Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
General DescriptionThe MAX9652/MAX9653/MAX9654 are 3.3V, triple-channel, high-definition (HD) video-filter amplifiers.Specially designed for YPbPr component video signals,these devices are ideal for a wide range of set-top boxand portable applications. The inputs to the MAX9652/MAX9653/MAX9654 are AC-coupled. YIN has a sync-tip clamp while PBIN and PRIN have keyed clamps.The output buffer has gain of 2V/V and drives a stan-dard back-terminated 75Ω video load.
The passband of the MAX9654 is logic selectablebetween standard definition (SD) and high definition. TheMAX9652/MAX9653 have a fixed passband for HD video.The MAX9654 SD lowpass filter has ±1dB passband outto 8.5MHz and 57dB attenuation at 27MHz. TheMAX9652/MAX9653/MAX9654 HD lowpass filter have±1dB passband out to 42MHz and 50dB attenuation at109MHz.
The devices consume only 9.5mA per channel andoperate from a 3.3V supply. The MAX9653/MAX9654feature a low-power, 12µA shutdown mode. TheMAX9652/MAX9653/MAX9654 are specified over the-40°C to +125°C automotive temperature range.
Applications
Features♦ 9.5mA/Channel Supply Current
♦ Selectable Lowpass Filter for High-Definition orStandard-Definition Video Signals (MAX9654)
♦ 8.5MHz Standard-Definition Passband with 57dBAttenuation at 27MHz
♦ 42MHz High-Definition Passband with 50dBAttenuation at 109MHz
♦ 2V/V Gain
♦ 3.135V to 3.465V Single-Supply Operation
♦ 12µA Shutdown Mode (MAX9653/MAX9654)
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
________________________________________________________________ Maxim Integrated Products 1
19-4236; Rev 0; 8/08
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,or visit Maxim’s website at www.maxim-ic.com.
EVALUATION KITAVAILABLE
SD/HD3
0.1μF
MAX9652MAX9653MAX9654
GND
0.1μF
0.1μF
0.1μF
VDD
+3.3V
75Ω
75Ω
75Ω
YOUT
PBOUT
PROUT2V/V
2V/V
2V/VYIN
PBIN
PRIN
SHDN2
KEYEDCLAMP
KEYEDCLAMP
CLAMP
SD/HD3
SD/HD3
SD/HD1
CURRENTDAC
CURRENTDAC
CURRENTDAC
MPEG DECODER
1 MAX9654 ONLY.2 MAX9653 AND MAX9654 ONLY.3 FOR THE MAX9654, THE PASSBAND IS SELECTABLE BETWEEN SD AND HD. FOR THE MAX9652/MAX9653, THE PASSBAND IS HD.
Typical Application Circuit
Ordering InformationPART PIN-PACKAGE FILTER SHUTDOWN
MAX9652ASA+T 8 SO HD No
MAX9653AUB+T 10 µMAX HD Yes
MAX9654AUB+T 10 µMAX SD/HD Yes
Note: All devices are specified over the -40°C to +125°C oper-ating temperature range.
+Denotes a lead-free/RoHS-compliant package.
T = Tape and reel.Set-Top Boxes
DVD Players
HDTV
PVR
DVC
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS(VDD = 3.3V, VSHDN = VDD, VGND = 0, no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.
