-
8/7/2019 00_mn1780eu10mn_0003rtc
1/8
s
PLMNSBS BR7.0 system overview
MN1780EU10MN_0003
-
8/7/2019 00_mn1780eu10mn_0003rtc
2/8
Siemens SBS BR7.0 system overview
MN1780EU10MN_0003
2005 Siemens AG
II
MN1780EU10MN_0003Export Control Marks:N / NThis course is
subject to the European Export Control Restrictions.
2005 Siemens AGThe reproduction, transmission or use of this
document or its contents is not permitted without express written
authority.Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of utility
model or design,are reserved.Technical modifications
possible.Technical specifications and features are binding only
insofar as they are specifically and expressly agreed upon in a
writtencontract.
-
8/7/2019 00_mn1780eu10mn_0003rtc
3/8
SBS BR7.0 system overview Siemens
MN1780EU10MN_0003
2005 Siemens AG
III
Sub-sections
SBS BR7.0 systemoverview
MN1780EU10MN_0003
SBS overview 1
BSC architecture 2
BTSplus architecture 3
Enhanced MicroBTS II 4
TRAU architecture 5
Operation and maintenance tools overview 6
Appendix - BS240XS 7
Appendix - enhanced MicroBTS 8
Appendix - design modifications BTSplus II9
Appendix - traditional BTSE architecture 10
Appendix - PicoBTS 11
Appendix - abbreviations 12
Appendix 13
14
15
-
8/7/2019 00_mn1780eu10mn_0003rtc
4/8
Siemens SBS BR7.0 system overview
MN1780EU10MN_0003
2005 Siemens AG
IV
Warnhinweise
In elektrischen Anlagen stehen zwangslufig bestimmte Teile der
Gerte unter Spannung. Einige Teileknnen auch eine hohe
Betriebstemperatur aufweisen.
Eine Nichtbeachtung dieser Situation und der Warnungshinweise
kann zu Krperverletzungen und
Sachschden fhren.
Deshalb wird vorausgesetzt, dass nur geschultes und
qualifiziertes Personal die Anlagen installiertund wartet.
Beachten Sie bitte die ntigen Sicherheitsanforderungen und
leisten Sie durch ein problembewusstesVerhalten Ihren Beitrag zur
Verhtung von Unfllen jeglicher Art. Gefahren fr Leib und Leben /
Lebenund Gesundheit bzw. Verletzungen, die aus sicherheitswidrigem
Handeln resultieren knnen, sind voneiner Haftung durch das ICN
Training Institute ausgeschlossen.
Warnings
High voltages are present in certain parts of this equipment.
Some parts can also have high operatingtemperatures.
Non-observance of these conditions and the safety instructions
can result in personal injury or inequipment damage.
Therefore only trained and qualified personnel may install and
maintain the system.
Please ensure the necessary safety requirements are met and, by
demonstrating a responsibleattitude, play your part in avoiding
accidents of any kind. Danger to life and limb, life and well being
orinjuries that could result from actions adverse to safety are
excluded from any liability on the part ofthe ICN Training
Institute.
Atencin
Algunos elementos de este equipo presentan tensiones altas.
Incluso algunos componentes puedenpresentar alta temperatura.
No observar estas condiciones y las instrucciones de seguridad
puede causar daos personales, ascomo daos al equipo.
Por lo tanto el sistema debe ser instalado y mantenido por
personal cualificado.
Tenga presente los requerimientos de seguridad y contribuya a la
prevencin de accidentes de todandole, actuando consciente de los
problemas que pudieran surgir. El 'ICN Training Institute' no
seresponsabiliza por daos y perjuicios resultantes de actuaciones
contrarias a los aspectos deseguridad y que pongan en peligro la
salud y la vida de las personas involucradas.
Attention
Des tensions leves sont inevitablement prsentes des points
spcifiques de cet quipementlectrique. Certains lments peuvent aussi
avoir en service des temperatures leves.
La non-observation de ces conditions et des instructions de
scurit peut engendrer des dgatspersonnelles ou un endomagement du
matriel.
Pour ces raisons seulement le personnel form et qualifi est
permi dinstaller et de maintenir lesystme.
Veuillez tenir compte des exigences de scurit ncessaires et
contribuer la prvention desaccidents de toutes sortes par un
comportement conscient des risques. L'ICN Training Institutedcline
toute responsabilit pour les dangers menaant le corps et la vie /
la vie et la sant et/ou lesblessures pouvant rsulter d'actes
contraires la scurit.
-
8/7/2019 00_mn1780eu10mn_0003rtc
5/8
SBS BR7.0 system overview Siemens
MN1780EU10MN_0003
2005 Siemens AG
V
Sub-section reference
Sub-section identification Pages
1. MN1780EU10 SBS overview MN_0003 1 - 1162. MN1780EU10 BSC
architecture MN_0003 1 - 623. MN1780EU10 BTSplus architecture
MN_0003 1 - 884. MN1780EU10 Enhanced MicroBTS II MN_0003 1 - 205.
MN1780EU10 TRAU architecture MN_0003 1 - 326. MN1780EU10 O&M
tools overview MN_0003 1 - 60
This document consists of 378 pages.
-
8/7/2019 00_mn1780eu10mn_0003rtc
6/8
Siemens SBS BR7.0 system overview
MN1780EU10MN_0003
2005 Siemens AG
VI
Foreword
The training materials that are handed out are meant for
training purposes only. Theaccompanying document is not a
replacement for the official system documentation,and is not meant
for self-study. The official system documentation is the only
licensedreference work for carrying out work in the field. This
student file is your ownproperty.
At the end of the course, your course conductor will give you
some course evaluationsheets. We ask you to fill out these sheets
and would be pleased to receivesuggestions for course improvement
regarding the carrying out of the courses andmaterials used.
We at Siemens AG wish you successful training.
Training management
-
8/7/2019 00_mn1780eu10mn_0003rtc
7/8
SBS BR7.0 system overview Siemens
MN1780EU10MN_0003
2005 Siemens AG
VII
Declaration
I confirm, that the software made available to me during the
courses from the ICNTraining Institute for training and practice
purposes, will not be further copied outsideof the training.
Furthermore I assure that no software will be copied on to the
training PCs, withoutthe explicit consent of the trainer.
With my signature on the attendance list, I confirm that I will
adhere to both of theabove requests.
-
8/7/2019 00_mn1780eu10mn_0003rtc
8/8
Siemens SBS BR7.0 system overview
MN1780EU10MN_0003
2005 Siemens AG
VIII
