For more information: www.ddc-web.com/RP-2016

28V, 238A, 16-Channel SSPCPower Distribution UnitProduct Brief

© 2010 Data Device Corporation. All trademarks are the property of their respective owners.

Connectivity Power Control

Model: RP-20161XXXC/D1

Printed on recycled paper.

800,000+SSPC NODESINSTALLED SINCE 1988

DDC's 16-channel solid state power controller (SSPC) power distribution unit controls, protects, and continuously monitors up to 238A to 16 independent electrical system loads, in a ruggedized military-grade form factor.

Applications•Military Land Vehicles•Commercial Trucks• Industrial Controls

•Military/Commercial Ships•Weapon Systems•Unmanned Vehicles

Key FeaturesPerformance•Measurement Accuracy better than 5%•Total Module Current Capability of 238 Amps•Nominal 28V Operation, MIL-STD-1275D, MIL-STD-704,

Def Stan 61-5 Compliant•Controlled Rise/Fall Times•Monitoring

- Load Currents - Input Voltage - Channel Output Voltages - On-board and External Temperatures

•Low Power ‘SHUTDOWN’ Mode Input

Functionality•16 Independent Load Channels• Instant Trip and I²t Protection / Thermal Memory•Continuous Built-In Test (BIT)•Trip Override (Battle) Mode•Discrete Control Options

- Discrete Control Interface (DCI) - Trip Status Output (TSO) - Reset-All-Trip Input (RAT) - Auxiliary Channel Reset - Discrete Channel On/Off Control

•SAE J1939 compatible CAN Interface - SAE J1939 Compatible CANbus Interface (250K,

500K, 1MBaud) - Serial RS-485 and Discrete Control Options

Programmability•8A, 10A and 25A Channels with 10:1 Programmability•Channel Paralleling for High Current Loads

Environmental•MIL-STD-810 Compliance for Shock, Vibration etc.•MIL-STD-461 Compliance for EMI/EMC • IP-67 Rated Ingress Protection•Ruggedized Conduction Cooled Form Factor

Benefits•High Reliability

- 25x Improvement in MTBF, Compared with Mechanical Switches, Breakers, and Relays

- Very Rapid Short Circuit Deactivation Protects Wires, Loads, and SSPCs

- Improved Mission Safety and Longevity•Greater System Protection

- I²T Overload Protection Avoids Nuisance Trips - Controlled Rise/Fall Time for EMI Reduction, Reduced

Inrush Currents, and Reduced Inductive Transients during Turn-Off

- Provides Prognostics/Diagnostics Data - Enables Preventive and Automated Maintenance - Power Profiling and Analysis

•More Efficiency - 7x Improvment in Volume Density, 5x Improvement in

Weight Density, Compared with Mechanical Switches, Breakers, and Relays

- Low Power Dissipation - Crew Off-loading - Energy Savings Through Load Shedding and Load

Prioritization - Programmability Allows for Increase in Up-time and

Mission Readiness•Cost Savings:

- Weight and Integration Savings - Programmability Allows for Minimum Inventory - Minimized Maintenance and Support - Field Upgradability Provides Protection from

Obsolescence

2Data Device Corporation www.ddc-web.com

PB-RP-20161-512/16

The information in this Flyer is believed to be accurate; however, no responsibility is assumed by Data Device Corporation for its use, and no license or rights are granted by implication or otherwise in connection therewith. Specifications are subject to change without notice.

DATA DEVICE CORPORATIONREGISTERED TO:

ISO 9001:2008, AS9100C:2009-01EN9100:2009, JIS Q9100:2009

FILE NO. 10001296 ASH09

RE

GIS T E R E D F

IRM

®U

For ordering assistance and technical support, E-Mail: service@ddc-web.comVisit: ddc-web.comCall: HQ, N.Y., U.S.A 1-800-DDC-5757 | (631) 567-5600

UK +44-(0)1635-811140France +33-(0)1-41-16-3424Germany +49-(0)89-1500-12-11Japan +81-(0)3-3814-7688Asia +65-6489-4801India +91 080 301 10 200

Ordering InformationTechnical DrawingsRP-20161XX1X1-2C0 Processing Requirements: 0 = Standard DDC Processing Cooling Methods/Ruggedness: C= Conduction Cooled Operating Temperature Range (at Thermal Interface): 2 = Industrial, -40ºC to +85ºC Connector: C= MIL-DTL-38999 Connectors D = "D" Connectors S = Stud Connectors Communication Interface 1 = CAN Bus, 250K Baud/s, Programmable 5 = RS-485 Interface, Programmable F = CAN Bus, Programmable (note 1) Pass-Through: 0 = None 1 = Power Return Pass-Through Ingress Protection Rating: 0 = None 7 = IP67 Card Stack Height: 1 = 1 Card (16 Channels) Number of RPC Channels per Board: 16= 16 Channels Base Module Type: RP-20 = RPC Module

Notes: 1. Legacy Command Interface, Not for New Designs 2. Contact Factory for External Temperature Sense Option

Block Diagram

LOGIC CONTROLCOM PORT

Power Bus Input

+28VDC

A

DRIVE DRIVE MONITOR MONITOR

On Board Temp Monitor

B

Power Switch 0

Sense Circuit

CH 0

Power Switch 15

Sense Circuit

CH 15

DISCRETE (DCI)

HW BATTLE OVERRIDE C

Optional Ext Temp Monitors

AB

Bus orNetworkInterface

DC-to-DC Converter(option)

SHUTDOWN

TSO RAT

RP-20161XXXC1

RP-20161XXXD1

2.61[66.3]

3.20[81.3]

3.20[81.3]

2.62[66.5]

0

1.01 [25.7]

1.06 [26.9]

1.99 [50.5]

1.10 [27.9]

1.66 [42.3]

2x .45[11.4]

10.73[272.5]

J 1

17

J 2

2 areas.

A1A8

A7A1

1A8A1

Thermal interfaces

J 3

2x 1.58 [40.1]

.98[24.9]

.19[4.8]

10-32 ChassisStud, .50" MIN.

1.67 [42.4]

1.10 [27.9]6x .28 THRU

.50 .38

6x 3/16 Jackposts with

4-40 UNC-2B .10

1.78[45.2]

4.19 [106.4] Note: All Dimensions are in inches [mm]

Data Device Corporation

Need a Custom Solution?DDC can customize designs for all products, ranging from simple modifications of standard products to fully customized solutions for commercial, military, aerospace, and industrial applications.