Upload
senthil-nathan-s
View
51
Download
0
Embed Size (px)
DESCRIPTION
10.Design of Remote Data Acquisition System of Passenger Flow Based on GSM
Citation preview
Design of Remote Data Acquisition System of Passenger Flow Based
on GSM /GPRS
AIM:
The Project aim to achieve the passenger flow data in a timely and accurate transmission
with data acquisition of passenger flow based on GPRS by infrared transducers.
PURPOSE:
The purpose of the project is to provide a reliable basis for real-time scheduling in public
transportation.
METHODOLOGY:
BLOCK DIAGRAM
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
1
Micro controller
Power supply
IR SENSOR GSM
DATA BASE
POWER SUPPLY:
DESCRIPTION:
With the rapid development of society and economy, urban population, public transport
routes and vehicles have been dramatic increasing. Public Transport as a basic transport in urban
is becoming more and more popular. How to make people travel easily? How to make transport
companies schedule effectively with limited resource, meanwhile achieves a win-win both
making public members travel conveniently and company interest grow quickly? This is a
generally problem which every bus company and public members concern about. According to
the data of people collected and past experience of the passenger traffic to make the vehicle
scheduling, obviously it cannot meet this Real-time, fast and accurate scheduling requirements.
With the mature application of GSM/GPRS technology, embedded systems technology and
network communication technology, taking advantage of GSM/GPRS real-time online
communication, average low-cost, remote transmission and network coverage wildly to transmit
passenger flow date on time, then accurately transmit to the terminal processing center.
In this project, unit of acquisition data of passenger flow used two ways to capture, such
as infrared tubes and pressure sensors. Data of passenger flow connected the master by A/D
interface. The function of the unit of GSM/GPRS transmission is receiving and transmitting on
data of passenger flow, auto communication etc.,
GSM/GPRS remote data transmission with always-on, switch freely, flexible billing
methods and high transfer rate, the passenger flow data will be collected through the GPRS
network connected to the Internet, it provides a transparent transmission channels between
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
2
Step DownTransformer
BridgeRectifier
FilterCircuit
Regulator section
collecting equipment and terminals in the remote processing centers. This achieves the passenger
flow data in a timely and accurate transmission.
SOFTWARES:
1. Embedded C
2. Keil IDE
3. Uc-Flash or ISP
4. Express PCB
HARDWARES:
1. Micro Controller
2. Power Supply
3. Sensors
4. GSM/GPRS
RESULT:
By this Project the passenger flow data by infrared transducers in a timely and accurate
transmission with data acquisition of passenger flow based on GSM/GPRS is done.
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
3