2216 FX/3016 FXSpecifications 2216 FX/3016 FXGeneral

CONSTRUCTION Cast Iron

AXIS SLIDE TYPE Box Way X/Y/Z Axes

FLOOR TO TABLE SURFACE 31” (787 mm)

MACHINE WEIGHT2216 - 8,300 lbs. (3,765 kg) 3016 - 8,550 lbs. (3,878 kg)

Table

TABLE SIZE 39” x 16” (990 x 406 mm)

T-SLOTS (NO. x WIDTH x SPAN) 3 x .709” x 4.33” (18 mm x 110 mm)

CUTTING TRAVEL RATE (X/Y/Z) 0 - 800 ipm max (20 m/min max)

RAPID TRAVEL RATE 1,000 ipm X/Y/Z (25.4 m/min)

MAX. WEIGHT ON TABLE 2,006 lbc (910 kgc)

BALL SCREW SIZE 32 mm dia. Double Supported

LONGITUDINAL (X AXIS) 22” (559 mm)-2216 30” (762 mm)-3016

CROSS (Y AXIS) 16” (406 mm)

VERTICAL (Z AXIS) 20”/Opt 28” (508/Opt 711 mm)

SPINDLE NOSE TO TABLE 4”-24”/Opt 32” (102-610/Opt 813 mm)

SPINDLE CENTER TO COLUMN WAYS 16” (406 mm)

AccuracyAXIS POSITIONING** ± .0002” (± .005 mm)

AXIS REPEATABILITY** ± .0001” (± .0025 mm)

Spindle

POWER TRANSFER Vector Drive (1:1)

SPINDLE SPEED 10-8,000 RPM

SPINDLE ORIENTATION Electromechanical

SPINDLE TAPER No. 40

ATC, NUMBER OF TOOLS 21

TOOL SELECTION Random/Bi-directional

MAX. TOOL DIAMETER 3” (76 mm)

WITHOUT ADJACENT TOOLS 4.5” (114 mm)

MAX. TOOL LENGTH 15” (381 mm)

MAX. TOOL WEIGHT 15 lbs. (7 kg)

Motor SPINDLE DRIVE MOTOR AC, VECTOR Drive

HORSE POWER15 HP (11 kW) Continuous22 HP* (16.5 kW) Peak

TORQUE* 78 ft-lbs* (105 Nm)*

AXIS DRIVE MOTOR (X/Y) AC, 1,730 lbs* (7,700 N)* Thrust

AXIS DRIVE MOTOR (Z) AC, 3,260 lbs* (14,500 N)* Thrust

Miscellaneous

AIR PRESSURE REQUIREMENT80-120 PSI (5.5 - 8 Bar)15 SCFM (0.42 m3/min) Momentary

THREE PHASE POWER REQUIREMENTS 75 A, 240 VAC

Check us out online atwww.fadal-fx.com

ADV-0270 0806

Superior Components:

Cast Iron Box Way Construction– Integral flame hardened ways– Large surface area contact– Dampens vibration

Steinmeyer ETA+ Dual Mounted Ball Screws– Virtual elimination of reversal error– Increased stiffness– Low friction

GE Fanuc Fadal 0i-MC Control– Industry standard CNC control– Operator friendly graphic display – Easy to operate, program and troubleshoot

Options:

Manual Guide i– Guidance message – Intuitive menu selections – Easy programming

AI Contour Control– “Look Ahead” compatibility– Machining trajectory error significantly reduced

GE Fanuc Fadal 0i-MC Control

20701 Plummer StreetChatsworth, CA 91311