the analysis of lactose, glucose and galactose in soft, fresh and

blue cheesesScope : This technical specification describes the extraction procedure for analyzing the content of

lactose, glucose and galactose in fresh, soft and blue cheeses. This technical specification widens the application field of UNI/TS 11687 that was restricted to hard and long ripened cheese. Similarly to UNI/TS 11687, it is applicable to cheese in which both the reduction of lactose and the further metabolization of glucose and galactose, naturally occurred during the technological process by the action of microflora. It is not applicable to dairy products in which the lactose hydrolysis has been obtained by the addition of the beta- galactosidase enzyme, and consequently contain high concentration of glucose and galactose. The method has been validated by only one laboratory.


Subsector : C01 Registration Date : 2018-03-09Organization : TSECountry : Turkey


ICS : 67.160.20National Ref :Title : Orange juiceScope : This standard covers orange juice


Page 20



ICS : 67.080.20National Ref :Title : Canned vegetables- GarnitureScope : This standard covers canned vegetables (garniture)



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : PR NF T34-560Title : Paints and varnishes - XXXXXXXXX



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2018-03-15Organization : UNECountry : Spain Latest Date for Comments : 2018-04-24


ICS :National Ref : PNE 84092Title : Cosmetic raw materials. Polyethylenglycol-20 stearateScope : This standard defines the physico-chemical characteristics of polyethylenglycol-20 stearate

for use in cosmetics

Relatedness :National : REV/AMD UNE 84092:1997


Subsector C20: EXPLOSIVES AND FIREWORKS


Page 21


ICS : 71.100.30, 95.020National Ref :Title : Non-technical SurveyScope : This standard establishes principles and provides guidance on the conduct of non-technical

survey and details responsibilities and obligations of the organisations involved.




ICS : 71.100.30, 95.020National Ref :Title : Clearance requirements based on requirements of IMAS 09 10 and IMAS 09 11Scope : This standard defines 'clearance' as part of the land release process and specifies the quality

system (i.e. the organisation, procedures and responsibilities) necessary to determine that land has been cleared by the demining organisation in accordance with its contractual obligations.IMAS 09.11 provides guidance for Battle Area Clearance. IATG 11.30 ASA Explosions – EOD Clearance provides guidance on clearance of the area around an ammunition storage site after an undesired explosion.




ICS : 71.100.30, 95.020National Ref :Title : Information management, including data collection and reporting based on requirements

of IMAS 05.10 and reporting format available in IMSMA.” Scope : This standard establishes general principles and provides guidance for effective information

management in mine action programmes.




ICS : 71.100.30, 95.020National Ref :Title : Mine action - Mine and ERW Risk Education

Page 22

Scope : This IMAS establishes principles and provides guidance for the effective assessment, planning, implementation, management, monitoring and evaluation of MRE. This IMAS updates and replaces all previous IMAS on MRE, specifically 07.11, 07.31, 07.41, 08.50, 12.10, 12.20, and 14.20. This document is intended to serve as a basic framework for MRE globally. Further detail on implementing the IMAS may be found in the guidebooks and modules referred to in the section below on resources (Annex A). This IMAS should be read in conjunction with other IMAS and guides. In particular, attention is drawn to IMAS 01.10, which defines the role of the IMAS, and establishes the guiding principles for their proper use.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 24Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : XP X30-123Title : Guide on energy audits for transport activities



Subsector F20: QUALITY ASSURANCE



ICS :National Ref : PR X 50-144-2Title : Demonstration of resistance to environmental conditions - Design and carrying out of

environmental tests - Part 2: Guidelines for the environmental project tailoring




ICS :National Ref : PR X 50-144-5Title : Demonstration of the resistance to environmental factors - Design and execution of

environmental tests - Part 5: Safety factor




ICS :National Ref : PR X 50-144-1Title : Demonstration of Resistance to Environmental conditions - Design and carrying out of

Environmental Tests - Part 1: Basis of the General Environmental Management Plan

Relatedness :

Page 25

National : New


** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 27Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS : 97.220.99National Ref : DIN 32935Title : Home sports Equipment - Non-stationary tension and pression training equipment -

Safety requirements and test methods



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2018-03-28Organization : UNICountry : Italy


ICS : 71.100.50, 97.140National Ref : UNI1604339Title : Wood finishes - Determination of surface tendency to retain dirtScope : The standard specifies a test method for evaluating the surface tendency to retain dirt. The

method is suitable both to compare different finishing systems, and as a control test to ensure that a certain level of performance is maintained or achieved.

