Upload
circleline
View
220
Download
0
Embed Size (px)
Citation preview
7/28/2019 2011 SH + New Pdts
1/38
7/28/2019 2011 SH + New Pdts
2/38
7/28/2019 2011 SH + New Pdts
3/381 Toll Free : 800.989.5244 www.stronghandtools.com1 Toll Free : 800.989.5244 www.stronghandtools.com
Multi-Angle Magnets
Part No. Dimension Angles Max. Pull Force Weight
MS3503.86 x 2.95 x 0.63
98 x 75 x 16mm45 x 60 x 90
30 LBS
13.6kg
0.75 LB
0.34kg
MS350A3.86 x 2.95 x 0.63
98 x 75 x 16mm45 x 60 x 90
30 LBS
13.6kg
0.66 LB
0.3kg
Use these Multi-Angle Magnets for fast, simple set-ups at: 30, 45, 60, 90. Choose
from the Standard Magnet, or the XYZ Magnet with 3-Axis Magnetic Plate.
We recommend keeping both types on hand for faster, more accurate set-ups in 2-axis
and 3-axis applications.
Model MS350 shown
Model MS350A shown
MagTab DUOLow Prole holding at TWO POINTS on at, angled, square, or round vertical surfaces!
Adjustable Magnetic Base instantly adjusts and holds onto round, at and angled metal
surfaces.
2-Sided holding Join cross bar Hold Tabs
No clamping edges required! Clamp anywhere on at, round or angled
surfaces!
Position and hold pipes, tubes or plates at two points, on ONE side of
your workpiece, leaving ample space on the other side for welding.
Hold handles
The 3-Axis Magnetic Plate features two rare
earth disc magnets for 3rd axis holding.
Turn the Magnetic
Face Plate with your
nger to desired
position to hold stock.
Quickly snap together 2 or 3
-axis set-ups for tack welding.
Part No. Description Each DimensionPull Force
(ea.)
Total
Weight
MFT12Symmetric MagTabs
Twin Pack
4x 3 x 1-1/4
100 x 76 x 32mm
18 LBS
8kg
1 LB
0.45kg
Front:
Back:
Multi-Angle
New Products of 2012
I
7/28/2019 2011 SH + New Pdts
4/38Toll Free : 800.989.5244 www.stronghandtools.com
Gusset Magnet
Part No. Dimension Arm Length Magnets Weight
MGH204.5 x 4.5
114 x 114 mm
2.2
56mm7pc
0.6 LB
0.27kg
Part No. DimensionMax. Pull
ForceWeight
MXE133 posts per
set
16 LBS
7kg
0.2 LB
0.1kg
Unique! Developed by Customer Demand for quick parallel plane alignment, locating, andclamping of Gussets, Base Plates, and Panels.
This low-prole Gusset Magnet provides the unique function of holding stock securely at 3 points directly on the surface
area of Gussets, Base Plates, and Panels for locating and clamping, while leaving ample space for tack welding.
Four rare earth disc magnets set in the magnet face hold the Gusset Magnet against your frame or substructure with direct,
even clamping pressure for a fast, accurate and convenient setup. Three Adjustable 1-1/2 Magnetic Hex Bolts protrude
from the magnet face and can be pre-set to the correct depth to securely position the gusset panel in a precise location for
tack welding.
Three positioning pins in the magnet face act as a guide for the quick alignment and positioning of the Gusset Magnet
against the substructure. Equipped with a total of 7 magnets, the Gusset Magnet is easy to handle, place, and remove.
The Gusset Magnet comes with a pair of attachable arms that swing out from the magnet body to hold stock at any point,
and any angle.
3 x Magnetic Hex Bolts
Magnets
MXE13Holding a 3-Axis
workpiece.
Magnetic Posts installed on Adjust-O
Magnet Squares (Sold separately).
3rd-Axis Magnetic Posts for Adjust-O Magnet Squares
Reference
Quickly and easily set-up 3-Axis workpieces.
Use on either side of the magnet squares.
Fits all MSA Adjust-O Magnet Squares.
Attachable / Detachable Arms
swing out to hold stock at two
points at any angle.
Pre-set 1-1/2
(38mm) Magnetic
Hex Bolts to
required depth for
panel positioning.
New Products of 2012
7/28/2019 2011 SH + New Pdts
5/383 Toll Free : 800.989.5244 www.stronghandtools.com
New Products of 2012
Panel ClampsMagnets hold clamp parts and panels together!
Magnets in the Keeper Plate and the clamp body hold your panels in
position for a speedier, and more efcient setup. NO MORE fumbling
while trying to hold the panels and the clamps!
Turn the spring-loaded screw to adjust the opening to accept panels of
different thicknesses [Max. 0.2 (5mm)].
Wider-than-standard clamp body holds your panels atter, for a more
precise setup. Panels will not spin out of alignment.
A magnet in the Keeper Plate holds your panels together even when used
in the vertical position.
Consider our Sheet Metal Magnet (Part No. MCB82) for top-side
alignment of panels.
The BETTER WAY to
align & hold panels for
butt welding.
Total: 3 Magnets
Spring Loaded
Magnetic
Keeper PlateWeight: 0.24 LB ( 0.1kg)
Sheet Metal MagnetsHold sheet metal and automotive metal panels rmly in a positive location for cutting,
welding, tacking, painting and repair operations.
Rare earth disc magnets in the magnetic plate have superior gripping power.Use horizontallyor vertically. The strong, generously sized plastic handle makes placing, moving, and
removing the Sheet Metal Magnets fast and easy.
3-1/4
(83mm) Dia.
ReplaceableRubber Pad
Part No. Description Weight Max. Magnetic Pull
MCB82 Sheet Metal Magnets (Twin Pack) 1.2 LBS
0.54kg
100 LBS ( 45kg )
(Based on 0.07/ 2 mm steel plates.)
MCB802 Replaceable Rubber Pad x 10 pcs. -- --
MCB84 2 pcs. Sheet Metal Magnets, 1 pc. Mountable /
Magnetic Wall Caddy, 3 pcs. Plastic Hold Down Straps.
2 LBS
0.9kg
--
Ideal for positioning
and holding sheet
metal for butt
welding.
P/N: MCB84
P/N: MPC12
Twin Pack
V
7/28/2019 2011 SH + New Pdts
6/38Toll Free : 800.989.5244 www.stronghandtools.com
New Products of 2012
Large V PadTurn the Heavy Duty P Rail Utility Clamps into a pipe clamp
with this large V-Pad accessory.
[P Rail size Utility Clamps 1-9/16 x 3/4 (39.6 x 19mm),
clamping pressure 4,800 LBS (2,177kg) ]
Part No. Dimension Weight Tapped Hole For Clamps
XPV4.75 x 1.5
120.7 x 38.1mm
0.86 LB
0.39kg3/8 - 16 UP Series
Magnetic Nut & Bolt Holders
Hold Nuts and Bolts in place before tightening.
