01 series automatic sliding doors - Plucka · PDF file01 SERIES AUTOMATIC SLIDING DOORS 2 the ultimate automatic operator — For over four decades DORMA has been manufacturing and

Sub

ject

to

chan

ge w

itho

ut n

otic

e· A

MA

02

00

2· 0

1/1

4 ·

01 S

ER

IES

For versatile door solutions.

01 seriesautomatic sliding doors—

01 SERIES AUTOMATIC SLIDING DOORS

2

the ultimate automatic operator—For over four decades

DORMA has been

manufacturing and supplying

the highest quality automatic

door operator throughout

Australia, South East Asia, the

Middle East and New Zealand.

DORMA’s tradition of

superior reliability, longevity,

performance and safety

continues to influence its

product development to supply

durable cost effective operators

with lower life cycle costs.

Using next generation

technology and powered by

DORMA’s 01 series high torque

motor-gearbox offering superior

performance, the 01 Series

motor drive can operate door

weights up to 1000kg.

This impressive automatic

sliding door operator is

extremely versatile to suit the

largest of door applications and

architectural creativity.

The elegant design profile

combined with intelligent door

automation provides the

perfect solution for

sophisticated architectural

concepts and DORMA’s

commitment to quality and

product longevity ensures that

you are investing for the future.

Profile Options Single Slide/Bi-Parting

265mm H x 152mm W

165mm H x 232mm W

Telescopic

266mm H x 245mm W

The DORMA 01 Series is

Australian made specifically

designed for high usage,

certified to 1,000,000

cycles. The motor/gearbox/lock

is supported by a 10 year

warranty when serviced by an

authorised representative in

accordance with AS5007.

The in-built UPS

(Uninterrupted Power Supply) provides full

emergency operation under

loss of mains power to

ensure that safe egress is

maintained, and when

fitted, electric security

locking remains fully

operational for when you

need it most.

The 01 Series EL Secure

electric motor lock has a

2000kg holding force and is

one of a few to be approved for

‘Secure Area Applications’ by

the Australian Government

through the Security Construction Equipment Committee (SCEC).

When longevity, security and

24 hour on call service and

response are paramount, you

can rely on DORMA. This is

why DORMA is the trusted

name and clear market choice.

ComplianceThe DORMA 01 Series fully

complies with the latest

Australian and New Zealand

industry standards and codes

including the National

Construction Code (NCC), and

is compliant with Australian

Standard AS5007 “Powered

doors for pedestrian access

and egress” independently

certified by a NATA accredited

laboratory.

Accessories/Options The DORMA 01 series is

available as a chain or heavy

duty belt drive and can be

interfaced to an extensive

range of door control and

program switches, push

buttons, presence/safety

sensors, P-E safety beams and

a wide choice of signage plates

including Braille.

hospitals & healthcare

financial institutes

shopping centres

law enforcement buildings

hotels & convention centres

government buildings

correctional facilities

airport & transport hubs

01 series automatic sliding doors

3DORMA

hotels & convention centres

government buildings

correctional facilities

airport & transport hubs

engineered for strength—

3 phase 24V high torque motor capable of moving up to 1000 kg

Direct drive gearbox incorporating high tensile steel cut gears

Fully integrated, tamper resistant electric lock enabling the door to be locked in any position

• scec approved• smart lock• partial open lock• emergency lock

• fully enclosed 8:1 gear ratio• chain drive with 1950kg tensile strength• hardened steel gears • sealed for life bearings

• purpose designed• solid construction• maintenance free

Motor Lock When the motor lock function is selected the door will fully close and lock at normal operating speed when all the safety devices are clear. If the door is obstructed while closing it will auto reverse to the fully open position, dwell time out, close and lock.

Smart LockWhen smart lock is selected the door will close and lock at normal speed overriding all safety devices. If the door is obstructed during the closing cycle it will immediately lock in position for a preset time before closing and re-locking.

Emergency LockWhen the emergency lock function is selected the door will close and lock at its maximum operating speed, overriding all the safety devices. If the door is obstructed during the closing cycle it will immediately lock in this position for a preset time before unlocking and fully closing and re-lockinglly closing and re-lock-ing. Partial Open LockWhen the partial open lock function is selected the door will open to a preset distance and lock in this position. A secure transaction can be achieved and when completed the door will fully close and re-lock.

Powered from a standard

240VAC GPO, the 01 Series

utilises a purpose designed 3

Phase 24V AC motor and a fully

enclosed secure motor lock that

is totally resistant to vandalism

and the effects of extreme

weather conditions.

Features and benefits:-

• Doors can be locked in

any position, through the

electric lock engagement.

• High speed emergency close &

lock option.

• Fully enclosed (tamper proof)

lock and digital encoder.

• Partial Open Lock -

a reduced opening

distance that allows secure

transactions.• Constant power at all

times during heavy traffic

flows – performance

guaranteed.

• Engineered to operate

door weights in excess of

300kgs.

• The motor/gearbox/lock are covered by a 10 year warranty when serviced by a DORMA representative in accordance with AS5007.• Endurance tested and NATA accredited to 1,000,000 cycles.

Heavy Duty Purpose Designed and Built Motor and Electric Motor Lock

The DORMA EL Secure electric motor lock is arguably one of the most secure and versatile locks on the market, The 01 series operator is one of only a few to be approved for ‘Secure Area Applications’ by the Australian Government through the Security Construction Equipment Committee (SCEC).

1 2 3

1

2

3


4

01 series operator models—

EL 301

• Powerful 24VAC high torque motor capable of operating a

total door weight capacity of 300kg

• Designed to suit aluminium framed, 12 / 15mm thick

frameless glass, solid core timber or custom type doors

• Robust and reliable chain drive power train with a tensile

strength of up to 1950kg

• UPS feature built in providing up to 300 continuous open /

close cycles during a power failure

• AS5007 NATA accredited

• Tested and certified to 1,000,000 cycles

EL 301 Telescopic - Framed Door

• As per EL 301 features

• Greater flexibility when a wider clear opening is

required but the available space is limited

• Available for use in both bi-parting telescopic (4 door

leaves and single sliding telescopic (2 door leaves in one

direction) applications

• Up to 3 partial open distances available

• Automatic or manual partial open available

EL 301 Secure - Motor Gearbox/ Lock

• SCEC approved for secure area applications

• Fully integrated electronic lock system enclosed in

a solid tamper resistant housing

• Security program functions include: lock, smart lock,

partial open lock and emergency lock

• Up to 48 hours of continuous lock time during a power

failure with an option to extend

• Door leaves can be locked in any position (A/HR’s

parcel transfer)

• BMS interface including open, closed, power, battery,

monitoring

• Customer approach alarms


5DORMA

EL 301 Telescopic - Frameless Glass Door

• As per EL 301 features

• Frameless glass doors provide a clear view and when in the

fully open position door leaves sit flush with the fixed panel

• Greater flexibility when a wider clear opening is

required but the available space is limited

• Available for use in both bi-parting telescopic (4 door

leaves) and single telescopic sliding (2 door leaves in one

direction) applications.

