2014 TECHNICAL TEAM TRAINING - Online Portfoliosportfolios.creativegroup.com/c/56175/8f78b3d2121caaef2f70f0d4f202... · Halliburton methodology for the evaluation ... This course

Solving challenges.™

2014 TECHNICAL TEAM TRAINING

CYPHERSM Seismic-to-Stimulation Training June 30 - July 25, 2014Houston, Texas

Purpose Provide Tech Team experts with understanding of the CYPHERSM Seismic-to-Simulation workflow, to support the deployment of CYPHER projects in their home locations. Ongoing software training and mentoring.

This training is an intense technical program designed to provide skills and experience in the work-flow and to foster strong and effective teamwork between Tech Team members.

You will receive certification in the CYPHERSM Seismic-to-Simulation workflow on completion of this course.

FormatTraining and hands-on project-work in the key software enablers and critical workflow steps for CYPHER projects.• Prep knowledge: pre-requisite training by discipline• Fast Track: Classroom training by discipline• Maintaining and Enhancing: hands-on project work on relevant data sets to reinforce classroom

learnings; ongoing

Preparatory Knowledge All pre-requisite training appropriate to your discipline should have been completed before attend-ing the classroom training.

Fast Track Classroom TrainingDuration: 4 weeks

Location: Houston, TX, USA

Participants receive a technical laptop already loaded with all required software to support classroom training. Attendees will take these laptops back to their home country as their primary machine for ongoing work within the Tech Team.

Training is framed around the CYPHERSM Seismic-to-Simulation workflow, providing technical train-ing on individual software enablers and workflow steps as well as an understanding of the overall Halliburton methodology for the evaluation and development of Unconventionals.

This training will provide individuals with knowledge and skills relevant to their own discipline as well as understanding of the interactions between the disciplines which are critical to a successful CYPHER engagement.

Maintaining and EnhancingFollowing the classroom training, each team will be tasked with applying their knowledge to a real data set from an Unconventional Asset. Upon return to their home country, time will be allocated to work together as a team to apply the tools and processes covered in the training and generate insight and recommendations for optimum development of the asset. Once completed, the team will present their findings and recommendations to a panel of Subject Matter Experts to demonstrate their competence in the CYPHERSM Seismic-to-Simulation workflow.

On a periodic basis, teams will also be given the opportunity to participate in online or classroom training as new releases of key software enablers come out.



PROJECT EXECUTION AND EVALUATION TRACKOn completion of the classroom training, Tech Teams will return home to apply the knowledge they have gained to a real data set. Time will be allocated for them to work together to apply the CYPHER workflow and generate insights and recommendations to add value for both the “customer” and Halliburton.

Outputs from this work will be presented to a panel of Subject Matter Experts who will assess the accurate and effective use of the CYPHER tools and processes, and the Team’s ability to develop and articulate the value that the CYPHER workflow can generate.

CORE UNCONVENTIONAL PRINCIPLES TRACKIn Week 1, all attendees will receive an overview of the challenges associated with evaluating, exploring and developing Unconventional Resources, along with a high level introduction to key solution approaches for each discipline. This week will help the teams understand how each discipline complements the others in a CYPHER engagement and how the CYPHER workflow enhances our and our customers’ businesses.

RESERVOIR CHARACTERIZATION TRACKParticipants of this track will learn DecisionSpace Fundamentals, which is the base for several of the following classes. As well as DecisionSpace WellPlanning for Geologists and DecisionSpace Basic Geophysics. In addition, attendees will have two days of Reservoir Characterization classes that will create a solid foundation for their understanding of Unconventional Resources.After week 2, the Reservoir Characterization track will divide itself into two additional tracks:

• Petrophysics track, where the ShaleXpert software will be the main focus and attendees will have a full week of hands-on training, building and analyzing ShaleXpert logs.

• Earth Modeling track. In this track, the G&G group will take additional classes on the different DecisionSpace modules, including DecisionSpace Earth Modeling. And in the final week, they will build an Earth Model from a real project previously created by our CYPHER team in GTS.

DRILLING OPTIMIZATION TRACKThis course is hands-on training on key software solutions used for well design and optimization with focus on the development of unconventional reservoirs. It covers WELLCATTM software for casing design, the new WellPlan solution for planning of wells including Halliburton’s proprietary DrillingXpert and DecisionSpace Collaborative Well Planning with the geosteering module to monitor real time drilling.

FRAC TRACKParticipants will receive training on the CYPHER software suite as well as some of the most important software utilized in fracture design. They will start with GOHFER, which is a planar 3-D geometry fracture simulator. Then cover shale pressure diagnostics and DFIT analysis. Finally, on the last week, they will focus on reservoir simulation and also see how some of those technologies and applications have been successfully utilized by Halliburton, specifically in our North America operations.