VDD to GND..............................................................-0.3V to +4VYIN, PRIN, PBIN to GND ............................-0.3V to (VDD + 0.3V)SHDN, SD/HD to GND..............................................-0.3V to +4VMaximum Current into Any Input Pin ................................±20mAOutput Short-Circuit Current Duration
to VDD or GND .......................................................ContinuousContinuous Power Dissipation (TA = +70°C)
8-Pin SO (derate 5.9mW/°C above +70°C)..................471mW10-Pin µMAX (derate 5.6mW/°C above +70°C) .............444mW
Operating Temperature Range .........................-40°C to +125°CJunction Temperature ......................................................+150°CStorage Temperature Range .............................-65°C to +150°CLead Temperature (soldering, 10s) .................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC CHARACTERISTICS
Supply Voltage Range VDD Guaranteed by PSRR 3.135 3.3 3.465 V
Quiescent Supply Current IDD No load 28.9 45 mA
Shutdown Supply Current SHDN = GND for MAX9653/MAX9654 12 20 µA
Input Voltage SHDN = GND for MAX9653/MAX96540.3 xVDD
VDD/30.36 xVDD
V
Input Resistance (YIN, PBIN,PRIN)
SHDN = GND for MAX9653/MAX9654 105 210 310 kΩ
INPUT
Y input 1.3Input Voltage Swing VSWING
Guaranteed byoutput voltage swing PB input, PR input 1
VP-P
YIN Sync Tip Clamp Level VCLP 0.28 0.34 0.4 V
YIN Input Clamping Current ICLP VYIN = VCLP + 0.5V 0.62 2.2 µA
Standard definition 0.3YIN Sync Crush
YIN sync-tip clamp% reduction in syncpulse from 0.3V;RSOURCE = 75Ω High definition 0.7
%
PBIN, PRIN Input Bias Level VBIAS 0.84 0.915 1 V
PBIN, PRIN Input Resistance Normal operation, VSHDN = VDD 20 kΩOUTPUT
Voltage Gain (Note 2) AV Guaranteed by output voltage swing 1.95 2 2.04 V/V
Gain Matching Guaranteed by output voltage swing -2 0 +2 %
Sync-tip clamp, YIN = unconnected,measured at YOUT
0.21 0.31 0.41 V
Output LevelPBIN = PRIN = unconnected, measured atPBOUT, PROUT
1.1 1.32 1.5 V
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
_______________________________________________________________________________________ 3
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
YOUT, RL = 150Ω toVVDD/2
YOUT, RL = 150Ω toGND
2.535 2.6 2.652
PBOUT, PROUT, RL= 150Ω to VVDD/2
Output Voltage Swing (Note 2)
3.135V ≤ VDD ≤3.465V, measured atoutput:VYIN = VCLP to (VCLP+1.3V),VPBIN = VPRIN =(VBIAS - 0.35V) to(VBIAS + 0.65V),VYIN = 1.3VP-P,VPRIN = VPRIN =1.0VP-P
PBOUT, PROUT, RL= 150Ω to GND
1.95 2.0 2.04
VP-P
Output ResistanceNormal operation; VSHDN = VDD forMAX9653/MAX9654
0.5 Ω
Output LeakageShutdown; VSHDN = GND for MAX9653/MAX9654; TA = +25°C
0.1 10 µA
Power-Supply Rejection Ratio 3.135V ≤ VDD ≤ 3.465V 40 57 dB
LOGIC INPUTS
Logic-Low Threshold VIL TA = +25°C0.3 xVDD
V
Logic-High Threshold VIH TA = +25°C0.7 xVDD
V
Logic-Input Current IIL/IIH VIN = GND to VDD; TA = +25°C 0.01 10 µA
HIGH DEFINITION
±1dB passband flatness 42 MHz
f = 30MHz 0.4
f = 50MHz -3High-Definition ReconstructionFilter