MNB50 5 piece Set includes:3 MagneticPins
1pc. Magnetic Wrench
Attachment 4 pcs Magnetic Rings
Slide Magnetic Ring on Hex Wrench Tip to steady,
pickup, and hold nuts and bolts in place while you work.
Clip Magnetic Wrench Attachment on any size wrench tohold nuts and bolts in place before tightening.
No more fumbling while trying to hold small parts!
Ideal when working in tight spaces and hard to reach
areas!
Total Weight: 0.08 LB ( 0.04kg )
V-Pad shown mounted on
P Rail U-Clamp
Hex Size: 3/16, 1/4, 5/16, 3/8
(5mm, 6mm, 8mm, 10mm)
P/N: XPV
7/28/2019 2011 SH + New Pdts
7/385 Toll Free : 800.989.5244 www.stronghandtools.com
New Products of 2012
VI
MIG / TIG Gun HoldersHandy Accessory Plate (included with Part
Nos. MRM12, MRM13) features a slot for
MIG Pliers and a Nozzle Gel Canister.
Fully enclosed Magnetic Base allows
easier clean up of metal fuzz.
Part No. MRM13 Kit contains the MIG Gun
Holder (MRM12), and MIG Pliers (PM08).
TIG Gun HolderMIG Gun Holder with
Accessory Plate
MIG Pliers
MRT15MRM12 PM08
Slot to rest
Tig rodAluminum cover on
bottom for easier
cleaning of fuzz.
(Magnetic Base)
Nozzle
Gel Canister
Accessory Plate Magnetic
Base
Slot to
park MIG
Pliers
Part No. Description Dimension Weight
MRM12 MIG Gun Holder w/ AccessoryPlate
3.5 x 6 x 5.389 x 152 x 135mm
2.8 LBS1.27kg
PM08 MIG Pliers8
203mm
0.6 LB
0.27kg
MRM13MIG Gun Holder w/ Accessory
Plate & MIG Pliers--
3.4 LBS
1.54kg
MRT15 TIG Gun Holder3.5 x 6.3
89 x 160mm
1.8 LBS
0.82kg
New Pipe Pliers w/Stainless Steel V-PadsThe convenient way to hold round or square tubes securely for butt-welding.
Features:
Wide opening allows the Pipe
Pliers to hold up to 2-1/2 (64
mm) diameter pipes.
Adjustable top spindle for holding
pipes of varying sizes.
2 large V-Pads provide a better
clamping surface.
0 & 45 angle clip allows angled
clamping. Stainless Steel V-Pad also sold
separately. (See chart below)
Part No. Description OALThroatDepth
Min / Max
DiameterThread Weight
PG635VS Pipe Plier with Stainless Steel V-Pads8-1/2
215mm
3
76mm
1-1/2 - 2-1/2
40 - 64mmM8
1.2 LBS
0.5kg
XFVS Stainless Steel V-Pad Hole Dia.: 3/8-16 (M10)0.3 LB
0.1kg
Stainless Steel V-Pad
( P/N:XFVS )
P/N: PG635VS
7/28/2019 2011 SH + New Pdts
8/38Toll Free : 800.989.5244 www.stronghandtools.com
New Products of 2012
Hand Rest Glide KitUnique and Very Practical! This Hand Rest glides smoothly on cut-to-length angle iron allowing you to steady your wrist.
Reduce hand and shoulder stress and fatigue. Safely keep your hand and arm elevated. Powder coated steel rest plate
swivels 360 on the base for support in a full arc.
Kit includes Hand Rest, and 2 Magnetic Mounting Bases. Total weight: 1.5 LBS (0.68kg).Angle Iron NOT provided.
Hand Rest
(3 Magnets on each base)
Magnetic Mounting Bases 2 pcs
360
376mm
4.3109mm
Mounting Hole
2.563.5mm
Hand Rest Glide Kit Assembly Example:*Angle Iron size 1.5 (38mm)
Cut to length
Cut Angle Iron to
the desired length.
MagBracePosition a single metal piece, or 2-axis stock, at 90 on round,
square, or angled structures before tack welding. The MagBrace
creates a rest for secure holding and positioning of stock. Magnets
on the face of the 1.8 rest provide light duty holding of stock.
Made of machined aluminum die casting. Choose from MagBrace only
(Mount with your own clamp) or MagBrace & Clamp Set.
DB
A
C
H
Part No. Description A (max square) B (max ) C D H Weight
MX50 Brace with 2 magnets3 x 3
76 x 76mm
2.75
70mm
4.5
114mm
1.8
46mm
2.4
61mm
0.66 LB
0.3kg
UBB65MagBrace mounted on
clamp w/Spring-loaded armMagBrace same as above
1.5 LBS
0.7kg
Magnets
Angle iron centered
on square tube.
P/N: MHR10
P/N: UBB65 P/N: MX50
Mount MagBrace with
clamping device.
7/28/2019 2011 SH + New Pdts
9/38
7/28/2019 2011 SH + New Pdts
10/38
7/28/2019 2011 SH + New Pdts
11/38
7/28/2019 2011 SH + New Pdts
12/38
7/28/2019 2011 SH + New Pdts
13/38
7/28/2019 2011 SH + New Pdts
14/38
7/28/2019 2011 SH + New Pdts
15/38
7/28/2019 2011 SH + New Pdts
16/38
7/28/2019 2011 SH + New Pdts
17/38
7/28/2019 2011 SH + New Pdts
18/38
7/28/2019 2011 SH + New Pdts
19/38
7/28/2019 2011 SH + New Pdts
20/38
7/28/2019 2011 SH + New Pdts
21/38
7/28/2019 2011 SH + New Pdts
22/383 Toll Free : 800.989.5244 www.stronghandtools.com
Locking Chain Pliers & Forged Adjusta-Clamps
The flexibility to clamp around odd shaped items!
Holds 6 (150 mm) pipes with the standard 24 chain.
Clamp around odd or awkwardly shaped items.
Hold two workpieces, or a group of materials securely in place
while you weld.
The ONLY Locking Chain Pliers with replaceable chains of
various lengths! Chain lengths from 16 to 48.
Made of heat treated alloy steel for strength and durability.
PC924
Replaceable ChainUnscrew and remove existingchain. Replace with a shorter orlonger chain as needed.
Quick Turn Crank HandleAdjust the opening andtorque with the handle.
Chain RetainerRetains the positionof the chain.
Easy-In Easy-Out FishtailSpecial fishtail chain end foreasy insertion into clamp jaws.
Holds up to
6(150 mm)
pipes
Locking Chain Pliers
Custom length chains available.
Part No. Description OAL Weight
PC924 Standard Chain Pliers 9 1.9 lbs
with 24 (60 cm) chain 230 mm 0.9 kg
PXC16 16 Replaceable Chain 16 0.5 lb40 mm 0.2 kg
PXC36 36 Replaceable Chain 36 1.0 lb91 mm 0.5 kg
PXC48 48 Replaceable Chain 48 1.4 lbs122 mm 0.7 kg
Handi-Hammer - The handle-less Tapper!The Unique Dead-Blow Tapper
One Steel End for hard surfaces.