WEEK 1 DAY 1 Jun 30

DAY 2 Jul 1

DAY 3 Jul 2

DAY 4 Jul 3

DAY 5 Jul 4

CORE Unconventionals

Principles

North Belt Classroom

LC-2401

Welcome and Opening Remarks

Geology for Source Rock

Drill to FracFrac for

Unconventionals

HOLIDAY

Brady Murphy, Senior Vice President,

Business Development & Marketing

Introduction to Unconventionals & BAP for Tech Teams

Rob Hull Ken Williams Ron DirksenJonathan Smith &

Brandon Sanders & Tim Grace

LUNCH LUNCH LUNCH LUNCH

Methodology to the Development of

Unconventionals

Goechemistry Principles for

Unconventionals

ShaleXpert-TightGasXpert

Workflows

Horizontal Completion Solutions

Ron Dusterhoft

Joel Gevirtz

Dan Buller Ben WellhoeferGeomechanics Approach for

Unconventionals

Claudia Santana


WEEK 2 DAY 1 Jul 7

DAY 2 Jul 8

DAY 3 Jul 9

DAY 4 Jul 10

DAY 5 Jul 11

Reservoir Characterization

Track


LC-2401

DecisionSpace® Fundamentals



DecisionSpace® Well Planning for Geologists

DecisionSpace® Basic Geophysics

Dean Mento & Kalyan Saikia Joel Gevirtz Joel Gevirtz Chakrapani Siruvuri Dean Mento &

Kalyan Saikia

WEEK 2 DAY 1 Jul 7

DAY 2 Jul 8

DAY 3 Jul 9

DAY 4 Jul 10

DAY 5 Jul 11

Drilling Optimization

Track North Belt Classroom

LC-2208

DecisionSpace® - Collaborative Well

Planning


Planning


Planning

Collaborative StressCheck and

Casing Seat


Casing Seat

Chackrapani Siruvuri Chackrapani Siruvuri Chackrapani Siruvuri Ashish Fatnani Ashish Fatnani

WEEK 2 DAY 1 Jul 7

DAY 2 Jul 8

DAY 3 Jul 9

DAY 4 Jul 10

DAY 5 Jul 11

Frac Track


LC-2413

GOHFER GOHFER GOHFER DFIT DFIT

Wendell Salas Wendell Salas Wendell Salas Hap Pinkerton Hap Pinkerton


WEEK 3 DAY 1 Jul 14

DAY 2 Jul 15

DAY 3 Jul 16

DAY 4 Jul 17

DAY 5 Jul 18

Petrophysics Track


LC-2210

DecisionSpace®

Geology & Log

Calculator Room : LC-2401

Petrophysics for Unconventionals

Shale Xpert/TightGasXpert

(High Level)


(High Level)


(High Level)

Dean Mento & Kalyan Saikia Ken Huggins Dan Buller &

Jim WitkowskyDan Buller &

Jim WitkowskyDan Buller &

Jim Witkowsky

WEEK 3 DAY 1 Jul 14

DAY 2 Jul 15

DAY 3 Jul 16

DAY 4 Jul 17

DAY 5 Jul 18

Earth Modeling

Track


LC-2401

DecisionSpace®

Geology & Log

Calculator

DecisionSpace®

Dynamic Frameworks to Fill

DecisionSpace® Dynamic

Frameworks to Fill

DecisionSpace® Earth Modelling

DecisionSpace® Earth Modelling

Dean Mento & Kalyan Saikia



Kalyan Saikia & Rodolfo Romero

Kalyan Saikia & Rodolfo Romero

WEEK 3 DAY 1 Jul 14

DAY 2 Jul 15

DAY 3 Jul 16

DAY 4 Jul 17

DAY 5 Jul 18


Track


LC-2208


Casing Seat

DecisionSpace® Well Engineering



DES and DrillingXpert

Ashish Fatnani Ashish Fatnani Ashish Fatnani Ashish Fatnani Jeremy “Jez” Greenwood

