21.Amphenol Jaybeam Product Catalogue - Europe, Africa and Middle East

Amphenol Telecom Solutions – Product Overview Section A
Antennas Section B
Accessories for Telecommunication Applications Section F
Assembly & Installation Instructions Section G
Fibre Optic Products Section H
Data / Networking Products Section I
Glossary Section J
Introduction to Amphenol Corporation
Amphenol was founded in 1932. The company is one of the largest manufacturers of interconnect products in the world. The company designs, manufactures and markets electrical, electronic and fibre optic connectors, interconnect systems and coaxial and flat-ribbon cable.
Its activities are geared towards 7 major markets: Aerospace / Military, Automotive, Broadband Communication, Industrial, Internet Equipment, Mobile Phones and Wireless Infrastructure.
Amphenol is headquartered in Connecticut, USA and employs more than 28,000 people on a worldwide basis with manufacturing and assembly operations in the Americas, Europe and Asia.
Amphenol’s Contribution to Telecom Networks
Amphenol is a leading global interconnect solutions provider to the wireless infrastructure market including applications such as cellular base stations, radio links, mobile switches, wireless routers, wireless local loop and cellsite antenna systems, combiners, transceivers, filters and amplifiers. Amphenol offers a wide product portfolio for every wireless standard and generation radio technology including 2.5G, 3G, WiMAX and future IP solutions.
The product range includes RF, low frequency, power and fiber-optic connectors and cable assemblies, antennas, backplane interconnect systems and power distribution systems.
This catalog details the most commonly used products for telecom networks. Should you require a product which is not listed in the catalog, please forward your request to Amphenol.
Notice
Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied.
Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all products.
Contact
Amphenol Jaybeam Rutherford Drive, Park Farm South Wellingborough, Northamptonshire, NN8 6AX England
Tel: +44 (0) 1933 408 408 Fax: +44 (0) 1933 408 404
Email: [email protected] Web: www.amphenol-jaybeam.com
Where Can Amphenol Service Your Requirements?
Antennas
Cable Assemblies
Section C Section D Section E
Lightning Arresters Earthing Kits Cable Clamps
Section F Section F Section F
Amphenol is the only company that supports the entire interconnect requirements of a cellular infrastructure system.

Splitters & Couplers Combiners – Dual-band & Tri-band Tower Mount Amplifiers (TMA)
Power Distribution Units for TMAs Gland Plates & Grounding Bars Lugs
Consumables Calibration Kits Tools
Fibre Optic Products IP67 Ethernet Connectors Infiniband
Section H Section I Section I
(AISG) Antenna Interface Standards Group Connectors & Cable Assemblies
Backplane Systems Busbars
Filtered Terminal Blocks and Headers Quick Connect Jumpers Systems Integration TCS
Contact Amphenol Contact Amphenol Contact Amphenol

