1 May 2015. Group Overview Spark Minda, Ashok Minda Group is a leading Automotive Component Group. Founded in 1958 by Late Shri S.L. Minda. With

Slide 11

GROUP & MSL-CD PROFILE

Dynamic

Innovative

ProfitablePreferred Employer

Preferred Supplier

May 2015

Slide 2

Group Overview Spark Minda, Ashok Minda Group is a leading Automotive Component Group.

Founded in 1958 by Late Shri S.L. Minda.

With 32 Plants globally employing more than 14,000 people.

Strong customer base with supplies to all major Indian & Global OEMs with supplies across all Vehicle Segments.

Group Turnover: 2014-15 : INR 3200 Cr. / USD 533 Mn.

Joint Ventures/Collaborations with global leaders- Furukawa of Japan- Stoneridge of USA- VAST Access System of USA- Silca of Italy- UzAvtosonat of Uzbekistan- Orbital of Australia

Locations

India: 26 Plants

Overseas : 6 Plants

Offices in Japan & Russia.1 USD= 60 INR

Slide 3

Srl.No Contents

1 Overview of SPARK Minda, Ashok Minda Group

2 Overview of MSAI-Component Division

3 Engineering & Manufacturing Capability-MSAI India

4 Overview Of Minda KTSN, Germany

5 Engineering Capability-MKTSN

Slide 4






6Joint Business Model for Executing Customer Programmes

Slide 5

India

27 Plants

Uzbekistan

1 Plant

Germany

1 Plant

Japan

Engg./ Mktg. Office

Indonesia

1 Plant

Vietnam

1 Plant

Russia

Rep. OfficePoland

1 Plant

Our Global Presence:

Slide 6

Business Units

(India)

6

Slide 7

Haridwar (1)

Pantnagar (3)

Pithampur (1)

Aurangabad (1)

Pune (5)

Mumbai (1)

Chennai (5)

Our Presence - Domestic

Delhi NCR (9)

Gurgaon(1)

Plant/Unit

Group Corporate

7

PLASTIC DIVISION

Total: 26 Plants

Slide 8






Slide 9

Minda SAI - Component Division (CD)-Plant-1

Particulars Description

Plant Area 10,000 Sq.M

Turnover (FY 15) 70 Cr (FY 16 Proj.-80 Cr)

Employees 233 Nos.

No. Of M/CsInjection Molding M/C: 40

Power Press:08

Slide 10

CD Plant-1 Overview

Slide 1111

Minda SAI - Component Division (CD)-Plant-2 (SOP By Sep’15)

Present Photos: Inside View

Slide 12

Louvers

Cylinder Head Cover

Battery Trays

Glove Box

Oil Sump

Center Console

Trunk & Exterior Trim Parts

Spark Minda Group –Plastic Product

Seat Molding

Cup Holders

Slide 13

Further Product Range

Connectors Terminals

Fuse Box and Fuse CoversCable Protectors

Slide 14

Customers4 Wheelers

2/3 Wheelers

CUVs

Tractor

Construction

Equipment

Others

Slide 15

Overview of SPARK Minda, Ashok Minda Group

Overview of MSAI - Component Division

Engineering & Manufacturing Capability – MSAI India

Overview of Minda KTSN, Germany

Engineering Capability – MKTSN

Slide 16

Engineering Capability

• Product Engineering− Feasibility Study− Bench Marking & Tear down− Packaging Study− Product Design & CAD

modeling

• Design Validation− Plastic flow analysis− Structural analysis

• Prototype, Jigs & Fixtures − Rapid proto (CNC machined

plastic / SLA / SLS / Silicone Molding)