• Automatic or manual partial open available

• Up to 3 partial open distances available

• Mode dependant on partial open function

EL 301 Breakout - Framed Door

• As per EL 301 features (except door weight)

• Operates as a automatic sliding door system under normal

operation

• The emergency breakout/escape function is actioned by

applying outward pressure to the door leaf and/or side

panel which deactivates the automatic function to allow

maximum unimpeded egress

• Sliding door operator with emergency breakout capability

(maximum required egress width)

• Standard door weight 240kg


EL 301 Breakout - Frameless Glass Door

• As per EL 301 features (except door weight)

• Operates as a automatic sliding door system under normal

operation

• The emergency breakout/escape function is actioned by

applying outward pressure to the door leaf and/or side

panel which deactivates the automatic function to allow

maximum unimpeded egress

• Frameless sliding door operator with emergency breakout

capability (maximum required egress width)

• Standard door weight 200kg



6

AL 401

• Powerful 3 phase 24 VAC high torque motor

• Door weight capacity 400kg

• Stainless steel track system

• Designed to suit aluminium framed and 12mm, 15mm, 19mm thick frameless glass, solid core timber or custom type doors



• Solid 12:1 ratio gearbox with steel cut gears

AL 501

• Powerful 3 phase 24 VAC high torque motor, coupled with 12:1 ratio gearbox

• Door weight capacity up to 500kg

• Solid aluminium J-track system

• Designed to suit aluminium framed 12mm, 15mm, 19mm, 25mm thick frameless glass, solid core timber or custom type doors




AL 1001

• Powerful 3 phase 24 VAC high torque motor, coupled with 12:1 ratio gearbox

• Door weight capacity 1000kg

• Solid steel track system ensures smooth operation and long term reliability

• To suit door widths up to 3000mm


• Applications include hospital lead lined doors, large wall

dividers and industrial doors

01 series operator models—


7DORMA

01 series performance table—Door Parameters EL 301 AL 401 AL 501 AL 1001

Single panel sliding door

– Maximum Door width

– Maximum Door weight

3000mm

300kg

3000mm

400kg

3000mm

500kg

3000mm

1000kg

Double leaf sliding door

– Maximum Door width

– Maximum Door weight

1500mm*

150kg

2000mm*

200kg

2000mm*

250kg

2000mm

500kg

Technical Data

Height (Cowl) 240mm 240mm 240mm 420mm

Depth 152mm 152mm 152mm 152mm

Track Type Aluminium Stainless Steel Solid Aluminium Solid Steel

Gearbox

Purpose designed fully enclosed with steel cut gears 2 2 2 2

Drive Train

High Torque Motor 24V 3 Phase 2 2 2 2

Chain 2 2 2 2

Belt

Opening speed (Fully adjustable) 10 – 50cm/sec 10 – 50cm/sec 10 – 30cm/sec 10 – 30cm/sec

Closing speed (Fully adjustable) 10 – 40cm/sec 10 – 40cm/sec 10 – 30cm/sec 10 – 30cm/sec

Hold open time (Independent for Lock and Auto

mode)

0 – 60 sec 0 – 60 sec 0 – 60 sec 0 – 60 sec

Power Supply 240 V, 50/60Hz 240 V, 50/60Hz 240 V, 50/60Hz 240 V, 50/60Hz

Power Consumption 175W 175W 175W 175W

Ambient Temperature -15°C to 50°C -15°C to 50°C -15°C to 50°C -15°C to 50°C

Class of protection (IP Rating) IP20 IP20 IP20 IP20

Control Module

Function Modes

– Off/Lock

– Exit

– Automatic

– Open

2222

2222

2222

2222

Electronic Mode Pad

Security Interface (Mode Control & Activation)

After Hours Exit (Night bank) 2 2 2 2

Self Learn Function 2 2 2 2

Automatic reverse on obstruction 2 2 2 2

Photo electric cells (Safety beams) 2 2 2 2

Failsafe Opening 2 2 2 2

Continuous operation under power failure (UPS) 2 2 2 2

12 VDC output 2 2 2 2

Door Management System (DMS)

Customer Approach Alarms (Lock/PE/Auto)

Locking

Electric Motor lock (Fully enclosed/tamper resistant)

Lock Functions - Smart/Emergency/Pharmacy

Door Lock in any position

Standard 2 Optional

*larger door sizes upon request


8

general specification teXt —

The Automatic Door OperatorThe Automatic single slide/bi-parting door operator is to be a 240-volt fully electric DORMA 301/401/501 SERIES. Fully housed in extruded aluminium (height 265mm x width 152mm), with at least 85% Australian made content and fully comply with the relevant Australian Standards for Automatic Door operators.A NATA test and verification of compliance certificate to AS5007 section 4.6 is to be supplied prior to tendering.

The equipment will incorporate the following:A 3 phase 24 volt motor that is unable to be burnt out; a programmable logic control with current sensing and durable solid state switching of the motor; chain drive with average tensile strength of 1950kg and a 12.7mm pitch; self-lubricating gearbox with steel cut gears (not nylon or cast) for increased durability with no intermediate belts or pulleys; an anodised aluminium replaceable tracking system; and a carriage assembly supported by glass fiber reinforced nylon track wheels with fully raced and sealed ball bearings.

The operator must have positive electric braking to close the doors smoothly; fully adjustable speed control with independent settings for open, close and braking; automatic re-closing circuitry to ensure doors re-close if partially opened; intermediate selectable opening widths or climate control facility.

The operator is to incorporate a failsafe device to open doors fully on power failure or on fire signal in accordance with the NCC section D2.19 and relevant Australian Standards; monitoring warning signal to indicate when the battery power is low; automatic reversing if obstructed during closing sequence with fully adjustable sensitivity settings; automatic stop and retry if obstructed during opening sequence at a predetermined programmable time and speed; dual sets of jamb fitting high gain (up to 15m) flush mounted safety beams (PE cells) that are resistant to sunlight.

ActuationThe operator is to be actuated by two DORMA microwave movement sensors as standard equipment; the sensors must be resistant against reflected sun light and have focusable area detection settings to reduce unnecessary actuations.

The operator is to be covered by a two (2) years parts and twelve (12) months labour warranty from date of invoice.

Optional Features

Belt Drive15mm belt with curvilinear tooth design precisely formed and accurately spaced to ensure smooth engagement with pulley grooves.

Motor LockThe operator is to have a failsafe electric motor lock, compliant with the NCC section D2.19 and D2.21, which locks the doors via the drive train regardless of the door position. It is to incorporate a rechargeable battery reserve to ensure the doors remain locked for up to 48 hours under mains power failure with an option to extend.

Advanced Security Interface BoardProvides operational data output signals for building security system, i.e. open, closed, locked (refer to page 11)

Mode Pad The operator is to be fitted with a DORMA one touch operation electronic mode pad with back lit LCD screen. The mode pad is to have an input jack for the operator programming device and integrated diagnostic feedback function that provides information on door function status and servicing requirements.


9DORMA

operator specification teXt—The automatic framed/frameless/SCD

door operator to suit a single/double/four

panel sliding door is to be a 240v fully

electric DORMA EL 301 Secure Series.

Fully housed in extruded aluminium, the

operator is to include a tamper proof

fully enclosed electric lock capable of

locking the door leaves in any position.

The operator must include a monitored

battery back up system with audible

alarm and be able to provide up to 48

hours of lock function during a power

failure. The operator is to comply with

the Australian Standard AS5007.

EL 301 Single/Bi-parting/Telescopic Automatic Door Operator:

EL 301 Breakout - Framed Door the Automatic Door Operator:

The automatic single / bi-parting, door

operator is to be a 240v fully electric

DORMA EL 301 Framed Breakout

Series, fully housed in extruded

aluminium (265 mm H x 152 mm W).

