Upload
buihanh
View
225
Download
0
Embed Size (px)
Citation preview
201 Northfield Road | Northfield, IL 60093 U.S.A. | Tel: 773.478.3515 | Fax: 773.478.3232 | www.bodine-electric.com | [email protected]
Bodine Electric offers a range of 12 Volt permanent magnet DC (PMDC)
gearmotors and motors, up to 1/8 Hp. They are available with a variety
of gearboxes, providing wide speed range. Torque ratings are up to
310 lb-ins. When paired with Bodine’s WPM—12 VDC speed control,
they provide a complete, single-source motion control system.
24A PErMAnEnT MAgnET DC MoTorHorsepower: 1/50 to 1/7 HPRated Torque: 8 to 24 oz-in.Speed Range: up to 2,500 RPM
33A PErMAnEnT MAgnET DC MoTorHorsepower: up to 1/8 HPRated Torque: up to 50 oz-in.Speed Range: up to 2500 RPM
24A-D AnD 24A-Z PArAllEl sHAfT gEArMoTorHorsepower: 1/29 to 1/17 HPRated Torque: 3.3 to 100 lb-in.Speed Range: 5.6 to 417 RPM
33A-W AnD 33A-E/f PArAllEl sHAfT gEArMoTorHorsepower: up to 1/8 HPRated Torque: 6 to 360 lb-in.Speed Range: 8 to 660 RPM
24A-3f/H HolloW sHAfT rigHT AnglE gEArMoTorHorsepower: 1/17 HPRated Torque: 5 to 22 lb-in.Speed: 42 to 500 RPMSolid shaft versions also available
33A-5f, 33A-5n AnD 33A-gB rigHT AnglE gEArMoTorHorsepower: up to 1/8 HPRated Torque: 11 to 308 lb-in.Speed: 9 to 500 RPMHollow shaft versions also available
• High starting torque, adjustable speed, and predictable
performance under a range of operating conditions
• Unvented gearhousings lubricated for life
• Available for OEM applications: lead-times and minimum
quantities apply
12 VDC Permanent Magnet DC gearmotors and Motors
Typical Applications: Bodine 12 VDC gearmotors and motors are ideal for battery or solar powered applications, such as automatic door openers in remote locations, solar powered pumps, boat lifts and pool equipment.
07481088 Rev.B
201 Northfield Road | Northfield, IL 60093 U.S.A. | Tel: 773.478.3515 | Fax: 773.478.3232 | www.bodine-electric.com | [email protected]
.94±.03
.79 MIN.FULL DEPTH
.292±.005 FLAT
.125±.005
Ø2.42MAX.
3.87 MAX
24.0" +2.0"/-1.0"
Ø.3120.3115
Ø.999.995
3.50±.01
2.41±.01 SQ.
(.96)
(4) .181±.005 WIDEX .2445±.0125 LONGSLOTS 90° APARTON 2.7648±.0071 B.C.
.0937/.0917 SQ. X 1.25" KEY
1.28±.07
24.0" +2.0"/-1.0"
1.38 MIN.FULL DEPTH
1.59±.03
.347±.005 FLAT
.090±.0155.180 MAX
3.39 MAX.
(4) 10-32 UNF-2B.25 DEEP MAX.90°±.5° APART ON2.750±.010 B.C.
3.75±.012.0001.997
1.66 REF.
4.10 REF.
.3750
.3745
.1875/.1855 SQ. X 1.12" KEY
ø1.536±.016NOT MACH.
4.640±.005 SQ.
Ø .7500.7495
3.625±.0101.8125 REF.
(4) 1/4-28 UNF-2B.50 DEEP MAX.
3.625±.010
.9125 REF.
24.0" +2.0"/-1.0"
ø3.39 MAX.
.370±.0152.00±.03
[9.114 MAX]
1.50±.03
3.568±.051
4.96REF.
1.784 REF.
Ø.593±.005FLAT
1.23 MIN.FULL DEPTH
1.659 REF.3.810±.0523.250±.042
.1875/.1855 SQ. X 1.12" KEY
Ø.6250.6245
1.670±.005
1.79 MAX.1.50 REF.
3.00±.013.56±.01
(4) Ø0.271/Ø0.266 HOLES
Ø3.39 MAX.
9.741 MAX
.0937/.0917 SQ. X 1.25" KEY
1.28±.07 24.0" +2.0"/-1.0"
.92±.02
3.42 SQ. MAX.
2.652±.010
(1.326)
(.582)
2.652±.010
[4] 10-32 UNF-2B.38 DEEP MAX.
Ø1.125±.008NOT MACH.
Ø.5000.4995
.554±.005
1.56±.036.637 MAX
.45±.01FLATØ2.42 MAX.
24.0" +2.0"/-1.0"
24.0" +2.0"/-1.0"1.305±.020
7.4418 MAX
3.085±.020
1.000 REF.
1.61 MAX.
.560/.570
.127.125 K.W.
EQUALLY SPACED ON.35 MIN FULL DEPTH
ON 2120/2.130 B.C.D.
[3] 10-32 UNF-2B
[BOTH SIDES]
30°
‚Ø 2.42 MAX.
2.475O.D. REF.
1.188 ±.005
3.50±.01
2.000±.005
2.56±.01
.29 REF.
2.3630REF.
3.57REF.
[4] 1/4-20 UNC-2B.50 DEEP MAX.
.501
.503Ø
.949 REF.
.63±.05
.2497
.2494
“F”
12 Volt PMDC gearmotor and Motor Dimensions (standard configurations shown)Type 24 A Motor
Type 24 A -D Parallel Shaft Gearmotor
Type 24 A -3F/H Hollow Shaft Right Angle Gearmotor
Type 33A Motor
Type 33A-E/F Parallel Shaft Gearmotor
Type 33A-5N/-5R Right Angle Gearmotor
Bodine offers system-matched 12VDC controlsfor more information, and to find your Bodine regional sales Manager, visit www.bodine-electric.com
Ideal for battery or solar powered applications that require basic single- direction, speed control. The WPM filtered control provides high torque and lower operating temperatures. It features pulse width modulation (PWM) circuitry for precise speed control. DIP switches allow the control to be easily calibrated for different size motors. Con-trols are available with ¼” quick connect tabs.
© Copyright 2012. All rights reserved. 07481088 Rev.B