Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
Let’s makeimplant works
IMPLANTS & PROSTHETICS CATALOGUE
2017 - 2018
design
production
osseointegration
precision
Novamind is a manufacturer of implant prosthetic
components for almost a decade. The company was
founded by dental professionals with experience in
implantology. This fact guaranties the correct design
and compatibility of Novamind implant systems. No-
vamind has been using the state of the art technol-
ogy in the production of the prosthetic components.
The high quality of the Novamind products has made
them a market leader in implant prosthetics in sev-
eral countries.
So due to the unanimous demand of the Novamind
prosthetic parts users, we decided to proceed to the
development of implant systems. We offer to the us-
ers a wide range of solutions and ideas that make
implantology a profitable field easy to approach.
We followed for the implants the same guidelines, such us:
Excellent raw material (titanium grade 4) provid-ed exclusively from German company Zapp.
The highest precision ensured by the state of the art CNC machinery.
Evidence based products: the implant systems and prosthetics are subject to strong in vitro as well in vivo tests prior to go to market.
Let’s make implant works
SYMMETRON
IMPLANT SYSTEMS
PROTON
KRATEON ANTIROPON
ARTION
The
cont
ents
of t
his
cata
logu
e ar
e su
bjec
t to
impr
ovem
ents
or
chan
ges
wit
hout
any
pri
or n
otic
e.
Titanium abutments
Custom made titanium abutments
Co-Cr direct to implant i-bridges
Implant burs
Multi unit abutments
We offer the entire spectrum of possibilities in implant dentistry, fulfilling every demand for implant treatments.
Let’s make implant works
Tailor made implant restorations with high end CNC machines. The latest technology software and milling systems tranform the given STL files into a perfect reality under two microns precision.
Let’s make implant works
The results highlight the high quality of the implant surface topography and chemistry that allowed adhesion, development and optimal growth of the cells tested within 24 hours after plating. With regard to these tests, we may conclude that the analyzed implant is adequate to allow a good osseointegration.
The diagram below indicates that the topography of the implant surface present adequate roughnes that leads to a reliable retention to the bone.
CELLS ADHESION TEST
IMPLANT rOugHNESS
Let’s make implant works
Milling center NOvAMIND
NOvAMIND MILLINg CENTEr
We manufacture all types of restorations: STL files are transformed into perfect den-tal prosthetic restorations. All softwares compatible
Additive manufacturing laser sintering crowns and bridges made of Bio certified Co-Cr
Custom titanium abutments, high aesthetic and precision. Up to 45 degrees angula-tion, perfect customized emergence profile
Direct to implant, screw retained crowns and bridges. adjusted screw channel, per-fect fit. Bio certified Co-Cr
Zirconium custom abutments and implant superstructures. Aesthetic and biocom-patibility, soft tissue friendly material. 900 Mpa strength. We manufacture either substructures for ceramic material, or full contour multi layered restorations made by Zirconium.
PMMA for long term provisional crowns and bridges
PEEK aesthetic restorations
Implant system compatible to XIVE FRIALIT DENTSPLY Implants*
Surface treatment SLa tYPe
*the brand-name is a registered trademark of the respective company
PROTON
TITANIuM gRAdE
4
Code Number
diameter/leNgth(mm)
ImP.01.340.09 3,4 - 9,5
ImP.01.340.11 3,4 - 11
ImP.01.340.13 3,4 - 13
ImP.01.380.08 3,8 - 8,0
ImP.01.380.09 3,8 - 9,5
ImP.01.380.11 3,8 - 11
ImP.01.380.13 3,8 - 13
ImP.01.450.08 4,5 - 8,0
ImP.01.450.09 4,5 - 9,5
ImP.01.450.11 4,5 - 11
ImP.01.450.13 4,5 - 13
ImP.01.450.15 4,5 - 15
ImP.01.550.08 5,5 - 8,0
ImP.01.550.09 5,5 - 9,5
ImP.01.550.11 5,5 - 11
ImP.01.550.13 5,5 - 13
ImPLant DrILL DrILL DrILL DrILL DrILL DrILL
ø 3,4ø 2,0 mm ø 2,5 mm ø 3,0 mm
(fInaL DrILL)
ø 3,8ø 2,0 mm ø 2,5 mm ø 3,0 mm ø 3,4 mm
(fInaL DrILL)
ø 4,5ø 2,0 mm ø 2,5 mm ø 3,0 mm ø 3,4 mm ø 4,2 mm
(fInaL DrILL)
ø 5,5ø 2,0 mm ø 2,5 mm ø 3,0 mm ø 3,4 mm ø 4,2 mm ø 4,8 mm
(fInaL DrILL)
drilling sequence
surgical kit
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants* Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
01.340.00.120 01.340.00.270 01.340.00.370 01.100
Straight abutment with fixation screw. 3,4 mm
GH 1,7 mm
GH 2,7 mm
GH 3,7 mm
01.340.17.120 01.340.17.270 01.340.17.370 01.100
angled abutment 170 with fixation screw.
