Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Symetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.com
APLICACIONES
Iglesias
Auditorios
Lugares públicos y de llamadas
Teleconferencias
Radio y TV Broadcast
Duplicación de cintas
421m
421m AGC-Nivelador
L 421M ES UN SOFISTICADO CONTROLADOR DE GANACIA, pero lo que hace essimple: hace más altos los sonidos bajos y más bajos los sonidos altos –como lo haría uningeniero con experiencia. Programe el nivel de salida deseado y el 421m suavemente
levantará las señales que caigan por debajo de dicho margen, como tambien bajará suavemente losque se levanten por arriba del mismo. La operación es automática, precisa, y completamentetransparente. El usuario decreta el rango de control y el 421m trabaja exactamente con dichasinstrucciones – automáticamente.
CARACTERISTICAS
Nivelador AGC
Limitador
Expansor descendiente con
Auto Threshold (marco
automático)
Entradas de linea y micrófono
125Hz y 6kHz filtro de curva de
habla (speach curve)
Indicador iluminado paralelo de
entrada y salida
Estereo si dos son unidos
En cualquier aplicación de audio donde laclaridad es importante usted se beneficiará conel 421m. Todos hablamos a diferentes niveles ytrabajamos a variadas distancias del micrófono.La claridad puede variar de persona a personay de momento a momento. Cómo poner a todoel mundo en el mismo nivel? Contratando a uningeniero.... o usando el 421m. El 421m estáequipado para procesar cualquier programa(para aplicaciones estereo dos 421m pueden serunidos). Niveles de programas desdesoundtracks, CD jukeboxes, o audio broadcastque suben y bajan impredeciblemente. El 421mlevanta o baja el nivel de audio suavemente ycomprime los altos niveles sin efectossecundarios. Su configuración flexible podrámanejar cualquier fuente de audio, desdemicrófonos de estudio a sistemas de llamada dealtavoz basadas en sistemas telefónicos.Sistemas de sonidos instalados, estudios degrabación, y broadcast se beneficiarán con laclaridad.
El 421m posee un control de gananciaautomática (AGC) que incorpora unamplificador nivelador que trabaja en conjuntocon un controlador de ratio (de proporción).Incrementando la proporción (ratio) en unamplificador de nivel hace que el programa seamas denso, pero el nivel de salida se mantendríaconstante sin importar el nivel de entrada.Traducción: esto significa que usted podríahablar a un metro del micrófono y tendrá elmismo volumen de salida que si hablara a
10 cm del mismo (y vice versa). Pararelacionarse con el sistema existente el 421mofrece un expansor descendiente que apaciguala salida cuando está ausente la señal deentrada. Un limitador pico provee protección alas bocinas en sistemas en vivo y previene lasobrecarga en sistemas de transmisiónboadcast. Por último filtros de curva de habla(speach curve) cambiables han sidoincorporados para optimizar el rango de voz.
Lo que hace diferente el 421m es cómo susciruitos reaccionan a situaciones reales. Diseñosanteriores de AGC creaban problemas ya queconfundían el ruido y feedback con el programade señal deseado, levantando el ruido ocortando las frases habladas muy bajas. Estosproblemas son eliminados con el sistema decircuitos "Auto Release Monitor", el cualinstantaneamente distingue la diferencia entrela señal real (musica y habla), y el ruido ófeedback.
El sistema de medición del 421m es la llave parala simple operación y programación. Las lucesdel penel de frente muestran la entradacomparada con la salida. Es rápidamentenotable cuándo el 421m agrega o sustraeganancia a la señal. No tendrá que adivinar yaque prodrá oír y ver el resultado de lanivelación.