Product Overview
- UHF & VHF Base Station Antennas
- Marine Antennas
- Camouflage Solutions
Amphenol Jaybeam SmartTilt™ - Remote Electrical Tilt Technology Pages B5 – B6
Cellular Antennas Pages B15 – B68
PMR Antennas Pages B69 – B196
Notice
Specifications are subject to change without notice. Contact your nearest Ampheno l Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, w arranty, or responsibility of any kind expressed or implied.
Stateme nts or suggestions concerning possible use of our products are made without representation or warranty that any such use is f ree of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all products.
Miniature Antennas
- Swivel Antenna 45°~90° for GSM/DCS
- Swivel Antenna 45°~90° for WiF i/Blue
- Swivel Antenna 45°~90° 433/868MHz
- Flat Antenna for GSM/DCS
- Cling -On for GSM/DCS
- GPS Antenna Active Antenna
- Enterprise GPS/GSM Antenna - GPS/GSM Alternat e Packaged Antennas
Pages B197 – B200
450 MHz CDMA 1900 MHz PCS WCDMA & CDMA2000 Environment Decorations
800 MHz CDMA 1920-2170 MHz WCDMA TD-SCDMA Smart Antennas In-building Antennas
900 MHz GSM 1710-2170 MHz Multi-Band &
UMTS 2.4 GHz WIMAX MIMO
806-960 MHz Broadband 1710-2170 MHz Broadband &
GSM 3.5 GHz WIMAX Beamforming
1800 MHz DCS GSM and CDMA VET 5.7 GHz WIMAX Dual-Band & Tri-Band Series
Product Overview
Cellular Base Station Antennas
Amphenol Antenna Solutions has been supplying base station antennas into the cellular market for nearly 20 years. In that time our product portfolio has grown to serve customers operating in the 700 MHz, Cellular 850 MHz, GSM 900 MHz, IDEN, GSM 1800 MHz, PCS 1900 MHz, UMTS 2100 MHz, AWS and 2500 WiMAX frequency bands.
Amphenol Antenna Solutions offers a broad range of base station antenna models in indoor, point-to-point, sectorized panel and omni directional configurations. Our high performance antennas are field proven by network operators worldwide to deliver reliable communications in harsh tower top environments.
Amphenol Antenna Solutions offers a wide selection of gains, azimuth beamwiths and electrical downtilts to give RF engineers the tools they need for network optimization. Innovative Wideband, Dual-Band and Tri-Band antenna solutions are also available to allow deployment of multiple networks in existing tower space with minimum visual impact to the community.
In addition to antennas, Amphenol Antenna Solutions has established expertise in tri-sector antenna structures, tower top electronics and Remote Electrical Tilt (RET) technology. This depth of experience allows Amphenol Antenna Solutions engineers to develop highly sophisticated site solutions to support challenging network requirements.
To search on-line for Cellular Base Station antennas:
http://www.amphenol-jaybeam.com
Product Overview – Continued
Embedded Amplifier Antennas
Amphenol Antenna Solutions has pioneered the development of embedded amplifier technology for base station antennas. Rather than simply re-packaging an existing Tower Mounted Amplifier (TMA), our engineers were encouraged to reconsider all aspects of the design to insure a solution that provides maximum system performance in the smallest physical size possible.
The resulting design improves RF system performance by minimizing cable losses in front of the TMA. This allows network operators to achieve higher quality of service from their existing sites or larger cell radii for new deployments.