The operator must be capable of

operating a total door weight up to

240kg and in emergency be able to

opened fully including the

sidelights by applying an outward

pressure. It is to include a monitored


alarm that is able to operate the door up

to 300 cycles during a power failure. The

operator is to comply with the Australian

Standard AS5007 and the Building Code

of Australia.

The automatic single / bi-parting, door


DORMA EL 301 Frameless Breakout

Series, fully housed in extruded

aluminium (265 mm H x 152 mm W).

The operator must be capable of

operating a total door weight up to 200

kg and in emergency be able to opened

fully including the sidelights by applying

an outward pressure. It is to include a

monitored battery back up system with

audible alarm that is able to operate the

door up to 300 cycles during a power

failure. The operator is to comply with

the Australian Standard AS5007 and the

Building Code of Australia.

EL 301 Breakout - Frameless Glass Door Automatic Door Operator:

AL 501 Automatic Door Operator:



The automatic single / bi-parting door


DORMA AL 401 Series, fully housed in

extruded aluminium (265mmH x

152mmW) including a stainless steel

track system. The operator must be

capable of operating a total door weight

up to 400 kg and include a monitored






of Australia.




extruded aluminium (265mmH x

152mmW) including a solid aluminium

track system. The operator must be

capable of operating a total door weight

up to 500 kg and include a monitored






of Australia.




extruded aluminium (420mm H x

152mm W) including a solid steel track

system. The operator must be capable of

operating a total door weight up to 1000

kg and include a monitored battery back

up system with audible alarm that is able

to operate the door up to 100 cycles

during a power failure. The operator is to

comply with the Australian Standard

AS5007 and the Building Code of

Australia.


10

Smart Lock

options—Motion Sensor Pushbutton

Motion/Presence Sensor

Presence Sensor Remote Mode Switch

Push to open plate Privacy Door System

Magic Switch

- Adjustable field detection W4500 x D2000mm- Flexible mounting options- Rain cover option - Operating voltage 12/24 V AC/DC

- Dual motion/presence sensor- Presence safety curtain 2mt wide x 0.20mt deep- Motion field 4m wide x 2m deep

- Presence sensor- Presence safety curtain 2mt wide x 0.20mt deep

- Palm activated rocker button- Stainless Steel finish- Dimension H80mm x W80mm

- Stylish design- Wireless- Lock/Open/Auto/Hold function- 50m operating distance

Part No. A86002000

Part No. A86712400

Part No. A86302100

Part No. D19143001170 - Finish SSS

Part No. A10120240

- Suitable for parent room door application- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering

- Touchless switch- Wall or surface mount- Suitable for hospitals, clean room and food preparation

- Suitable for disabled toilet door applications- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering - Bell output, duress and staff over-ride functionPart No. A10109035

Part No. B12010039

Part No. A10109025

Mode Pad Switch LCD Displayed symbol

- Security pin-coded- Simple one-touch mode selection- Diagnostic feedback- Customer warning alarms- Partial opening settings- Pharmacy lock control

Part No. A10110016B

SK Switches Series Key Switches

- Solid construction with stainless steel finish- Security concealed fixing points and suitable for most master key systems- SK2 Spring return switch- SK4 Four position switch

Part No. B9009036

Part No. D19143201170 - H/CAP


11DORMA

building management—

service and maintenance—When you choose DORMA, you are supported by a nationwide

network of accredited and fully trained, specialist automatic door

technicians and agents, 24 hours a day, 7 days a week.

Our specialised service covers DORMA’s comprehensive range of

door operators, door closers, industrial doors and movable walls

with our expertise extending to all models.

When you call DORMA Service you will speak to someone who

knows the products and who can offer expert advice.

Public safety and security are our paramount concern and this is

reflected in our prompt response times - making DORMA the

unrivalled industry leader in service support.

DORMA Service – at work in your locality.

With our comprehensive maintenance and repair service, DORMA ensures the functional integrity, safety and security of door systems for extended longevity. DORMA Service 24/7 Australia Ph: 1800 675 411New Zealand Ph: 0800 436 762

Advanced Security Interface Board: • Flexible interface between door operator and security/BMS

• Outputs include: locked, closed, 240V fail, battery condition,

people count etc.

• Inputs include: security interface to open, lock, emergency lock,

partial open lock, safety stop etc.

Door Management System:• System integration via building LAN (local area network)

• Up to 10 door operators can be controlled and monitored

• Remote control operation from a stand alone PC

• Provides real time dianostic feedback

• Mode control via built in time clock

Sub

ject

to

chan

ge w

itho

ut n

otic

e· A

MA

02

00

2· 0

1/1

4 ·

01 S

ER

IES

DORMA AustraliaHead Office46-52 Abbott RoadHAllAMVictoria 3803Phone 1800 675 411 [email protected]

DORMA NZ limitedHead OfficeBuilding P61-69 Patiki RoadAVONDAlEAuckland 1026Phone 0800 436 [email protected]

HD 200—

Automatic Sliding Door Operator

AM

A010

06,

08

/14,

HD

20

0*S

ubje

ct t

o ch

ange

with

out

notic

e

With the innovative DORMA HD 200 system you are investing in the future, a system that offers the perfect solution for all applications, door types and design challenges, offering whisper quite operation and convenience within a compact design profile (155 mm). Exceptionally Smart & PowerfulDORMA HD 200 heavy duty Power Drive offers dynamic acceleration and deceleration, and has opened up a new dimension with its modular control system - providing maximum power in the all-in-one modular mini drive unit (MDU). Now there is no longer a requirement to replace components when you wish to expand the functional characteristics of your system as ‘Docking’ will be the future in upgrading your technology, and now you ‘Simply plug in – and upgrade’. The elegant design profile combined with intelligent door automation provides the perfect solution for sophisticated architectural concepts and designs and DORMA’s commitment to quality and product longevity ensures that you are investing for the future.

Exceptionally SafeQuality, reliability and durability are central to the brand DORMA, which is why the DORMA HD 200 has been endurance tested to 1 million cycles and fully complies to all relevant Australian & New Zealand NCC building codes and standards. Moreover it has been independently tested by a NATA accredited facility to Australian standard AS5007 section 4.6(Exova Warrington Fire Australia,Certificate No. 30384400.1).

When choosing DORMA, you have the security and peace of mind derived from our many decades of experience in the automatics business – a history that sets DORMA apart as the clear market leader in motor drive and door control system technology. The in-built UPS (Uninterrupted Power Supply) provides full emergency operation under loss of mains power to ensure that safe egress is maintained, and when fitted, electric security locking remains fully operational for when you need it most. Exceptionally Simple InstallationThe DORMA HD 200 is user friendly to install utilising the same easy fit heavy duty track wheels and installation setup providing greater uniformity across the

DORMA automatic sliding door range. AccessoriesDORMA has an extensive range of door control and program switches, push buttons, presence & safety sensors, P-E safety beams and a wide choice of signage plates including Braille.

HD 200 Features and BenefitsDORMA Power Drive: Dynamic driving phase control for particularly powerful and responsive operation and door control.

Endurance tested to 1 million cycles to ensure reliability, durability and peace of mind.

