Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

1

2013 Toyota Camry PTS with ALCA (RS-TL6)

TOOLS AND PARTS 1. Digital Multi-Meter 2. Crimpers 3. Soldering Iron and Solder 4. 10mm Socket 5. #2 Phillips Head Screwdriver 6. ADS-AL CA

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

2 2013 Toyota Camry PTS with ALCA (RS-TL6)

Connections

FUNCTION COLOR LOCATION POLARITY +12 Volts Black Steering lock, black 7-pin plug, pin 7 (+) Ignition Light Green Steering lock, black 7-pin plug, pin 6 (+) Parking Lights White or Black Main body ECU, white 30-pin plug, pin 30 (-) CAN High Blue OBDII connector, white 16-pin plug, pin 6 (DATA) CAN Low White OBDII connector, white 16-pin plug, pin 14 (DATA) RX Green Main body ECU, white 30-pin plug, pin 25 (DATA) TX Red Main body ECU, white 30-pin plug, pin 26 (DATA)

Push-to-start (Push Signal)* Purple Push-to-start button, black 10-pin connector, pin 1 *Optional, only required if idle (pit stop) mode is desired. (-)

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

3 2013 Toyota Camry PTS with ALCA (RS-TL6)

Main Body ECU behind driver’s side dash

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

4 2013 Toyota Camry PTS with ALCA (RS-TL6)

Steering Lock Connector @ Bottom Side of Steering Column

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Page

5 2013 Toyota Camry PTS with ALCA (RS-TL6)

OBDII Connections (viewed from the front, female pin side)