In-Building / Microcell Antennas
Amphenol Antenna Solutions in-building and microcell antennas have been deployed by network operators worldwide to provide improved coverage in office buildings, campuses, tunnels and urban canyons. Our aesthetically pleasing, low profile designs are available in an assortment of directional and omnidirectional configurations giving network engineers the tools needed to optimize coverage in these difficult environments.
Innovative Wideband, Dual-Band and Tri-Band configurations are available allowing one distributed antenna system to serve multiple service providers with minimum visual impact.
To search on-line for In-Building / Microcell antennas:
Tri-Sector Antenna Solutions
Amphenol Antenna Solutions is the industry leader in low visual impact Tri-sector antenna solutions. Since our first Tri-Sector antenna deployment over a decade ago, we have continuously enhanced the product range to support the need for smaller antenna structures with increased functionality.
Amphenol Antenna Solutions understands the unique packaging challenges associated with tri-sector sites and has designed UNICELL and TRIO to provide trouble free installation and easy serviceability. A full line of accessories including TMA mounting canisters, lightning protection kits and flag pole adapter kits are available to allow customization to meet site specific requirements.
UNICELL
Unicells are antenna enclosures designed to conceal a wide variety of “off -the-shelf” Amphenol Antenna Solutions dual polarized antennas. The Unicell product family was designed by a team of RF and mechanical engineers to provide robust mechanical structures with maximum RF performance. Three module diameters are available in an assortment of lengths which can be custom tailored to meet your site requirements. Depending on the antenna selected, features such as azimuth panning & mechanical downtilt can be accommodated. In addition to the modules themselves accessories such as TMA mounting canisters, lightning protection kits, GPS antenna mounting kits, mounting masts and flag pole adapter kits have been developed to enhance the product offering.
Product Features: 3-Sector antenna enclosures 312mm (12-inch), 368mm (14-inch) and 511 mm (20-inch) diameter versions Removable concealment panels Easy field access to antennas Stackable to meet co-location requirements AZ and EL adjustment available in some modules
To search on-line for UNICELL antennas:
TRIO
TRIO antennas are 3-sector base station antennas concealed inside a compact cylindrical shroud. Unlike Unicell structures, the TRIO radiating sub-assemblies are not individually removable. Rather, the antenna for each sector is built directly into the TRIO mechanical structure, creating the smallest possible antenna diameter. The product range includes Wideband, Twin-Wideband, Dual-Band and Tri-Band configurations in diameters ranging from 230mm (9-inch) to 457mm (18-inch.) TRIO antennas are RET capable and selected models are available with azimuth panning. Accessories such as TMA mounting canisters, lightning protection kits and mounting masts are available to enhance the product offering.
Product Features: 3-Sector base station antennas Wideband, Dual-Band and Tri-Band configurations 230mm (9-inch), 310mm (12-inch), 388mm (15-inch) and 457mm (18-inch) diameters Removable connector access panels Independent Remote Electrical Tilt on each sector Independent AZ panning available in some modules
To search on-line for TRIO antennas: http://www.amphenol-jaybeam.com
UHF & VHF Base Station Antennas
Amphenol Antenna Solutions is a leading supplier of professional base station antennas to Private Mobile Radio (PMR), TETRA and broadcast markets worldwide. Applications include public safety, transportation, utilities, government, military, digital radio as well as mobile video broadcast using the DVB-H standard. Amphenol Antenna Solutions is a long standing supplier to these markets and has an excellent reputation for delivering high quality antennas for mission critical applications.
Amphenol Antenna Solutions offers a robust range of antenna models covering the VHF and UHF frequency bands in indoor, Yagi, sector grid, sector panel, discone, collinear, exposed dipole, center-fed dipole and end-fed dipole omni directional configurations. Our high performance antennas are field proven by network operators worldwide to deliver reliable communications in harsh tower top environments.
Amphenol Antenna Solutions offers a full range of robust mounting options as well as an assortment of phasing harnesses to create high gain antennas for long range applications.
Marine Antennas
Amphenol Antenna Solutions has produced high performance Marine antennas for more than 30 years under the MAT Equipment brand covering the AM, FM, HF, CB, TV, VHF, UHF and Cellular frequency bands. Our professional antennas are produced to the highest quality standards in the industry, providing clear, reliable communications that you can trust.
The marine environment is extremely harsh due to constant exposure to wind, sea and pounding waves. Our engineers understand this environment and have developed robust antenna designs using the finest materials and finishes available to insure years of reliable service on the sea.
A wide selection of mounting options and accessories are available to suit your application. Select from our large assortment of high quality mounting brackets, ratcheting bases, RF connector styles and cable lengths to insure quick, easy installation.
To search on-line for Marine antennas:
Remote Electrical Tilt Technology
Amphenol Antenna Solutions has developed a complete range of equipment to provide Remote Electrical Tilt (RET) operation, known as SmartTilt™. Network engineers can make electrical downtilt adjustments in minutes without the need to schedule site outage and without having to pay for an expensive tower climb.
Amphenol Antenna Solutions is proud to be at the forefront of RET Technology and was responsible for gathering the industry together to form the Antenna Interface Standards Group (AISG.) This group has worked together to develop an open communications standard for remote control of basestation antennas and mast head amplifiers. All Amphenol Antenna Solutions SmartTilt™ antennas are compliant with the AISG standard.
Amphenol Antenna Solutions’s Mechanical Electrical Tilt (MET) antennas can be upgraded to remote electrical tilt (RET) antennas with the addition of the appropriate RET unit. Two different RET configurations are available depending on the antenna type and on your specific site requirements:
Internal RET:
Internal, “cassette style” RET’s install inside the antenna structure and are not visible after installation. This style construction often results in a slightly longer antenna, but one with no external features to be damaged during installation or to impede RF connector weatherproofing.
External RET:
External RET’s extend beyond the bottom of the antenna structure and are not typically considered part of the antenna length by zoning officials. With this style RET, 100% of the antenna aperture is dedicated to radiating elements providing higher gain for a given antenna size.
Portable Control Unit
Multiple RET antennas can be daisy chained together and controlled at the base of the tower via a single data feed cable. (See Diagram.) For applications where running the additional control cable is not feasible, Amphenol Antenna Solutions offers an assortment of AISG Modems to inject the control signals onto an existing RF feed cable. Electrical downtilt of antennas can be controlled at the site using a standard laptop computer and a Amphenol Antenna Solutions Portable Control Unit (PCU) kit.
For more information on SmartTilt™ solutions, please contact Jaybeam Wireless sales and customer service.
JAYBEAM
SmartTilt™ Site Configuration
http://www.jaybeamwireless.com/remote-electrical-tilt-technology.php JAYBEAM
Polarization Vertical
Gain 2 dBi
Input power 50 W per band
Termination N socket on 30 cm RG303 cable (light brown jacket)
Mechanical Characteristics
Dimensions Base plate: Ø 18 cm Ø 7.1 in Mini: Ø 7 cm Ø 2.8 in
Weight 0.35 kg 0.8 lbs
Packaging
Packing dimensions LxWxD 25 x 11 x 11 cm 9.8 x 4.3 x 4.3 in
Packing weight 0.7 kg 1.5 lbs
Mounting Options
Mounting 4 x 5 mm (0.16 x 0.20 in) holes in base plate
concealed with 3 removable caps
Horizontal Vertical | 950 MHz Vertical | 1800 MHz Vertical | 1920 MHz Vertical | 2080 MHz
REV0909 www.amphenol-jaybeam.com B-15
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
V-Pol | Omni | 2.0 dBi

