1
NEODUR BRS 12 0410/85 concrete repair grout INDOORS AND OUTDOORS DESCRIPTION NEODUR BRS 12 is a factory- produced, ready to use repair grout on the basis of cement and high-grade minerals for concrete cosmetics and re-profiling. APPLICATION Indoors and outdoors. NEODUR BRS 12 is used as cement grout for concrete repair, concrete cosmetics and re-profiling of hori- zontal and vertical concrete surfaces, also suitable for overhead works. BRS 12 is also used for fine grouting of large surfaces at damaged (old) and new pre-cast concrete for layer thickness of 10 mm (e. g. broken off edges of stairs, damaged concrete lintels, balcony slabs, garage floors, furthermore as subbase for coating on concrete). PROPERTIES • frost-proof easy to process good bond to concrete can be processed without bonding layer • chloride-free TECHNICAL DATA (at 20° C/65 % relative air humidity) grain size: 0 – 0,3 mm water addition per unit: approx. 3,5 l yield per unit: approx. 15 l processing temperature: >5 ° C tensile strength after 28 days: > 6 N/mm 2 compressive strength after 28 days: > 20 N/mm 2 PROCESSING Clean subbase from loose particles such as dust, cement-slurry, oil and grease. Then thorough pre- wetting, avoiding formation of puddles. NEODUR BRS 12 to be mixed with approx. 3,6 l water as complete unit with a slowly running stirrer for at least 3 minutes. The contact surface can be pre-flushed with a slurry of NEODUR BRS 12 repair mortar (depending on the application thickness). The mortar is applied fresh-in-fresh. After initial hardening of the grout the surface can be treated with slightly moist felt or open-pore sponge and/or smoothed by using plasterer’s float. AFTER-TREATMENT After-treatment of the applied mortar surface acc. to DIN 1045 (e.g. by covering with foil to avoid too rapid drying out). PRODUCTION KORODUR Westphal Hartbeton GmbH & Co. KG, works Wattenscheid Certification: DIN EN ISO 9001:2008 PACKAGING/SUPPLY 25 kg special paper packaging STORAGE Dry, like cement. Shelf-life approx. 6 months. HINTS This product contains cement and has an alkaline reaction with moisture/water. Therefore protect hands and eyes. In case of contact with eyes consult a doctor. Our recommendations for application techniques are based on our experiences. It is recommended to adapt processing and material quantities to the given local conditions and we refer in this context to our general terms of sale and delivery. Further literature, processing hints, tender texts and test certificates on the different KORODUR industrial flooring systems, KORODUR floor hardeners, KORODUR dry mortars and special products are available on request. per April 2010 ® Zentrale: Wernher-von-Braun-Str. 4 92224 Amberg P.O. Box 1653 • 92206 Amberg Phone: +49 (0) 96 21 / 47 59-0 Telefax: +49 (0) 96 21 / 3 23 41 [email protected] Bochum-Wattenscheid works: Hohensteinstr. 19 44866 Bochum P.O. Box 60 02 48 • 44842 Bochum Phone: +49 (0) 23 27 / 94 57-0 Telefax: +49 (0) 23 27 / 32 10 84 [email protected] KORODUR International GmbH www.korodur.de

100179 Neodur BRS 12

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 100179 Neodur BRS 12

100179 Neodur BRS 12.fh11 22.04.2010 8:50 Uhr Seite 2

Probedruck

NEODUR BRS 12

04

10

/85

concrete repair groutINDOORS AND OUTDOORS

DESCRIPTIONNEODUR BRS 12 is a factory-produced, ready to use repair grouton the basis of cement and high-grademinerals for concrete cosmeticsand re-profiling.

APPLICATIONIndoors and outdoors.NEODUR BRS 12 is used as cementgrout for concrete repair, concretecosmetics and re-profiling of hori-zontal and vertical concretesurfaces, also suitable for overheadworks. BRS 12 is also used for finegrouting of large surfaces at damaged(old) and new pre-cast concretefor layer thickness of 10 mm(e. g. broken off edges of stairs,damaged concrete lintels, balconyslabs, garage floors, furthermoreas subbase for coating on concrete).

PROPERTIES• frost-proof• easy to process• good bond to concrete• can be processed without bonding layer• chloride-free

TECHNICAL DATA(at 20° C/65 % relative air humidity)grain size: 0 – 0,3 mmwater addition per unit:

approx. 3,5 lyield per unit: approx. 15 lprocessing temperature: >5 ° Ctensile strength after 28 days:

> 6 N/mm2

compressive strength after 28 days:> 20 N/mm2

PROCESSINGClean subbase from loose particlessuch as dust, cement-slurry,oil and grease. Then thorough pre-wetting, avoiding formation of puddles.NEODUR BRS 12 to be mixed withapprox. 3,6 l water as complete unitwith a slowly running stirrer for at least3 minutes.The contact surface can be pre-flushedwith a slurry of NEODUR BRS 12 repairmortar (depending on the applicationthickness). The mortar is appliedfresh-in-fresh. After initial hardening ofthe grout the surface can be treatedwith slightly moist felt or open-poresponge and/or smoothed by usingplasterer’s float.

AFTER-TREATMENTAfter-treatment of the appliedmortar surface acc. to DIN 1045(e.g. by covering with foil to avoidtoo rapid drying out).

PRODUCTIONKORODUR Westphal HartbetonGmbH & Co. KG, works Wattenscheid

Certification: DIN EN ISO 9001:2008

PACKAGING/SUPPLY25 kg special paper packaging

STORAGEDry, like cement.Shelf-life approx. 6 months.

HINTSThis product contains cement and hasan alkaline reaction with moisture/water.Therefore protect hands and eyes. Incase of contact with eyes consult a doctor.Our recommendations for applicationtechniques are based on our experiences.It is recommended to adapt processingand material quantities to the givenlocal conditions and we refer in this contextto our general terms of sale and delivery.Further literature, processing hints, tendertexts and test certificates on the differentKORODUR industrial flooring systems,KORODUR floor hardeners, KORODUR drymortars and special products are availableon request.

per April 2010

®Zentrale:Wernher-von-Braun-Str. 492224 AmbergP.O. Box 1653 • 92206 AmbergPhone: +49 (0) 96 21 / 47 59-0Telefax: +49 (0) 96 21 / 3 23 [email protected]

Bochum-Wattenscheid works:Hohensteinstr. 1944866 BochumP.O. Box 60 02 48 • 44842 BochumPhone: +49 (0) 23 27 / 94 57-0Telefax: +49 (0) 23 27 / 32 10 [email protected]

KORODUR International GmbH www.korodur.de