Relatedness :National : REV/AMD UNI 9300:2015


Subsector H26: SEALING MATERIALS

Subsector : H26 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS : 23.060.40National Ref : DIN 30652-1Title : Excess flow valves - Part 1: Excess flow valves for gas installation



Subsector H31: DEDICATED LPG APPLIANCES

Subsector : H31 Registration Date : 2018-03-27Organization : AFNORCountry : France

Page 28


ICS :National Ref : PR NF D35-360/A1Title : LPG fired itinerant professional cooking facilities intended for food applications



Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2018-03-21Organization : ASICountry : Austria


ICS :National Ref : ÖNORM H 2201Title : Services of sanitary, heating, ventilation and cooling technics - Contract to provide

servicesScope : This Austrian Standard specifies methods and contractual provisions for the services of

sanitary, heating, ventilations and cooling technics. It shall be used for works and services inside and outside of building structures from the transfer point of commissioning of the relevant supply or disposal networks.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 30Subsector I09: SMALL TOOLS

Subsector : I09 (Secondary Subsector)




ICS : 17.040.30, 23.040.40National Ref :Title : Workshop gauges and reference gauges for plain parts; tolerances and admissible wearScope : This standard covers tolerances and admissible wear of workshop gauges and reference

gauges for plain parts.

Relatedness :National : NewEuropean : Not Equivalent to DIN 7163:2017


Subsector I20: REFRIGERATION

Subsector : I20 Registration Date : 2018-03-08Organization : NENCountry : Netherlands


ICS : 27.200National Ref : NPR 7600:2018 Concept nlTitle : Application of hydrocarbon as refrigerant in refrigerating systems and heat pumpsScope : NPR 7600 concerns the application of hydrocarbon as refrigerant in refrigerating systems

and heat pumps, including the safety aspects.



Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 04111960Title : Ventilation and air conditioning - Part 4: Ventilation in buildings and rooms of health care

- Supplement 1: Checklist for planning, execution and operation of components



Subsector I36: THERMOPROCESSING TECHNOLOGY

Subsector : I36 (Secondary Registration Date : 2018-03-08

Page 31

Subsector)Organization : NENCountry : Netherlands


ICS : 27.200National Ref : NPR 7600:2018 Concept nlTitle : Application of hydrocarbon as refrigerant in refrigerating systems and heat pumpsScope : NPR 7600 concerns the application of hydrocarbon as refrigerant in refrigerating systems

and heat pumps, including the safety aspects.



** End of Sector **




Sector M : METALLIC MATERIALS


Page 33Subsector M01: STEEL

Subsector : M01 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : PR NF A 35-015Title : Reinforcing steel - Weldable smooth steel - Bars and coils




ICS :National Ref : PR NF A 35-080-1Title : Reinforcing steel - Weldable steel - Part 1: Bars and coils




ICS :National Ref : PR NF A 36-711Title : Non packaging steel - Stainless steel intended for use in contact with foodstuffs, products

and beverages for human and animal consumption


Subsector : M01 Registration Date : 2018-03-09Organization : TSECountry : Turkey


ICS : 17.040.30, 23.040.40National Ref :Title : Workshop gauges and reference gauges for plain parts; tolerances and admissible wearScope : This standard covers tolerances and admissible wear of workshop gauges and reference

gauges for plain parts.