Polarization Vertical
Input power 100 W
Input connector type / Location N Female + 30 cm (11.8 in) RG303 cable / Rear
Radome color White
Dimensions (Ø x H) 203 x 71 mm 8.0 x 2.8 in
Weight 0.35 kg 0.8 lbs
Mounting Options
Mounting Screws supplied (3 holes in the base) for ceiling mounting.
Horizontal Vertical | 900 MHz Vertical | 1800 MHz Vertical | 1900 MHz Vertical | 2100 MHz
V-Pol | Omni | 2.0 dBi
B-17
X-Pol | Dual Band VET | 85° | 147./16.0 dBi
880-960 / 1710-2170 MHz
5130100 is a dual band, dual polarized sector panel overing the GSM900/1800/1900 and
UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment
on each band and can be fitted with an optional remote control.
Electrical Characteristics
Polarization ±45° ±45°
Gain 14.7 dBi (±0.5) 16.0 dBi (±0.5)
Electrical downtilt 0-10° 0-10°
Front-to-Back ratio > 24 dB (± 30° at the back)
Null fill Better than 22 dB
IM3 (2x20W carrier) -110 dBm
Isolation between ports < 30 dB
Isolation between bands < 32 dB
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Dimensions HxWxD 2040 x 286 x 138 m m 80.3 x 11.3 x 5.4 in
Weight without brackets 18.5 k g 41 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 665 N 149 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter Weight
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 2.6 kg 5.6 lbs
Kit to add mech. downtilt (0-10°) --- --- ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna

X-Pol | Dual Band VET | 85° | 16.0/16.0 dBi
880-960 / 1710-2170 MHz
5133100 is a full size dual band, dual polarized sector panel covering the
GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical
tilt with manual adjustment on each band and can be fitted with an optional remote control.
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Isolation between ports 0-2° = > 27 dB; 2-10° = > 30 dB
Isolation between bands > 40 dB
Weight without brackets 25 kg 55 lbs
Description: Part number: Fits Pipe Diameter
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in
Kit to add mech. downtilt (0-9.5°) 0900394/00 ---
Wall mount with azimuth pan 0900395/00 ---
Wall mount with mech. tilt & az. pan 0900533/00 ---
base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator. This antenna can be delivered with the RET
units already fitted under part number 5133000.

880-960 / 1710-2170 MHz
Upper sidelobe rejection Better than 18 dB
Isolation between ports 0-2° = > 27 dB; 2-10° = > 30 dB
Isolation between bands > 40 dB
Description: Part number: Fits Pipe Diameter
Kit to add mech. downtilt (0-9.5°) 0900394/00 ---
Wall mount with azimuth pan 0900395/00 ---
Wall mount with mech. tilt & az. pan 0900533/00 ---
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator. This antenna can be delivered with the RET
units already fitted under part number 5133010.

X-Pol | VET Panel | 65° | 19.0 dBi
1710-2170 MHz
5142100 is a 65° sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a
fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and
can be fitted with an optional remote control.
Horizontal Plane Vertical Plane
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Connector(s) 2 ports / 7/16 DIN / Female / “Long Neck” / Bottom
Shroud Fiberglass extrusion, Grey RAL 7035
Description: Part number: Fits pipe diameter: Weight
Kit to add mechanical downtilt --- ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.