Uninterrupted Power Supply (UPS) maintaining full operation under loss or interruption of mains power

Modular, flexible system incorporating ‘docking’ to quickly upgrade the system

Elegant slim design profile (155 mm H) Exceptionally simple & easy to install using DORMA easy fit system Option for HD 200 telescopic door entry to maximise clear opening width (refer to page 3 DWG)

EXCEPTIONALLY SMART, SAFE AND SLIM DESIGNWITH DRIVE POWER TO SPARE—

HD 200 SLIDING DOOR OPERATOR

DORMA2

THE PROFESSIONAL OPERATOR FOR INDIVIDUAL DOOR DESIGN—

Door variants with HD 200

DORMA 3

1.

12mm Thick Glass Door Hole Detail - Refer to drawing No. 2 above

HD 200 GLASS PREPARATION OPTIONS (≤1200mm width shown)

ALUMINIUMFRAMED DOOR

FRAMELESSGLASS DOOR

2.

FRAMELESS GLASSWITH DORMA CDS 43S TOP RAIL

3.

212

266

21

3

780

117

225

2154.

TELESCOPIC ALUMINIUM DOOR FRAMED

DORMA CDS 43S Top Rail Glass Detail - Refer to drawing No. 3 above

225

215

130

80

3

26621

2

32

21

5.

FRAMELESS GLASSWITH DORMA CDS 43S TOP RAIL

DORMA


14

13

11

10

12

9

Data parameters HD 200

Single-panel sliding door - Clear passage width LW- Door panel weight, max.

900-1800mm 1x200kg

Double-panel sliding door- Clear passage width LW- Door panel weight, max.

1200-2800mm 2x120kg

Telescopic 2x120kg

Techincal data of operator

Height - profile 155mm

Installation depth 215mm

Opening and closing force, max. 150N

●

Opening speed (incremental setting)

10 - 70 cm/s

Closing speed(incremental setting)

10 - 50 cm/s

Hold-open time 0 - 180 sec.

Supply voltage, frequency 230V, 50/60 Hz

Power consumption 250W

Class of protection IP 20

Compliant with EU Low voltage directive and EMC Directive

●

Manufactured to ISO 9001:2000 ●● Yes

Technical data of operator

Modular design ●

Microprocessor-controlled function programs – Lock – Automatic – Permanent Open – Half Open – Exit Only – Night-/Bank Function

● ● ●●●●●

Connections for – Fire alarm interface (FIP) – Security interface / Card Reader (BMS)

● ●

Adjustment of all basic parameters via integrated display and pushbuttons

● ●

24V DC output for external accessory ●

Read-out error memory with error codes ●

Electromechanical lock ●

Rechargeable battery pack for emergency operations (UPS) ●

Functioned module (FM)-optional extra

Door status - Open/Closed ●

Main and secondary closing edge protection ●

Panic closing function ●

Bell contact ●

DORMA4

4x60kg


DORMA

1

HD 200 Bi parting operator shown

MiniDriveUnit

56 4 3 2

At the core of the HD 200 is the prefabricated MiniDriveUnit.It has been independently tested by a NATA accredited facilityto Australian standard AS5007 section 4.6(Exova Warrington Fire Australia,Certificate No. 30384400.1).

Components

1 MiniDriveUnit 2 Power supply unit 3 Motor 4 Encoder 5 Basic module (BM) 6 Function module (FM) 7 Track rail and mounting profile

8 Rechargeable battery pack 9 Door hanger bar10 Easy fit adjustable door hanger bracket11 Belt connection 12 End pulley13 Belt tensioning device14 End stop

DORMA

200 SLIDING DOOR OPERATOR

5

87

DORMA


SYSTEM ACCESSORIES—

Mode Pad

PK Series Security Key Switches Wireless Remote Switch

P2 Pushbutton

Program switchWhen combining the system with a program switch out of the DORMA accessory range, the automatic door system even meets individual requirements and offers easy handling.

These program switches are available in various designs have been conceived for all kinds of demands. Furthermore they offer various options, from a mechanical to a full-elec tronic version.

Drive unitControl unit

3 x

1.5

mm

2

2 x

0.8

mm

2

100

m

10 x

0.8

mm

2

100

m

4 x

0.8

mm

2

100

m

2 x

0.8

mm

2

100

m

10 A

Emergency pushbutton,close to door

Inside: Pushbutton

Outside: Key switch, card reader

ModePad/Key Switch230/240 V AC

50/60 Hz

Connections

- Solid construction prestige keyswitch - Security concealed fixing points. Suitable for most master key systems- PK2 - Spring return switch- PK4 - Four position switch

- Mushroom head pushbutton- Situable for after hours egress and emergency exit- Compliant with AS1428- Diameter 45mm- Plate dimension 115mm x 40mm

- 5 Operating Modes- Emergency Exit Button- Customer Pin Code - Lock/Auto/Open/Exit/Half

- Stylish four button switch - Wireless, for ease of installation- Lock/Open/Auto/Hold functions- Operating distance up to 50m- Dimensions 115mm x 75mm

PK4 Part No. A81009004 PK2 Part No. A81009002 Part No. A10120240

Part No. NHD4016 Part No. B90009006

240V 10A GPO located RHSInside View


DORMA6

Motion Sensor Pushbutton

Motion/Presence Sensor Pushbutton with handicapped symbol

Presence Sensor Keypad 0-9

Push to open plate Privacy Door System

Touchless Switch Wireless Key Chain Remote

- Adjustable field detection W4500 x D2000mm- Flexible mounting options- Rain cover option - Operating voltage 12/24 V AC/DC

- Dual motion/presence sensor- Presence safety curtain 2mt wide x 0.20mt deep- Motion field 4m wide x 2m deep

- Presence sensor- Presence safety curtain 2mt wide x 0.20mt deep

- Palm activated rocker button- Stainless Steel finish- Dimension H80mm x W80mm- IP44 weather rating

- Palm activated rocker button with handicapped symbol- Stainless Steel finish- Dimension H80mm x W80mm x D9mm- IP44 weather rating

- Keypad for pin number access- 0-9 Keypad- Dimensions H125mm x W76mm x D15mm

Part No. A86002000 (silver)



Part No. D19143001170

Part No. D19143001170

Part No. B12004020

- Suitable for parent room door application- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering

- Wall or surface mount- Suitable for hospitals, clean room and food preparation- Dimensions H85mm x W85mm

- Suitable for disabled toilet door applications- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering - Bell output, duress and staff over-ride function

- Key chain remote control ease of door activation- Shock proof design - Operating distance up to 100m- Activation functions

Part No. A10109035

Part No. B12010039 Part No. D29301001

DORMA


7

AM

A010

06,

08

/14,

HD

20

0*S

ubje

ct t

o ch

ange

with

out

notic

e

DORMA AustraliaHead Office46-52 Abbott RoadHAllAM

c a e

f a d a cd a c a

DORMA GmbH + Co. KGDORMA Platz 158256 ENNEPETALGERMANYPhone +49 2333 793-0Fax +49 2333 793-4950www.dorma.com

Layo

ut S

. 6 –

DO

RM

A CI

-201

2 •

Engl

isch

• S

tand

11.

09.2

012

DORMA_U4-Adressen_CI-2012.indd 6 07.06.13 10:54

CS 80 MAGNEO—

WN

0

54

0

81

5

15

32

, 0

1/1

2, C

S8

0 M

AG

NE

O, D

, x. XX. xx/1

2

Subject to change w

ithout notice

Automatic Sliding Door Operator

2

CS 80 MAGNEO

Schiebetürautomatik

CS 80 MAGNEO

Automatic sliding door operator

Outstanding user convenience and unique driving behaviourexcel the automatic sliding door operator CS 80 MAGNEO. Based on their solenoid technology, DORMA realised an easy-to-handle operator system for all kinds of single-panel interior doors. DORMA's elegant Contur design is characteris-tic for the CS 80 MAGNEO. Thanks to its slender and linear construction in conjunction with two freely selectable design versions, CS 80 MAGNEO perfectly matches the overall architecture of the building to harmonise with further integrated DORMA solutions - both in the private and the public sector.