One Soft Face for non-marring applications.
Eliminates bounce back and increases impact.
Fits easily in Tool Kits, Tool Boxes & Work Bench Drawers.
Ideal for confined areas!
Forged Adjusta-ClampsThe Rugged Forged Steel Pivot Clamp.
Instant height adjustments without blocks or shims. One piece
assembly allows for quick setups.
Removable brass shims protect machine table and workpiece.
Clamp can swing 90 in either direction for loading clearance.
CH-10 1-5/8 x 5 0.6 lb40 mm x 127 0.3kg
CH-14 1-3/4 x 5-1/4 0.9 lb45 mm x 133 0.4kg
Part No. Dimension Weight
NEWNEW
Steel EndFor hard surfaces.
Soft EndFor non-marringapplications.
CH-14
StudPart No. Size Capacity L1 L2 T W Weight
L2L1
T
W
Stud
No spacer needed, ideal for machine centertombstones or other vertical mountings.
Clamp two unevenworkpieces. With riser
blocks the ForgedAdjusta-Clamps can beused for tall jobs.
850740 3/8 1-3/4 1-1/8 1-7/8 1 1-1/4 9 oz44 mm 29 48 25 32 0.3 kg
850750 1/2 2-1/16 1-7/16 2-5/16 1-7/16 1-5/8 17 oz52 mm 37 59 37 41 0.5 kg
850760 5/8 3 2 3-1/4 1-7/8 1-7/8 2.4 lbs76 mm 50 83 48 48 1 kg
Max.
Visit our website at www.valtrainc.com for more information.
7/28/2019 2011 SH + New Pdts
23/38Toll Free : 800.989.5244 www.stronghandtools.com
Table Mount C-Clamps & Expand-O Pliers
The only expanding and spreading pliers in the market.
PE6 6-1/2 500 lbs 5/16-18 1 3/4 0.5 lb PE6M 165 mm 230 kg M8 25 mm 19 mm 0.2 kg
PE10 10 900 lbs 3/8-16 1-3/8 1-3/8 1.8 lbs PE10M 255 mm 410 kg M10 35 mm 35 mm 0.8 kg
PEV6 6-1/2 500 lbs 5/16-18 1 3/4 0.8 lb PEV6M 165 mm 230 kg M8 25 mm 19 mm 0.4 kg
PEV10 10 900 lbs 3/8-16 1-3/8 1-3/8 2.4 lbs PEV10M 255 mm 410 kg M10 35 mm 35 mm 1.1 kg
ClampingPart No. OAL Pressure Thread Min. Stroke Weight
Separate cabinets
Expand brackets
Align to fit holes
Insert panel intoU-channel
Ideal for Metal or Wood working.
Min.
PE10
Optional Pipe Adaptors
Attach 1/2 NPT pipes for wide spreadingjobs. See Accessories page 25.
Unique, Reverse-Action Clamping Pliers!Jaws move in opposite directions to push against two surfaces.
Patent No. US 6,993,999 B2
NEW! Expand-O Pliers with V-Pads
and Extension Rod! (PEV6 & PEV10)
Features:
One Magnetic V-Pad, One Standard V-Pad.
Use the Extension Rod to increase reach
by 1 - 2.
Use the bottom Adjustable Magnetic V-Pad
to set the pliers in place.
When expanding, the two V-pads instantly
adjust to round or flat surfaces.
Extension Rod
V-Pad
Magnetic V-Pad
PE6V
Table Mount Locking C-Clamps
Expand-O Pliers
Mounts directly to any work bench, drill press, etc.
Mounting base hole accepts standard 5/16-18 bolts and uses
push-down action to hold your workpiece securely.
Use the L-Handle for rapid tightening
Rapid lock and release. Ideal for repetitious clamping.
PTT934
B
A
0.39PTT634 : 6PTT934 / PTT956 : 8
1-3/16
Throat Max. MountPart No. Depth (A) Capacity (B) Thread Weight
PTT934 3-3/8 4 5/16-18 1.6 lbs86 mm 102 mm M8 0.7 kg
PTT634PT09
PT11
PT14
5/16-18 0.9 lb76 mm 102 mm M8 0.4 kg
PTT956 6-1/8 4-3/4 5/16-18 2.0 lbs155 mm 120 mm M8 0.9 kg
3 4
7/28/2019 2011 SH + New Pdts
24/385 Toll Free : 800.989.5244 www.stronghandtools.com
Welders Angle Clamps
2 and 3 Axis Fixture Vises
WAC22 Standard screw, Machined on two outside surfaces 2.21 3.54 1.85 1.28 8.8 lbs 56 mm 90 mm 47 mm 33 mm 4.0 kg
WAC34 Standard screw 3.75 4.80 2.45 1.38 11 lbs 95 mm 122 mm 62 mm 35 mm 5.0 kg
WAC35D Quick Acting Screw, Two stand-offs, 3.75 4.80 2.45 1.38 11 lbs Machined on two outside faces 95 mm 122 mm 62 mm 35 mm 5.0 kg
WAC45 Quick Acting Screw, Two stand-offs, 4.75 5.32 3.92 2.25 23 lbs Machined on two outside faces 121 mm 135 mm 100 mm 57 mm 11.0 kg
WAC35-SW 3-Axis Fixture, Quick Acting Screw, Two stand-offs 3.75 4.80 2.45 1.38 24 lbs Swing Away Arm 95 mm 122 mm 62 mm 35 mm 11 kg
WAC45-SW 3-Axis Fixture, Quick Acting Screw, Two stand-offs 4.75 5.32 3.92 2.25 43 lbs Swing Away Arm, Two magnetic rests 121 mm 135 mm 100 mm 57 mm 20 kg
Miter Jaw JawPart No. Features Joints (A) Length (B) T-Clearance Height (D) Weight
2-Axis
3-Axis
* Optional Magnetic Rest supports workpieces. 4 per set. Part No. T55410-K4. 0.5 lb (0.23 kg)
Made with machined cast iron. Featuring these improvements:
Machined outside faces - usable for upright joint
Stand-off increases access
Quick acting screw on deluxe models.
T-Clearance (C)
Miter Joints (A)
JawLength
(B)
Quick Acting Button(WAC35D, 35-SW, 45, 45-SW only)
Holes for
Stand Off
Jaw Height (D)
1 Base height
Stand-Off
T-Handle
2-Axis Welders Angle Clamps
Tubes
T-Joints
Upright
Position
Stand-Offs
Optional Magnetic Rest supports workpieces.4 per set. Part No. T55410-K4
3-Axis Welders Angle Clamps
With the push of the buttons, the
threaded screws easily slide in and out.
When the job is finished, simply swing
away the 3rd Axis arm for quick and
easy part removal.
Hold parts in position during cool down
to minimize distortion due to contraction.
Available in 3.75 and 4.75 capacities.
