Upload
matthew-hodge
View
212
Download
0
Embed Size (px)
Citation preview
1. Check cdsl10 or nsdl10 is already installed. 2. Check ORACLE must be 9.2 or higher than it. If Oracle version is lower than it than 9.2 than install ORACLE
before shifting DPORA10 or CDSL10 to DPORA20 or CDSL10
Note: Do not install oracle on drive “C”.
Installation process is divided into two parts: Part 1: Oracle Installation. Part2: Product Shifting (Shifting of DPORA10 and CDSL10 to DPORA20 and CDSL20)
For Oracle Based Products: Server Machine Configuration :
For Windows 32 bit Operating System
Windows 2003 Server (32 bit). Oracle9i (Release 9.2 or Above) Server or Oracle10gR2. Processor Dual-Core Intel(R)Xeon Processor , 2-4GB RAM CPU Recommended. LAN Card 100/1000 Mbps. CD ROM. HDD 160 GB or Above 30-40GB Free space on C-Drive.
64 Bit Operating System Windows 2003 Server(64bit).* Oracle10g R2(64bit). Processor Dual-Core Intel(R)Xeon Processor, 2-4GB RAM CPU Recommended. LAN Card 100/1000 Mbps. CD ROM. HDD 160 GB or Above 30-40GB Free space on C-Drive.
Note:A Internet connection will be required on the system (in network) for regular product updating and
activation Please make sure that Oracle/Operating System must be of Similar Bit Size. Our Desktop Application Will not be deployed on Windows(64 bit).
Follow the following steps to install oracle9i:
There should be oracle database dump at which system you are installing software and be sure it will be higher than 9.2.
Path oracle_dump\Oracle-9.2 Stage1\install\win32\setup.exe.
Run Oracle Setup. Oracle Universal Installer :
Welcome window will open. Click on next.
1. Double click on it to run oracle setup
2.Click on next.
3.Click on next.
Enter or select the drive where you want to install oracle and make sure it will be except “C “ Drive.
*There must be at least 40-50 GB space in drive where oracle is being installed
4.Select Oracle9i Database 9.2.0.1.0 if you are installing oracle on database server.
5. Click on next.
6. Select Enterprise Edition.
7.. Click on next.
9. Click on next.
8. Select General Propose.
10. Click on next.
12. Click on next.
11. Enter database name you want to create (for example : CDSL1011).
13. Click on next.
14. Click on next.
15. Click on Install.
There are three stage of oracle to be installed . First stage is installing here.
16. Write stage 2 (as shown ) and click on OK.
17. Write stage 3 (as shown ) and click on OK.
18. After completing third stage, Next option enabled. Click on Next.
19. It will create clone database, wait for completion.
20. Wait for completion of database creation.
21. Enter same password in each field (e.g. s). It is mandatory.
22. Click on Exit .
CDSl101
CDSl101
24. Click on yes
23. Installation is completed & Quit from this Oracle Universal Installer.
Step1 : Create a new folder named of your product in any drive (for example E:\cdsl20) Download cdsl20.zip ,Deploy60.zip,dllsetup.exe,utilcap60.exe and licclient60.zip from www.shilpisoft.com
under Download Option in cdsl20 folder.
DownloadsDownloads
• Step2: Extract cdsl20.zip, deploy60.zip, utilcap60.zip and licclient60.zip in CDSL20• Step3: Run deploy60.exe, to run follow the following steps:
• Double click on deploy60.exe
• Following window will open:
Click on next
Click on next
Tick on this
Click here to change the path
Click on next
Click on next
Changed path
Un-tick these options
Click on Next
Click on next
Click on next
Note: Do not cancel this processing
Click on Finish
Step4 : Run dllsetup.exe. Double click on dllsetup.exe, following window will open
Click on Next
Click on Next
Tick on Custom
Click on Next
Click here to change the path
Enter required path
Click on Ok
Click on Next
Click on Install
Note: Do not cancel this processing. Wait for the completion
Click on Finish
Note: Do not cancel this processing. Wait for the completion
Step5: Rename sql.ini in CDSL20 folder
Take new sql.ini from cdsl120 folder installed at Shilpi office computers, do entry of database name (for example: cdsl1011) and put this file in cdsl20 folder
Make cofile.dll To make cofile.dll following steps:
Open notepad Enter company name and database name Save this file with the name cofile.dll
Put this file in cdsl20 folder Now, Copy all qrp from cdsl10 folder to cdsl20 folder
Open liceclient60.exe form cdsl20 folder, Download Sql Talk and Print files
Click on downloads
Tick on Print Files
Tick on Sql Talk
Select Product ID cdsl20
Click on Download Now
After downloading SqlTalk and Print Files ,this message will display.Click on OK
Login software(cdsl20)
Import signature first time
Check data with signature is showing or not in client master If get an error as shown in image
Connect database via utilcap60.exe from cdsl20 folder
Go to Maintenance>>Initialize Maintenance Level
Tick on capital Market
Click on Proceed and wait for completion
Click on OK
Login software(cdsl20)