BATTERY,DRY,DEKA,908DY 4 20 TANK,FUEL,500GAL,DOUBLE WALL 1 19 JOCKEY PUMP CONTROLLER 1 18 CNTR,DIESEL,FIRE,FTA1100-1100J 1 17 ENGINE,DIESEL,CLARKE,JX6H-UF,Tier3 1 16 PUMP, JOCKEY 1 15 VALVE,BFLY,ANVIL,7722,EPDM,GEAR,8 2 14 FLOWMETER,GROOVED,GERAND K-3000-8 1 13 VALVE,AIR RELEASE,175PSI,15A,.5 2 12 VALVE,CLA-VAL,2050B-4KG1,CL150,8 1 11 WASTE CONE,C.S.,8X12,CL150,CLOSED 1 10 VALVE, BUTTERFLY, WAFER, NIBCO, WD3510-8, 12" 1 9 VALVE,CHECK,NIBCO,KW-900-W,12 1 8 GAUGE,3.5,SS,0.25, DISCHARGE 1 7 PUMP,8100,CL150,12x10x18F,CW 1 6 GAUGE,3.5,316SS ,.25LM 30-0-30 GLY, SUCTION 1 5 VALVE,GATE,OSY,NIBCO,F-607-RW,12 1 4 SHACKLE 5 TON 4 3 LIFTING PLATE FOR 8" CHANNEL 4 2 SKID 1 1 BOM DESCRIPTION QTY SYM THIS DRAWING AND THE INFORMATION DEPICTED THEREIN IS THE PROPERTY OF XYLEM. COPIES ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE REPRODUCED OR COPIED, OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PRIOR WRITTEN PERMISSION OF XYLEM. 1 /1 10/7/2011 M. HERNANDEZ I.CETINKAYA FDRH-3000-2-S 8/29/2011 SIZE DRAWING NAME: B REV DRAWING #: CHK: DATE: DRN: DATE: SHEET : 10661 NEWKIRK STREET DALLAS, TX 75220 800.786.7480 3000 GPM_STANDARD_DRAWING NOT FOR CONSTRUCTION 208.00 143.00 .00 .00 28.00 208.00 .00 .00 109.85 62.50 FUEL PUMP 64.50 1 2 3 25.00 184.00 1.00 TYP. 69.88 104.06 207.06 1.00 TYP. 25.81 71.50 142.00 TYP. 4 5 6 7 8 14 9 13 12 11 10 C B A 19 20 16 15 17 18 42.00 CLEARENCE PER NOTE #4 42.00 CLEARENCE PER NOTE #4 42.00 CLEARENCE PER NOTE #4 NOTES: 1. CUSTOMER PIPING MUST BE SUPPORTED NEAR ALL INTERFACE CONNECTIONS TO ELIMINATE STRAIN. 2. ALL PIPING SUPPORTS ARE NOT SHOWN FOR CLARITY PURPOSES. 3. ALL POLYMERIC DRAIN LINE PIPING TO THIS LOCATION. 4. MINIMUM CLEARANCE TO ANY OBSTRUCTION REQUIRED BY THE NATIONAL ELECTRIC CODE. 5. SHIPPING DIMENSIONS: 208"L x 143"W x 112"H. 6. ESTIMATED SHIPPING WEIGHT: 18,000 LBS, ESTIMATED OPERATING WEIGHT: 20,600 LBS. 7. CONDUIT AND SMALL PIPING RUNS TO FOLLOW STRUCTURAL MEMBERS, WHERE POSSIBLE, TO AVOID CREATING TRIP HAZARDS. 8. TO ACHIEVE THE PROPER BUILDING FOUNDATION DESIGN, AN ENGINEER SHALL BE RETAINED WHO IS FAMILIAR WITH LOCAL BUILDING CODES, SOIL CONDITIONS, AND ANCHORING REQUIREMENTS. 9. BASE PLATE SETTING PRIOR TO PIPING: GROUTING PROCEDURES AND FINAL ALIGNMENT MUST BE IN ACCORDANCE WITH THE XYLEM A-C FIRE PUMP INSTRUCTION MANUAL. 10. INSTALL CHECK VALVE WITH HINGE PINS IN THE VERTICAL POSITION. 11. PRESSURE SENSING LINE DRAINS TO BE PIPED TO THE SKID DRAIN MANIFOLD. ITEMS TO SHIP LOOSE: MUFFLER. METERING AND PRESSURE GAUGES. ANY TANK PIPING THAT EXCEEDS THE MAXIMUM SHIPPING HEIGHT. CUSTOMER INTERFACE CONNECTIONS: A. SUCTION: FLANGED, 12", CLASS 150#. B. DISCHARGE: FLANGED, 12", CLASS 150#. C. RELIEF VALVE DISCHARGE: 12", CLASS 150#, RF. PAINT SPECIFICATIONS: PAINT PER XYLEM FLOWTRONEX SPEC FPP-002.