Relatedness :National : NewEuropean : Not Equivalent to DIN 7163:2017

Page 34** End of Subsector **

** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 36Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 06235346Title : Testing of lubricants - Test for fuel diluent in used automotive engine oils - Gas

chromatography method


Subsector : N03 Registration Date : 2018-03-09Organization : NBNCountry : Belgium

Project ID : BE664057/0001 Project Established

ICS : 75.160.20National Ref : prNBN T 52-707:2018Title : Petroleum products - Lamp oil - Specifications

Relatedness :National : REV/AMD NBN T 52-707:2015

Subsector : N03 Registration Date : 2018-03-09Organization : TSECountry : Turkey


ICS : 75.100National Ref :Title : Lubricating oils, industrial oils and related products (Class L) - Group Y: Miscellaneous -

Chain saw oilsScope : This standard specifies requiremenets and test methods for chain saw oils.




ICS : 23.040.01, 75.200National Ref :Title : Determination of remaining strength of partial corroded line pipeScope : This standard is intended solely for the purpose of providing guidance in the evaluation of

metal loss due to corrosion in pressurized steel pipelines and piping systems used for petrol and petroleum produdcts., and natural gas.

Relatedness :

Page 37

National : New


Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2018-03-15Organization : UNECountry : Spain Latest Date for Comments : 2018-04-24


ICS :National Ref : PNE 40608Title : Agrotextiles. Determination of the efficacy against the insects passageScope : This standard establishes a method to evaluate the efficacy of the agrotextiles against the

passage of the different insect species. The efficacy determined in this standard is the percentageofexclusionmeasuredinlaboratoryconditions.This standard is applied to the textiles aimed to the crops protection against insects in the agriculture.




ICS : 97.160National Ref :Title : Textiles - Bedding sets for babiesScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of bedding sets for babies



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : PR NF T54-981Title : Plastics ¿ Plastic dispatching films for the manufacturing of covers intended to be used in

automatic processing in mail network ¿ Specifications for manufacturing and recommendations for use


Page 38** End of Subsector **

** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 40Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS : 17.140.30National Ref : DIN 45689-1Title : Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation

method



Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : S74-303Title : Test procedure for damping perforating and not perforating shocks applied to thorax,

arm, forearm, leg, thigh protective equipment



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : PR XP T90721Title : Water quality




ICS :National Ref : 11904285Title : Drinking water supply from small units and non stationary plants - Part 1: Small units -

Page 41

Guidelines for drinking water, planning, construction, operation and maintenance of plants




ICS :National Ref : 11904286Title : Drinking water supply from small units and non stationary plants - Part 1: Small units -

Guidelines for drinking water, planning, construction, operation and maintenance of plants; Supplement 1: Example for a checklist for the control of water catchment plants




ICS :National Ref : 11904288Title : UV devices for water treatment - Part 3: Reference radiometers for low pressure UV

devices



Subsector S16: AIDS FOR THE DISABLED

Subsector : S16 Registration Date : 2018-03-30Organization : TSECountry : Turkey


ICS : 11.180.01National Ref :Title : Assistive products for blind and vision impaired persons - Product properties for tactile

walking surfacesScope : This standard provides product specifications and certification for polymer tactile walking

surface indicators used to assist in the safe and independent mobility of blind or vision impaired persons.



Page 42Subsector S99: UNDETERMINED



ICS : 11.040.25National Ref : DIN 13097-4Title : Hypodermic needles - Part 4: Point geometry, requirements and testing



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 44Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2018-03-27Organization : AFNORCountry : France


ICS :National Ref : NF L09-751Title : Aerospace series ¿ Designation of standard items ¿ Parts numbers writting




ICS :National Ref : PR NF L09-004Title : Aerospace series ¿ Helicopters components ¿ part numbers




ICS :National Ref : PR NF L09-003Title : Aerospace series ¿ Aircrafts and gliders components ¿ part numbers




ICS :National Ref : PR NF L09-002Title : Aerospace series ¿ Aerospace components part numbers ¿ Major and minor

modifications identification


Subsector : T02 Registration Date : 2018-03-27

Page 45

Organization : AFNORCountry : France


ICS :National Ref : NF L09-001Title : Aerospace series ¿ Identification of Aerospace components ¿ Parts numbers writting