− Soft tooling: Injection mold Sheet Metal

− Design & Development of Jigs, Gauges & Fixtures

• Mold design− Plastic Injection mold− Stamping tool design

• Production Tooling− Injection mold − Sheet Metal

Slide 17

Software in Engineering Department

Sl Software Usage No. of Licenses

1 CATIA For product design, drafting & Kinematics 03

2 Pro-E For product design & tool design 03

3 Solid Works For design of sheet metal components and press tools 01

4 Moldex 3D Mould flow analysis 01

5 UG-NX (9) For product design, drafting & tool design 01

6 Auto CAD 2D drafting for internal use 04

Slide 18

Feasibility Study• Bench Marking &

Tear Down study

• Packaging Study

• Product Design & CAD Modeling

Product Engineering - Feasibility Study

Slide 19

Hyundai

Alto OMNI A star Santro

Snap

Dim (LxWxH) mm 176x63x68 46x48x28 135x92x60 127x101x54

Part Weight (gm) 42.8 7.9 45.2 50.35

Part Thickness (mm) 1.3 - 1.5 1.5 - 1.6 1.4 - 1.8 1.2 - 1.7

Material PP Nylon-66 PP-T20 PA-66

ParametersMSIL

Product Engineering - Benchmarking & Tear Down Study

Slide 20

Product Engineering - Product Design & CAD Modeling

Slide 21

Design Validation - Plastic Flow Analysis

Slide 22

Design Validation - Structural Analysis

1. Strength Analysis Study 2. Structural Simulation

Slide 23

Prototyping, Jigs & Fixtures

Rapid Proto (CNC machined plastic/ SLA/ SLS/ Silicone Molding)

Slide 24

Prototyping, Jigs & Fixtures

Design & Development of Jigs, Gauges & fixtures

Inspection fixture

Inspection Gauge

Assembly Fixture EOL Testing Fixture

Slide 25

Mold Design - Plastic Injection Mold

Core Half Cavity Half

Core Half Cavity Half

Slide 26

Production Tooling

Production Tooling : Injection Mold, Sheet Metal tools

Slide 27

Cover

Base

Existing Design

Part Name : BIM Base Assembly; Customer : Renault Nissan

Modified DesignCover

Base

Closure

Partnering with Customers During Design Stage

Slide 28


Design of the lock modified for functionality

Part Name : BIM Base Assembly; Customer : Renault Nissan

Existing Design Modified Design

Slide 29

Existing Design

Proposed New Design for Locking of the Part

Actual Snap

Project Status:

1. T1 samples submitted in 04 weeks.

2. Insertion & Removal force found to exceed the specs.

3. Part under production.

Part Name: Floor Channel; Customer: TATA Motors


Slide 30

• Part Name: Battery Tray Assy. • Customer: Maruti Suzuki• Application: Under hood part• Material: PP Long Glass Fiber 40%

Snap of Existing Parts

New Design

Battery tray mounted on the vehicle

Version A Version B

New Project – Replacing Existing Metal Part by Plastic

Slide 31

New Project – Replacing Existing Metal Part by Plastic

• Part Name: Cylinder Head Cover Assy.• Customer: Isuzu• Application: Engine Compartment• Material: PA 66 30% Glass Filled

CoverBaffle Plate

Cap

Cover & Baffle Plate are joined together through vibration welding technique

Cap is joined to Cover through ultrasonic welding technique

Slide 32

Manufacturing Facility

M/C TONNAGE NO. OF M/CS MAKE

1250 T 01 FCS

820 T 01 HAURONG

650 T 02 FERROMATIK

420 T TO 520 T 08 WINDSOR,KRAUSS MAFFEI,HAURONG

320 T 01 BATTENFELD

250 T 03 NETSTALL, FERROMATIC

150 T 07 FERROMATIK, WINDSOR,TOSHIBA

90 T TO 125 T 04 SUPER MASTER, ANGEL

50 T TO 85 T 11 TOSHIBA, SUPER MASTER

50 T 02 TOYO

TOTAL 40

Slide 33

Outstanding Contribution to SCM – Volvo Eicher

New Product Dev – Volvo Eicher

Recent Cust Recognition – Harness Business

M&M Auto Division Best Vendor award in “Electrical & Electronics” commodity category FY 14