Model WAC45-SW comes with a curved
arm for greater workpiece clearance.
Patent No. US 6,860,475 B2
Quick Acting Screw
WAC35-SW
WAC45-SW
4-3/4 Capacity!
Swing AwayArm
Holds a 3-axis workpiece in position before welding.
Features the Quick Acting Screws and Swing Away Arm.
7/28/2019 2011 SH + New Pdts
25/38Toll Free : 800.989.5244 www.stronghandtools.com
LF-2
Part No. Jaw Length (A) Jaw Height T-Clearance (B) Weight
LF-2 7 1-1/2 2-1/2 3.0 lbs178 mm 38 mm 64 mm 1.4 kg
Aluminum 90 Tru-AngL
Accurate Right Angle Fixture is CNC machined for accuracy.
Weld spatter proof & made of high strength aluminum alloy. Holds round, square, flat and angle shapes.
Works on both the outside and inside surfaces.
T-Clearance (B)
JawLength
(A)
Portable MagVise & 90 Tru AngL
Time saving aluminum vises for use in the shop and in the field.
Use the lightweight, compact Portable
MagVise for quick 90 clamping in the
shop, or in the field!Magnets in the walls instantly hold pipes,
tubes, angle iron, or metal plates in
position for fast, accurate clamping at 90.
Model WK50
Features the Quick-Acting Adjustable
Spindle. Press and hold the Quick
Acting Button and the spindle assembly
slides in and out for a super fast set-up!
Release the button and the threads
re-engage for tightening.
Model WP60
Features a Plier/Vise combination for
clamping flat workpieces, such as
metal plates and angle iron. Pliers can
be detached from the vise for easy
removal of welded stock.
Optional Magnetic RestsPart No. T55410-K4
4 pcs. per set
These handy Magnetic Rests are ideal
for light duty holding, positioning, or
steadying long metal pieces and parts.
Portable MagViseNEW
WK50 MagVise with 1 3.35 1.2 2 1.7 lbs Adjustable Spindle 25 mm 85 mm 30 mm 50 mm 0.8 kg
WP60 MagVise with Pliers 1 3.35 1.2 2 1.9 lbs25 mm 85 mm 30 mm 50 mm 0.9 kg
WP601 MagVise Only 1 3.35 1.2 - 0.9 lb25 mm 85 mm 30 mm 0.4 kg
Base Jaw Jaw Max
Part No. Description Height Length Height Capacity Weight
The rotateable spindle allows for holding work-pieces with different thicknesses.
The pliers can mount from front side of theMagVise.
When the job is finished, easily slide the pliers outof the WP60 MagVise.
Use the provided leveling screw and optionalMagnetic Rests to level long workpieces.
WK50MagVise with Quick Acting
Adjustable Spindle
WP60MagVise with Pliers
WP601MagVise Only
Quick Acting Button
Pliers sold separately.Please refer to page 11.
7/28/2019 2011 SH + New Pdts
26/387 Toll Free : 800.989.5244 www.stronghandtools.com
JointMasterAngle Clamping Tools
Fast, precise and affordable clamping tools for corners and T-joints.
PL Series
The single-hand corner clamping tool.
Ideal for quick hold and release on metal,
wood & synthethic materials.
A helping hand to hold stock firmly at
right angles while creating or repairing
permanent joints.
PL Series comes with 1 pair of pliers.
PT Series
The 90 Fixed JointMaster
Retractable plate for edge alignment
V-Grooves for holding round pieces.
Ideal for holding two pieces of different
thicknesses that require individual
adjustments.
PT Series comes with 2 pairs of pliers.
PA Series
The Adjustable JointMaster
Adjustable from 30 - 275.
Adjust to the desired angle & lock into
position with the handle.
Join round & flat workpieces, or materials
with different thicknesses.
PA Series comes with 2 pairs of pliers.
Pivoting HeadAdjusts for varyingthicknesses.
90 Clamp A quick way to hold workpieces
at 90.
Capable of holding a 3-axis
workpiece by adding a
Pipe Pliers (see pg.12).
Wide opening offers
unobstructed welding access.
RetractablePlateMakes edgealignment asnap.
Adjustable HandleCan be tightened &reset to any angle.
Capacity (B) Capacity (B):
PA622 : 0 - 1-1/4
PA634 : 0 - 3
30-275
Capacity (B)Capacity (B):
PL622 : 0 - 1-1/4
PT634 : 0 - 3
Capacity (B):
PL622 : 0 - 3/4
PL634 : 0 - 1-1/4
Capacity (B)
PL622 2 3/4 7-1/2 1.0 lb50 mm 19 mm 190 mm 0.5 kg
PL634 3 1-1/4 8-1/2 1.1 lbs
76 mm 32 mm 216 mm 0.5 kg
PT622 2 1-1/4 7-1/2 1.6 lbs50 mm 32 mm 190 mm 0.7 kg
PT634 3 3 8-1/2 2.5 lbs76 mm 76 mm 216 mm 1.1 kg
PA622 2 1-1/4 7-1/2 2.0 lbs50 mm 32 mm 190 mm 0.9 kg
PA634 3 3 8-1/2 2.4 lbs76 mm 76 mm 216 mm 1.1 kg
UDL365 3 2 9-1/2 1.7 lbs76 mm 50 mm 241 mm 0.8 kg
Throat Max.Part No. Depth (A) Capacity (B) OAL (C) Weight
B
A
C
UDL365
PL / PT / PA Series UDL365
UDL365
PG634V(Sold separately)
A
B
C
7/28/2019 2011 SH + New Pdts
27/38Toll Free : 800.989.5244 www.stronghandtools.com
PowerBase & Ground Hog Grounding Tools
Power through your grounding applications!
High clamping pressure improves arc stability and reduces power consumption.
Prevents current restriction and allows a complete transfer of the electrical current.
Controls the electrical current by isolating the contact surface and the cable connection.
Get a smooth, continuous arc with no fade, and no heat transfer while improving cable
life, and reducing power consumption.
Ground Hog Clamps
The Ground Hog
The groove design on the copperhead seals out
weld spatter and reduces particle buildup.
Side screw provides a secure cable connection.
Ground Hog body rotates for cable positioning.
GP950
Ground HogRated at 530 AMPS@ 60% duty cycle(with 3/0 cable)
PowerBase Grounding Magnet
A
BC
Amperage / Throat Max. Tapped ClampingPart No. Cable Size Depth (A) Opening (B) Hole (C) Pressure OAL Weight
GP630 300A 3 1-1/4 5/16-18 240 lbs 6 0.9 lbGP1530 2/O - 0.427 76 mm 32 mm M8 110 kg 150 mm 0.4 kg
GP950 450A 3-1/2 2-1/2 3/8-16 400 lbs 11 2.4 lbsGP2850 2/O - 0.427 89 mm 64 mm M10 180kg 280 mm 1.1 kg
GP951 530A 3-1/2 2-1/2 3/8-16 400 lbs 11 2.4 lbsGP2851 3/O - 0.475 89 mm 64 mm M10 180kg 280 mm 1.1 kg
Part No. Amperage Dimension Magnetic Force Weight
GM203 300A @ 60% Duty Cycle 2 x 2 x 1.4 44 lbs 0.9 lb50 mm x 50 x 64 20 kg 0.4 kg
GM205 500A @ 60% Duty Cycle 2 x 2.75 x 1.4 110 lbs 2.4 lbs50 mm x 70 x 64 50 kg 1.1 kg
The PowerBase Grounding Magnet sets up quickly and easily. Start grounding instantly
Powerful rare earth magnet delivers heavy duty holding power.