VIN = 1VP-P,reference frequencyis 1MHz f = 109MHz -50
dB
K2TTaken with Tektronix VM5000HD using astandard matrix signal
0.62 %
Nonlinearity 5-step staircase 0.71 %
Interchannel Time ErrorDifference in time between the 50% point ofthe output signals; VIN = 0.5VP-P, Y to Pband Y to Pr
1 ns
Group Delay Distortion 100kHz ≤ f ≤ 30MHz, VIN = 1VP-P 7 ns
ELECTRICAL CHARACTERISTICS (continued)(VDD = 3.3V, VSHDN = VDD, VGND = 0, no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS (continued)(VDD = 3.3V, VSHDN = VDD, VGND = 0, no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
f = 1MHz 1
f = 10MHz 1Interchannel Group DelayDistortion Error
VIN = 1VP-P; YOUT toPBOUT and YOUT toPROUT f = 30MHz 1
ns
Peak Signal to RMS Noise 100kHz ≤ f ≤ 30MHz 62 dBY channel 40
Power-Supply Rejection Ratio f = 1MHz, 200mVP-P Pb, Pr channels 30dB
Output Impedance f = 30MHz 16 Ω
Crosstalk from Any Active VideoOutput to Any Quiet Video Output
f = 30MHz, video input = 1VP-P -65 dB
STANDARD DEFINITION (MAX9654 Only)
±1dB passband flatness 8.5 MHz
f = 5.5MHz -0.15
f = 9.6MHz -3Standard-DefinitionReconstruction Filter
VIN = 1VP-P,reference frequencyis 100kHz f = 27MHz -57
dB
2T Pulse-to-Bar K Rating2T = 200ns, bar time is 18µs; the beginning2.5% and the ending 2.5% of the bar time isignored
0.15 K%
2T Pulse Response 2T = 200ns 0.2 K%
2T Bar Response2T = 200ns, bar time is 18µs; the beginning2.5% and the ending 2.5% of the bar time isignored
0.15 K%
Nonlinearity 5-step staircase 0.36 %
Interchannel Time ErrorDifference in time between the 50% point ofthe output signals; VIN = 0.5VP-P; Y to Pband Y to Pr
1 ns
Group Delay Distortion 100kHz ≤ f ≤ 5.5MHz +8.7 ns
f = 1MHz 1
f = 3.58MHz 1Interchannel Group DelayDistortion Error
VIN = 1VP-P; YOUT toPBOUT and YOUT toPROUT f = 4.43MHz 1
ns
Peak Signal to RMS Noise 100kHz ≤ f ≤ 5MHz 72 dB
Y channel 30Power-Supply Rejection Ratio f = 1MHz, 200mVP-P Pb, Pr channels 25
dB
Output Impedance f = 5MHz 3 Ω
Crosstalk from Any Active VideoOutput to Any Quiet Video Output
f = 4.43MHz, video input = 1VP-P -75 dB
Note 1: All devices are 100% production tested at TA = +25°C. Specifications over temperature limits are guaranteed by design.Note 2: Voltage gain (AV) is a two-point measurement in which the output voltage swing is divided by the input voltage swing.
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
_______________________________________________________________________________________ 5
SMALL-SIGNAL GAINvs. FREQUENCY
MAX
9652
toc0
1
FREQUENCY (MHz)
GAIN
(dB)
100101
-80
-60
-40
-20
0
20
-1000.1 1000
NORMALIZED TO 0dB
VIN = 0.1VP-P
HD
SD(MAX9654)
SMALL-SIGNAL GAIN FLATNESSvs. FREQUENCY
MAX
9652
toc0
2
FREQUENCY (MHz)
GAIN
(dB)
100101
-4
-3
-2
-1
0
1
2
3
-50.1 1000
NORMALIZED TO 0dB
VIN = 0.1VP-P
HD
SD(MAX9654)
LARGE-SIGNAL GAIN vs. FREQUENCY
MAX
9652
toc0
3
FREQUENCY (MHz)
GAIN
(dB)
100101
-80
-60
-40
-20
0
20
-1000.1 1000
NORMALIZED TO 0dB
VIN = 1VP-P
HD
SD(MAX9654)
LARGE-SIGNAL GAIN FLATNESSvs. FREQUENCY