3000 Gpm Diesel

Download PDF Report

Upload
apvillalobos
View
69
Download
1

Tags:

Embed Size (px)

DESCRIPTION

catalogo bomba sistema contra incendio

Citation preview

BOM

DESCRIPTIONQTYSYM

THIS DRAWING AND THE INFORMATION DEPICTED THEREIN IS THE PROPERTY OF XYLEM. COPIES ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE REPRODUCED OR COPIED, OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PRIOR WRITTEN PERMISSION OF XYLEM. 1 /1

10/7/2011 M. HERNANDEZ

I.CETINKAYA

FDRH-3000-2-S

8/29/2011

SIZE

DRAWING NAME:

B REV

DRAWING #:

CHK:

DATE:DRN:

DATE:

SHEET :

10661 NEWKIRK STREETDALLAS, TX 75220

800.786.7480

3000 GPM_STANDARD_DRAWING

NOT FOR CONSTRUCTION

208.00

143.00

.00

28.00

208.00

.00

109.85

62.50FUELPUMP

64.50

1 2325.00184.00

1.00TYP.

69.88104.06207.06

1.00TYP.

25.81

71.50

142.00TYP.

4 5 6 7 8 14 9

13 12

11 10C

19 20 16 15 17

42.00CLEARENCEPER NOTE #4

NOTES:1. CUSTOMER PIPING MUST BE SUPPORTED NEAR ALL INTERFACE CONNECTIONS TO ELIMINATE STRAIN.2. ALL PIPING SUPPORTS ARE NOT SHOWN FOR CLARITY PURPOSES.3. ALL POLYMERIC DRAIN LINE PIPING TO THIS LOCATION.4. MINIMUM CLEARANCE TO ANY OBSTRUCTION REQUIRED BY THE NATIONAL ELECTRIC CODE.5. SHIPPING DIMENSIONS: 208"L x 143"W x 112"H.6. ESTIMATED SHIPPING WEIGHT: 18,000 LBS, ESTIMATED OPERATING WEIGHT: 20,600 LBS.7. CONDUIT AND SMALL PIPING RUNS TO FOLLOW STRUCTURAL MEMBERS, WHERE POSSIBLE, TO AVOID CREATING TRIP HAZARDS.8. TO ACHIEVE THE PROPER BUILDING FOUNDATION DESIGN, AN ENGINEER SHALL BE RETAINED WHO IS FAMILIAR WITH LOCAL BUILDING CODES, SOIL CONDITIONS, AND ANCHORING REQUIREMENTS.9. BASE PLATE SETTING PRIOR TO PIPING: GROUTING PROCEDURES AND FINAL ALIGNMENT MUST BE IN ACCORDANCE WITH THE XYLEM A-C FIRE PUMP INSTRUCTION MANUAL.10. INSTALL CHECK VALVE WITH HINGE PINS IN THE VERTICAL POSITION.11. PRESSURE SENSING LINE DRAINS TO BE PIPED TO THE SKID DRAIN MANIFOLD. ITEMS TO SHIP LOOSE: MUFFLER.METERING AND PRESSURE GAUGES.ANY TANK PIPING THAT EXCEEDS THE MAXIMUM SHIPPING HEIGHT. CUSTOMER INTERFACE CONNECTIONS:A. SUCTION: FLANGED, 12", CLASS 150#.B. DISCHARGE: FLANGED, 12", CLASS 150#.C. RELIEF VALVE DISCHARGE: 12", CLASS 150#, RF. PAINT SPECIFICATIONS:PAINT PER XYLEM FLOWTRONEX SPEC FPP-002.

Mauricio.Hernandez-2

Text Box