Visual PLC 5.7" display, EtherNet/IP™ - VT250 serie (Economy) VT250-57C-L7-IPM Edition • 2017-06-25T16:36:46+02:00 1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com Type designation VT250-57C-L7-IPM Ident no. 6828017 Function PLC with integrated touch display Display / Touch Display TFT LCD colour display Touch Resistive Active screen area 5.7'' (approx. 118 * 89 mm) Resolution (pixels) 320 × 240 (240 * 320 with edgewise design) Number of usable colours 65536 colours Controller Processor ARM9, 32 bit, 200 MHz Program and data memory 4 MB (CoDeSys and QViS) Remanent memory 16 kB SDRAM Add-on memory 1 x SD/MMC memory card Real time clock yes Operating system rcX Programming CODESYS V.3 Interfaces Ethernet Double (integrated switch) Protocols EtherNet/IP™ (Scanner/Master) Modbus RTU (Master/Slave) USB Device Serial RS232 / RS485 Power supply Rated value 24 VDC reverse-polarity protected, 0.35 A maximum Admissible voltage range 20.4…28.8VDC General data Operating ambient conditions 0…50 °C, 10…90 % relative humidity, non-condens- ing Storage ambient conditions -20…60 °C, 10…95 % relative humidity, non-con- densing Approvals CE, cULus Protection class IP65 front IP20 rear Dimensions Front (W x H x D) 212x156x50mm Cut-out (W x H) 198x142mm Weight approx. 0.7 kg ■ TFT LCD color display ■ 5.7", 320 × 240 pixels, 65 K colors ■ Resistive Touch ■ 2 x RJ45 real-time Ethernet interface ■ Serial interface RS232/485 and USB device ■ EtherNet/IP™ master ■ Programmable with CODESYS V3 acc.to IEC 61131-3 ■ 32 Bit RISC processor 200 MHz ■ 4 MB program and data memory (CODESYS and QViS project files) ■ 16 kB non-volatile memory ■ SD/MMC memory card ■ Protection class IP65, front face The HMI touch panel with a 5.7“ TFT display can be used both as operator and control terminal. The control software applied is CoDeSys V3 and approved according to the international standard IEC 61131-3. QViS is the software used for visualization and especially developed for embedded systems. The exchange of variables between control unit and visualization is implemented via interface. The HMI panel is equipped with all rele- vant RT Ethernet and fieldbus systems.

32 Bit RISC processor 200 MHz IEC 61131-3 Programmable with CODESYS V3 … · 2017. 7. 3. · Programmable with CODESYS V3 acc.to IEC 61131-3 32 Bit RISC processor 200 MHz 4 MB program

Download PDF Report

Upload
others
View
25
Download
0

Embed Size (px)

Citation preview

Page 1: 32 Bit RISC processor 200 MHz IEC 61131-3 Programmable with CODESYS V3 … · 2017. 7. 3. · Programmable with CODESYS V3 acc.to IEC 61131-3 32 Bit RISC processor 200 MHz 4 MB program

Visual PLC5.7" display, EtherNet/IP™ - VT250 serie (Economy)VT250-57C-L7-IPM

Edi

tion

• 201

7-06

-25T

16:3

6:46

+02:

1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Type designation VT250-57C-L7-IPMIdent no. 6828017

Function PLC with integrated touch display

Display / TouchDisplay TFT LCD colour displayTouch ResistiveActive screen area 5.7'' (approx. 118 * 89 mm)Resolution (pixels) 320 × 240 (240 * 320 with edgewise design)Number of usable colours 65536 colours

ControllerProcessor ARM9, 32 bit, 200 MHzProgram and data memory 4 MB (CoDeSys and QViS)Remanent memory 16 kB SDRAMAdd-on memory 1 x SD/MMC memory cardReal time clock yesOperating system rcX

Programming CODESYS V.3

InterfacesEthernet Double (integrated switch)Protocols EtherNet/IP™ (Scanner/Master)

Modbus RTU (Master/Slave)USB DeviceSerial RS232 / RS485

Power supplyRated value 24 VDC reverse-polarity protected, 0.35 A maximumAdmissible voltage range 20.4…28.8VDC

General dataOperating ambient conditions 0…50 °C, 10…90 % relative humidity, non-condens-

ingStorage ambient conditions -20…60 °C, 10…95 % relative humidity, non-con-

densingApprovals CE, cULusProtection class IP65 front

IP20 rear

DimensionsFront (W x H x D) 212x156x50mmCut-out (W x H) 198x142mmWeight approx. 0.7 kg

■ TFT LCD color display

■ 5.7", 320 × 240 pixels, 65 K colors

■ Resistive Touch

■ 2 x RJ45 real-time Ethernet interface

■ Serial interface RS232/485 and USB de-vice

■ EtherNet/IP™ master

■ Programmable with CODESYS V3 acc.toIEC 61131-3

■ 32 Bit RISC processor 200 MHz

■ 4 MB program and data memory(CODESYS and QViS project files)

■ 16 kB non-volatile memory

■ SD/MMC memory card

■ Protection class IP65, front face

The HMI touch panel with a 5.7“ TFT displaycan be used both as operator and control ter-minal. The control software applied is CoDeSys V3and approved according to the internationalstandard IEC 61131-3. QViS is the software used for visualizationand especially developed for embedded sys-tems.

The exchange of variables between controlunit and visualization is implemented via inter-face. The HMI panel is equipped with all rele-vant RT Ethernet and fieldbus systems.

Page 2: 32 Bit RISC processor 200 MHz IEC 61131-3 Programmable with CODESYS V3 … · 2017. 7. 3. · Programmable with CODESYS V3 acc.to IEC 61131-3 32 Bit RISC processor 200 MHz 4 MB program

Visual PLC5.7" display, EtherNet/IP™ - VT250 serie (Economy)VT250-57C-L7-IPM

Edi

tion

• 201

7-06

-25T

16:3

6:46

+02:

2 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Connection and pin assignment

Power SupplyNominal voltage 24 VDCNominal current 0.35 A

Pin Assignment

CAN / DeviceNet™ Fieldbus InterfacePluggable terminal strip, 5-pole

Pin Assignment

Ethernet Ports2 x RJ45 jackIntegrated switch10/100 Mbps

Pin Assignment

RS232 InterfaceSUB-D male connector, 9-poleAttention:Do not connect pins 1, 4, 6 and 9 when using RS232!

Pin Assignment

Page 3: 32 Bit RISC processor 200 MHz IEC 61131-3 Programmable with CODESYS V3 … · 2017. 7. 3. · Programmable with CODESYS V3 acc.to IEC 61131-3 32 Bit RISC processor 200 MHz 4 MB program

Visual PLC5.7" display, EtherNet/IP™ - VT250 serie (Economy)VT250-57C-L7-IPM

Edi

tion

• 201

7-06

-25T

16:3

6:46

+02:

3 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

USB InterfaceUSB deviceService interface

Pin Assignment