�

�

� �

�

�

� �

����������� ������ ���������������������������������

���� �������������� ���!������������������������� �����

LiTE

Zenith LiTE 3D AOI with RevolutionaryNew 3D Measurement

The Zenith LiTE 3D AOI system provides full 3D inspection of components,patterns, holes and even foreign material on assembled PCBs with true 3D measurement. Koh Young Technology offers accurate and fast 3D inspection overcoming the shortcomings and vulnerabilities of conventional 2D AOI.

Using 3D measurement values to program and to set inspection conditions, Zenith LiTE 3D AOI system provides users with intuitive and user friendly software. Results can be reviewed together with Koh Young’s 3D SPI inspection results, to enable easier verification and analysis of defects.

Flags and Quantifies All DefectsMissing, Offset, Rotation, Polarity, Upside Down, OCV, Solder Fillet, Billboarding, Lifted Lead, Lifted Body, Tombstone, Bridging and more.

Lifted Body

LED Component Defect

No Solder

Judging Solder Fillet DefectsUsing 3D Height and Volume Measurement Values

Using patented 4-way projection technology and multi-frequency height measurement, Zenith LiTE provides a wide range of measurement while maintaining the high resolution.

Lifted Body(Body Coplanarity)

Solder Joint Defects

Lifted Lead(Lead Coplanarity)

Judge Defect by Measured Component Height Profile

Full 3D Inspection of Solder Joint

Judge Defect by Measured Lead Shape Profile

Measured lead height valueexceeds tolerance

Dynamic PCB Environment

Flexible PCB

Slope

Height Difference

Local Board Warp/ Rotation/ Shrinkage/ Expansion

The Perfect Warp Compensation SolutionPCB warp becomes more pronounced during the reflow process in the applications using FPCB or building large boards, due to the high temperature required for reflow process. Zenith LiTE compensates serious FPCB warp in real time while not sacrificing inspection speed and without false calls. Koh Young’s KSMART Warp offers a simple and easy solution by teaching bare board prior to inspection to recognize pattern information without PCB CAD data.

����������� ���

�����������������Y����������� ���

Inspects Connector on FPCBwith Serious Warp

������������

Fast and Easy Programming Using 3D Measurement ValuesKoh Young’s innovative programming tool offers the new concept of easy programming by using 3D measurement value. Koh Young’s own 3D Component Library, threshold values and inspection results are all based on true measurement values. Users can eliminate lengthy fine tuning process, and programming is much easier for all user levels.

Intuitive and Accurate Defect Judgement

After Warp Compensation

������������ �����

www.kohyoung.com

�

© Koh Young Technology Inc. 2012-2014

0.32sec/FOV, 50cm2/sec, 7.7in2/sec 0.30sec/FOV, 30cm2/sec, 4.6in2/sec

20μm�

4MPix High Speed Camera

RGB LED Dome Illumination

40x40mm (1.57x1.57inch)

(Basic) PCB Gerber, Placement file, Mounter job file, Mentor Neutral, FabMaster, FabMaster Pin CAD file, Zuken

(Optional) ODB++, Allegro, GenCAD

Windows 7 Ultimate 64 bit

50mm (1.96inch)

200-240VAC, 50/60Hz Single Phase, 5kgf/cm2

Above specifications are subject to change without notice

14&15th Floor, Halla Sigma Valley Bldg, 53 Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea (153-706)Tel. +82-2-6343-6000 / Fax. +82-2-6343-6001 / E-mail. info@kohyoung.com

SpecificationsRequirements Solutions

3D Shadow Free Moiré Technology & 4 Way Projection

Multi Frequency Moiré Technology

Pad Referencing + Multi Frequency Moiré Technology

True 3D Measurement

Full 3D Inspection of All Components

Wide Measurement Range + Accuracy

Real Time PCB Warp Compensation

Dark Component & White Body Component Location

Legending and Specular Regions on PCB

Lifted Lead Measurement

Shallow Polarity Dimple Measurement

Inspection Items

Inspection Task Missing, Offset, Rotation, Polarity, Upside down, OCV, OCR, Coplanarity,

Solder fillet, Lifted lead, Lifted body, Billboarding, Tombstone, Bridging, Dimension

Inspection Performance

Inspection Speed

Height Accuracy(on a KY Calibration Target)

Camera Pixel Resolution

Camera

Illumination

FOV Size

Conveyor Width Adjustment

Conveyor Fix Type Automatic

Front/Rear Fixed (factory setting)

PCB Thickness

Max. PCB Size

PCB Handling

Software

Supported Input Format

Operating System

Barcode Reading Software using System CameraBarcode Recognition

Installation Specifications

Options

Machine Weight

Machine Size

Top/Bottom Side Clearance

Supplies

�����

��������� ���� ����� ���� ���

����������� �������� ����� ��� ����� ����

Max. PCB Weight

+ 3%_

��������������� ���������!��� ���

�������"#

15μm

��$'�*�:'��������� �;������ ��� ��$'�*�:'�< ���=����� �;������ ���

30x30mm (1.18x1.18inch)

M

DL

0.4-5mm (0.015-0.20inch)

0.4-5mm (0.015-0.20inch)

0.4-5mm (0.015-0.20inch)

Ring Belt 2kg (4.4lbs), Timing Belt 5kg (11lbs) 10kg (22lbs)

0.5-8mm (0.02-0.31inch)

330x330mm (13x13inch)

L

510x510mm (20x20inch)

XL

850x690mm (33.4x27.1inch)

Dual 510x320mm (20x12.6inch) Single 510x580mm (20x22.8inch)

M DL

550kg (1212lbs) 700kg (1543lbs)

820x1265x1627mm (32.2x49.8x64inch)

1000x1445x1627mm (39.3x56.9x64inch)

L XL

600kg (1322lbs) 850kg (1874lbs)

1000x1265x1627mm (39.3x49.8x64inch)

1350x1445x1627mm (53.1x56.9x64inch)