Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
ePanther Password Change
Reconnecting to UWMWiFi on iOS devices
Step #1
Click “Dismiss” if you receive a warning
about not being able to connect to
UWMWiFi.
Step #2:
Navigate to:
Settings ->WiFi
And tap on the blue arrow to the right of
UWMWIFi
1
NOTE 1: If you already have your iOS device (iPhone, iPod Touch or iPad) set up for UWMWiFi, you may not be able to
connect to the UWMWiFi option after you change your ePanther password.
To rejoin the UWMWiFi network, follow these instructions.
Step #3:
Click “Forget this network.”
NOTE 2: If you do not see “Forget this
Network,” skip to page 5.
Step #4:
Confirm by tapping
“Forget”
2
Step #5:
Back on the “Choose a network” screen,
select UWMWiFI.
Step #6:
Enter your ePantherID and new password
and tap “Join.”
Step #7:
Accept the Certificate.
You should now see “UWMWiFI” as your
selected wireless network.
3
4
NOTE 2: If you did not see “Forget this Network” in Step 3, follow these instructions to get reconnected to UWMWiFi.
You can safely ignore these instructions if you have already reconnected to UWMWiFi using the previous steps.
Step #1a:
Go to Settings -> General -> Profile -> and
tap on the UWMWiFi profile
Step #2a:
Tap “Remove.”
Step #3a:
Click “Remove” to confirm the removal of
the UWMWiFi profile.
5
Step #4a:
If prompted, enter your iOS passcode.
Step #5a:
Go to Settings -> Wi-Fi and connect to
Public.
6
Step #6a:
Once connected to Public, open up a Web
browser and go to the Apple Automated
Installation Web page at
UWMWiFi.uwm.edu. Once on the
UWMWiFi.uwm.edu page, tap on “Apple
Automated link.”
Step #7a:
Read the Liability Release for the
Automated Tool for UWM WiFi and the
click on the “Apple automated tool” link.
Step #8a:
To complete the download, enter your
ePantherID and password when
prompted.
Step #9a:
To The following screen will appear.
Tap install.
Sept. 2013
Step #10a:
The following screen will appear with
information about what the Profile will
do. Tap install.
Step #11a:
If the device has a passcode lock, type in
the code.
Step #12a:
Now go into Settings -> Wi-Fi then tap
UWMWiFi.
Step #13a:
Type in your ePantherID and new
password. Then tap “join.”
You should now see “UWMWiFI” as
your selected wireless network.
7
You have now configured your device to connect to the “UWMWiFi” option when you enter a
building with UWM WiFi.
Questions? Problems? Contact the UWM Help Desk at 414-229-4040 or at GetTechHelp.uwm.edu
Personal device set-up assistance available Monday–Friday, 8 a.m.–5 p.m. at:
UWM Walk-in Help Desk, Bolton 225A
Library Learning Commons, IT Consultant Desk