Superior designIn order to meet the high aesthetic demands of interior design, CS 80 MAGNEO is available in two different and freely selectable surface finishes. In its standard version in anodised aluminium, the magnetic sliding door operator ensures visual unity with other products out of DORMA's Automatic range. As an alternative, users may choose a stainless steel version in matt finish. This stainless steel surface finish perfectly matches DORMA Glass applications to create visual unity and a harmoni-ous overall look.

Suddenly anything is possibleThanks to the flexibility of this new system, the CS 80 MAGNEO opens up various fields of application – both in the private and the commercial sector. No matter if installed as interior door, as access door of a walk-in cupboard or as presti- gious entrance door to an office or practice, the CS 80 MAGNEO is extremely versatile as it is suitable for in-wall or on-wall mounting and may be realised as left- or right-handed version. For professionals and com-petent laymen, this auto-matic sliding door operator is straightforward to install and easy to operate, making it a preferred application, es-pecially as also existing door systems may be upgraded with the aid of the automatic CS 80 MAGNEO operator.

Safe – CS 80 MAGNEO In Low-Energy-Mode, extra-sensitive driving charac-teristics respond immedi-ately to any obstacle, thereby ensuring excellent protection as a rule. Additional safety sensors may not be required as the sliding door operator, if realised as Low-Energy application in accordance with DIN 18650 (German Industrial Standard), ANSI (American Standard) and BSI (British Standard), may even be operated without sensors. When Full-Energy-Mode is activated at the operator, the CS 80 MAG-NEO benefits from seamless integration in the DORMA system. In this case, the CS 80 MAGNEO must be equipped with optional safety sensors from the DORMA Automatic range of accessories.

Functions No matter if you would like to open the door in a full-automatic way via mo-tion detector, manually, via pushbutton or if you would like to adjust the door so that it is permanently open, the CS 80 MAGNEO already provides a large range of standard functions. It may be activated via pushbutton, radar motion detector, radio remote control, Push&Go, manually and adjusted to Permanent Open Function or Full-Energy-Mode (in Full-Energy Mode additional safety sensors are required).

Mounting In many cases, mounting the CS 80 MAGNEO does not require any specialist knowledge. Comprehensive mounting and operating instructions mean that the mounting be performed by the glass, metal and timber worker or the competent layman.

CS 80 MAGNEO – An unrivalled automatic sliding door operator.

3

Magnetic technology is silent. MAGNEO will give the proof.

A technology is suitable for everyday business if you hardly notice it: thanks to its almost noiseless and reliable function.

The CS 80 MAGNEO is driven by the magnetic and thus contactless shear wave of a linear DC motor – a movement that perfectly

matches the movement of a sliding door. The functional principle of the CS 80 MAGNEO is simple: Its silent operating

behaviour makes the system especially suitable for areas where a low noise level is required: Everywhere.

The functional principle of MAGNEO

Moving direction of electromagnetical wave

shearing force

coil

magnet magnet magnet magnet

coil coil coil coil coil stator

runner

4

+

+

++

+

CS 80 MAGNEO


CS 80 MAGNEO


Door kit glass clamping railDoor kit for wooden door panel

Cover and fixing kit for wooden door panels and glass clamping rails

The respective door kits contain all components that are required to mount the CS 80 MAGNEO operator onto the door panel for the prevailing way of mounting.

CS 80 MAGNEO is a modular system consisting of door kits, cover and fixings kits, the CS 80 MAGNEO operator and accessories. The system allows virtually any door to be configured as an automatic sliding door. The overview right illustrates which system components are required.

You will require an additional cover and fixing set if you want to mount the CS 80 MAGNEO operator on the wall.

The CS 80 MAGNEO operator is the basis for any application. It is available in three lengths in order to cover different door widths.

Door kit MANET

Cover and fixing kit for MANET

Wooden door/frame door (on-wall)

Glass door/glass clamping rail (on-wall)

Glass door/ MANET single-point fixings (on-wall)

CS 80 MAGNEO – Our modular system appears to be that simple. It is!

CS 80 MAGNEO operator incl. set for in-wall mounting

You may choose the CS 80 MAGNEO in two different surface finishes:

(E6/CO): to match automatic DORMA access systems in different designs

meet other designs out of the DORMA Glass product range

5

+++

+

+

Door kit MANETDoor kit MANET

Glass fixing system

Door kit glass clamping railDoor kit for wooden door panel

Glass door/ MANET single-point fixings*2

(in-wall)

Glass door/MANET single-point fixings*1

(on glass wall)

Glass door/glass clamping rail (in-wall)

Wooden door/frame door (in-wall)

*1 Planning and mounting by a specialist firm only *2 This application does not comply with European Union standards. There is a risk of injury in the panel-suspension area.

Ways of mounting Passage widths

The CS 80 MAGNEO operator, the fixing kit and cover kit as well as the glass clamping rail kit are available in three different lengths.

Available door panel versions

(solid-leaf construction)

from 20 to 80 kgThe door panel must be ordered separately.

Activation of opening/closing cycle

motion detector

6

CS 80 MAGNEO


CS 80 MAGNEO


Self-service provides high comfort.

The CS 80 MAGNEO is easy to handle. This automatic sliding door operator offers all important standard functions and various special functions for your convenience.

User comfort that will open doors for you: either in a full automatic way via motion detector, pushbutton (either with cable or wireless), radio remote control or with the

aid of our smooth Push&Go Function. No matter how you open the door – all functions are freely selectable: the hold-open time, Permanent Open and automatic closing.

beautiful!

7

Plenty of accessories for those who want even more

Push&GoThe door opens as soon as the door is slightly pushed in opening direction by hand and closes automatically on expiry of the individually adjustable hold-open time.

“SoftMotion“ safetyThe system is delivered in Low-Energy-Mode as standard so that the door will stop and reverse automatically on the slightest contact.

Pushbutton The CS 80 MAGNEO is activated via pushbutton. The sliding door will close automatically as soon as the user has passed the door system.

Program switch You may comfortably switch between the different operation modes (Automatic, Permanent Open and manual operation) with the aid of the internal program switch or the wall-moun-ted EPS-S3 program switch.

Radio remote control A CS 80 MAGNEO operator with a BRC radio remote system may be opened and closed with

Motion detectorAn ArtMotion motion detector is suitable to open the CS 80 MAGNEO in a full-automatic way.

Manual accessAlthough the CS 80 MAGNEO is a full-automatic operator, it may effortlessly be opened and closed manually in the event of a power failure.

Series functions as standard.

8

CS 80 MAGNEO


CS 80 MAGNEO


up to 1,038 mm

up to 1,145 mmup to 1,270 mm

LV3 LV2 LV1

2,340 mm2,090 mm

1,840 mm

up to 190 mm

Door panel width B

Passage width DBAB AB

30 mm30 mm

min. 250 mm

The sliding door on the drawing opens to the left side, thus the power supply is connected on the right side of the door (mains connection 3 x 1.5 mm²). The power supply of door systems opening to the right thus has to be realised on the left side of the operator.