M&M FES Best Vendor award in “Electrical & Electronics” commodity category FY 13

Slide 34

Recent Cust Recognition – Harness Business

M&M felicitation for achieving ‘Mentoring Zone’ status in Supplier Business Capability

Bajaj Auto: Gold Awardfor “0” PPM for 3

years in a row

Bajaj Auto: TPM Award

Slide 35

Recent Cust Recognition – Plastics Business

• Maruti Suzuki Award for “Best Design, Development & Localization Effort” for 2013-14

− Product: Cup Holders for Swift, Swift Dezire & Ertiga platforms

Slide 36






Slide 37

• ~ 300 employees• 11,500 m² plant and office• 44 injection molding machines

Quality Certifications• TS 16949 (QMS)

• ISO 14001 (EMS)

• ISO 50001 (Energy Mgt System)

1949 Start of business as “VEB Presswerk Ottendorf-Okrilla”

2007 Acquisition by SPARK Minda Group, India

2009New company name: Minda KTSN Plastic Solutions GmbH & Co. KG

MINDA KTSNMILESTONES:

Slide 38

MKTSN Plastics and Tooling Solutions, Bydgoszcz, Poland

MKTSN Plastics Solutions, Pirna, Germany

• Management and Marketing

• Design Development

• Project Management

• Injection moulding and High end assembly

• Plant Management, Marketing

• Tool development and Tool production

• Injection moulding and simple assembly

Structure Of Minda KTSN In Europe

Slide 39

Minda KTSN - Customers

http://www.volkswagen.de/vwcms/master_public/virtualmaster/de3.html

Slide 40






Slide 41

•44 Injection Machines – Clamping force: 50T to 2000T – Shot weight 10 g to 10 kg– Multi-component injection molding in the

range of 50T to 250T– Gas-Injection Technology

•Transfer-Technology Central Dryer- and Transportation Unit

Central-Unit for pulsed Tool Tempering Tandem tool Hall No. 1 – Injection Molding large Module Parts

Technical Facilities @ Minda KTSN

– Central Unit for material drying and transportation– Central Unit for pulsed tool tempering

Slide 42

• In-House Measurement and Testing Facility– CMM (Coordinate Measuring Machine)

– Laser measuring machine

– Environment Chambers

– Routine measurement and testing equipment for serial controlling

• In-house tool shop (Design & Maintenance)

• Assembly units (fully automated)

• Centrally controlled online machine information system (actual status)

Technical Facilities @ Minda KTSN

Slide 43

• Individual customer solutions by strategic market analysis and benchmarking

• Development according to customer specifications• In house Designing and testing • Tool development coordination (incl. Complex Tool Concepts and Mold-

Flow)

- Team building- Concept phase- Design and layout

- Simulation- Prototyping- Zero series

- Series production- Optimization- Modification

Engineering & Project Management

A. 19 member PM, Design, Tooling, Quality Pre-Planning and Process Engineering team at MKTSN

B. Extensive usage of Catia V5 / Mold Flow

Engineering and Development Process

Slide 44

1. Interior Modules with Kinematics• Air Vents / Louvers / Venting

System• Glove Box And Locking

Mechanism• Cup Holders (Front & Rear)• Ash Trays (For Center Console &

Doors)• Fuel Lid Opener

2. Interior Modules without Kinematics• Steering Column Shroud• Cockpit Covers; Backrest Covers• Speaker Covers• Trunk Covers, Window Frame• Storage Compartments

Core Competencies

3. Crash relevant structural and strengthening parts

4. Parts for engine compartment• Oil Sump• Cylinder Head Cover

Slide 45

Thank You !

Visit us at www.minda.co.in

http://www.minda.co.in/

Documents

1 May 2015. Group Overview Spark Minda, Ashok Minda Group is a leading Automotive Component Group. Founded in 1958 by Late Shri S.L. Minda. With