View
15
Download
1
Embed Size (px)
Citation preview
Power Distribution CentersPower Distribution Centers
Contact Kyle Beebe for More Information 806.588.0832www.zachrygroup.com
• 12 GA Galvannealed steel (A40 ASTM A653) interlocking panels
• PDC Floor/Base is blasted to a “white metal” finish and coated with a 6 MIL layer of Epoxy Coating or upgraded to a Zinc Rich primer with Urethane topcoat for even greater longevity
• INDUSTRY Leading Doors and Hardware! It doesn’t get any better than this. See the back for more details
• Sprayed on closed cell insulation underneath and in the sidewalls create an air tight, moisture resistant environment/wall system
• Easy installation and connection will steam line your project
• Customized and Scaled Buildings for your specific project and needs
• Complete Turn Key, Managed, EPC solutions available for your organization
Power Distribution CentersFEATURES AND BENEFITSPower Distribution CentersFEATURES AND BENEFITS
DOORS• Heavy duty (3) point locking system with interior “panic bar” and
exterior handle with ½” diameter padlock hole or keyed access
• Vandal resistant bolt on stainless steel hinges with grease fittings and stainless steel pins
• Zinc-plated prop rod and door stop to prevent unnecessary door slams or damage
ROOF• 14 GA galvannealed steel (A40 ASTM A653) welded and
rivoted into place for greater longevity and NO LEAKS.
• All seams caulked with 50 year RTV silicone
HVAC• HVAC systems are designed around project specific conditions
and internal equipment heat loads to maintain interior temperatures within the required parameters.
• Industrial grade package units are typically used to meet HVAC requirements and are normally installed on the building ends for efficiency sake
ZACHRY CRAFTMENSHIPSee skid description.
ZACHRY E4 QUALITYSee skid description.
TIME SENSITIVESee skid description.
Contact Kyle Beebe for More Information 806.588.0832www.zachrygroup.com