Place requirement for operator including cover + end caps

A folding rule is enough to plan the system.

The door panel projection is freely selectable. It may however not exceed 65 mm and is calculated with the aid of the passage width DB and the door panel width B: (Door width B – DB) / 2 = AB

Operator length and driving path

Available lengths LV 1-3

AB = door panel projection

Please have a look at our CS 80 MAGNEO

planning aid leaflet for further assistance

during the planning your door system. If you

are interested in this leaflet please contact

your DORMA specialist dealer or visit us on

the internet www.dorma-magneo.com.

Passage width DB

Driving path F opening to the left

AB

The length of the CS 80 MAGNEO operator depends on the length of the door’s driving path (F) – which describes the distance the door has to cover for its opening or closing cycle. The respective formula is blindingly easy: Passage width DB + Door panel projection AB = Driving path F

We offer the CS 80 MAGNEO in three different lengths: LV1 for driving paths F of up to 875 mm, LV2 for driving paths F of up to 1,000 mm,LV3 for driving paths F of up to 1,125 mm.

You want to determine the required space to the nearest millimetre? Please visit us on the internet at www.dorma-magneo.com and have a look at the table “PLACE REQUIREMENT CS 80 MAGNEO”.

9

Reach your target with the proper dimensions.

Is there a door frame or baseboard? If so, how big is the projection of the frame/baseboard with regard to the surface of the wall (AW) at its biggest point? In case the AW-dimension (projec-tion) is bigger than 3 mm, you will have to shim the CS 80 MAGNEO operator.

DORMA offers a special shim plate for this purpose. In case the AW-dimension (projection) is bigger than 15 mm, the operator additi-onally has to be shimmed by others.

Shim plate

Door frame

AW-dimension

The opening direction of the sliding door determines where the power supply (mains connection) is connected at the CS 80 MAGNEO. The cable that comes out of the wall should at least be 250 mm long. See drawing at bottom of page 8.

Power supply DH & DBAU = Bottom edge of operator

AO = Upper edge of operator

and the passage width DB have to be determined when planning an automatic CS 80 MAGNEO sliding door system.

AU describes the distance between the bottom edge of the CS 80 MAGNEO operator and the passage. You may select the dimension according to your requirements and will require it when plan-ning your CS 80 MAGNEO as an on-wall mounted version.

AO describes the distance between the upper edge of the operator and the passage. You may select the dimension according to your requirements and will require it when planning your CS 80 MAGNEO as an in-wall mounted version.

On-wall mounting In-wall mounting

CS 80 MAGNEO systems with door frame or baseboard projection (AW-dimension)

10

780 – 1,190 mm

Glass thickness 8-12 mm

max

. 3,0

00 m

m

max

. 3,0

00 m

m

21

21

6 50

100

R5l 8

30

C

=

=780 – 1,190 mm

21

21

6

max. 8

max. 40

Door

pan

el h

eigh

t = D

H +

Au

– 3

DHAu

75

min. 5

6

25 – 30or

max. 8

Hei

ght o

f gla

ss p

ane

= DH

+ A

u –

39

DHAu

75

min. 5

6H

eigh

t of g

lass

pan

e =

DH +

Au

– 12

DHAu

62

min. 5

max. 8

CS 80 MAGNEO


CS 80 MAGNEO


That’s all you need: Required installation dimensions.

When planning an automatic CS 80 MAGNEO door system, you may for example start with the door panel in order to create a smooth look with regard to the passage or to use an existing door panel.

It is often reasonable to concentrate the planning on the fixing points of the operator as the fixing options provided by others are limited.




Please have a look at our CS 80 MAGNEO planning

aid leaflet for further assistance during the planning

your door system. If you are interested in this leaflet

please contact your DORMA specialist dealer or visit

us on the internet www.dorma-magneo.com.

Glaziers and joiners should keep these dimensions in mind.

The door panel is not a system component of the CS 80 MAGNEO modular system, you may place your order with a glazier or joiner.

Door panel width is freely selectable between 780 mm and 1,190 mm. The door panel projection (AB) must however not exceed 65 mm. (See page 8)

Door panel height is freely selectable (max. 3,000 mm) and calculated with the aid of the mounting height of the operator.

Glass door panels have to be made of safety glass and all glass edges have to be rounded off.

Door panel weight may amount to between 20 and 80 kg.

point fixings must be provided with drill holes and recesses before the system is mounted. The required C-dimension

LV 1: C = 575 mm LV 2: C = 700 mm LV 3: C = 825 mm

How to order the door panel: Preparation of wooden door panel Glass door panel with glass clamping rail

11

max

. 3,0

00 m

m

780 – 1,190 mm

Glass thickness 8-12 mm

90°

l 3

2

l 2

6

5563

= =C

21

21

6Do

or p

anel

hei

ght =

DH

+ A

o – 7

5

DHAo

58 69

55

max. 8 max. 8

max. 40

6H

eigh

t of g

lass

pan

e =

DH +

Ao –

111

DHAo

58

105

55

max. 8 max. 8

DHAo

58

55

max. 8

6H

eigh

t of g

lass

pan

e =

DH +

Ao –

71

65max. 8

6H

eigh

t of g

lass

pan

e =

DH +

Au

– 12

62

min. 5

DHAu

max. 8

reco

mm

ende

d: 1

,050

mm

min. 70 mm

90°

l 5

3l

51

closing edge

Drill hole for recessed

door grip

*1 The system may only be planned and mounted by a properly qualified person. Please also have a look at the CS 80 MAGNEO leaflet for systems with glass fixings.

*2 This application does not comply with European Union standards. There is a risk of injury in the panel-suspension area.


(in-wall)


(on glass wall)



We would recommend covering the door panel connection at the CS 80 MAGNEO operator with profiles so that you will be able to access the operator easily even after the wall has been closed.

Furthermore you may use a special door frame by company BOS. Please contact the manufacturer for further details:

BOS Phone number: +49 2572 203-0 Internet: www.BestOfSteel.de

Hints regarding in-wall mountingPreparation of MANET glass door panel

Preparation of optional recessed door grip

12

CS 80 MAGNEO


CS 80 MAGNEO


A. Door kits 84000071 8400007-3 -4 -5 84000077 84000077 84000071 8400007-3 -4 -5 84000077

84000078 84000078 84000078

B. Cover and fixing kitE6/C0 8400005-1 -2 -3 8400005-1 -2 -3 8400006-1 -2 -3 8400006-1 -2 -3

Matt stainless steel design 8400005-4 -5 -6 8400005-4 -5 -6 8400006-4 -5 -6 8400006-4 -5 -6

Optional shim plate, if AW (projection) = 3 to 15 mm 8402012-4 -5 -6 8402012-4 -5 -6 8402012-4 -5 -6 8402000-6 -7

C. CS 80 MAGNEO operator 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3

USA-version with UL-approval 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6

Which system components do you require?

The CS 80 MAGNEO operator, the fixing kit and cover kit as well as the door kit with glass clamping rail are available in three different lengths. The required length is determined via the driving path. LV1 for driving paths F of up to 875 mm,LV2 for driving paths F of up to 1,000 mm,LV3 for driving paths F of up to 1,125 mm.

Driving path F = passage width DB + door panel projection AB

Driving path: on-wall mountingDetermining the required length version LV1 to LV3

The CS 80 MAGNEO is a modular system. Combine your system components based on your installation requirements: CS 80 MAGNEO operator plus door kit and in case of on-wall mounting: plus cover kit and fixing kit. For some system components you must select the correct length

nents and kits are required for each way of mounting. Please note the article numbers in the ordering guide below.

