5150 Robot Systems - Lab-Volt · LabVolt Series Datasheet 5150 Robot Systems Festo Didactic en 220 V - 50 Hz 04/2018

LabVolt Series

Datasheet

Robot Systems

Festo Didactic

en 220 V - 50 Hz

06/2018

Robot Systems, LabVolt Series

2 © Festo Didactic

Table of ContentsGeneral Description_______________________________________________________________________2Equipment Utilization Chart ________________________________________________________________3Topic Coverage___________________________________________________________________________4Features & Benefits _______________________________________________________________________4List of Available Training Systems ___________________________________________________________4Additional Equipment Required to Perform the Exercises ________________________________________4Optional Equipment_______________________________________________________________________5Available Training Systems_________________________________________________________________6Equipment Description ____________________________________________________________________9Optional Equipment Description __________________________________________________________ 11

General DescriptionThe Robot System is a complete and affordable training program for the programming and operation of industrial robots. Through the curriculum and hands-on experience with the Robot System, students learn to create automated work cells.

The precision-built, articulated arm of the Robot represents an important step in automation and handling. A stepper motor, located in the base of the unit, provides horizontal rotation while five additional stepper motors, located in the shoulder, provide precision movements of the articulations and end effector.

The Robot has five axes of rotation plus a gripper and is able to use all joints simultaneously to perform a programmed move sequence. Each articulation can be controlled and moved independently. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-driven pulleys.

The Robot System is available in two models: the Robot System, Model 5150-1, and the Robot System with Teach Pendant, Model 5150-2. The Robot System, Model 5150-1, can be controlled and programmed from a host computer running the RoboCIM 5150 Software. The Robot System with Teach Pendant, Model 5150-2, includes all the equipment of the Robot System, Model 5150-1, with the addition of a teach pendant that can be used to control and program the Robot. Optional devices include a Magnetic Gripper, a Rotary Carousel, Belt Conveyors, Gravity Feeders, Pneumatic Feeders, and a Signal Tower.

The control/simulation software program – RoboCIM 5150 – provides students with a virtual environment and an easy-to-use interface allowing them to easily learn the fundamentals of robotics. The software gives students the opportunity to prepare their sequence within the 3D environment, simulate it, and then switch to control mode to perform the sequence with the real equipment.

Both models come with student and instructor manuals, user guides, all leads and cables required to operate the system, and a solid-metal perforated Work Surface that can be put atop a regular work table or installed on one of the optional benches.

Festo's modular approach allows connection with other equipment to further expand the training capabilities.


© Festo Didactic 3

The Robot and its optional external devices are equipped with location pins (or push-lock fasteners). These pins insert into the perforations of the metallic work surfaces. This easy-to-use mechanism ensures the accurate positioning of the equipment when repeating programs.

Equipment Utilization ChartThe following equipment is required to perform the practical sections of the included courseware. As the chart shows, some of the equipment is only required to perform particular units.

RoboCIM 5150 Software

Location pin on a Gravity Feeder

Robot Calibration Tools


4 © Festo Didactic

Topic Coverage• Introduction and Familiarization• Programming• Program Editing and Control Instructions• Industrial Activity Simulation

Features & Benefits• Training program that allows easy learning of robotics basics• Curriculum supported by a precision-built robot (six-step motor drives, two-finger gripper, power transferred from

the stepper motor to the joints through mini HTP timing belts, etc.)• Durable steel and aluminum construction that requires minimal maintenance• Includes a large base that allows the robot to stay in place on a regular work table• Provided with student and instructor manuals, user guides, and all required leads and cables• Color-coded input and output connection ports for ease of setup• Optional components allow the creation of personalized work cells• Control/simulation software that uses 3D representations to simulate and control the mechanical and electrical

characteristics of the equipment• Available Robotics System Software Development Kit intended for developers who are interested in developing their

own applications for the Robot System• Can be provided in an optional solid protective carrying case

List of Available Training Systems

Qty DescriptionModel number

1 Robot System _________________________________________________________________________ 5150-151 Robot System with Teach Pendant ________________________________________________________ 5150-25

Additional Equipment Required to Perform the Exercises


© Festo Didactic 5

1 Required only to perform Unit 6 (Optional Industrial Application 3) of the courseware.2 Required only to perform Units 8 and 9 (Optional Industrial Applications 5 and 6) of the courseware.3 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5121, 5122-A, or 5142-A.4 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5119, 5122-A, or 5142-A.5 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5119, 5121, or 5142-A. The Pneumatic Feeder Kit requires compressed air. The Air Compressor, Model 6410-C, is available in the Optional Equipment for this

purpose.6 Required only to perform Unit 7 (Optional Industrial Application 4) of the courseware. Alternately, this item can be replaced by Models 5119, 5121, or 5122-A. The Pneumatic Feeder Kit requires compressed air. The Air Compressor, Model 6410-C, is available in the Optional Equipment for this

purpose.7 Refer to the Computer Requirements in the System Specifications section of this datasheet if the computer is to be provided by the end-user.8 Optional product training. Price provided on demand. For details and options, contact [email protected] Additional software license for 1 user.