The V machined surface grips round parts.
The copper connector stud is located on top and allows for a full 360 cable rotation.
Rugged, compact steel housing for a fast and safe ground, even in tight spots!
The ON/OFF Lever is easy toturn, even while wearing gloves.
Turn OFF the PowerBase Grounding Magnet and
metal chips fall away.
Holds securely onto round or flatsurfaces.
The copper connector on topallows for 360 cable rotation.
Power through your grounding applications!
NEW
7/28/2019 2011 SH + New Pdts
28/389
Platen Clamps & Hold Down Clamps
Toll Free : 800.989.5244 www.stronghandtools.com
Hold down action clamps with unique features and accessories.
Modular Platen Clamps
Hold Down Clamps
Acorn Bushing
For fast, secure clamping, simply insert the clamp into the 1-3/4"
square hole in your acorn platen. Slide the clamp arm down to the
work piece and turn the T-Handle to tighten.
Choose from Acorn Bushing or Table Mount Models. Clamp comes with standard or heavy duty Swivel Pads.
Unique optional Side-Kick Attachment provides push-action
horizontal clamping force. (See accessories page)
Optional V-Pads can be mounted on the Sliding Arm or
Side-Kick Attachment. (See accessories page)
Part No. Rail Size Pad Opening Throat
UF8NA F Standard 8 4-3/4203 mm 120 mm
UF10NA F Standard 10 4-3/4254 mm 120 mm
UF12NA F Standard 12 4-3/4
305 mm 120 mm
UM12NA M Heavy Duty 12 5-1/2305 mm 140 mm
UM16NA M Heavy Duty 16 5-1/2406 mm 140 mm
UM20NA M Heavy Duty 20 5-1/2508 mm 140 mm
Table Mount
Part No. Rail Size Pad Opening Throat
UF8NC F Standard 8 4-3/4203 mm 120 mm
UF10NC F Standard 10 4-3/4254 mm 120 mm
UF12NC F Standard 12 4-3/4
305 mm 120 mm
UM12NC M Heavy Duty 12 5-1/2305 mm 140 mm
UM16NC M Heavy Duty 16 5-1/2406 mm 140 mm
UM20NC M Heavy Duty 20 5-1/2508 mm 140 mm
Heavy Duty Pad
Acorn Bushing Table Mount Acorn Bushing
For 1-3/4square holes
2.12
2.24
1.6
4 x 1/2
OptionalScrew-onTop V-Pad
Optional Sidekick
Table Mount
See Page 25 for accessories
ptionaScrew-onop - a
ptional Sidekic
Bolt the clamp down to your worktable using the
3/8 hole in the base.
The 1/2" copper plated Acme spindle resists weld
spatter, and the swivel tip makes quick contact
with your workpiece.
Hold pipes by adding our Clip-On V-Pad, Part
#XDA2. (See accessory page 26).
Part No. Capacity Weight
VHD30 2-3/4 2.0 lbs 70 mm 0.9 kg
NEW
Copper PlatedAcme Screw /Ductile Iron Body
2-3/4"MAX.
5.8
4.5
5.62.0
.63
.39
3.0
1.3
Shown with optionalClip-On V-Pad (XDA2).
7/28/2019 2011 SH + New Pdts
29/38
Shark Clamps, Half Clamps & Side Clamps
Precise scissor action clamps with the Quick Acting Buttons.
Toll Free : 800.989.5244 www.stronghandtools.com
Half Clamps Patent No. US 6,983,525 B2
How to Use
Tack weld the front side of 1-1/2" pipe coupon to thelower of the two surfaces. Slide Half Clamp onto the cutpipe, turn the handle until the misaligned materials align.
The Efficient, Safe Way to Align Materials.
The DOG & WEDGE and CUT-OFFC-CLAMP methods of material alignment
are messy, time consuming, and unsafe!
Align materials in the fabrication of
water tanks, bulkheads, deck sections,
flat plates, etc.
For big jobs, tack weld additional 1-1/2"
cut pipes along the joint.
1.96+.000
- .040
3.7 lbs
20 mm Thread
Shark Clamps
QuickActing Button
C-Clamping JawPivoting, hinged arms provide a wide opening.
Inside serrations hold workpieces securely.
Shown with optional rubber pads. (P/N: SCP)Part No. Description Pull Force Opening Weight
SC50 T-Handle 1,000 lbs 5 2.2 lbs455 kg 127 mm 1.0 kg
SC50 Straight 300 lbs 5 2.0 lbsHandle 135 kg 127 mm 0.9 kg
SC65 T-Handle 1,000 lbs 6-1/2 2.5 lbs455 kg 165 mm 1.1 kg
SC65A Straight 300 lbs 6-1/2 2.2 lbsHandle 135 kg 165 mm 1.0 kg
Hinge
Step-Over Applications Uneven Thicknesses Clamp Round Parts
Patent No. US 6,983,012 B2
SC65A
SC50A SC50
Straight Handle Model with soft grip T-Handle Model (Heavy Duty)
A
Side Clamps
Copper Plated Acme Screw Ductile Iron Body
Copper Plated Acme Screw /Ductile Iron Body
Fast Set-ups, just hold the button downand pull-push the handle to desired
clamping position, release the buttonand turn the handle to tighten.
5.753.6
2
2.4
51.9
1.7
Part No. Weight
VSC15 5.6 lbs
2.6 kg
Build push-action clamp to custom heights.
Insert pipe (1-1/2 dia.) of desired length. Base
can be bolt-mounted to the table.
Insert pipe ofany length.
7.5
3.5
2 3
2
Part No.
VHC151.7 kg
3.7 lbs
Weight
7/28/2019 2011 SH + New Pdts
30/38Toll Free : 800.989.5244 www.stronghandtools.com
NOMADEconomy Welding Table
VeryAffordable. FullyAdjustable. EasilyMovable.
MagSpring Clamps(UBV45 - 3-1/2 Cap.)
Multi-Angle Magnet(MS346C)
Mini Magnet(MS346A)
AdjustableMagnetic V-Pads
(XDV4 - 4 magnets)
2 1 1 2
Pull Handle14 Gauge(2 mm)Tabletop
Unique 1.1(28 mm) SlotsAllow for clamping AT ANY POINT.
RetractableGuide RailsOn two sides canbe used as a fence,guides, stops, orclamping edges.