DB =

AB =

F =




Please have a look at our CS 80 MAGNEO

planning aid leaflet for further assistance

during the planning your door system. If you

are interested in this leaflet please contact

your DORMA specialist dealer or visit us on

the internet www.dorma-magneo.com.

13

AW =

A. Door kits 84000071 8400007-3 -4 -5 84000077 84000077 84000071 8400007-3 -4 -5 84000077

84000078 84000078 84000078

B. Cover and fixing kitE6/C0 8400005-1 -2 -3 8400005-1 -2 -3 8400006-1 -2 -3 8400006-1 -2 -3

Matt stainless steel design 8400005-4 -5 -6 8400005-4 -5 -6 8400006-4 -5 -6 8400006-4 -5 -6

Optional shim plate, if AW (projection) = 3 to 15 mm 8402012-4 -5 -6 8402012-4 -5 -6 8402012-4 -5 -6 8402000-6 -7

C. CS 80 MAGNEO operator 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3

USA-version with UL-approval 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6

CS 80 MAGNEO: Risk for the facility operator and risk assessmentThe risk of crushing, shearing, hitting and drawing-in may not be excluded at automatic doors. When the system is delivered (in Low-Energy-Mode), the CS 80 MAGNEO meets the requirements of DIN 18650. By complying with the provisions, such as reduced driving speeds and contact forces, the system generally provides a high safety standard so that sensors are not required as a rule. At the discretion of the operator or installer and

depending on the spatial conditions and the persons using the door, it may be advisable to use safety sensors even when the system is operated in Low-Energy-Mode, for in-stance if being used by children or older persons. For this purpose, a risk assessment must be carried out by a specialist firm when the door system is being planned and commissioned. It is at the operator’s discretion whether or not a safety device is actually installed. In Full-Energy-Mode the use of additional safety sensors is obligatory.


(in-wall)


(on glass wall)



*1 The system may only be planned and mounted by a properly qualified person. Please also have a look at the CS 80 MAGNEO leaflet for systems with glass fixings.

*2 This application does not comply with European Union standards. There is a risk of injury in the panel-suspension area.

Determining the maximum AW-dimension (projection)Driving path: in-wall mounting

1. What kind of door would you like to install?

A. Which door kit do you need?

B. Would you like to mount the CS 80 MAGNEO onto the wall? If so, you will require a cover and fixing kit. Which one?

Is the passage area equipped with a door frame and/or are there any baseboards? Is the AW-dimension bigger than 3 mm? If so, you will need a shim plate.

2. What kind of power supply would you prefer? Direct power supply (flush-mounted) ......................................................................................Standard equipment

3. How would you like to open and close the door? Automatic activation (opening) as soon as the door panel is pushed by hand (Push&Go) .............Standard equipment Easy switch set (radio switch and receiver) ................................................................................. White 89000040 ..................................... Silver-coloured 89000041 ........................................... Anthracite 89000042 Additional radio switch ............................................................................... White 89000046 ..................................... Silver-coloured 89000047 ........................................... Anthracite 89000048 Recessed door grip for door panel (recommended with Push&Go Function) ............................................. 84020100 Automatic activation (opening) via pushbutton (flush-mounted version, white) ................................... 19144701170 Automatic activation (opening) via ArtMotion motion detector ................................................. Black 16614701170 ................................Silver-coloured 16614702170 .............................................White 16614703170 Additional sensor fixing set (always order 1 set for ArtMotion motion detectors) ....................................... 84020030 Automatic opening via radio control .....................................................................................Empfänger 29302002 .......................................... 29301001 ................................... Funk-Wandtaster 29301002 Additional set of radio switches (always order 1 set for radio systems) .................................................... 84020081 4. How would you like to adjust the function programs (Off, Automatic, Permanent Open)? Adjustment of function programs via internal program switch (located at end cap) ............................. 16610601175 Adjustment of function programs via external program switch (EPS-S3, wall-mounted) ...................... 16605501150 Adjustment of “Permanent Open Function“ via double-click on activator (not possible with motion detectors such as ArtMotion) ...........................................................Standard equipment 5. Do you require safety or presence sensors to safeguard the closing edges? The limited driving speeds and the low contact force provide a high safety standard when the system is operated in the . standard “Low-Energy-Mode” (system status of CS 80 MAGNEO on delivery). A risk assessment must be carried out during planning and commissioning to determine whether the use of additional sensors is required. The installation of additional sensors is optional and lies in the discretion of the facility operator. If the CS 80 MAGNEO is operated in extended “Full-Energy-Mode”, the closing edges have to be additionally protected. The respective safety equipment has to be installed by a specialist for automatic door systems.

..........................................................16576001170 IRIS ON (closing edge protection) ..................................................................................................16588801170 Additional sensor fixing set (order one set per sensor) ...........................................................................84020030 6. With locking device ........................................................................................................................... 84020130

For queries and orders relating to CS 80 MAGNEO system components, please contact:

Ordering guide. Almost ready: Your CS 80 MAGNEO.

Please enter the article numbers from the adjacent table.

Four steps to create your door system. Then everything will work automatically.

1. Measuring

3. Select system components

4. Order system components and door panels

2. Planning

Measure the passage and the required dimensions on site. Please consider the CS 80 MAGNEO planning aid leaflet to determine all important dimensions. If you are interested in this leaflet, please contact your DORMA specialist dealer or visit us on the internet: www.dorma-magneo.com.

The CS 80 MAGNEO is a modular system. The table on pages 12-13 indicates the required system components for all ways of mounting. Please enter the article numbers on the form on the back of this paper.

Place an order for the desired CS 80 MAGNEO components with your authorised DORMA dealer. Please contact the glazier or joiner of you choice to order the suitable door panel. The technical specifications for the door panel on pages 10 and 11 will help you during the placement of your order.

CS 80 MAGNEO. The information on pages 8 to 11 in this brochure will help you.

16

CS 80 MAGNEO


CS 80 MAGNEO


Technical specifications

Operator length without cover with cover 1,750 mm2,000 mm2,250 mm

1,840 mm2,090 mm2,340 mm

Operator heightWith MANET single-point fixings With glass clamping rail With wooden door panel

62 mm75 mm75 mm

Overall depthOn-wall mounting (without shim plate) In-wall mounting (only operator profile)

60 mm50 mm

Operator weight

8.6 kg9.4 kg

10.2 kg

Speed 0.2 – 0.6 m/sThe speed is calculated with the aid of the driving path and the door panel weight. During the commissioning, the system will adjust automatically in accordance with the prevailing standards and regulations.

Power supply

Fuse protection, by others 10 A

Power consumptionStand-by-mode Automatic Function

3.7 Wmax. 60 W

Class of protection IP 20

Temperature range 0 – 40 °C

Required operating conditionsOnly suitable for dry environments non-condensing

Operating noise max. 55 db (A)Measured at test setup. The noise level depends on the door and the prevailing substructure.

Low-Energy-Mode

Full-Energy-Mode with safety sensor

Compliant with DIN 18650, ANSI, BSI

Manufactured to ISO 9001

Connectable accessory

Pushbutton, radio remote control and radio switch

Motion detector

External program switches

Safety sensors for main and secondary closing edge

= yes = optional

DORMA system components of the modular system Art. No.