GH 1,7 mm
GH 2,7 mm
GH 3,7 mm
3,4 mm
01.340.300 01.340.301 01.100PL
3,4 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained restoration and screw.
01.340.403 01.340.405
3,4 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
01.340.200 01.340.500 Implant analog. Impression post for
open and closed tray technique.
3,4 mm
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
01.340.600 01.340.601 01.100
3,4 mm
titanium base for zirconium abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
01.340.900 01.100
titanium temporary abutment for provisional restorations and screw.3,4 mm
01.340.710 01.340.711 01.100
3,4 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation,
01.340.700 01.340.701 01.100P
3,4 mm
titanium base with anti-rotation, castable sleeve for screw-re-tained restorations and two screws.
titanium base without anti-rotation, castable sleeve for screw-re-tained restorations and two screws.
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants* Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
01.380.300 01.380.301 01.100PL
3,8 mm
Plastic castable abutment with an-ti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained restoration and screw.
angled abutment 170 with fixation screw.
01.380.17.120 01.380.17.270 01.380.17.370 01.100
3,8 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
01.380.200
01.380.500 Implant analog.
3,8 mm
Impression post for open and closed tray technique.
Straight abutment with fixation screw.
01.380.00.120 01.380.00.270 01.380.00.370 01.100
3,8 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
01.380.403 01.380.405
3,8 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
01.380.600 01.380.601 01.100
3,8 mm
titanium base for zirconium abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
01.380.700 01.380.701 01.100P
3,8 mm
titanium base with anti-rotation, castable sleeve for screw-re-tained restorations and two screws.
titanium base without anti-rotation, castable sleeve for screw-re-tained restorations and two screws.
01.380.900 01.100
titanium temporary abutment for provisional restorations and screw.3,8 mm
01.380.710 01.380.711 01.100
3,8 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation,
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants* Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Impression post for open and closed tray technique.
Implant analog.
01.450.200 01.450.500
4,5 mm
01.450.403 01.450.405
4,5 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
01.450.300 01.450.301 01.100PL
4,5 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained restoration and screw.
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
01.450.00.120 01.450.00.270 01.450.00.370 01.100
Straight abutment with fixation screw. 4,5 mm
angled abutment 170 with fixation screw.
01.450.17.120 01.450.17.270 01.450.17.370 01.100
4,5 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
titanium base with anti-rotation, castable sleeve for screw-retained restorations and two screws.
01.450.700 01.450.701 01.100P
4,5 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained restoration and screw.
01.450.600 01.450.601 01.100
4,5 mm
titanium base for zirconium abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
titanium temporary abutment for provisional restorations and screw.
