Upload
amazonfed
View
28
Download
1
Embed Size (px)
DESCRIPTION
Bondor Panel Tech Data A4 Flyer
Citation preview
EPS
PAN
ELS
>
PIR
PAN
ELS
>
MIN
ERAL
FIB
RE P
ANEL
S >
B
ON
DO
R >
EP
S PA
NEL
S >
PI
R PA
NEL
S >
M
INER
AL F
IBRE
PAN
ELS
>
BO
ND
OR
>
EPS
PAN
ELS
>
PIR
PAN
ELS
>
MIN
ERAL
FIB
BondorPanel® Technical Data
Product DescriptionBondorPanel® is a lightweight, non ozone-depleting structural panel made with an insulating EPS core and strong COLORBOND® facings; it comes in a range of skin thickness and EPS core types with 0.6/0.6 and SL grade as standard.
Core SL, M, H, VH grade EPS (with fire retardant additive).
Steel Thickness 0.6, 0.5 and 0.4mm
Surface Profile Rib, Plain or Satinline
Panel Facings External/Internal 0.6mm CRP grade COLORBOND® pre-painted galvanized steel, off white 25% gloss as standard.
Colour Standard: Permagard® White. Other colours available: Contact Bondor.
Length Supplied to suit application. Limited by handling, transport and design considerations
Width 1200mm
Thickness 50mm – 250mm
SPAN TABLE – NON-CYCLONIC REGION A&B (WALL APPLICATIONS ONLY)SL Grade EPS Core / 0.6mm Steel SkinsMaximum uniformly distributed ULS design wind load (kPa) for the given span:
Span (mm)
Multi-span, wind pressure acting inwards/outwards
50 75 100 125 150 200 250
1500 2.72 4.07 5.43 6.79 8.15 9.92 9.92
1800 2.26 3.39 4.53 5.66 6.79 8.27 8.27
2700 1.51 2.26 3.02 3.77 4.53 5.51 5.51
3600 1.13 1.70 2.26 2.83 3.39 4.13 4.13
4500 0.79 1.18 1.57 1.97 2.36 3.15 3.31
5400 0.55 0.82 1.09 1.37 1.64 2.18 2.73
6300 0.40 0.60 0.80 1.00 1.20 1.60 2.01
7200 0.31 0.46 0.61 0.77 0.92 1.23 1.54
8100 0.24 0.36 0.49 0.61 0.73 0.97 1.21
9000 0.20 0.29 0.39 0.49 0.59 0.79 0.98
9900 0.16 0.24 0.32 0.41 0.49 0.65 0.81
NOTES: 1. Pressures specified are for wind gusts only per AS1170.2. Deflection limit of span/150 applies, and in accordance with
Serviceability Limit State criteria per AS1170.0 – TABLE C1.
Josef Chromy Wines, Launceston, TAS
SPAN TABLES – INTERNAL COLD STORAGE ROOMS
Thickness (mm) 50 75 100 125 150 200 250
Panel Spans (0.6mm)
Walls (mm) (supporting ceilings & doors) 3600 4800 5600 6200 6800 7900 8800
Walls (mm) (not supporting ceilings) 4400 5500 6400 7100 7700 9000 10000
Ceilings (mm) 3600 4500 5200 5700 5900 6700 7500
NOTES:1. Panel thicknesses of not less than 75mm are recommended
for chillers and not less than 150mm are recommended for freezers, depending on structural considerations.
2. The above table applies for cold storage rooms constructed wholly within a larger enclosed building. Pressure relief porting is to be provided for a freezer in accordance with Bondor® recommendations.
3. Fixing with 14g tek screws (x4 off) per fixing point or mushroom head bolts (x1 off at end support and x2 off at intermediate supports) minimum are required.
3. Fixing with 14g tek screws (x4 off) or mushroom head bolts (x2 off) minimum per fixing point are required.
4. Extended span tables including cyclonic regions C&D, single span and 300mm thick panel are also available. Refer Bondor.
ISSUE DATE: 19/10/11
BONDOR® NATIONAL NETWORK BRISBANE /EXPORT 111 Ingram Road Acacia Ridge QLD 4110 T: 07 3323 8500 F: 07 3323 8501
PERTH 17 Gauge Circuit Canning Vale WA 6155 T: 08 9256 0600 F: 08 9256 0620
ADELAIDE 70 – 72 Rundle Road Salisbury South SA 5106 T: 08 8282 5000 F: 08 8282 5099
MELBOURNE 329A St Albans Road Sunshine VIC 3020 T: 03 8326 8000 F: 03 8326 8099
LAUNCESTON 7 Connector Park Drive Kings Meadows TAS 7249 T: 03 6335 8500 F: 03 6335 8544
SYDNEY 49 – 53 Newton Road Wetherill Park NSW 2164 T: 02 9609 0888 F: 02 9729 1114
To connect to your nearest Bondor® branch simply call 1300 300 099 www.bondor.com.au
Metecno Pty Limited trading as Bondor® – ABN 44 096 402 934 Bondor®, Metecno®, BondorPanel®, MetecnoPanel®, MetecnoSpan®, Equideck®, Equitilt®, Flameguard®, Purline®, Solarspan® are registered trademarks of Metecno Pty Limited.
COLORBOND® and Permaguard™ are registered trademarks of BlueScope Steel Limited. Microban® is a registered trade mark of the Microban Products Company. Specifications subject to change without notice. Refer to Bondor® Website for latest version. Consult Bondor® for your application.
EPS
PAN
ELS
>
PIR
PAN
ELS
>
MIN
ERAL
FIB
RE P
ANEL
S >
B
ON
DO
R >
EP
S PA
NEL
S >
PI
R PA
NEL
S >
M
INER
AL F
IBRE
PAN
ELS
National Foods, Campbellfield, VIC
Breakwater, NSW
Fire Hazard Properties
AS 1530.3 Indices
Ignitability Index 0
Spread of Flame Index 0
Heat Evolved Index 0
Smoke Index 2–3
AS/ISO 9705 - BCA Group Number (Spec C1.10a)
150mm or thinner with aluminum fixings Group 2
250mm or thinner with steel fixings Group 2
250mm or thinner with steel fixings & steel rivets at 1200mm in ceiling Group 1
Acoustic Properties
Rw value for BondorPanel® is 24 to 25. Refer to Bondor® for your specific application.
Panel Properties
Thickness (mm) 50 75 100 125 150 200 250
Mass Kg/m² 11.3 11.6 12.0 12.3 12.7 13.3 14.0
Thermal Performance (Properties at 6oC)
‘U’ Value (W/m²K) 0.76 0.51 0.38 0.30 0.25 0.19 0.15
‘R’ Value (m²K/W) 1.32 1.92 2.63 3.29 3.95 5.26 6.58
ISSUE DATE: 19/10/11