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2018-03-05Organization : UNMZCountry : Czech Republic


ICS :National Ref :Title : Safety rules for lifts - Operation and service of lifts




ICS :National Ref :Title : Safety rules for lifts - Operation and service of lifts




ICS :National Ref :Title : Safety rules for lifts - Testing and inspections of lifts in operation



Subsector T19: ROAD SAFETY

Page 46

Subsector : T19 Registration Date : 2018-03-21Organization : LVS Draft Issue Date : 2018-03-22Country : Latvia Latest Date for Comments : 2018-04-23

Project ID : 00058774/0001 Draft for public enquiry

ICS : 93.080.30National Ref : LVS 85:2016/prLVSTitle : Road markingScope : The standard specifies shape, colour, size, technical requirements and installation rules of

road marking.

Relatedness :National : REV/AMD LVS 85


** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC

March 2018

Issued on : 13 April 2018

Page 1

Information Procedure on Standards

Notifications registered at CCMC during March 2018

Sector U : GENERAL ELECTROTECHNICAL STANDARDS

Register issued on : 13 April 2018

Page 2Subsector U04: ELECTRICAL FLUIDS

Subsector : U04 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 06235347Title : Testing of lubricants - Determination of low boiling components in used engine oils - Gas

chromatography


Subsector : U04 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 06235347Title : Testing of lubricants - Determination of low boiling components in used engine oils - Gas

chromatography



** End of Sector **

Page 3



Sector V : ELECTRONIC ENGINEERING


Page 4Subsector V17: ELECTRONIC MEASURING EQUIPMENT

Subsector : V17 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 02228092Title : Determination of the breath alcohol concentration - Part 4: Requirements for facilities to

test evidential breath analyzers by using calibration gas



Subsector V99: UNDETERMINED

Subsector : V99 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 02228064Title : Road Traffic Signal Systems - Part 300: Technical Requirements for Signal Heads with

LED



** End of Sector **

Page 5



Sector W : ELECTRICAL ENGINEERING


Page 6Subsector W03: ELECTRIC TRACTION EQUIPMENT

Subsector : W03 Registration Date : 2018-03-19Organization : DINCountry : Germany


ICS :National Ref : 02228111Title : State of the railway vehicles - Control and instrumentation technology - Part 207-12:

External visible and audible warning devices for trains



Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS



ICS :National Ref : 02228115Title : Electrical installations of buildings - Part 5-55: Selection and erection of electrical

equipment - Other equipment - Clause 551: Low-voltage generating sets (Amendment 3) (IEC 64/2253/CD:2017)




ICS :National Ref : 02228120Title : Low-voltage electrical installations - Part 7-706: Requirements for special installations or

locations - Conducting locations with restricted movement (IEC 64/2255/CD:2017)



Subsector W31: LIGHTNING PROTECTION

Subsector : W31 Registration Date : 2018-03-09Organization : TSECountry : Turkey


ICS : 91.120.40

Page 7

National Ref :Title : Protectionagainstlightning–Earlystreameremissionlightningprotection

systemsScope : This standard is applicable to early streamer emission lightning protection systems provided

to protect facilities and open areas against direct lightning impact

Relatedness :National : NewEuropean : Modified NF C 17-102:2011


** End of Sector **

List of Subsectors covering work items in CENELEC’s field of activity

(version 2009-05-15)

(Rows or committees shaded in blue indicate changes compared to the last list of subsectors )

U GENERAL ELECTROTECHNICAL STANDARDS

Title IEC TC CLC TC

U01 INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS

IEC TC 3 IEC SC 3C IEC SC 3D

U02 ALUMINIUM CONDUCTORS. IEC TC 7

U03 SYSTEM ASPECTS FOR ELECTRICAL ENERGY SUPPLY IEC TC 8 CLC TC 8X

U04 ELECTRICAL FLUIDS. IEC TC 10 BTTF 116-1

U05 ELECTRICAL INSULATING MATERIALS AND SYSTEMS. IEC TC 15 IEC TC112

U06 MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION MARKINGS.