01.450.900 01.100
4,5 mm
01.450.710 01.450.711 01.100
4,5 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants* Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Mu.01.340.00.100 Mu.01.340.00.200 Mu.01.340.00.300 Mu.01.340.00.400
multi unit abutment straight3,4 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
multi unit abutment straight
Mu.01.380.00.100 Mu.01.380.00.200 Mu.01.380.00.300 Mu.01.380.00.400
3,8 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
multi unit abutment straight
Mu.01.450.00.100 Mu.01.450.00.200 Mu.01.450.00.300 Mu.01.450.00.400
4,5 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
MuLTI uNIT ABuTMENTS SYSTEM
Mu.301 Mu.601 Mu.901 Mu.100
Plastic castable abutment
titanium base
temporary cylinder
Srew for mu.301, 601, 901
Mu.200 Mu.500 mu analog mu impression
post
Mu.403 Healing screw with a height of 3 mm
Prosthetics components compatible to XIVE FRIALIT DENTSPLY implants*
PROTON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
NOVALOC OVERdENTuRE ABuTMENTS
novaloc overdenture abutment3,4 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
GH 5 mm
01.340.801 01.340.802 01.340.803 01.340.804 01.340.805
novaloc overdenture abutment3,8 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
GH 5 mm
01.380.801 01.380.802 01.380.803 01.380.804 01.380.805
novaloc overdenture abutment4,5 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
GH 5 mm
01.450.801 01.450.802 01.450.803 01.450.804 01.450.805
novaloc retention plastic kit
800 PL
Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM Implants*
Surface treatment SLa tYPe
TITANIuM gRAdE
4
*the brand-name is a registered trademark of the respective company
SYMMETRON
Code Number
diameter/leNgth(mm)
ImP.02.330.08 3,3 - 8,0
ImP.02.330.10 3,3 - 10
ImP.02.330.12 3,3 - 12
ImP.02.410.08 4,1 - 8,0
ImP.02.410.10 4,1 - 10
ImP.02.410.12 4,1 - 12
ImP.02.480.08 4,8 - 8,0
ImP.02.480.10 4,8 - 10
ImP.02.480.12 4,8 - 12
ImPLant DrILL DrILL DrILL DrILL
ø 3,3ø 2,0 mm
ø 2,8 mm
(fInaL DrILL)
ø 4,1ø 2,0 mm ø 2,8 mm
ø 3,5 mm
(fInaL DrILL)
ø 4,8ø 2,0 mm ø 2,8 mm ø 3,5 mm
ø 4,3 mm
(fInaL DrILL)
surgical kit
drilling sequence
Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM implants* Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM implants*
SYMMETRON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
* choice of positioning
angled abutment 170 with fixation screw. angled abutment 230 with fixation screw.
02.480.17A* 02.480.17B* 02.480.23A* 02.480.23B* 02.100
4,8 mm
02.480.300 02.480.301 02.100PL
4,8 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained resto-ration and screw.
02.480.403 02.480.405
4,8 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
02.480.600 02.480.601 02.100IN
4,8 mm
titanium base for zirconium abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
02.480.200 02.480.500
4,8 mm
Implant analog. Impression post for open and closed tray technique.
Straight abutment with fixation screw.
02.480.00 02.100
4,8 mm
Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM implants*
SYMMETRON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
02.480.700 02.480.701 02.100P
4,8 mm
titanium base with anti-rotation, castable sleeve for screw-retained restorations and two screws.
titanium base without anti-rotation, castable sleeve for screw-retained restorations and two screws.
02.480.710 02.480.711 02.100
4,8 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation
Mu.02.480.300 Mu.02.480.301 Mu.02.480.601 Mu.02.480.100
Plastic castable abutment with anti-rotation
Plastic castable abutment without anti-rotation
titanium base
Srew for mu.02.480.300 mu.02.480.301
Synocta type abutment for screw retained restorations.
Mu.02.480.00
4,8 mm
MuLTI uNIT ABuTMENTS SYSTEM
titanium temporary abutment for provisional restorations and screw.
02.480.900 02.100
4,8 mm
Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM implants* Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM implants*
SYMMETRON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
novaloc overdenture abutment4,8 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
GH 5 mm
02.480.801 02.480.802 02.480.803 02.480.804 02.480.805
novaloc retention plastic kit
800 PL
NOVALOC OVERdENTuRE ABuTMENTS
Implant system compatible to STRAUMAN SOFT TISSUE LEVEL RN SYSTEM implants*
Let’s make implant works
Implant system compatible to NOBEL REPLACE SELECT Implants*
Surface treatment tI-unIte tYPe
TITANIuM gRAdE
4
*the brand-name is a registered trademark of the respective company
KRATEON
Code Number
diameter/leNgth(mm)
ImP04.350.08 3,5 - 8,0
ImP04.350.10 3,5 - 10
ImP04.350.11 3,5 - 11,5
ImP04.350.13 3,5 - 13
ImP04.430.08 4,3 - 8,0
ImP04.430.10 4,3 - 10
ImP04.430.11 4,3 - 11,5
ImP04.430.13 4,3 - 13
ImP04.500.08 5,0 - 8,0
ImP04.500.10 5,0 - 10
ImP04.500.11 5,0 - 11,5
ImP04.500.13 5,0 - 13
ImPLant DrILL DrILL DrILL DrILL DrILL
ø 3,5 ø 2,0 mm ø 2,5 mm ø 3,5 mm(fInaL DrILL)
ø 4,3 ø 2,0 mm ø 2,5 mm ø 3,5 mm ø 4,3 mm(fInaL DrILL)
ø 5,0 ø 2,0 mm ø 2,5 mm ø 3,5 mm ø 4,3 mm ø 5,0 mm(fInaL DrILL)
surgical kit
drilling sequence
Implant system compatible to NOBEL REPLACE SELECT implants* Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Straight abutment with fixation screw.
