Upload
smejiagonzales
View
212
Download
0
Embed Size (px)
Citation preview
7/28/2019 0201000RIODET_SHP00
1/2
2
3
1
0000M000
0ms
RIODET
Features under 1 millisecondresponse time.Proven to have an excellent sealfor seismic applications(PVC water seal)Safe against static electricity,electromagnetic inductions andextraneous electric currentsSpecifically designed for harsh
conditions.
Seismic RIODET HP is a highpressure highly water resistant,strong and reliable detonator withexcellent response times.
This seismic detonator line aremanufactured in a variety oflengths, with single wire 0.6 mm in
diameter making seismic RIODETHP suitable for extreme conditionsand able to withstand temperaturesof up to -40C.
Seismic RIODET HP is designed sothat the short circuit device can beremoved easily before use.
They also provide a high level ofsecurity against static electricity,extraneous electric currents, andelectromagnetic radiation producedby radio transmitters.
Seismic RIODET HP feature a specialPVC water seal bushing, which hasbeen proven to be optimal for thisapplication.
Seismic RIODET HP are rigorouslytested under 10 kg/cm2 for 48hours, making it optimal for difficultconditions.
RIODET HP
Advantages
3.Waterresistant labelwhichincludes
Delay Period,Length andLot Number.
2.
#8 strengthdetonatorfitted with adoublecrimp.
R I O D E T HIGH PRESSURE
1.Single copperwire withpolyethylenecoating.
Electric High Pressure Seismic Detonator
www.maxam.net
020108RIODET_SHP00
SISMIC0
6 m
7/28/2019 0201000RIODET_SHP00
2/2
0,60
0,60
Special Packaging, Class 1.4B(nominal values)
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIODET. RIODET detonators must not be used in flammable environments such as methane or coal dust. MAXAMstrongly recommends not to use RIODET products with detonators and/or initiation systems supplied by other manufacturers in the same blast and declines all liability in these cases.
The information contained herein (the Information) is not exhaustive and subject to periodical review. The data contained herein may vary on account of the particular operating and maintenance conditions andof external factors, such as humidity, temperature, or pressure. Maxam Europe, S.A. and/or its affiliates (MAXAM) do not warrant or make any representation regarding the accuracy or completeness of theInformation. MAXAM further reserves the right, in its sole discretion and without prior written notice, to modify the products described herein (the Products) and/or their specifications.The use of the Products is an intrinsically dangerous activity and must, consequently, be restricted to qualified and trained users in possession of any necessary permits and licenses, and comply at all times withappropriate safety and risk prevention measures and with the applicable law. The use, storage, or otherwise handling, of the Products may be subject to local regulations and restrictions, which must be examinedand observed by the user.This document and any accompanying information (the Documentation) is not intended to constitute, and shall not be construed as, an offer or contractual commitment on MAXAMs side. MAXAM expresslydisclaims any liability towards third parties with regard to the Documentation. For further information about the Products, please contact your distributor or sales representative directly.
Electrical Characteristics(Nominal values)
0201000RIODET_SHP00
Initiation Time(Nominal values)
Contact your local MAXAMrepresentative for further information.
GrossWeight
(kg)
NetWeight
(kg)
WireDiameter
(mm)
Units/BoxWire
Resistance
(ohms/m)
Length
(m)4
6
500
250
0,065
0,065
13
18
15
20
Bridge Resistance (ohms)
Trigger pulse (mW.s/ohm)
Safety Current A
Recommended minimum
firing current for response
time of less than 1 ms
Firing Current
0,3-0,5
8-16
0,45
5
RIODET detonators must be stored at moderate temperatures in a dry and well ventilated place.
Distributor:
LEGAL WARNING AND EXCLUSION OF LIABILITY
Class
UN Number
Transport Classification
1.4B
UN 0255
Special Packaging
1.4S
UN 0456
280mm
560mm
295m
m
RIODET HP
MAXAM CIPENSA, S.A.C.Calle Alcanfores 495 - Oficina 602Miraflores, LimaTel. 511-4474648Fax. [email protected]