MAX
9652
toc0
4
FREQUENCY (MHz)
GAIN
(dB)
100101
-4
-3
-2
-1
0
1
2
3
-50.1 1000
NORMALIZED TO 0dB
VIN = 1VP-PRL = 150Ω
HD
SD(MAX9654)
GROUP DELAYvs. FREQUENCY
MAX
9652
toc0
5
FREQUENCY (MHz)
DELA
Y (n
s)
100101
10
20
30
40
50
60
70
80
90
100
110
00.1 1000
HD
VIN = 0.1VP-P
SD(MAX9654)
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY
MAX
9652
toc0
6
FREQUENCY (MHz)
GAIN
(dB)
100101
-80
-60
-40
-20
0
20
-1000.1 1000
STANDARD DEFINITIONVDD = 3.3V + 200mVP-PMAX9654
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY
MAX
9652
toc0
7
FREQUENCY (MHz)
GAIN
(dB)
100101
-80
-60
-40
-20
0
20
-1000.1 1000
HIGH DEFINITIONVDD = 3.3V + 200mVP-P
SUPPLY CURRENTvs. TEMPERATURE
MAX
9652
toc0
8
TEMPERATURE (°C)
SUPP
LY C
URRE
NT (m
A)
925926-725.5
26.0
26.5
27.0
27.5
28.0
28.5
29.0
29.5
30.0
30.5
-40 125
VOLTAGE GAIN vs. TEMPERATUREM
AX96
52 to
c09
TEMPERATURE (°C)
GAIN
(V/V
)
925926-7
1.7
1.9
2.1
2.3
2.5
1.5-40 125
Typical Operating Characteristics(VDD = +3.3V, video outputs have RL = 150Ω connected to GND unless otherwise stated, VSHDN = VDD for MAX9653/MAX9654.)
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
6 _______________________________________________________________________________________
Typical Operating Characteristics (continued)(VDD = +3.3V, video outputs have RL = 150Ω connected to GND unless otherwise stated, VSHDN = VDD for MAX9653/MAX9654.)
100ns/div
2T PULSE RESPONSE (SD)
Y INPUT200mV/div
Y OUTPUT400mV/div
MAX9652 toc10
O
O
20ns/div
2T PULSE RESPONSE (HD)
Y INPUT200mV/div
Y INPUT400mV/div
MAX9652 toc11
O
O
4μs/div
2T BAR RESPONSE (SD)
Y INPUT200mV/div
Y OUTPUT400mV/div
MAX9652 toc12
O
O
2μs/div
2T BAR RESPONSE (HD)
Y INPUT200mV/div
Y INPUT400mV/div
MAX9652 toc13
O
O
OUTPUT IMPEDANCEvs. FREQUENCY
MAX
9652
toc1
4
FREQUENCY (MHz)
OUTP
UT IM
PEDA
NCE
(Ω)
80604020
8
16
24
32
40
48
56
64
72
80
00 100
CROSSTALKvs. FREQUENCY
MAX
9652
toc1
5
FREQUENCY (MHz)
GAIN
(dB)
100101
-100
-80
-60
-40
-20
0
20
-1200.1 1000
HIGH DEFINITION NONHOSTILEVIN-ACTIVE = 1V + 1VP-PVIN-INACTIVE = 0.9V
CROSSTALKvs. FREQUENCY
MAX
9652
toc1
6
FREQUENCY (MHz)
GAIN
(dB)
100101
-100
-80
-60
-40
-20
0
20
-1200.1 1000
STANDARD DEFINITION NONHOSTILEVIN-ACTIVE = 1V + 1VP-PVIN-INACTIVE = 0.9V
40ms/div
ENABLE TIME Y CHANNEL
SHDN2V/div
Y INPUT500mV/div
MAX9652 toc17
O
O
40ms/div
ENABLE TIME Pb CHANNEL
SHDN2V/div
PB OUTPUT500mV/div
MAX9652 toc18
O
O
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
_______________________________________________________________________________________ 7
40ms/div
ENABLE TIME Pr CHANNEL
SHDN2V/div
PR OUTPUT500mV/div
MAX9652 toc19
O
O
20ns/div
DISABLE TIME Y CHANNEL
SHDN2V/div
Y OUTPUT200mV/div
MAX9652 toc20
O
O
20ns/div
DISABLE TIME Pb CHANNEL
SHDN2V/div
PB OUTPUT1V/div
MAX9652 toc21
O
O
20ns/div
DISABLE TIME Pr CHANNEL
SHDN2V/div
PR OUTPUT1V/div
MAX9652 toc22
O
O
Typical Operating Characteristics (continued)(VDD = +3.3V, video outputs have RL = 150Ω connected to GND unless otherwise stated, VSHDN = VDD for MAX9653/MAX9654.)