04.350.00.120 04.350.00.270 04.350.00.370 04.350.100
3,5 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
angled abutment 170 with fixation screw.
04.350.17.120 04.350.17.270 04.350.17.370 04.350.100
3,5 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
04.350.200 04.350.500
3,5 mm
Implant analog. Impression post for open and closed tray technique.
04.350.300 04.350.301 04.350.100
3,5 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained resto-ration and screw.
04.350.403 04.350.405
3,5 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
04.350.600 04.350.601 04.350.100
3,5 mm
titanium base for zirconi-um abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconi-um abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
titanium temporary abutment for provisional restorations and screw.
04.350.900 04.350.100
3,5 mm
04.350.700 04.350.701 04.350.100P
3,5 mm
titanium base with anti-rotation, castable sleeve for screw-retained restorations and two screws.
titanium base without anti-rotation, castable sleeve for screw-retained restorations and two screws.
04.350.710 04.350.711 04.350.100
3,5 mm
cast on co-cr base ucLa abutment with anti-ro-tation
cast on co-cr base ucLa abutment without anti-rotation
04.430.403 04.430.405
4,3 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
04.430.200 04.430.500
4,3 mm
Implant analog. Impression post for open and closed tray technique.
Implant system compatible to NOBEL REPLACE SELECT implants* Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
04.430.600 04.430.601 04.430/500.100
4,3 mm
titanium base for zirconium abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
04.430.700 04.430.701 04.430/500.100P
4,3 mm
titanium base with anti-rotation, castable sleeve for screw-retained restorations and two screws.
titanium base without anti-rotation, castable sleeve for screw-retained restorations and two screws.
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
angled abutment 170 with fixation screw.
04.430.17.120 04.430.17.270 04.430.17.370 04.430/500.100
4,3 mm
04.430.300 04.430.301 04.430/500.100
4,3 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained resto-ration and screw.
Straight abutment with fixation screw.
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
04.430.00.120 04.430.00.270 04.430.00.370 04.430/500.100
4,3 mm
Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Straight abutment with fixation screw.
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
04.500.00.120 04.500.00.270 04.500.00.370 04.430/500.100
5,0 mm
04.500.200 04.500.500
5,0 mm
Implant analog. Impression post for open and closed tray technique.
04.500.403 04.500.405
5,0 mm
Healing screw with a height of 3 mm.
Healing screw with a height of 5 mm
04.430.710 04.430.711 04.430/500.100
4,3 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation
titanium temporary abutment for provisional restorations and screw.
04.430.900 04.430/500.100
4,3 mm
Implant system compatible to NOBEL REPLACE SELECT implants* Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
04.500.700 04.500.701 04.430/500.100P
5,0 mm
titanium base with anti-rotation, castable sleeve for screw-retained restorations and two crews.
titanium base without anti-rotation, castable sleeve for screw-retained restorations and two screws.
04.500.710 04.500.711 04.430/500.100
5,0 mm
cast on co-cr base ucLa abutment with anti-ro-tation
cast on co-cr base ucLa abutment without anti-rotation
titanium temporary abutment for provisional restorations and screw.
04.500.900 04.430/500.100
5,0 mm
04.500.300 04.500.301 04.430/500.100
5,0 mm
Plastic castable abutment with anti-rotation for single crowns and screw.
Plastic castable abutment without anti-rotation for screw retained restoration and screw.
04.500.600 04.500.601 04.430/500.100
5,0 mm
titanium base for zirconium abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
angled abutment 170 with fixation screw.