Adjustable HeightTable height adjustsfrom 26 - 32.(660 - 810 mm)
International Patent Pending
Tabletop adjusts to three positions:Horizontal, 30, and Folded for Compact Storage and Mobility.
Three 1.1 (28mm) slots in the tabletop allow for
insertion of clamps to reach any point on the table.
Tabletop tilts to three positions: Horizontal, 30, and
folded for mobility.
Two retractable, perpendicular steel guide rails can be
used as guides, stops, or clamping edges.
Tabletop height can be adjusted from 26 to 32.
Table moves about the work area on 2 sturdy casters.
Nomad Connector PlateNEW
Need more tabletop workspace? Use the Nomad Connector Plate to join
two Nomad Tables together to create a 7.5 (2.3 m) long workstation!
Clamp and work on larger projects, or multiple projects with the fully
adjustable work surface! There are thru holes on all four sides of the
Connector Plate for multiple mounting options.
Part No. Weight
TSL30 16.4 lbs 7.4 kgTSL30 (Includes all mounting screws)
Assembly Example(All Products sold separately)
This 6 piece tool kit contains useful toolsto use in conjunction with the table.
Nomad Economy Tool Kit
Part No. TSK104 (TSK104M)
MagSpring Clamps (UBV45)
Multi-Angle Magnet (MS346C)
Mini-Magnet (MS346A)
Adjustable Magnet V-Pads (XDV4)
2
1
1
2
Nine 1.1 Table Slots
7.5 (2.3 m) Long
TS3020 30 W x 20 L 26 - 32 1.1 0, 30, Folded 350 lbs 44 lbs 760 mm x 510 660 mm - 810 28 mm 160 kg 20 kg
Part No. Tabletop Size Table Height Range Slots in Tabletop Table Positions Load Capacity Weight
7/28/2019 2011 SH + New Pdts
31/38Toll Free : 800.989.5244 www.stronghandtools.com
VT12265Vertical Handle
VT12130Vertical Handle
VT22502-BHorizontal Handle
VT225-DHorizontal Handle
VT36204Push/Pull
VT36202Push/Pull
The ease and speed of a Toggle Clamp combined with the new, unique Quick-Mount Slotted
Base, and Knobbed Spindle. These Toggle Clamps are ideal for holding a workpiece in a positive
location for quick and easy clamping in repetitious work.
The unique twin-slotted base allows the clamp to slide onto two
5/16-18 Hex Head Screws for quick mounting, and removal.
Now you can mount and use a Toggle Clamp anywhere, without
creating a permanent, dedicated set-up. Front and rear slots are
set in a perpendicular configuration for secure slide-in mounting.
For taller workpieces, use the Magnetic Riser Blocks and
Shims Kit to mount the Slotted Base Toggle Clamps at thedesired height. The Magnetic Riser Blocks feature twin holes
for use in either vertical or horizontal position. Use the Shims
for incrementalheight adjustments.
Quick-Mounting!
Stackable Magnetic Riser Blocks & Shims Kit
Uniform 2 (50 mm)Mounting Base
Part No. Description Capacity A B C Stroke Weight
VT36202 Push/Pull 200 lbs 0.81 3.0 2.5 0.75 0.5 lb
VT36204 Push/Pull 300 lbs 1.56 3.9 4.5 1.50 0.8 lb
VT225-D Horizontal 500 lbs 1.37 2.75 6.61 - 0.6 lb
VT22502-B Horizontal 550 lbs 1.34 3.11 8.62 - 1.0 lb
VT12130 Vertical 500 lbs 1.25 2.81 5.50 - 0.8 lb
VT12265 Vertical 750 lbs 1.75 3.58 7.50 - 1.4 lbs
UNIT: inche
Part No. Description Weight
VTX6400 6 pc. Magnetic Riser Blocks & Shims Kit 0.77 lb
0.20
1
3.34
.38
.38
2
Knobbed SpindleLoosen,Slide,Tighten
A quick and easy way toadjust spindle position and
height adjustments.
A
B
C
VT12130VT12265
VT36202VT36204
Riser Blocks and Shims use in conjunction
with the VT36202 Toggle Clamp.
VT225-DVT22502-B
A
C
B
AB
C
Plunger
2 Magnetic Riser Blocks
1 x 1 x 3.34 (25 x 25 x 85 mm)
1 x 2 x 3.34 (25 x 50 x 85 mm)
4 Shims
1 x 0.12 x 3.34 (25 x 3 x 85 mm)
1 x 0.20 x 3.34 (25 x 5 x 85 mm)
The 6 pc. kit comes complete with:
Optional Threaded Adaptors
Convert work surface holes to
5-16/18. Magnetized Threaded
Adaptor Plate mounts under-
neath your work surface, and
provides two 5/16-18 threaded
holes.
Part No. TXT5203
TXT6203Weight: 0.25 lb.
0.11 kg
1
1
2
2
New! Twin Slot Base Toggle Clamps
Stackable Magnetic Riser Blocks & Shims available
7/28/2019 2011 SH + New Pdts
32/383
Good Hand Toggle Clamps
Toll Free : 800.989.5244 www.goodhandinc.com
Ideal time-saving jig and fixture clamps.
Part No. Bar Capacity A B C D E F G H Weight
GH-101-A U 110 lbs 0.75 1.02 0.63 0.94 1.00 1.31 0.17 3.03 0.13 lb
GH-13005 U 150 lbs 0.50 1.21 0.53 0.63 1.03 1.00 0.17 1.40 0.13 lb
GH-12050 U 200 lbs 0.89 1.30 0.50 1.06 1.00 1.56 0.20 3.74 0.38 lb
GH-12050-U U 200 lbs 0.89 1.30 0.50 1.06 1.00 1.56 0.20 3.74 0.38 lb
GH-12070 Fixed 200 lbs 0.89 1.30 0.50 1.06 1.00 1.56 0.20 3.74 0.38 lb
GH-13007 U 330 lbs 0.87 1.97 1.06 1.16 1.73 1.81 0.28 2.31 0.50 lb
GH-12130 U 500 lbs 1.25 2.81 0.75 1.25 1.37 1.81 0.28 5.50 0.78 lb
GH-12132 U 500 lbs 1.25 3.75 0.75 1.25 1.37 1.81 0.28 5.50 0.81 lb
GH-12265 U 750 lbs 1.75 3.58 1.25 1.78 1.94 2.53 0.34 7.50 1.40 lbs
Vertical HandleHold Down Action
Horizontal HandleHold Down Action
A
B C
D
E
F
H
4-G
Fixed
Solid
UNIT: inches
Part No. Bar Capacity A B C D E F G H Weight
GH-201 U 60 lbs 0.37 0.87 0.63 0.63 0.94 0.94 0.17 3.11 0.09 lb
GH-201-A Fixed 60 lbs 0.37 0.87 0.63 0.63 0.94 0.94 0.17 3.11 0.09 lb
GH-22100 U 150 lbs 1.00 2.25 1.06 0.87 1.56 1.37 0.20 5.39 0.24 lb
GH-201-B U 200 lbs 1.00 2.17 1.06 0.87 1.45 1.42 0.20 5.43 0.29 lb
GH-20820 U 220 lbs 2.75 2.68 0.63 1.00 1.25 1.50 0.26 6.41 0.88 lb
GH-225-D U 500 lbs 1.37 2.75 1.00 0.87 1.50 1.42 0.26 6.61 0.59 lb
GH-22185 U 550 lbs 1.13 6.50 1.25 0.87 2.19 1.37 0.28 10.95 0.78 lb
GH-20235 U 750 lbs 1.85 4.2 1.63 1.63 2.25 2.25 0.33 10.31 1.41 lbs
GH-204-G Open 1,400 lbs 2.00 3.00 2.76 1.18 3.54 1.89 0.33 10.55 2.69 lbs
UNIT: inches
Toggle Clamps for Welding Applications
GH-10448 GH-25383 GH-80325GH-36224 GH-204-G
GH-201/201-A GH-22100 GH-201-B GH-20820 GH-225-D
GH-22185 GH-20235 GH-204-G
GH-12050
GH-201-B
GH-101-A GH-13005 GH-12050 / 12050-U / 12070 GH-13007 GH-12130 / 12132 GH-12265
A
BC
D
E
F
H
4-GOpen Bar
7/28/2019 2011 SH + New Pdts
33/38Toll Free : 800.989.5244 www.goodhandinc.com
Toggle design allows instant lock & release of the workpiece.
