Keeping your world up and running.

Test Tools CatalogVolume 40, 2010

Your authorized Fluke distributor

Fluke 28 II Dustproof/Waterproof Digital MultimeterThe new standard for rugged.

• New IP67 ingress protection rating impervi-ous to the wettest weather, dirt or dust.

• Designed to withstand 3 meter drop.

• Measure up to 1000 V ac and dc.

• Measure up to 10 A (20 A for 30 seconds).

• 10,000 μF capacitance range.

• Frequency to 200 kHz.

• Built in thermometer.

• Resistance, continuity and diode test.

For more information, see page 7.

Fluke 233 Remote Display Digital MultimeterAllows you to be in two places at once!

• Removable display gives the user ultimate flexibility.

• Place the display where you can see it and then put the meter where it is convenient for you.

• Makes taking measurements in hard-to-reach places easy.

• Use in user prohibited areas such as clean rooms or hazardous areas.

For more information, see page 7.

Fluke Ti32 Thermal ImagerSuperior image quality, easy to use, rugged and reliable. Everything you expect from Fluke, plus:

• 320 x 240 detector resolution.

• Temperature measurement range: -20 °C to +600 °C (-4 °F to 1112 °F).

• IR-Fusion enabled.

• SmartView software.

• Field replaceable batteries, two included.

• Optional swappable telephoto and wide-angle lenses available.

• Drop tested to 6.5 ft and meets or exceeds an IP 54 rating.

For more information, see page 43.

U.S.A.

Madein the

U.S.A.

Madein the

U.S.A.

Madein the

Fluke.Keeping your world up and running.®

Fluke CorporationPO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.PO Box 1186, 5602 BD Eindhoven, The Netherlands

For more information call:In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866

From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com

©2003-2009 Fluke Corporation. Specifications subject to change with-out notice. Microsoft is a registered trademark of Microsoft Corporation. Printed in U.S.A. 11/2009 1274458R C-US-N Volume 40

Modification of this document is not permitted without written permission from Fluke Corporation.

Fluke 773 Milliamp Process Clamp MeterMeasure, test, and troubleshoot 4-20 mA control signals without breaking the mA loop or disrupting process control.

• Dual display of both mA and 0 to 100 % of 4-20 mA span.

• Simultaneous mA in-circuit measurement with 24 V loop power.

• Source dc voltage to test input devices that accept a 1-5 V or 0-10 V signals.

• Detachable clamp with extension cable.

• Best in class 0.2 % accuracy.

• Resolution and sensitivity to 0.01 mA.

For more information see page 29.

What’s new from Fluke