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
04.500.17.120 04.500.17.270 04.500.17.370 04.430/500.100
5,0 mm
Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
multi unit abutment straight4,3 mm
Mu.04.430.00.100 Mu.04.430.00.200 Mu.04.430.00.300 Mu.04.430.00.400
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
multi unit abutment straight5,0 mm
Mu.04.500.00.100 Mu.04.500.00.200 Mu.04.500.00.300 Mu.04.500.00.400
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
multi unit abutment straight3,5 mm
Mu.04.350.00.100 Mu.04.350.00.200 Mu.04.350.00.300 Mu.04.350.00.400
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
angled abutment 170 with fixation screw. 3,5 mm
Mu.04.350.17.250 Mu.04.350.17.350
GH 2,5 mm
GH 3,5 mm
angled abutment 300 with fixation screw. 3,5 mm
Mu.04.350.30.300 Mu.04.350.30.400
GH 3 mm
GH 4 mm
MuLTI uNIT ABuTMENTS SYSTEM
Implant system compatible to NOBEL REPLACE SELECT implants* Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Mu.301 Mu.601 Mu.901 Mu.100
Plastic castable abutment
titanium base
temporary cylinder
Srew for mu.301, 601, 901
Mu.403 Mu.200 Mu.500
mu analog mu impression post
Healing screw with a height of 3 mm
angled abutment 300 with fixation screw. 5 mm
Mu.04.500.17.250 Mu.04.500.17.350
GH 2,5 mm
GH 3,5 mm
angled abutment 170 with fixation screw. 4,3 mm
Mu.04.430.17.250 Mu.04.430.17.350
GH 2,5 mm
GH 3,5 mm
angled abutment 170 with fixation screw. 4,3 mm
Mu.04.430.30.300 Mu.04.430.30.400
GH 3 mm
GH 4 mm
angled abutment 170 with fixation screw. 5 mm
Mu.04.500.30.300 Mu.04.500.30.400
GH 3 mm
GH 4 mm
Implant system compatible to NOBEL REPLACE SELECT implants*
KRATEON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
NOVALOC OVERdENTuRE ABuTMENTS
novaloc overdenture abutment3,5 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
04.350.801 04.350.802 04.350.803 04.350.804
novaloc overdenture abutment4,3 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
04.430.801 04.430.802 04.430.803 04.430.804
novaloc overdenture abutment5,0 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
04.500.801 04.500.802 04.500.803 04.500.804
novaloc retention plastic kit
800 PL
Ιmplant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP Implants*
Surface treatment SLa tYPeTITANIuM gRAdE
4
*the brand-name is a registered trademark of the respective company
ARTION
Code Number
diameter/leNgth(mm)
ImP.06.350.08 3,5 - 8,0
ImP.06.350.10 3,5 - 10
ImP.06.350.11 3,5 - 11,5
ImP.06.350.13 3,5 - 13
ImP.06.350.15 3,5 - 15
ImP.06.400.08 4,0 - 8,0
ImP.06.400.10 4,0 - 10
ImP.06.400.11 4,0 - 11,5
ImP.06.400.13 4,0 - 13
ImP.06.400.15 4,0 - 15
ImP.06.450.06 4,5 - 6,0
ImP.06.450.08 4,5 - 8,0
ImP.06.450.10 4,5 - 10
ImP.06.450.11 4,5 - 11,5
ImP.06.450.13 4,5 - 13
ImP.06.450.15 4,5 - 15
ImP.06.500.06 5,0 - 6,0
ImP.06.500.08 5,0 - 8,0
ImP.06.500.10 5,0 - 10
ImP.06.500.11 5,0 - 11,5
ImP.06.500.13 5,0 - 13
ImP.06.500.15 5,0 - 6,0
ImP.06.600.08 6,0 - 8,0
ImP.06.600.10 6,0 - 10
SOFT BONE
HARd BONE
ImPLant DrILL DrILL DrILL DrILL DrILL
ø 3,5ø 2,0 mm ø 2,5 mm ø 2,8 mm
(fInaL DrILL)
ø 4,0ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 4,5ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 5,0ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm ø 3,65 mm
(fInaL DrILL)
ImPLant DrILL DrILL DrILL DrILL DrILL DrILL
ø 3,5ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 4,0ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm ø 3,65 mm
(fInaL DrILL)
ø 4,5ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 3,65 mm
(fInaL DrILL)
ø 5,0ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm ø 3,65 mm ø 4,3 mm
(fInaL DrILL)
surgical kit
drilling sequence
Implant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP implants* Implant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP implants*
ARTION
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
Straight abutment with fixation screw.
06.375.00.120 06.375.00.270 06.375.00.370 06.100
3,5 - 4 - 4,5 - 5 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
angled abutment 170 with fixation screw.
06.375.17.120 06.375.17.270 06.375.17.370 06.100
3,5 - 4 - 4,5 - 5 mm
GH 1,2 mm
GH 2,7 mm
GH 3,7 mm
angled abutment 230 with fixation screw.