WEEK 3 DAY 1 Jul 14

DAY 2 Jul 15

DAY 3 Jul 16

DAY 4 Jul 17

DAY 5 Jul 18

Frac Track

City West

Classroom Dining Room

Microseismisc CYPHERSM Software Suite

CYPHERSM Software Suite



Dion Billard

CYPHERSM Software Suite Shea Evans &

John Sullinger & Nicholas Sperrazza

Shea Evans & John Sullinger &

Nicholas Sperrazza


Nicholas Sperrazza


Nicholas SperrazzaShea Evans & John Sullinger &

Nicholas Sperrazza


WEEK 4 DAY 1 Jul 21

DAY 2 Jul 22

DAY 3 Jul 23

DAY 4 Jul 24

DAY 5 Jul 25

Petrophysics Track

City West

Classroom CW-1437B

ShaleXpert - hands on project





Nerio Quintero Nerio Quintero Nerio Quintero Nerio Quintero Nerio Quintero

WEEK 4 DAY 1 Jul 21

DAY 2 Jul 22

DAY 3 Jul 23

DAY 4 Jul 24

DAY 5 Jul 25

Earth Modeling

Track

City West Classroom

CW-Brazos Room

Earth Modeling - hands on project





Carlos Davila & Stephen Galiette





WEEK 4 DAY 1 Jul 21

DAY 2 Jul 22

DAY 3 Jul 23

DAY 4 Jul 24

DAY 5 Jul 25


Track


LC-2401

Well Cat Application



Geostering, Acoustics and

Brittleness Mapping for

Unconventionals

Geostering, Acoustics and

Brittleness Mapping for

Unconventionals

Moetaz Mostafa Moetaz Mostafa Moetaz Mostafa Roland Chemali Roland Chemali

WEEK 4 DAY 1 Jul 21

DAY 2 Jul 22

DAY 3 Jul 23

DAY 4 Jul 24

DAY 5 Jul 25

Frac Track

City West

Classroom CW-727A

Slate Effective Fracture System

QuickLook QuickLook QuickLook

Karelis UrrutiaJeremy Magness &

Paul Aleman & Julie Foster &

Ian FisherLeopoldo Sierra Leopoldo Sierra Leopoldo Sierra


PRESENTERS:Brady Murphy Senior Vice President Business Development & Marketing Global Business Development

Rob Hull Manager, Technology - ESSA Region Business Development

Ron Dusterhoft Technology Fellow, Production Enhancement Production Enhancement

Ken Williams Geologist - GTS Global Business Development - Marketing - GTS

Joel Gevirtz Specialist Consultant Subject Matter Expert Consulting & Project Management

Claudia Santana Consultant III Consulting & Project Management

Ron Dirksen Strategic Business Manager Sperry Drilling Services

Dan Buller FRS Global Advisor Unconventional Optimization Wireline and Perforating

Jonathan Smith Account Representative Production Enhancement

Brandon Sanders Principal Technical Professional Production Enhancement

Tim Grace Account Representative Production Enhancement

Ben Wellhoefer Global Product Champion - Horizontal Completions Completion Tools

Dean Mento Geophysicist Landmark Software & Services

Kalyan Saikia Principal Technical Advisor Landmark Software & Services

Chakrapani Siruvuri Consultant III Landmark Software & Services

Wendell Salas Technical Advisor - Denver Tech Team Production Enhancement

Ashish Fatnani Consultant Landmark Software & Services

Hap Pinkerton Technical Advisor - PE & Cement Production Enhancement

Dion Billard Senior Technical Professional Leader - Technology Production Enhancement

Shea Evans Senior Technical Professional Production Enhancement

John Sullinger Technical Professional Production Enhancement


PRESENTERS:Nicholas Sperrazza Technical Professional Production Enhancement

Ken Huggins Petrophysics Advisor Consulting & Project Management

Jim Witkowsky Senior Scientific Advisor-Physics Wireline and Perforating

Rodolfo Romero Earth Modeling Regional Business Tech. Lead - Latin America Landmark Software & Services

Jeremy “Jez” Greenwood Chief Advisor DES: Drilling Performance Sperry Drilling Services

Nerio Jose Quintero Petrophysicist & Log Analysis Leader Wireline and Perforating

Carlos Davila Geologist-Geomodeler Global Business Development - Marketing - GTS

Stephen Galiette Geophysicist Global Business Development - Marketing - GTS

Moetaz Mostafa Consultant Landmark Software & Services

Karelis Urrutia Reservoir Engineer Business Development

Jeremy Magness Principal Technical Professional - Oxy Production Enhancement

Paul Aleman Technical Professional Production Enhancement

Julie Foster Technical Professional Frac/Acid Production Enhancement

Ian Fisher Technical Professional Production Enhancement

Leopoldo Sierra Technology Manager - Fracturing Center of Excellence Production Enhancement

Roland Chemali Technology Fellow Sperry Drilling Services


NOTES:


NOTES:

www.halliburton.com

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained

in the contract between Halliburton and the customer that is applicable to the sale.

06/14 © 2014 Halliburton. All Rights Reserved.

Documents

2014 TECHNICAL TEAM TRAINING - Online Portfoliosportfolios.creativegroup.com/c/56175/8f78b3d2121caaef2f70f0d4f202... · Halliburton methodology for the evaluation ... This course