Good Hand Toggle Clamps
Please call us at 800.989.5244 to request a comprehensive Good Hand Catalog.
GH-30509 GH-10247-AGH-75027 GH-70310GH-43160
DE
G
FA
BCH
J
GH-40323 GH-40341GH-431 GH-451
GH-301-A GH-302-F GH-36003GH-36092 GH-36010 GH-36330GH-304-E
Push/PullStraight Line Action
Latch TypePull Action
GH-301-A 100 lbs 0.63 0.50 2.68 0.63 0.63 1.06 0.17 8-32 1.73 0.11 lb
GH-302-F 300 lbs 1.25 0.96 5.51 1.38 1.61 2.20 0.20 5/16-18 3.07 0.66 lb
GH-36092 400 lbs 1.25 0.96 5.48 1.34 1.63 2.20 0.20 5/16-18 3.15 0.85 lb
GH-36003 600 lbs 1.25 0.97 4.69 1.44 1.34 1.97 0.26 5/16-18 3.23 0.78 lb
GH-36010 800 lbs 1.63 1.75 6.75 1.63 1.63 2.25 0.34 3/8-16 4.06 1.76 lbs
GH-304-E 850 lbs 1.65 1.25 6.25 1.62 1.62 2.25 0.33 3/8-16 3.87 1.28 lbs
GH-36330 2,500 lbs 2.00 0.81 7.00 1.37 1.63 2.25 0.34 3/8-16 2.83 2.06 lbs
Part No. Capacity A B C D E F G H J Weight
GH-40323 360 lbs 0.47 0.63 1.03 0.75 1.11 0.75 2.24 0.78 0.39 0.16 lb
GH-431 700 lbs 0.50 0.63 1.03 0.75 1.11 0.75 2.24 0.78 0.39 0.50 lb
GH-451* 375 lbs 1.44 0.75 1.50 1.37 1.94 0.31 8.31 2.00 1.50 0.59 lb
GH-40341 2000 lbs 0.98 1.63 2.37 1.50 2.13 1.75 4.50 1.50 0.75 1.50 lbs
*Adjustable single hook design. Optional latch plate GH-451-LP.
GH-36202 200 lbs 0.75 2.48 0.95 0.91 1/4-20 0.37 0.81 0.50 2.96 0.25 lb
GH-36204 300 lbs 1.50 4.53 1.22 1.18 5/16-18 0.43 1.56 0.63 3.86 0.60 lb
GH-36003
GH-431
GH-36202GH-36205
Mounting Plate for GH-36204
A
BC
DE
4-F
H
G THD
UNIT: inche
UNIT: inche
UNIT: inche
A
B
JD
L
KH
F THD
PlungerPart No. Capacity Stroke A B D F H J K L Weight
PlungerPart No. Capacity Stroke A B C D E F G H Weight
7/28/2019 2011 SH + New Pdts
34/385 Toll Free : 800.989.5244 www.stronghandtools.com
Accessories
Replacement Parts and Accessories.
T-Strap Bolts (For Pliers)
For Step-Over applications.
P/N Thread Length
840435 3/8-16 3-1/2840435M M10 89 mm
840335 5/16-18 2-1/2840335M M8 64 mm
1-1/2
2-1/23/8"
5/16"
2
3-1/2
Fixed Glides (For Pliers)
With non-maring rubber pads.
P/N Thread Length
854740P 3/8-16 2854740PM M10 51 mm
2"
1.5"
0.3
Heavy Duty Replaceable Pads
P/N Description
XMJ Joint & Pad Kit for UM & UP Clamps
XMA1 Replacement Pad only
XMJ XMA1
Replacement joints and pads forUM & UP clamps.
Big Hex Spindles (For Pliers)
Fixed head spindles for Multi-PurposePliers.
P/N Thread Length
854714 3/8-16 2.6854714M M10 66 mm
854713 5/16-18 1-1/5854713M M8 30 mm
1.2
0.70 0.74
2.63
Crank Handles (For Pliers)
Optional or replacement handles forall Strong Hand Tools Pliers.
P/N Thread For Pliers
PXH11 3/8-16 11 Plier sM10 280 mm
PXH6 5/16-18 6, 8-1/2 Plier sM8 215 mm
PXH6
PXH11
Swivel / Pivot Pads (For Pliers)
Flat pads pivot at 150 and roundpad swivels at 360.
P/N Thread Length
854944 (Pivot) 3/8-16 3.2854944M M10 81 mm
854940 (Swivel) 3/8-16 2.6854940M M10 66 mm
854930 (Swivel) 5/16-18 2.6854930M M8 66 mm
854935 (Swive l) 5/16-18 3.1854935M M8 78 mm
3.2
1.73"
2.6
1"
3.1
1"
150 Pivot Swivel
Pliers Replacement Parts
Spring & Adjustment Bolt for Pliers.
P/N For Pliers
PXS11 11 Plier s
PXS6 6 & 8-1/2 Pliers
PXB11 11 Plier s
PXB6 6 & 8-1/2 Pliers
Spring - 4 per setPXS11PXS6
Adjustment Bolt
PXB11PXB6
U-Clamps Replaceable Parts
P/N For U-Clamps Series
XER UE Series
XFR UF Series
XGR UGSeries
XMR2 UM Series (Equipped with H.D. Pad)
XMRP2 UM Series (Equipped with Standard Pad)
XPR UPSeries
Replaceable Arm and Spindle Kits
P/N Description
XMT Spindle for UM Series
XPT Spindle for UP Series
XMAR55-W Clamp Arm for UM Series
XPAR Clamp Arm for UP Series
Individual Clamp Arms and Spindles
P/N Description
XLK For UE, UF, UG & UM series clamps.