06.375.23.120 06.375.23.270 06.375.23.370 06.100
3,5 - 4 - 4,5 - 5 mm
06.375.200 06.375.500
3,5 - 4 - 4,5 - 5 mm
Implant analog. Impression post for open and closed tray technique.
06.375.403 06.375.405
3,5 - 4 - 4,5 - 5 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
Implant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP implants*
ARTION
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
titanium temporary abutment for provisional restorations and screw.
06.375.900 06.100
3,5 - 4 - 4,5 - 5 mm
06.375.600 06.375.601 06.100
3,5 - 4 - 4,5 - 5 mm
titanium base for zirconi-um abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconi-um abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
06.375.700 06.375.701 06.100P
3,5 - 4 - 4,5 - 5 mm
titanium base with anti-rotation, castable sleeve for screw-retained restorations and two screws.
titanium base without anti-rotation, castable sleeve for screw-retained restorations and two screws.
06.375.300 06.375.301 06.100
3,5 - 4 - 4,5 - 5 mm
Plastic castable abutment with anti-rotation for sin-gle crowns and screw.
Plastic castable abutment without anti-rotation for screw retained resto-ration and screw.
06.375.710 06.375.711 06.100
3,5 - 4 - 4,5 - 5 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation
Implant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP implants* Implant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP implants*
ARTION
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Mu.403 Mu.200 Mu.500
mu analog mu impression post
Healing screw with a height of 3 mm
Mu.301 Mu.601 Mu.901 Mu.100
Plastic castable abutment
titanium base
temporary cylinder
Srew for mu.301, 601, 901
Mu.06.375.100 Mu.06.375.200 Mu.06.375.300 Mu.06.375.400
multi unit abutment straight3,75 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
MuLTI uNIT ABuTMENTS SYSTEM
angled abutment 170 with fixation screw. 3,75 mm
Mu.06.375.17.250 Mu.06.375.17.350
GH 2,5 mm
GH 3,5 mm
angled abutment 300 with fixation screw. 3,75 mm
Mu.06.375.30.300 Mu.06.375.30.400
GH 3 mm
GH 4 mm
Implant system compatible to MIS, ZIMMER, BIO HORIZON, PALTOP implants*
ARTION
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
novaloc overdenture abutment3,75 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
GH 5 mm
06.375.801 06.375.802 06.375.803 06.375.804 06.375.805
novaloc retention plastic kit
800 PL
NOVALOC OVERdENTuRE ABuTMENTS
Implant system compatible to NOBEL ACTIVE Implants*
Surface treatment SLa tYPe
*the brand-name is a registered trademark of the respective company
ANTIROPON
Code Number
diameter/leNgth(mm)
ImP.08.350.10 3,5 - 10
ImP.08.350.11 3,5 - 11,5
ImP.08.350.13 3,5 - 13
ImP.08.430.10 4,3 - 10
ImP.08.430.11 4,3 - 11,5
ImP.08.430.13 4,3 - 13
ImP.08.500.08 5,0 - 8,0
ImP.08.500.10 5,0 - 10
ImP.08.500.11 5,0 - 11,5
ImP.08.500.13 5,0 - 13
TITANIuM gRAdE
4
SOFT BONE
HARd BONE
ImPLant DrILL DrILL DrILL DrILL DrILL
ø 3,5ø 2,0 mm ø 2,5 mm ø 2,8 mm
(fInaL DrILL)
ø 4,3ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 5,0ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm ø 3,65 mm
(fInaL DrILL)
ImPLant DrILL DrILL DrILL DrILL DrILL DrILL
ø 3,5ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 4,3ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm
(fInaL DrILL)
ø 3,65 mm
(fInaL DrILL)
ø 5,0ø 2,0 mm ø 2,5 mm ø 2,8 mm ø 3,2 mm ø 3,65 mm ø 4,3 mm
(fInaL DrILL)
drilling sequence
surgical kit
Implant system compatible to NOBEL ACTIVE implants*Implant system compatible to NOBEL ACTIVE implants*
ANTIROPON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
08.350.403 08.350.405
3,5 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
08.350.200 08.350.500
3,5 mm
Implant analog. Impression post for open and closed tray technique.
08.350.710 08.350.711 08.350.100
3,5 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation
GH 1,5 mm
GH 3 mm
Straight abutment with fixation screw.
08.350.00.150
08.350.00.300 08.350.100
3,5 mm
GH 1,5 mm
GH 3 mm
angled abutment 170 with fixation screw.