Flexible, preciso y libre de problemas el controlautomático de ganancia siempre fue una buenaidea, ahora con el 421m de Symetrix es unarealidad a bajo costo. Llame ó acérquese a laoficina autorizada más cercana para másinformación sobre el 421m y cómo usarlo en supróximo proyecto. •
E
www.audiovias.com
Publication ©2000 Symetrix, Inc. Symetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.comSymetrix, Inc. • Lynnwood, WA USA • Tel 425-787-3222 • Fax 425-787-3211 • www.symetrixaudio.com
421m AGC-Leveler
The Automatic Gain Control (AGC) shall bea single channel model that reduces thedynamic range of wide range, widebandaudio signals, providing peak limiting,downward expansion and bandpasslimiting filters. The AGC shall occupy onerack space (1U).
The AGC shall be capable of controllingaudio signals ranging from -70 dBu to +24dBu and reducing their range by an input/output ratio ranging from 1:1 to 4:1. Theinput/output ratio shall be adjustable via afront-panel control. Response speedswitching shall be providedto accommodate speech and musicsources. A target output level control shallbe provided to shift the level of the outputsignal over a nominal ±20 dB range. Therelease time of the AGC shall be controlledby the presence of input signal and thesignal sensor shall be capable ofdiscriminating between music/speech andrandom noise or pure tones. The
421m ARCHITECTS AND ENGINEERS SPECIFICATIONS
SPECIFICATIONS
ConnectorsLine Inputs ¼" TRS jack and screw terminals,
20k Balanced BridgingMic Input XLR-female, 10k Balanced BridgingOutputs XLR-male, screw terminals, 200 Ohm Source
Impedance, Differentially Balanced, +23 dBm maximum levelTS phone, Unbalanced, +18 dBm maximum level
Bypass Relay controlled, hard-wire bypass in power off and bypass conditionsSidechain TRS phone, Unbalanced Send and Receive,
1000 Ohm Source Impedance, 10k Input ImpedanceTip=Receive, Ring=Send
Downward ExpanderRatio 1:2Threshold -50VU (bypass) to -20VU (Auto Threshold)Attack Time 1 msRelease Time Program dependant, 0.3 - 3.5 seconds
depending on amount and duration
AGC-LevelerRatio 1:1 to 4:1Auto Release Threshold -70 dBu to -30 dBuAttack Time approximately 1 msRelease Time Program dependant, 500 ms - 5 seconds
depending on amount and duration
Target OutputRange +20 dBPeak Limiter Ratio 10:1Threshold -15VU to +23VU (bypass)Attack Time 1 ms for 90% gain reductionRelease Time 0.8 seconds
Mic PreampGain Range +15 dB to +45 dBImpedance 10k OhmsMax Input Level +8 dBuTHD+Noise (gain control fully clockwise) -85 dBuPhantom Power 48V (±2)CMRR >80 dB (10 Hz - 20 kHz)
SonicsFrequency Response 20 to 50 kHz, +4 dBm (+0, -1 dB), (+0, -3 dB mic)Harmonic Distortion <0.05% 20 Hz to 20 kHz, +4 dBm, 30 kHz bandwidth
Typically <0.01% @ 1000 HzResidual Noise -90 dBu, 20 kHz noise bandwidth, rms responding meter
Speech CurveType Switch selected cutoff filters allow tailoring LF and/or HF
response for speech applicationsFrequencies LF=125 Hz, 12 dB/octave; HF=6 kHz, 24 dB/octave
Input/Output MeteringType LED Bar Graph, 12 steps + clipRange (min to max) 66 dBBallistics PeakCalibration 0 dB=0VU=+4 dBm=1.23V
PhysicalSize (hwd) 1.72 x 19 x 6.25 inches, 4.37 x 48.26 x 15.875 centimetersShipping Weight 7.4 lbs (3.4kg)
ElectricalConnector EC 3-polePower Requirements 115V AC, 60Hz, 10 watts
230V AC, 50 – 60Hz, 10 watts
to +12 VU (-50 dBu to +16 dBu). Anoutput clipping indicator shall be provided.
The AGC shall provide facilities for stereo-coupling two units via a shielded 5-pin DINmale-to-male cable. A front panel switchshall designate which unit is the masterand which unit is the slave.