IEC TC 16

U07 LETTER SYMBOLS FOR ELECTROTECHNOLOGY. IEC TC 25

U08 ELECTRIC WELDING. IEC TC 26 CLC TC 26A CLC TC 26B

U09 INSULATION CO-ORDINATION. IEC TC 28 IEC TC 109

U10 HIGH-VOLTAGE TESTING. IEC TC 42

U11 ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT

IEC TC 89 IEC TC 104

U12 RELIABILITY. IEC TC 56

U15 MAGNETIC ALLOYS. IEC TC 68

U16 PROTECTION BY ENCLOSURES. IEC TC 70

U17 SHORT CIRCUIT CURRENTS. IEC TC 73

U18 ENVIRONMENTAL STANDARDIZATION - GENERAL IEC TC 111 CLC TC 111X

U19 RADIO INTERFERENCE, EMC IEC TC 77 + SCs CISPR + SCs

CLC TC 210

U20 SUPERCONDUCTIVITY IEC TC 90

U21 NANOTECHNOLOGY IEC TC 113

U91 QUALITY ASSURANCE ISO TC 176 BTTF 76-3

U92 ADVANCED CERAMICS IEC TC *

U93 ELECTROMAGNETIC HAZARDS IEC TC 106 CLC TC 106X

U94 PUBLIC PROCUREMENT MATTERS CLC TC 218

U95 ENVIRONMENTAL MATTERS BTWG 132-3

U96 USABILITY & SAFETY OF ELECTRICAL PRODUCTS WITH REFERENCE TO PEOPLE WITH SPECIAL NEEDS

BTWG 101-5

U99 UNDETERMINED. (ex: terminology) IEC TC 1

V ELECTRONIC ENGINEERING

Title IEC TC CLC TC

V01 RADIOCOMMUNICATIONS AND CABLE NETWORKS IEC TC 103 CLC TC 209

V02 ELECTRICAL MEASURING EQUIPMENT. IEC TC 13 CLC TC 13 BTWG 105-2

V03 ELECTROACOUSTICS AND ULTRASONICS. IEC TC 29 IEC TC 87

V04 INSTRUMENT TRANSFORMERS. IEC TC 38 CLC TC 38X

V05 ELECTRONIC TUBES. IEC TC 39

V06 CAPACITORS AND RESISTORS. IEC TC 40 CLC TC 40XA CLC TC 40XB

V07 NUCLEAR INSTRUMENTATION. IEC TC 45 IEC SC 45A IEC SC 45B

CLC TC 45AX CLC TC45B

V08 CABLES AND WIRES FOR TELECOMMUNICATIONS IEC TC 46 + SCs CLC TC 46X + SCs

V09 SEMICONDUCTORS. IEC TC 47 + SCs IEC TC 110

V10 ELECTROMECHANICAL COMPONENTS. IEC TC 48 + SCs IEC TC 91

BTWG 117-1

V11 PIEZOELECTRIC DEVICES. IEC TC 49

V12 MAGNETIC COMPONENTS. IEC TC 51

V13 PRINTED CIRCUITS.