08.350.17.150
08.350.17.300 08.350.100
3,5 mm
08.350.600 08.350.601 08.350.100
3,5 mm
titanium base for zirconi-um abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconi-um abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
Implant system compatible to NOBEL ACTIVE implants*
ANTIROPON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
08.430.403 08.430.405
4,3 - 5,0 mm
Healing screw with a height of 3 mm
Healing screw with a height of 5 mm
08.430.200 08.430.500
4,3 - 5,0 mm
Implant analog. Impression post for open and closed tray technique.
GH 1,2 mm
GH 2,7 mm
Straight abutment with fixation screw.
08.430.00.120
08.430.00.270 08.430.100
4,3 - 5,0 mm
GH 1,2 mm
GH 2,7 mm
angled abutment 170 with fixation screw.
08.430.17.120
08.430.17.270 08.430.100
4,3 - 5,0 mm
08.430.600 08.430.601 08.430.100
4,3 - 5,0 mm
titanium base for zirconi-um abutment (cad-cam) with anti-rotation, plastic sleeve and screw.
titanium base for zirconi-um abutment (cad-cam) without anti-rotation, plastic sleeve and screw.
titanium temporary abutment for provisional restorations and screw.
08.350.900 08.100
3,5 mm
Implant system compatible to NOBEL ACTIVE implants*Implant system compatible to NOBEL ACTIVE implants*
ANTIROPON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Mu.08.350.100 Mu.08.350.200 Mu.08.350.300 Mu.08.350.400
multi unit abutment straight3,75 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
angled abutment 300 with fixation screw. 3,5 mm
Mu.08.350.30.300 Mu.08.350.30.300
GH 3 mm
GH 4 mm
angled abutment 170 with fixation screw. 3,5 mm
Mu.08.350.17.250 Mu.08.350.17.350
GH 2,5 mm
GH 3,5 mm
MuLTI uNIT ABuTMENTS SYSTEM
08.430.710 08.430.711 08.430.100
4,3 - 5,0 mm
cast on co-cr base ucLa abutment with anti-rotation
cast on co-cr base ucLa abutment without anti-rotation
titanium temporary abutment for provisional restorations and screw.
08.430.900 08.100
4,3 - 5,0 mm
Implant system compatible to NOBEL ACTIVE implants*
ANTIROPON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
Mu.403 Mu.200 Mu.500
mu analog mu impression post
Healing screw with a height of 3 mm
Mu.301 Mu.601 Mu.901 Mu.100
Plastic castable abutment
titanium base
temporary cylinder
Srew for mu.301, 601, 901
multi unit abutment straight4,3 - 5,0 mm
Mu.08.430.100 Mu.08.430.200 Mu.08.430.300 Mu.08.430.400
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
angled abutment 300 with fixation screw. 4,3 - 5,0 mm
Mu.08.430.30.300 Mu.08.430.30.400
GH 3 mm
GH 4 mm
angled abutment 170 with fixation screw. 4,3 - 5,0 mm
Mu.08.430.17.250 Mu.08.430.17.350
GH 2,5 mm
GH 3,5 mm
Implant system compatible to NOBEL ACTIVE implants*Implant system compatible to NOBEL ACTIVE implants*
ANTIROPON
*the brand-name is a registered trademark of the respective company
TITANIuM gRAdE
5
conc
ave
form
of t
he tr
ansg
ingi
val p
arts
novaloc overdenture abutment3,5 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
08.350.801 08.350.802 08.350.803 08.350.804
novaloc overdenture abutment4,3-5,0 mm
GH 1 mm
GH 2 mm
GH 3 mm
GH 4 mm
08.430-500.801 08.430-500.802 08.430-500.803 08.430-500.804
novaloc retention plastic kit
800 PL
NOVALOC OVERdENTuRE ABuTMENTS
Implant system compatible to NOBEL ACTIVE implants*Let’s make implant works
Let’s make implant works
Let’s make implant works
The
cont
ents
of t
his
cata
logu
e ar
e su
bjec
t to
impr
ovem
ents
or
chan
ges
wit
hout
any
pri
or n
otic
e.
Let’s make implant works
design
production
osseointegration
precision
this catalogue is designed by GmG Group of companies ([email protected]). athens, Greece 2017
Novamind P.C.
4, Apostolou Pavlou - Acharnes 136 72 - Athens - Greece - tel. +30 210 [email protected] - www.novamind.gr