Electrical Characteristics (general)
The antenna contains two radiating arrays housed in a single mechanical structure.
Isolation between arrays > 32 dB
Electrical Characteristics of each antenna
Frequency band 1710-2170 MHz
Electrical downtilt 0-10°
Impedance 50
XX-Pol | VET Panel | 65° | 18.5 dBi
1710-2170 MHz
Kit to add mechanical downtilt (0-14°) 0900374/00 ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add addi-
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators for each antenna.
5157100 is a twin 65° sector antenna covering the GSM1800/GSM1900/UMTS frequency
bands. Each antenna has variable electrical tilt capability with manual adjustment and can
be fitted with an optional remote control.

Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face and marked with colored rings.
Wideband 1710-2170 MHz ports WHITE r ings 2 x 7/16 DIN Long Neck
Wideband 1710-2170 MHz ports
Impedance 50
Electrical Downtilt Control
Electrical downtilt can be controlled separately for each internal array.
Manual control: The electrical tilt of each band is changed by tuning the adjustment screw at the end of each
tilt indicator with a 10 mm socket wrench.
Remote control: Optional RET modules (one per internal array), already configured and compatible with
3GPP/AISG2.0 or AISG1.1, allow the remote control of the variable electrical downtilt. The remote control of
other equipment or sectors is possible by “daisy-chain” through the use of an extra AISG connector located on
each RET module.
The RET modules are fully inserted at the bottom of the antenna and do not add any additional length. The tilt
angle indicators always stay visible and each band of the antenna still has manual tilt control (manual override).
The antennas delivered with RET fitted in it (5157120 and 5157120G) include the AISG cable necessary for the daisy chain between the two RET units.
RET module part number
1710-2170 MHz
5157020 Remote Electrical Tilt Antenna (AISG1.1)
5157020G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Double wideband antenna, dual polarized, 4 connectors
Variable electrical tilt, 0-10° on each antenna
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
RET modules fully inserted inside the antenna (field replaceable)

5157120 5157020 5157020G
B-23 www.amphenol-jaybeam.com REV0809
1710-2170 MHz
Environmental
Operating temperature range -40° to +60°C -40° to +140° F
Environmental ETS 300 019
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 k m/hr 99 mph
Shroud Outdoor plastic, grey RAL7035
Packaging
Packing dimensions 2300 x 340 x 210 mm 90.6 x 13.4 x 8.3 in
Packing weight 20.0 kg 44 lbs
Packing volume 0.164 m3 5.8 ft3
Description: Part number: Fits pipe diameter: Weight:
Kit to add mechanical downtilt 0900188/00 --- 1.5 kg 3.3 lbs
Wall mount with azimuth pan 0900183/00 --- 1.6 kg 3.5 lbs
Wall mount with mech. tilt & az. pan 0900885/00 --- 3.3 kg 7.3 lbs
Installation
Do not install the antenna with the connectors facing upwards.
Bottom View
Tilt angle indicators
880-960 / 1710-2170 MHz
Electrical Characteristics 880-960 MHz 1710-2170 MHz
Frequency bands 880-960 MHz 1710-1880 MHz 1850-1990 MHz 1920-2170 MHz
Gain 17.5 dBi 17.3 dBi 17.7 dBi 18.2 dBi
Null fill 18 dB typical
Isolation between ports Tilt 0-2° > 28 dB Tilt 2-10° > 30 dB
Isolation between bands 35 dB typical
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.8 kg 13 lbs

5162100
1710-2170 MHz
Kit to add mechanical downtilt (0-14°) --- ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.

