Upload
patricia-fletcher
View
215
Download
1
Tags:
Embed Size (px)
Citation preview
1
MSE 110WMSE 110WWIRELESS SAFETY EDGEWIRELESS SAFETY EDGE
2WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
3
The new wireless safety edge MSE 110W has been designed to comply every aspect, in terms of safety, of the Europeans Norms currently in charge .
Allows you to make installations in compliance with: EN 12445EN 12453
It is classified as safety device category 2 according to EN 12978
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
4
The MSE 110 W in not only a sensing device for the leaf edge, in fact integrates also an infrared
photocell transmitter, that coupled with the receiver on the pillar, gives you an additional protection on
the gate transit area (Device C+D EN 12453)
All photocells TX or RX present inside the MSE110W are powered by batteries (lithium type AA, minimum life 2 years) The MSE110W doesn't’ require ANY
WIRING.It definitely solves all wiring problems related with
moving leaves.
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
5
TXTX
TXTX
TXTXRXRX
RXRXRXRX
How it worksHow it works
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
6
Central elementCentral element
Incorporates 2 receivers, 1
infrared transmitter and lithium batteries.
RX and TX circuitRX and TX circuit
Batteries are easy accessible removing the screws of the
cover.
CoverCover
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
7
Terminals Terminals elementselements
At both MSE110W terminals you find batteries powered infrared transmitters.
Per sostituire le batterie è sufficiente rimuovere il tappo, sfilare il gruppo TX e togliere il coperchio fissato con due viti
Cover and closing screws
OR Gasket
Photocell lensPhotocell lens
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
8
Fixed Receiver
Can be:Can be:
•Mounted on the wall/pillarMounted on the wall/pillar
•Mounted on a “Safebeam” Mounted on a “Safebeam” columncolumn
•Incorporated inside a counter-Incorporated inside a counter-rubber edge which receives the rubber edge which receives the MSE110WMSE110W
•Mounted on a wall-support which Mounted on a wall-support which permits angle adjustment. permits angle adjustment.
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
9
Fixed Receiver mounted on a safebeam column
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
10
Fixed Receiver mounted on a counter-rubber edge
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
11
Fixed Receiver mounted on adjustable wall support
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
12
A
B
C
D
Fixed receiver applications – top views
• Wall/Pillar
• Counter-rubber edge
• Safebeam column
• Wall adjustable support
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
13
The fixed receiver is the only element which require wiring
It has front LEDs that allow you to monitor the status of the MSE 110 W, without accessing the control board.
Battery charge is also displayed.
Fixed Receiver
WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W
14
Open-Stop-Close key Open-Stop-Close key protected industrial protected industrial push-buttonpush-button
XB300XB300
Availability: January Availability: January 20072007
15
Control board housing Control board housing with integrated key with integrated key protected Open-Stop-protected Open-Stop-Close push-button and Close push-button and main switch main switch disconnectordisconnector
XB541XB541
Availability: January Availability: January 20072007