Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

1

2013 Nissan Altima Sedan CM6200/Blade-AL Install

TOOLS AND PARTS 1. Digital Multi-Meter 2. Crimpers 3. Soldering Iron and Solder 4. Panel Removal Tool(s) 5. 10mm socket 6. Phillips Head Screwdriver 7. CM6200 8. ADS Blade-AL 9. (1) Relay and (5) 1A Diodes

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

2 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Connections FUNCTION COLOR LOCATION POLARITY 12 VOLTS (40A) Green Backside of driver’s side dash fuse box, white 1 pin plug (+) 12 VOLTS (40A) White BCM, behind instrument cluster, white 15 pin plug, pin 11 (+) (+) IGNITION White BCM, behind instrument cluster, black 40 pin plug, pin 27 (+) (-) IGNITION Green BCM, behind instrument cluster, black 40 pin plug, pin 30 (-) ACCESSORY 1 Red BCM, behind instrument cluster, black 40 pin plug, pin 26 (+) ACCESSORY 2 Pink BCM, behind instrument cluster, black 24 pin plug, pin 9 (+) (+) STARTER Red IPDM under the hood, black 1 pin plug (+) (-) STARTER 1 Brown BCM, behind instrument cluster, black 40 pin plug, pin 22 (-) (-) STARTER 2 Red IPDM under the hood, white 32 pin plug, pin 15 (-) PARKING LIGHTS Red Front of driver’s side fuse box, brown 16 pin plug, pin1 (+) DISARM/UNLOCK Empty OR Tan BCM, behind instrument cluster, green 40 pin plug, pin 34 (-) ARM/LOCK Empty OR Green BCM, behind instrument cluster, green 40 pin plug, pin 19 (-) TRUNK RELEASE Brown BCM, behind instrument cluster, black 40 pin plug, pin 40 (-) DRIVER’S DOOR PIN Brown BCM, behind instrument cluster, gray 24 pin plug, pin 16 (-) PUSH-TO-START (PTS) Red BCM, behind instrument cluster, green 40 pin plug, pin 1 (-) SECURITY LIGHT Green BCM, behind instrument cluster, green 40 pin plug, pin 18 (-) CAN HIGH Blue BCM, behind instrument cluster, black 40 pin plug, pin 20 (DATA) CAN LOW Pink BCM, behind instrument cluster, black 40 pin plug, pin 19 (DATA)

BLADE-AL with DL-NI3

Feature coverage

DATA

IMM

O B

YPAS

S

SECU

RE T

AKEO

VER

DOO

R ST

AT O

UTP

UT

HOO

D ST

AT O

UTP

UT*

TRU

NK

STAT

OUT

PUT

BRAK

E PE

DAL

STAT

US

TACH

OM

ETER

OU

TPU

T

E-BR

AKE

OU

TPU

T

2013 Altima Sedan Y Y Y Y Y Y Y Y

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

3 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Disassembly

1. Remove panel from the front, left hand side of the center console.

2. Remove (2) 10mm bolts holding the hood and gas flap release levers in place.

3. Remove the silver trim piece on the left side of the radio/climate

control panel.

4. Remove (2) Phillips head screws from the front of the steering column shroud. These screws can be accessed by turning the steering wheel left and right.

5. Remove the top half of the steering column shroud and pull the

black trim panel surrounding the instrument cluster straight towards you and remove.

6. Remove (1) Phillips head screw above the instrument cluster.

7. Unclip and remove panel surrounding push-to-start switch and

instrument cluster.

8. Remove (2) Phillips head screws from left and right of instrument cluster to remove and access BCM.

9. *Optional: Remove (1) Phillips head screw from the bottom side of

the steering column shroud. This is only needed to access the horn wire.

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

4 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Body Control Module

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

5 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Black 24-Pin Connector @ BCM

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

6 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Green 40-pin Connector @ BCM

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

7 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Black 40-pin Connector @ BCM

*The rear/mirror defroster wire will only test while the engine is running. Program as a latched (-) output from the remote starter.

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

8 2013 Nissan Altima Sedan CM6200/Blade-AL Install

Gray 24-Pin Connector @ BCM

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

9 2013 Nissan Altima Sedan CM6200/Blade-AL Install

+12V Power to Remote Start

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

10

2013 Nissan Altima Sedan CM6200/Blade-AL Install Brown Connector @ Driver’s Side Fuse Box

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

11

2013 Nissan Altima Sedan CM6200/Blade-AL Install IPDM Connections, under hood

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

12

2013 Nissan Altima Sedan CM6200/Blade-AL Install IPDM Connections Continued

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

13

2013 Nissan Altima Sedan CM6200/Blade-AL Install (-) Horn Trigger