X-Pol | VET TRIO | 65° | 18.5 dBi
1710-2170 MHz
5162603 Remote Electrical Tilt
TRIO230 (120° fixed azimuth)
Three 65° wideband antennas installed at 120° in a cylindrical shroud
MET and RET versions available
Manual units can be upgraded with RET control
A built-in canister at the bottom allows access to connectors and tilt control
A remote controlled antenna still has manual control capability with a visible tilt indicator
Impedance 50
VSWR < 1.5:1
Connector(s) 6 ports / 7/16 DIN / Female / Long Neck / Bottom
Overall Dimensions Height x Diameter 1940 x 230 mm 76.4 x 9.1 in
Antenna Height 1565 mm 61.6 in
Access Panel Height x Diameter 250 x 230 mm 9.8 x 9.1 in
Weight 27 kg 60 lbs
Wind speed - Survival 200 km/hr 124 mph
Wind speed - Operational 160 k m/hr 100 mph
Shroud / Housing Outdoor plastic, Grey RAL7035 / Aluminum
Installation
Any base allowing a 230 mm (9.1 in) diameter flat surface. The antenna must be bolted with six M10 screws 120° apart
in a 180 mm (7.1 in) diameter construction circle.
Accessosries
With Individual Azimuth Panning (±15°)
1710-2170 MHz
TRIO310 (±15° individual azimuth panning)
A remote controlled antenna still has manual control capability with a visible tilt indicator
Impedance 50
VSWR < 1.4:1
Weight 37 kg 82 lbs
Installation
Accessosries
870-960 / 1710-2170 MHz
5163100 is a 3/4 dual band, dual polarized sector panel covering the GSM900/1800/1900
and UMTS frequency bands. The antenna features variable electrical tilt with manual adjust-
ment on each band and can be fitted with an optional remote control.
Gain 16.5 dBi (±0.5) 17.5 dBi (±0.5)
Isolation between ports < 30 dB
Isolation between bands < 32 dB

Gain 15.0 dBi (±0.4) 16.5 dBi (±0.4)
still has the manual control capability and the tilt angle indicator.
870-960 / 1710-2170 MHz
5165110 is a half size dual band, dual polarized sector panel covering the

5176100
1710-2170 MHz
Mounting bracket kit 0900503/00 70-150 mm 2.8-5.9 in ---
Wall mounting kit with azimuth pan 0900408/00 --- ---
Kit to add mechanical downtilt 0900474/00 --- ---
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators.

1710-2170 MHz
Impedance 50
VSWR < 1.4:1
Weight 25 kg 55 lbs
Installation
Accessosries

With Individual Azimuth Panning (±15°)
1710-2170 MHz
Impedance 50
VSWR < 1.4:1
Weight 32 kg 71 lbs
Installation
Accessosries
TRIO310 (±15° individual azimuth panning)
A built-in canister at the bottom allows access to connectors, tilt control and azimuth control

The antenna has four connectors located at the bottom face and marked with colored rings.
Wideband 1710-2170 MHz ports WHITE r ings 2 x 7/16 DIN Long Neck
Wideband 1710-2170 MHz ports
Impedance 50
Electrical downtilt can be controlled separately for each internal array.
Manual control: The electrical tilt of each band is changed by tuning the adjustment screw at the end of each
tilt indicator with a 10 mm socket wrench.
Remote control: Optional RET modules (one per internal array), already configured and compatible with
3GPP/AISG2.0 or AISG1.1, allow the remote control of the variable electrical downtilt. The remote control of
other equipment or sectors is possible by “daisy-chain” through the use of an extra AISG connector located on
each RET module.
The RET modules are fully inserted at the bottom of the antenna and do not add any additional length. The tilt
angle indicators always stay visible and each band of the antenna still has manual tilt control (manual override).
The antennas delivered with RET fitted in it (5177000 and 5177000G) include the AISG cable necessary for the daisy chain between the two RET units.
RET module part number
1710-2170 MHz
Double wideband antenna, dual polarized, 4 connectors
Variable electrical tilt, 2-14° on each antenna

5177100 5177000 5177000G
1710-2170 MHz
Environmental
Packaging
Packing weight 20.0 kg 44 lbs
Kit to add mechanical downtilt 0900188/00 --- 1.5 kg 3.3 lbs
Installation
Bottom View
Tilt angle indicators
XX-Pol | VET TRIO | 65° | 17.5/17.5 dBi
1710-2170 MHz
Impedance 50
VSWR < 1.4:1
Isolation between antennas in a sector > 32 dB
Weight 53 kg 117 lbs
Installation
Accessosries
Three 65° TWIN wideband antennas installed at 120° in a cylindrical shroud