V15 ELECTROMEDICAL EQUIPMENT. IEC TC 62 + SCs CLC TC 62

V16 PROCESS CONTROL. IEC TC 65 + SCs CLC TC 65CX BTWG 109-2

V17 ELECTRONIC MEASURING EQUIPMENT. IEC TC 66 IEC TC 85

BTTF126-1

V18 AUTOMATIC CONTROLS. IEC TC 72 CLC TC 72

V19 SAFETY OF DATA PROCESSING EQUIPMENT. Merged into V24

V20 RADIATION SAFETY AND LASER EQUIPMENT. IEC TC 76 CLC TC 76

V21 ALARM SYSTEMS. IEC TC 79 CLC TC 79

V22 NAVIGATIONAL INSTRUMENTS. IEC TC 80

V23 PHOTOVOLTAIC SYSTEMS. IEC TC 82 CLC TC 82

V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

IEC TC 100 + TAs

IEC TC 108

JTC1/25 & 26

CLC TC 108X CLC TC 205 + SC CLC TC 206 CLC TC 215 CLC/JTC 1

V27 AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

Merged with V24

V28 FIBRE OPTICS. IEC TC 86 + SCs

CLC TC 86A CLC TC 86BXA

V30 DESIGN AUTOMATION IEC TC 93

V31 SURFACE TRANSPORT ELECTROTECHNICAL SYSTEMS

BTTF 69-3

V32 AVIONICS IEC TC 107 CLC TC 107X

W ELECTRICAL ENGINEERING

Title IEC TC CLC TC

W01 ELECTRIC ROTATING MACHINES. IEC TC 2 CLC TC 2

W02 TURBINES: Hydraulic, steam, wind and marine energy IEC TC 4 IEC TC 5 IEC TC 88 IEC TC 114

CLC TC 88

W03 ELECTRIC TRACTION EQUIPMENT. IEC TC 9 CLC TC 9X + SCs

W04 OVERHEAD ELECTRIC LINES. IEC TC 11 CLC TC 11 BTTF 129-1 BTTF 132-1

W05 POWER TRANSFORMERS. IEC TC 14 CLC TC 14

W06 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17A IEC SC 17C

CLC TC 17AC

W07 ELECTRICAL INSTALLATIONS IN SHIPS. IEC TC 18 IEC SC 18A

W08 ELECTRIC CABLES. IEC TC 20 CLC TC 20

W09 SECONDARY BATTERIES. IEC TC 21 IEC SC 21A

CLC TC 21X

W10 POWER ELECTRONICS. IEC TC 22 + SCs CLC TC 22X

W11 ELECTRICAL ACCESSORIES. IEC TC 23 + SCs CLC TC 23BX CLC TC 23E CLC TC 213 BTWG 112-1 BTTF 129-2

W12 ELECTROHEAT. IEC TC 27

W13 EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. IEC TC 31 + SCs

IEC TC 101 CLC TC 31 + SCs

CLC TC 216

W14 FUSES. IEC TC 32 IEC SC 32A

W15 POWER CAPACITORS. IEC TC 33

W16 LAMP AND LUMINAIRES. IEC TC 34 + SCs

CLC TC 34Z

W17 PRIMARY BATTERIES. IEC TC 35

W18 INSULATORS. IEC TC 36 + SCs

CLC TC 36A

W19 SURGE ARRESTERS. IEC TC 37 + SCs

CLC TC 37A

W20 ELECTRICAL RELAYS. IEC TC 94 IEC TC 95

(CLC TC 94)1

W22 ELECTRICAL EQUIPMENT OF MACHINE TOOLS. IEC TC 44 CLC TC 44X

W23 WINDING WIRES. IEC TC 55 CLC TC 55

W24 TELECONTROL SYSTEMS. IEC TC 57

W25 DOMESTIC APPLIANCE PERFORMANCE. IEC TC 59 + SCs CLC TC 59X

W26 DOMESTIC ELECTRICAL APPLIANCES AND MOTOR-OPERATED ELECTRIC TOOLS

IEC TC 61 + SCs

TC 116 CLC TC 61 CLC TC 116 BTTF 128-1

W27 ELECTRICAL INSTALLATIONS IN BUILDINGS. IEC TC 64 CLC TC 64 BTTF 62-3

W28 ELECTRIC VEHICLES. IEC TC 69

W29 ELECTRICAL INSTALLATIONS FOR OUTDOOR SITES

W30 LIVE WORKING. IEC TC 78 CLC TC 78

W31 LIGHTNING PROTECTION. IEC TC 81 CLC TC 81X

W32 LOW-VOLTAGE POWER TRANSFORMERS. IEC TC 96

W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17B IEC SC 17D

CLC TC 17B (CLC TC 17D)