Spring Stop Replacement Kit
XMAR55-W
XPAR
XLK
XMT
XPT
7/28/2019 2011 SH + New Pdts
35/38Toll Free : 800.989.5244 www.stronghandtools.com
Accessories
Accessories for Utility Clamps, Multi-Purpose Pliers and Expand-O Pliers.
Attach to Expand-O Pliers for widespreading jobs and U-clamps for
Step-Over applications.
P/N L A Expand-O For Clamps
L
A
1/2 NPT
XDJ 1-1/16 5/16-18 PE6, PE62 UD SeriesXDJM 27 mm M8 PE6M, PE62M
XFJ 1-5/32 3/8-16 PE10 UE, UF, UGXFJM 29 mm M10 PE10M UM, UP
Bench Rests (For U-Clamps)
Supports U-Clamp in StandingPosition.
P/N For U-Clamps Series
XDU UD Series
XMU2 UM Series
XDU
XMU2
Sidekicks (For U-Clamps)
Mount onto U-Clamps for 2-axishorizontal clamping.
P/N L Stroke For Clamps
XDS 3-1/8 1 UD SeriesXDSM 79 mm 25 mm
XFS 4-3/8 1-3/8 UF SeriesXFSM 111 mm 35 mm
XGS 4-3/8 1-3/8 UG SeriesXGSM 111 mm 35 mm
XMS 4-3/8 1-3/8 UM SeriesXMSM 111 mm 35 mm
L
Extender Blocks (For U-Clamps)
Attach to U-Clamps for Step-Overand Spreading applications.
P/N Thread D L For Clamps
XDB1 5/16-18 3/4 1 UD Series XDB1M M8 16 mm 25 mm
XFB 3/8-16 45/64 2 UE, UF, UG XFBM M10 18mm 51 mm Series
XMB2 3/8-16 1-3/16 2 UM, UP XMB2M M10 30 mm 51 mm Series
D L
Thread
4-IN-1 Packages (For U-Clamps)
P/N V-Pad / Extender Block
XDVB XDV / XDB1 (For UD Models)XDVBM
XFVB XFV / XFB (For UE, UF, UG Models)XFVBM
XMVB XMV / XMB2 (For UM, UP Models)XMVBM
Convert all Utility Clamps into4-IN-1 Clamps. Includes a V-pad,an Extender Block, and a screw.
Extender BlockV-Pad
Screw
Magnetic V-Pads
Tapped For ForP/N Hole Clamps Pliers
XDV2 5/16-18 UD Series PG622 / PG634 M8
XDV4 5/16-18 - - M8
XFV2 3/8-16 UE, UF, UG PG114 / PG134 M10 Series PG204 / PGA20
XFV4 3/8-16 - - M10
Rare earth magnetic V-Pads forholding round and angled pipes.
2 magnets Version(Top only):
XDV2 / XFV2
4 magnets version(Top & Bottom):
XDV4 / XFV4
Magnets Magnets
Magnets
XDV4 & XFV4 are table mount versions.
Top V-Pads (For U-Clamps)
P/N For U-Clamps Series
P/N For U-Clamps Series
STAINLESS
STEEL
Attach to the top of Utility Clampsequipped with Standard Pads.
Light Duty & Value Series
XDA2 UD Series
XFA2 UE, UF, UG Series
XMA2 UM, UPSeries
XDA2S UD Series
XFA2S UE, UF, UG Series
XMA2S UM, UPSeries
XMA UM, UP Series
XMAS UM, UP Series
Screw-On V-Pads
Attach to the top of Utility Clampsequipped with Heavy Duty Pads.
For Regular and Heavy Duty Series
S.S.
V-Pads (For U-Clamps & Pliers)
Standard V-Pads
Attach to pliers or clamps to holdround and angled workpieces.
Tapped For ForP/N Hole Clamps Pliers
XDV 5/16-18 UD PG622M8 Series PG634
XFV 3/8-16 UE, UF, UG PG114 / PG134M10 Series PG204 / PGA20
XMV 3/8-16 UM , UP -M10 Series
XDVS 5/16-18 UD PG622M8 Series PG634
XFVS 3/8-16 UE, UF, UG PG114 / PG134M10 Series PG204 / PGA20
XMVS 3/8-16 UM, UP -M10 Series
STAINLESS
STEEL
Pipe Adaptors (For Expand-O Pliers)
7/28/2019 2011 SH + New Pdts
36/387 Toll Free : 800.989.5244 www.stronghandtools.com
Heavy Duty 4 Beam support baseprovides a 2 ton load capacity.
Precision, ground steel plates, with CNCmachined 5/8 holes in a 2 grid pattern forlocating, positioning and holding your fixturewith the BuildPro clamps and components.
Plates can be reconfigured toextend the width of the tablefor larger projects.
Heavy Duty Leveling Feetensure proper leveling of thetable on uneven surfaces.
1-3/4 T-slot spacing
designed for optimumflexibility.
BuildProWelding Tables
The affordable, professional BuildPro Welding Tables
are setting a new standard in price and performance.
The BuildPros modular design gives you the flexibility to adapt to each
new project easily. Youll work more safely, and more efficiently, so youcan increase both your productivity, and the quality of your work.
Insert the clamp intothe T-slot and slidealong the entiresurface for positioningat any point.
Clamp swivels 360.
360 Clamps
BuildPro Clamps
Fit into the 5/8 gridholes for fast andeasy clamping.
Clamp swivels 360.
Inserta-Clamps
Save time and money by holding, positioning, and locating quickly and easily with a wide variety of BuildPro
Clamps and Components. Please visit our website at www.stronghandtools.com for more information or call
us at Toll Free 1-800-989-5244 to request the complete BuildPro Welding Table Catalog.
The table youll rely on everyday...
Faster Fixturing. Consistent Results. Greater Productivity.
7/28/2019 2011 SH + New Pdts
37/38
Valtra Components
Standard Machine Parts and Tooling Components
Toll Free : 800.989.5244 www.valtrainc.com
Cam Action Clamps Forged Adjusta-Clamps Adjustable Handles
HandwheelsRotary T-Slot Nuts Spring Stops
Handknobs Cap Screw Hook Clamps Speed Ball Handles Crank Handles
Clamping Levers Lifting Eyebolts Leveling Pads Heavy Duty Fixed Glides
T-Slot Bolts Rotary T-Slot Bolts Plain Eyebolts T-Strap Bolts
Bedding Supports
Center Cam Clamps
Our Valtra catalog features a wide range of Clamps, Machine Parts, Tooling Components,
and Fasteners. Call to request a copy of the full line catalog. Modifications to standard parts
and custom requests welcome.
7/28/2019 2011 SH + New Pdts
38/38