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
Detailed DescriptionThe MAX9652/MAX9653/MAX9654 are HD video-filteramplifiers that operate from a 3.3V supply. They can beused to lowpass filter the signal after a video digital-to-analog converter (DAC) or before a video analog-to-digital converter (ADC). The inputs to the parts must beAC-coupled; the outputs can be AC- or DC-coupled.The average power consumption of the parts is signifi-cantly less than the average power consumption of the5V generation of HD video filter amplifiers. The quies-cent power consumption of the MAX9654 is 95mW, andthe average power consumption, which is defined whenthe parts drive a 150Ω load to ground with color bars, is200mW.
The MAX9652 is the simplest member of the family, withneither selectable SD/HD filters nor shutdown capabili-ty. This device is best suited for line-powered equip-ment such as set-top boxes, DVD players, and A/Vreceivers.
The MAX9653 has shutdown capability and is a naturalfit in portable equipment and line-powered equipmentin which standby power consumption is a concern. TheMAX9653 is also an option in SCART set-top boxes withanalog high-definition video outputs. In those designs,the same triple DAC typically generates both the stan-dard-definition RGB signals that are routed through theSCART device (refer to the MAX9598 data sheet) andthe high-definition YPbPr signals that are routedthrough the MAX9653. Only one signal set is output atany given time, and so the device connected to theunused outputs must be shut down.
The MAX9654 has both selectable SD/HD filters andshutdown capability. The applications of the MAX9654are similar to those of the MAX9653, but the MAX9654provides the additional capability to switch betweenstandard-definition and high-definition formats. TheMAX9654 has a passband (±1dB) of 42MHz for high-definition signals and a passband of 8.5MHz for stan-dard-definition signals.
InputsVideo signals must be AC-coupled into the MAX9652/MAX9653/MAX9654 using 0.1µF capacitors. An inputsync tip clamp sets the DC level for the luma signal atYIN. Keyed clamps on PBIN and PRIN set the DC biasof the color difference signals at PBIN and PRIN. Whenthe input sync tip clamp detects a sync pulse on theluma signal, it generates a signal that activates thekeyed clamps on PBIN and PRIN.
In shutdown mode, the inputs to the MAX9653 and theMAX9654 do not distort the video signal in case theoutputs of the video DAC are also connected to anothervideo circuit such as a dual SCART device. See theSCART Set-Top Box with Analog HD Outputs section.The inputs in shutdown mode are biased at VDD/3,which is sufficiently above ground so that the ESDdiodes never forward bias as the video signal changes.The input resistance in shutdown is 220kΩ which pre-sents negligible loading on the video current DAC.
HD Video FilterThe MAX9652/MAX9653/MAX9654 have a six-pole,Butterworth filter with a typical passband (±1dB) of
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
8 _______________________________________________________________________________________
Pin DescriptionPIN
MAX9652 MAX9653 MAX9654NAME FUNCTION
1 1 1 YIN Y Input
2 3 3 VDD Power Supply. Bypass VDD to GND with a 0.1µF capacitor.
3 4 4 PBIN Pb Input
4 5 5 PRIN Pr Input
5 6 6 PROUT Pr Output
6 7 7 PBOUT Pb Output
7 8, 9 8 GND Ground
8 10 10 YOUT Y Output
— 2 2 SHDNActive-Low Shutdown. Connect SHDN to VDD for normaloperation and to GND for low power consumption.
— — 9 SD/HDStandard-Definition/Active-Low High-Definition PassbandSelect (MAX9654)
42MHz, which is well beyond the 30MHz specificationfor high-definition video signals. The typical attenuationis 30dB at 74.25MHz, which is the sample clock rate forthe first generation of high-definition video DACs. Thetypical attenuation is 50dB at 109MHz, which is also apopular sample clock rate.