1

W34 LOW-VOLTAGE FUSES. IEC SC 32B IEC SC 32C

W35 SYSTEM ENGINEERING AND ERECTION OF ELECTRICAL POWER INSTALLATIONS

IEC TC 99 CLC TC 99X

W36 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES

IEC TC 97 CLC TC 97

W37 FUEL CELL TECHNOLOGIES IEC TC 105

W38 SAFETY OF ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT

CLC TC 204

W39 HIGH VOLTAGE DIRECT CURRENT (HVDC) TRANSMISSION TECHNOLOGY

IEC TC 115

Z IT MATTERS NOT COVERED BY OTHER SUBSECTORS

Z01 CENELEC/ETSI EMC conducted transmission networks JWG EMC

Z02 WORK IN THE FIELD OF ISO/IEC JTC 1 AND SUB-COMMITTEES JTC 1, except WG 25 & 26

1 Dormant

List of symbols typically used by National Committees for their national standards references

CLC REF

EN 55020:2002 EN 55020:2002/A1:2003 Draft Standards

AT ÖVE/ÖNORM EN 55020+A1+A2 ÖVE/ÖNORM EN 55020+A1+A2 E or ENTWURF

BE NBN EN 55020/1:2003 NBN EN 55020/1:2003 PR NBN

CH SN EN 55020:2002 SN EN 55020:2002/A1:2002

CY CYS EN 55020:2002 CYS EN 55020:2002-iss1

CZ CSN EN 55020 ED. 2 CSN EN 55020 ED. 2/A1

DE DIN EN 55020 (VDE 0872-20) DIN EN 55020 (VDE 0872-20) Reference of the future standard or work item number, ex: 02218905

DK DS/EN 55020:2005 DS/EN 55020/A1:2005 Reference of the future standard

EE EVS-EN 55020:2002 EVS-EN 55020:2003/A1:2003 Reference of the future standard

ES UNE-EN 55020:2004 UNE-EN 55020-A1:2004 PNE

FI SFS-EN 55020:2002 SFS-EN 55020:2000/A1:2003 Reference of the future standard

FR NF EN 55020 NF EN 55020/A1 PR NF

GB BS EN 55020:2002 BS EN 55020:2002+A1:2003 Reference of the future standard

GR ELOT EN 55020:2002 ELOT EN 55020/A1:2003 Reference of the future standard

HU MSZ EN 55020:2004 MSZ EN 55020:2004 PR I.S. or Reference of the future standard

IE I.S. EN 55020:2005 I.S. EN 55020/A1:2005

IS IST EN 55020:2002 IST EN 55020:2002/A1:2003

IT CEI EN 55020:2003 CEI EN 55020/A1:2003 Reference of the future standard

LT LST EN 55020+A1:2003 LST EN 55020+A1:2003

LU** EN 55020:2002 EN 55020:2002/A1:2003

LV LVS EN 55020:2002 LVS EN 55020:2002 /A1:2003

MT MSA EN 55020:2002 MSA EN 55020:2002/A1:2003

NL NEN-EN 55020:2002/C12:2005 NEN-EN 55020:2002/A1:2003/C11:2005 ONTWERP NEN

NO NEK EN 55020:2002 NEK EN 55020:2002/A1:2003

PL PN-EN 55020:2003 PN-EN 55020:2003/A1:2003

PT NP EN 55020:2002 NP EN 55020:2002/A1:2003 PR NP

RO SR EN 55020:2003 SR EN 55020:2003/A1:2004

SE SS-EN 55020 SS-EN 55020/A1:2003 Reference of the future standard

SI SIST EN 55020:2003 SIST EN 55020:2003/A1:2003

SK STN EN 55020:2002 STN EN 55020/A1:2003

** Luxembourg applies the CENELEC reference number without a national prefix

Documents

ΠΡΟΣ: Όλα τα Μέλη · Title : Technical Surveyor's report on dwellings in preparation for sales Scope : This standard specifies minimum requirements for what a technical