CS 80 MAGNEO operator incl. set for in-wall mounting LV1 84010001 LV2 84010002 LV3 84010003USA-version with UL-approvalLV1 84010004 LV2 84010005 LV3 84010006

Cover and fixings kit for wooden door panels and glass clamping rail E6/COLV1 84000051 LV2 84000052 LV3 84000053 Matt stainless steel designLV1 84000054 LV2 84000055 LV3 84000056

Cover and fixings kit for MANET E6/COLV1 84000061 LV2 84000062 LV3 84000063Matt stainless steel designLV1 84000064 LV2 84000065 LV3 84000066

Door kit for wooden door panel incl. floor guides 84000071

MANET door kit incl. floor guides

E6/CO 84000078

Matt stainless steel design 84000077

Door kit for glass clamping rail incl. floor guides E6/C0 LV1 84000073 LV2 84000074 LV3 84000075Aluminium profile, mill finish LV3 84000076

Shim plateLV1 84020124LV2 84020125LV3 84020126

Recessed door grip for wooden or glass doors

E6/CO 84020101

Matt stainless steel design 84020102

17

Profiles in stock lengths 6,250 mm Art. No.

Mounting profile for glass-fixing system

Mill-finishE6/C0

Matt stainless steel design

34002701120 34002702120

34002703120

Fixing profile for glass-fixing system 34002801120

Cover profilefor glass-fixing system

Mill-finishE6/C0


34002901120 34002902120

34002903120

Internal cover 75 mm

Mill-finishE6/C0


34003003120 34003002120

34003004120

Internal cover 62 mm

Mill-finishE6/C0


34003103120 34003102120

34003104120

Distance profile 34003401120

Operator profile 34002502120

Accessories: Operator and door panel Art. No.

Set for in-wall mounting 84020002

Set for on-wall mounting LV1 84020003LV2 84020004LV3 84020005

Set for on-wall mounting (for glass walls)

E6/C0Matt stainless steel

design

84020006

84020007

Mains cable for8402004084020041840200428402004384020044840200458402004684020047

End capsMill-finish

E6/C0Matt stainless steel design

Mill-finishE6/C0


840200708402007184020072840200738402007484020075

Cover profile set for wall connection 84020090

Guide rail for wooden door panels 1,125 mm 84020112

Floor guide for in-wall mounting For wooden door panelsFor glass door panels

840201238073600099

CS 80 MAGNEO locking device 84020130

Floor guide on metal sheet (frame) 92212001

External floor guide rail (glass) 33438001150

Pushbuttons and program switches Art. No.

Pushbutton, flush-mounted design, whiteSystem 55 19144701170

Easy switch set (radio switch and receiver)White 89000040Silver-coloured 89000041Anthracite 89000042Additional radio switchWhite 89000046Silver-coloured 89000047Anthracite 89000048

Program switch EPS-S3 16605501150Internal program switch (no picture) 16610601175Internal program switch USA 16610651175

Comfort switch with BRC radio technology Art. No.

BRC-R receiver 29302002

Additional set of radio switches 84020081(always required for radio systems, no picture)

BRC-H hand-held transmitter 29301001

BRC-W large-surface pushbutton 29301002

Motion detectors and sensors Art. No.

ArtMotion radar motion detectorWhite 16614703170Silver-coloured 16614702170Black 16614701170

ACTIV8 ONE ONMotion detector and closing edge protection 16576001170

IRIS ONClosing edge protection 16588801170

Additional sensor fixing set 84020030(order one set per sensor, no picture)

DORMA GmbH + Co. KGDORMA Platz 158256 ENNEPETALGERMANYPhone +49 2333 793-0Fax +49 2333 793-4950www.dorma.com

Layo

ut S

. 6 –

DO

RM

A CI

-201

2 •

Engl

isch

• S

tand

11.

09.2

012

DORMA_U4-Adressen_CI-2012.indd 6 07.06.13 10:54

DORMA Australia Head Office46-52 Abbott Road,Hallam, Victoria 3803Telephone (03) 8795 0270Facsimile (03) 8795 0696Toll Free 1800 675 411

DORMA NZ LimitedHead OfficeBuilding P61-69 Patiki RoadAvondale

c a d e e e ac e

WN

05

4 0

81

51

53

2,

01

/12

, C

S8

0 M

AG

NE

O,

D,

x. X

X. x

x/1

2

Sub

ject

to

chan

ge w

itho

ut n

otic

e

PRIVACYDOOR SYSTEM—Providing solutions for disabled access

The PDS complies with the following: . NCC Access for people with a disability . NCC Braille and tactile signs . AS5007-2007 Power doors for pedestrian access and egress

Barrier-free solutions for people with disabilities (PWD)

The DORMA Privacy Door System

(PDS) provides unhindered

automated access for people with

d a e e ca e fi ed to either swing or sliding door

operators depending on the

required design applications.

The PDS offers the following features:

. Simple to use (amenities and parent rooms) . Flexible design (sliding or swing) . Robust and reliable operation . Braille and tactile signs . Surface mount or cavity slide . Electric lock with door closed function . Built in or key switch staff override function for use in emergency . BMS interface capability . Duress alarm I/O . Bell output . MLAK- Key accessible using Master Locksmiths Access Key (option)

O a a Head Office

46-52 Abbott Road, Hallam, Victoria 3803

T 1800 675 411

[email protected] www.dorma.com.au

Plate FeaturesThe internal/external mounted

PDS plates are designed

using a polycarbonate

membrane that is vandal

resistant, UV stabilised and

a affi c a ed

PDS operation: . External Plate (standard)When vacant green indicator illuminated, press the outside Push to Open button to activate and open the door . External Plate MLAK (option) when vacant green indicator illuminated, insert master locksmiths accessible key and turn to activate and open the door . Once inside press the Push to Lock button to secure the door (outside button and key activation is switched off and Occupied red indicator is now illuminated) . To exit simply press the Push to Open button

Internal PlateIncluded on the plate are

solid push buttons and

stainless steel housed red/

green indicators providing a

wide viewing angle and

IP67 rating.

(265mm H x 230mm W)

External Plate (Standard)

Internal Plate

External Plate (MLAK Option)

External PlateIncluded on the plate is a solid push

button and stainless steel housed red/

green indicators providing a wide

viewing angle and IP67 rating.

(205mm H x 230mm W)

External Plate MLAK (option)The MLAK external plate option features the DORMA Prestige Key switch complete with an Australian oval cylinder keyed to the MLAK (Master Locksmiths Access Key). The MLAK-PDS plate option is an innovative system that enables people with disabilities to gain 24/7 access to a network of public facilities that utilise this system. People with a disability are able to purchase a MLAK master key from a member of the Master Locksmiths Association which will automatically open facilities such as accessible toilets and other facilities which are fitted with the DORMA MLAK-PDS plate. Included on the plate is the Prestige Key switch keyed to the MLAK and stainless steel housed red/ green indicators providing a wide viewing angle and IP67 rating.(205mm H x 230mm W)

DORMA PRIVACY DOOR SYSTEM

AMA02005· 07/14· PDS

O e ea a d Head Office

Building P, 61-69 Patiki Road, Avondale, Auckland 1026

T 0800 436 762

[email protected]

Documents

01 series automatic sliding doors - Plucka · PDF file01 SERIES AUTOMATIC SLIDING DOORS 2 the ultimate automatic operator — For over four decades DORMA has been manufacturing and