SD Video FilterThe MAX9654 has a six-pole Butterworth filter with atypical passband (±1dB) of 8.5MHz, which makes thedevice suitable for standard-definition video signalsfrom all sources (e.g., broadcast and DVD). Broadcastvideo signals are channel limited: NTSC signals have4.2MHz bandwidth and PAL signals have 5MHz band-width. Video signals from a DVD player, however, arenot channel limited, so the bandwidth of DVD video sig-nals can approach the Nyquist limit of 6.75MHz.Recommendation ITU-R BT.601-5 specifies 13.5MHz asthe sampling rate for standard-definit ion video.Therefore, the maximum bandwidth of the signal is6.75MHz. To ease the filtering requirements, most mod-ern video systems oversample by two times, clockingthe video current DAC at 27MHz. The typical attenua-tion is 57dB at 27MHz.
Video AmplifierThe output amplifiers have a fixed gain of 2V/V, andtheir rail-to-rail output stages are capable of driving
back-terminated 75Ω loads. The output load can beeither DC-coupled or AC-coupled, in which case, usean AC-coupling capacitor of at least 220µF.
The luma signal at YOUT swings between 0.3V and2.3V approximately. The color difference signals arecentered around 1.32V.
Short-Circuit ProtectionThe back-termination resistor in a typical applicationlimits the short-circuit current if an external short isapplied to the system. Additionally, the output ampli-fiers have built-in short-circuit protection to preventaccidental damage when the outputs are directly short-ed to either supply or ground for short times.
Digital ControlThe MAX9654 passband is selectable between SD andHD. Pulling SD/HD low results in an HD passband, andpulling SD/HD high results in a SD passband. TheMAX9652/MAX9653 have a fixed HD passband.
The MAX9653/MAX9654 feature a shutdown mode. PullSHDN high for normal operation. Pull SHDN low to put thedevices in shutdown, reducing quiescent current to 12µAtypically and placing the outputs in high impedance.
Applications InformationPower Consumption
The quiescent power consumption and average powerconsumption of the MAX9652/MAX9653/MAX9654 arelow because of the 3.3V operation. Quiescent powerconsumption is defined when the parts operate without aload. In this case, the MAX9652/MAX9653/MAX9654consume approximately 95mW. Average power con-sumption, which is defined when the MAX9652/MAX9653/MAX9654 drive a 150Ω load to ground withcolor bars, is about 200mW. Table 1 shows the powerconsumption with different HD video signals. The supplyvoltage is 3.3V. The outputs drive 150Ω loads to ground.
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
_______________________________________________________________________________________ 9
667kΩ
333kΩ
MAX9653MAX9654IN_
VDD
222kΩ MAX9653MAX9654IN_
VDD/3
Figure 1. (A) MAX9653/MAX9654 Input Circuit in ShutdownMode; (B) MAX9653/MAX9654 Equivalent Input Circuit inShutdown Mode
VIDEO SIGNAL POWER CONSUMPTION (mW)
All black screen 181
All white screen 209
Color bars 200
Table 1. Power Consumption of theMAX9652/MAX9653/MAX9654 withDifferent HD Video Signals
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4 SCART Set-Top Boxwith Analog HD Outputs
In set-top boxes with SCART connectors and cinchconnectors for high-definition YPbPr outputs, a triplevideo DAC usually outputs either standard-definitionRGB signals that are routed to the SCART device orhigh-definition YPbPr signals that are routed through ahigh-definition filter amplifier like the MAX9653 (Figure2). The set-top box devices have a limited number ofvideo DACs, and hence, one bank of triple video DACsswitches video format depending upon whether stan-dard-definition RGB or high-definition YPbPr signals arerequired.
When RGB signals are desired, the high-definition filteramplifier should be turned off so that the RGB signalsdo not appear on the YPbPr connectors. Similarly, whenYPbPr signals are desired, the RGB outputs of theSCART device should be muted or shut down. In eithercase, the inactive device cannot distort the video sig-nals generated by the DACs.