1710-2170 MHz
5257100 is a twin 65° sector antenna covering the GSM1800/GSM1900/UMTS frequency
bands. Each antenna has variable electrical tilt capability with manual adjustment and can
be fitted with an optional remote control.
P a t t e r
n A v a i l
a b l e
S o o n
a b l e
S o o n
Impedance 50
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators for each antenna.
X-Pol | Dual Band VET Antenna | 65° | 17.0 dBi
880-960 / 1710-2170 MHz
Gain 15.0 dBi 16.0 dBi 17.0 dBi
Upper sidelobe 16 dB typical 16 dB typical
Front-to-Back ratio > 20 dB > 29 dB
Isolation > 25 dB > 25 dB
Maximum power per port 200 W 160 W
Connector(s) 4 ports / 7/16-DIN / Female / Bottom
Dimensions HxWxD 2400 x 236 x 130 mm 94.5 x 9.3 x 5.1 in
Overall dimensions to base of
TMA mounting HxWxD
2920 x 236 x 130 mm 115.0 x 9.3 x 5.1 in
Weight - 2400 mm 19.5 kg 43 lbs
Weight - 2920 mm 21.5 kg 47 lbs
Wind load - 2400 mm 800 N 180 lbf
Wind load - 2920 mm 900 N 202 lbf
Colour Grey RAL 7035
Mounting Part number: Weight:
2920 mm shown in photo

880-960 MHz
This 3/4 panel is designed for use on the GSM900 band and is offered with variable electri-
cal tilt. The new curved shape of the shroud offers both improved appearance and reduce
windload.
Wind load @ 160 km/hr (100 mph) Front:610, Side:355, Rear:860N Front:137, Side:80, Rear:193 lbf
Connector(s) 2 ports / 7/16 DIN / Female / Bottom
Shroud / Housing Outdoor plastic / aluminum
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not

Impedance 50
Connector(s) 2 Ports / 7/16-DIN Long Neck / Female / Bottom
Manual control: The electrical tilt is changed by turning the adjustment screw at the end of the tilt indicator with
a 10 mm socket wrench.
Remote control: An optional RET module, already configured and compatible with 3GPP/AISG2.0 or AISG1.1,
allows the remote control of the variable electrical downtilt. This module is fully inserted at the bottom of the
antenna and does not add any additional length. The remote control of other equipment or sectors is possible by “daisy-chain” through the use of an extra AISG connector located on the RET module.
The tilt angle indicator always stays visible and the antenna still has manual tilt control (manual override).
RET module part number RETU-CA11
RETU-CG11
880-960 MHz
Single band antenna, dual polarization, 2 connectors
Wide range of electrical tilt, variable 0°-10°

5265102 5265002 5265002G
880-960 MHz
Environmental
Weight without brackets 17 k g 37.5 lbs
Wind load @ 160 km/hr (100 mph) Front: 819 N Side: 480 N Back: 1160N Front: 184 lbf Side: 108 lbf Back: 261 lbf
Packaging
Packing dimensions 2930 x 330 x 210 mm 115.3 x 13 x 8.3 in
Packing weight 26 kg 57.3 lbs
Kit to add mechanical downtilt (0-10°) 0900394/00 --- 3.1 kg 6.8 lbs
Installation
Always use the three mounting points to install the antenna.
Bottom View
5270200 5270303 5270306
X-Pol | Dual Band VET TRIO | 65° | 15.0/17.0 dBi
880-960 / 1710-2170 MHz
Model number options:
5270200 Manual Electrical Tilt Antenna
5270303 Manual Electrical Tilt for GSM Band, Remote Electrical Tilt f or Wideband
5270306 Remote Electrical Tilt Antenna for both bands
Tri-sector, “monopole” dual band antenna, 12 connectors
Independent tilt on each band 0-10° / 0-10°
MET and RET versions
Flag pole kit available
Horizontal beamwidth 70° 68° 65°
Vertical beamwidth 9.5° 6.5° 5.5°
Gain 12.9 dBd / 15.0 dBi 13.9 dBd / 16.0 dBi 14.9 dBd / 17.0 dBi
Upper sidelobes < -16 dB typical
In-band isolation > 25 dB
Inter-band isolation > 30 dB
Connector(s) 12 ports / 7/16-DIN / Female / Bottom
RET Type / Part Number 5270303: RET-CD71; 5270306: RETU-DCA71
Weight 70 kg 154 lbs
Color RAL 7035 Grey
Item: Description: Part Number:
Adapter plate Adapter plate to provide six M10 x 1.5 tapped holes on
240 mm (9.4 in) bolt circle
3902908/68
5270200 5270303 5270306
880-960 / 1710-2170 MHz
880-960 MHz
-90
-60-120
-90
-60-120
-90
-60-120
-90
-60-120
-90
-60-120
30 25 20 15 51035
-90
-60-120
-90
-60-120
-90
-60-120
-90
-60-120
-90
-60-120
-90
-60-120
-90
-60-120
3 0 2 5 2 0 15 51035
-90
-60-120
-90
-60-120
Input power 200 W (each port)
Connector(s) 2 Ports / 7/16-DIN / Female / Bottom
Mounting Options Part Number Fits Pipe Diameter
Kit to add mech. downtilt (0-10°) ---
still has the manual control capability and the tilt angle indicator.
880-960 MHz
The antenna has four connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (BLUE rings) 1710-2170 MHz ports 2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1920-2170 MHz
Polarization ±45° ±45° ±45°
Gain
mid tilt 14.5 ± 0.5 dBi 16.3 ± 0.5 dBi 16.7 ± 0.5 dBi
Electrical downtilt 0-14° 0-12° 0-12°
Impedance 50 50 50
VSWR < 1.5 < 1.5 < 1.5
Upper sidelobe rejection 15 dB typical 15 dB typical 15 dB typical
Front-to-Back ratio > 22 dB > 25 dB > 25 dB
Isolation between ports > 25 dB > 25 dB > 25 dB
Isolation between bands > 35 dB > 35 dB > 35 dB
IM3 (2x20W carrier) < -110 dBm < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W 160 W
Electrical downtilt can be controlled separately for low band (RED) and high band (BLUE). The tilt indicators are covered
by a removable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color
is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise.
It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 Compliant to AISG1.1 (one unit included with 5829001)
MDCU-G0002 Compliant to 3GPP/AISG2.0 (one unit included with 5829001G)
P R E L I M I N A R Y
XX-Pol | VET Panel | 65° | 15.0 /17.2 dBi
880-960 / 1710-2170 MHz
Model number options:
Dual band antenna, 4 connectors
Slimline profile for low wind load
Single RET module to control all tilt angles

