print (PMS638C)size: 151 x 196mm

1500WROTARY HAMMER

BT-RH 1500

QUICK START GUIDEEasy steps to getting started.

1. Ensure all items, including your manual are removed from the packaging before discarding.

2. Ensure the side handle (6) is secured to the hammer drill by a clamp. Turning the handle anti-clockwise (looking from the handle) will release the clamp. Turning the handle clockwise will tighten the clamp.

3. Adjust the depth stop (7) to the appropriate drilling depth.

4. Insert the drill bit into the the chuck by pulling back and holding the locking sleeve (2).

5. Place the dust cap over the drill and push it towards the drill chuck before carrying out any hammer drilling vertically above your head .

6. Select mode of rotation (i.e. hammer drilling or chiselling) by adjusting the rotary switch (3).

7. Connect the power supply.

8. IF YOU ARE IN ANY DOUBT PLEASE REFER TO THE DETAILED INSTRUCTIONS WITHIN OUR MANUAL.

2 3

7

6