Power-Supply Bypassing and GroundThe MAX9652/MAX9653/MAX9654 operate from a sin-gle-supply voltage of 3.3V, allowing for low-power oper-ation. Bypass VDD to GND with a 0.1µF capacitor.Place all external components as close as possible tothe device.
Using a Digital SupplyThe MAX9652/MAX9653/MAX9654 are designed tooperate from noisy digital supplies. The high PSRR(50dB at 100kHz) allows the devices to reject the noisefrom digital power supplies. If the digital power supplyis very noisy and stripes appear on the televisionscreen, increase the supply bypass capacitance. Anadditional, smaller capacitor in parallel with the mainbypass capacitor can reduce digital supply noisebecause the smaller capacitor has lower equivalentseries resistance (ESR) and equivalent series induc-tance (ESL).
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
10 ______________________________________________________________________________________
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
______________________________________________________________________________________ 11
DAC
DAC
DAC
SET-TOP BOXCHIP
ENC_R/C_IN
ENC_G_IN
ENC_B_IN
MAX959875Ω
75Ω
75Ω
TV_R/C_OUT
TV_G_OUT
TV_B_OUT
MAX9653MAX9654
SCARTCONNECTOR
OFF
YPbPr OUTPUTS
A)
75Ω
75Ω
75Ω
YOUT
PBOUT
PROUT
YIN
PBIN
PRIN
SHDN
Figure 2. Triple DAC is connected to both a SCART device and a high-definition, video-filter amplifier. (A) SCART device is transmit-ting standard-definition RGB signals while the HD filter amplifier is in shutdown mode; (B) SCART device is not transmitting RGB sig-nals, but the HD filter amplifier device is transmitting high-definition YPbPr signals.
DAC
DAC
DAC
SET-TOP BOXCHIP
ENC_R/C_IN
ENC_G_IN
ENC_B_IN
MAX9598 75Ω
75Ω
75Ω
TV_R/C_OUT
TV_G_OUT
TV_B_OUT
MAX9653MAX9654
VDD
SCARTCONNECTOR
OFF
YPbPr OUTPUTS
B)
75Ω
75Ω
75Ω
YOUT
PBOUT
PROUT
YIN
PBIN
PRIN
SHDN
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
12 ______________________________________________________________________________________
SD/HD3
MAX9652MAX9653MAX9654
GND
VDD
+3.3V
YOUT
PBOUT
PROUT2V/V
2V/V
2V/VYIN
PBIN
PRIN
SHDN2
KEYEDCLAMP
KEYEDCLAMP
CLAMP
SD/HD3
SD/HD3
SD/HD1UNKNOWN
BIAS 300mV
1 MAX9654 ONLY.2 MAX9653 AND MAX9654 ONLY.3 FOR THE MAX9654, THE PASSBAND IS SELECTABLE BETWEEN SD AND HD. FOR THE MAX9652/MAX9653, THE PASSBAND IS HD.
Block Diagram
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
PBOUT
PROUTPRIN
1
2
8
7
YOUT
GNDVDD
PBIN
YIN
SO
TOP VIEW
3
4
6
5
MAX9652
1
2
3
4
5
10
9
8
7
6
YOUT
GND
GND
PBOUTPBIN
VDD
SHDN
YIN
MAX9653
μMAX
PROUTPRIN
1
2
3
4
5
10
9
8
7
6
YOUT
SD/HD
GND
PBOUTPBIN
VDD
SHDN
YIN
MAX9654
μMAX
PROUTPRIN
+ + +
Pin Configurations
Chip InformationPROCESS: BiCMOS
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
______________________________________________________________________________________ 13
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
14 ______________________________________________________________________________________
Package Information(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline informationgo to www.maxim-ic.com/packages.)
MA
X9
65
2/M
AX
96
53
/MA
X9
65
4
3.3V, HD/SD Triple-Channel Filter Amplifierswith Shutdown
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses areimplied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 15
© 2008 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
Package Information (continued)(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline informationgo to www.maxim-ic.com/packages.)
10LU
MA
X.E
PS
α
α