3. To install the base stand, align the screw holes, then secure with a screw driver (not included) using the 3 screws provided.

INSTALLING THE BASE STAND1. Lay the TV down on a flat surface with the back side facing up, and ideally at the edge of a table so that the base of the TV slightly overhangs

on it. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed beneath the screen.2. To install the TV stand, first attach the stand support to the TV by using 3 screws.

Align with the screw holes then use 3 screws to fix the stand support to the TV.

QUICK-START GUIDEEnjoy your new TV sooner using this simple guide. 23.6” (60cm) HD LED LCD TV with Built-in DVD PlayerG24HTC16

Screw x 3

screw in

Screw x 3

TV Front Base Stand Front

screw in

1 2

3

PARTS LISTIn the box you will find:1 x 23.6” (60cm) HD LED LCD TV1 x TV Stand Support1 x TV Base Stand1 x Remote Control2 x AAA Batteries6 x Screws1 x Instruction Manual (not pictured)1 x Quick Start Guide (not pictured)

CONNECTION1 Headphone2 PC AUDIO / VGA3 Y, PB, PR / AUDIO

(L/R)4 Digital Audio Output

(Coaxial)

5 RF6 HDMI7 USB8 VIDEO / AUDIO (L/R)

WHAT YOU WILL NEEDScrewdriver (for stand installation)Antenna cable

AUDIO

1 2 3 4 5

RFDigital Audio Output

(Coaxial)PC AUDIO HEADPHONE VGA Y Pb Pr

Rear Right Bottom View of TV

6 7 8

USBHDMI RL

AV INPUT

VIDEO

Rear Right Side View of TV

G24HTC16_QSG_160627-V2_Annie.indd 1 29/6/16 下午4:59

CONNECT TO THE POWER1. Connect one end of the RF coaxial cable to the aerial

socket on the wall and the other end of the cable to the RF (75Ω) socket at the rear right bottom of your TV.

2. Unwind the mains cable to its full length. Connect the mains cable to the mains socket after you have completed all the connections.

3. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.

4. In standby mode, press the button on the rear panel of the TV or on the remote control to turn the TV on. The red LED indicator will turn blue.

EASY SETUP SCREEN

4

5

• Do not connect the TV to the mains supply until you have completed all the connections.

• If you watch TV using a set-top box, simply connect your TV and set-top box via a HDMI cable and select HDMI in the Input Source menu.

If you are going to watch TV using a set-top box, press the EXIT button on the remote control then skip this section. Then press the INPUT button on the remote control to select HDMI mode.

RFDigital Audio Output

(Coaxial)PC AUDIO HEADPHONE VGA Y Pb Pr

1

2

RF coaxial cable(not included)

OR

To the mains socket

First Time SetupOSD Language EnglishMode Setting Home ModeCountry AustraliaAuto Scan DTVLCN

Move Adjust MENU: Return EXIT: Exit

OnStart

Please connect your aerial, change any settings you wish and select Start thenpress OK to start tuning.

First Time SetupOSD Language EnglishMode Setting Home ModeCountry AustraliaAuto Scan DTVLCN

Move Adjust MENU: Return EXIT: Exit

OnStart

Please connect your aerial, change any settings you wish and select Start thenpress OK to start tuning.

First Time SetupOSD Language EnglishMode Setting Home ModeCountry AustraliaAuto Scan DTVLCN

Move Adjust MENU: Return EXIT: Exit

OnStart

Please connect your aerial, change any settings you wish and select Start thenpress OK to start tuning.

First Time SetupOSD Language EnglishMode Setting Home ModeCountry AustraliaAuto Scan DTVLCN

Move Adjust MENU: Return EXIT: Exit

OnStart

Please connect your aerial, change any settings you wish and select Start thenpress OK to start tuning.

First Time SetupOSD Language EnglishMode Setting Home ModeCountry AustraliaAuto Scan DTVLCN

Move Adjust MENU: Return EXIT: Exit

OnStart

Please connect your aerial, change any settings you wish and select Start thenpress OK to start tuning.

1. The first time you turn the TV on, it will go straight into the First Time Setup menu. Press the buttons to select your desired language to be displayed on the menu. The default on-screen menu language is set as English.

4. Press the button to select Auto Scan. Press the buttons to select DTV / ATV / DTV + ATV.

5. Press the button to select LCN (Logical Channel Number). Press the buttons to select On / Off.

2. Press the button to select Mode Setting. Press the buttons to select your desired mode. If select Store Mode, a pop-up menu will be display. Press the OK button to confirm or press any button to cancel and return to the Mode Setting menu.

3. Press the button to select Country. Press the buttons to select the country option.

6. Press the button to select Start and then press the OK button. Channel tuning will commence. This operation may take up to few minutes. The display will show the progress of the tuning and the number of channels found.

Auto Scan

Scanning CH22

Digital Channels Found:DTV :0 Radio :0 Data :0

MENU: Stop EXIT: Exit

(QSG-G24HTC16-160629V2)

G24HTC16_QSG_160627-V2_Annie.indd 2 29/6/16 下午4:59