The line level inputs shall be activebalanced bridging designs terminated with1/4" TRS female and screw terminals. Themic level input shall also be an activebalance bridging design using a three pinXLR female (AES/IEC standard wiring).The input circuitry shall incorporate RFIfilters. The outputs shall be active balanceddesigns having equal source impedancesand terminated with 3-pin XLR (AES/IECstandard wiring), and screw terminals. Aseparate 1/4" TRS jack shall provide anunbalanced output.
The balanced line level inputs shallaccommodate +24 dBu signals withoutdistortion, and the balanced outputs shallbe capable of delivering +23 dBm into a600-ohm load. The mic level input shallaccommodate +8dBu signals. There shallbe separate gain trim controls for the micand the line inputs and the mic input shallprovide 48v phantom power.
Overall frequency response shall be 20 Hzto 20 kHz, ±1dB, measured at +4 dBm
Specifications subject to change without notice.
threshold level of the signal sensor shallbe adjustable via a front panel control andthe presence of signals above thethreshold setting shall be indicated via agreen LED.
The AGC shall also contain an integralpeak limiter having at least a 10:1 ratio andadjustable threshold level. A green LEDindicator shall be provided to indicate peaklimiter activity. The peak limiter thresholdshall determine the absolute maximumoutput amplitude of the AGC-Levelerregardless of other conditions.
The AGC shall also contain an integraldownward expander having a 1:2expansion ratio with threshold and releasetime controls. Furthermore, the downwardexpander shall be capable of operatingautomatically via the signal sensorcircuitry. A green LED indicator shall beprovided to indicate downward expandercircuit activity.
Bandpass limiting filters shall be providedhaving a low-pass characteristic of 24 dB/octave at 6 kHz and a high-passcharacteristic of 12 dB/octave at 125 Hz.Both filters shall be capable of being usedindividually or simultaneously.
The AGC shall provide identical peakresponding input and output level meters.These meters shall be capable ofresponding to signals ranging from -54 VU
output. There shall be no more than0.02% harmonic distortion, measuredunder the following conditions: +4 dbuinput, +4 dBm output, BYPASS switchout, 1000 Hz. Residual noise output shallbe no greater than -90 dBm, measuredwith a 20 kHz noise bandwidth.
When the unit is inoperative (either byloss of power, or via the BYPASS switch),the inputs and outputs shall be wiredtogether. There shall be no transientstransmitted to the output terminals duringeither turn-on, turn-off, or bypassoperation.
Access to the AGC’s sidechain shall beprovided via a single 1/4" TRS femaleconnector. The ring connection shall bethe sidechain output and the tipconnection shall be the sidechain return.
The AGC shall be capable of operating bymeans of its own built-in power supplyconnected to 115V AC, 60Hz (230V AC,50 – 60Hz where applicable). The AGCshall be listed by UnderwritersLaboratories Inc. (UL) or other equivalentnationally recognized safety testingagency.
The unit shall be a Symetrix Incorporatedmodel 421m AGC-Leveler.421m
RÉFÉREZ TOUTE RÉPARATION À UN TECHNICIEN QUALIFIÉ.FABRIQUÉ AUX E.-U. PAR SYMETRIX INC., LYNNWOOD, WASHINGTON.
TYPICALCONNECTIONS
LYNNWOOD, WA, USAMANUFACTURED IN
POWER
==PIN3XLR
RINGPHONE
LOW(-)SIGNAL
==XLRPIN2
PHONETIP
SIGNALHIGH(+)
GROUNDSIGNAL
=SLEEVEPHONE
=PIN1XLR
GNDEARTH
GNDSIG
GNDSIG
BALANCED/UNBALANCED LINE OUTPUT
LEVELTRIMTRIM
BALANCED/UNBALANCED LINE INPUT
OFF+48V
PHANTOMCONNECT TO
SYMETRIX 421 ONLY!(NOT A MIDI CONNECTOR)
STEREO LINKBALANCED MICROPHONE INPUT
LEVEL
POWERMAXIMUM
AC INPUT20 WATTS
+50+250-10
421m AGC-LEVELER
www.audiovias.com