5829101 5829001 5829001G
880-960 / 1710-2170 MHz
Environmental
Weight without brackets 17 k g 37.5 lbs
Wind load @ 160 km/hr (100 mph) Front: 330 N Front: 74.2 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035
Installation
Always attach antenna by the three mounting points. Do not install with the connectors facing upward.
Bottom View
transparent cap. Manual ad-
moving the cap. Knob color is
same as connectors.
be in place.
RET control

5860100 5860000 5860000G
880-960 / 1710-2170 MHz
Gain
Isolation between ports > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm
Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a re-
movable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob
color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter
clockwise. It is re-installed by opposite rotation.
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
RET module part number MDCU-A0001 Compliant to AISG1.1
MDCU-G0001 Compliant to 3GPP/AISG2.0

5860100 5860000 5860000G
880-960 / 1710-2170 MHz
Environmental
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front:130, Side:108, Rear 205 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing weight 33 kg 73 lbs
Kit to add mech. downtilt (0-10°) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install antenna with the connectors facing upward.
Bottom View
same as connectors.
be in place.
RET control
5860110 5860010 5860010G
X-Pol | Dual Band VET Diplexed | 65° | 17.3/17.8 dBi
880-960 / 1710-2170 MHz
The antenna has two connectors located at the bottom face, marked with colored rings.
High Band (BLUE rings) 1710-2170 MHz ports
Gain
Dual band antenna with internal diplexer, 2 connectors

5860110 5860010 5860010G
880-960 / 1710-2170 MHz
Environmental
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front:130, Side:108, Rear 205 lbf
Packaging
Kit to add mech. downtilt (0-10°) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install antenna with the connectors facing upward.
Bottom View
same as connectors.
be in place.
RET control
5863100 5863000 5863000G
880-960 / 1710-2170 MHz
Gain

5863100 5863000 5863000G
880-960 / 1710-2170 MHz
Environmental
Wind load @ 160 km/hr (100 mph) Front: 413, Side: 347, Rear: 649 N Front: 93, Side: 78, Rear: 146 lbf
Packaging
Kit to add mech. downtilt (0-10°) 0900188/00 --- 1.5 kg 3.3 lbs
Installation
Bottom View
same as connectors.
be in place.
RET control
5863903 5863803 5863803G
REV0809 www.amphenolantennas.com B-52
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Impr

Documents

21.Amphenol Jaybeam Product Catalogue - Europe, Africa and Middle East