1 Rotary Carousel ________________________________________________________________________ 5113-101 Belt Conveyor _________________________________________________________________________ 5118-051 Gravity Feeder for Square Parts ___________________________________________________________ 5119-001 Gravity Feeder for Cylindrical Parts ________________________________________________________ 5121-001 Pneumatic Feeder Kit for Square Parts ____________________________________________________ 5122-A51 Pneumatic Feeder Kit for Cylindrical Parts __________________________________________________ 5142-A51 Personal Computer _____________________________________________________________________ 8990-051 Training on Computer-Controlled Robot System, 0.4 day _____________________________________ 34431-TF

Optional Equipment


1 Microswitch ___________________________________________________________________________ 5102-101 Magnetic Gripper _______________________________________________________________________ 5111-001 Storage Case __________________________________________________________________________ 5167-001 RoboCIM 5150 Software (International Market) - 1 User _______________________________________ 5173-P01 Robotics System Software Development Kit _________________________________________________ 5174-001 Belt Conveyor _________________________________________________________________________ 5210-051 Signal Tower Kit with Control Relay ________________________________________________________ 5924-B01 Storage/Work Surface __________________________________________________________________ 6309-001 Air Compressor ________________________________________________________________________ 6410-C51 Location Tray _________________________________________________________________________ 38685-001 Spacer ______________________________________________________________________________ 39035-001 Work Bench for 1 Work Surface __________________________________________________________ 46601-101 Work Bench for 2 Work Surfaces _________________________________________________________ 46601-201 Work Bench for 3 Work Surfaces _________________________________________________________ 46601-301 Square Part - Plexiglass ________________________________________________________________ 96474-001 Square Part - Wax _____________________________________________________________________ 96942-00

1

2

3

4

5

6

7

8

9


6 © Festo Didactic

Available Training Systems

Robot System5150-15

The Robot System provides complete and affordable training in the programming and operation of industrial robots. Through the curriculum and hands-on experience with the Robot System, students learn to create automated work cells. The Robot System can be controlled and programmed from a host computer running the RoboCIM 5150 Software.

The precision-built, articulated arm of the Robot represents an important

step in automation and handling. A stepper motor, located in the base of the unit, provides horizontal rotation while five additional stepper motors, located in the shoulder, provide precision movements of the articulations and end effector. The Robot has five axes of rotation plus a gripper and is able to use all joints simultaneously to perform a programmed move sequence. Each articulation can be controlled and moved independently. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-driven pulleys. The base of the unit includes one connector for an external stepper motor which can be used for further experimentation, such as operating the Rotary Carousel.

The Robot System comes with the RoboCIM 5150 Software which allows students to control or simulate the motion of the Robot. The software provides a three-dimensional, virtual environment and an easy-to-use interface allowing students to easily learn the fundamentals of robotics. This training system includes student and instructor manuals, user guides, all leads and cables required to operate the system, and a solid-metal perforated Work Surface that can be put atop a regular work table or installed on one of the optional benches.

Many optional devices can be added to the system to perform more complex tasks. The optional devices include a Magnetic Gripper, a Rotary Carousel, Belt Conveyors, Gravity Feeders, Pneumatic Feeders, and a Signal Tower.

List of Equipment


1 Work Surface - Large ___________________________________________________________________ 46604-001 Power Supply __________________________________________________________________________ 5105-051 Robot ________________________________________________________________________________ 5150-A0

List of Manuals

DescriptionManual number

RoboCIM 5150 Software (User Guide) _________________________________________________________ 39376-E0Introduction to Robotics (Student Manual) _____________________________________________________ 39411-00Introduction to Robotics (Instructor Guide) _____________________________________________________ 39411-10Robot System (User Guide) _________________________________________________________________ 39411-E0


© Festo Didactic 7

10 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact

"[email protected]".

Table of Contents of the Manual(s)

Introduction to Robotics (Student Manual) (39411-00)• 1-1 Control of the Robot, Using RoboCIM• 1-2 Control of the Robot, Using the Teach Pendant• 2-1 Programming, Using RoboCIM• 2-2 Programming, Using the Teach Pendant• 3-1 Program Editing, Using RoboCIM• 3-2 Program Editing, Using the Teach Pendant• 4-0 Industrial Application 1• 5-0 Industrial Application 2• 6-0 Industrial Application 3• 7-0 Industrial Application 4• 8-0 Industrial Application 5• 9-0 Industrial Application 6

Optional Equipment


1 Installation and Commissioning of a 5150-1 System ________________________________________ 51501-IC

System SpecificationsParameter Value

Physical Characteristics

Intended Location On a table able to support the weight of the equipment

Dimensions (H x W x D) 800 x 590 x 890 mm (31.5 x 23.2 x 35 in)

Net Weight TBE

Robot System with Teach Pendant5150-25

The Robot System provides complete and affordable training in the programming and operation of industrial robots. The Robot System with Teach Pendant includes all the equipment of the Robot System, Model 5150-1, with the addition of a teach pendant that can be used to control and program the Robot.

The precision-built, articulated arm of the Robot represents an important step in automation and handling. A stepper motor, located in the base of the unit, provides horizontal rotation while five additional stepper motors, located in the shoulder, provide precision movements of the articulations and end effector. The Robot has five axes of rotation plus a gripper and is able to use all joints simultaneously to perform a programmed move sequence. Each articulation can be controlled and moved independently. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-

10


8 © Festo Didactic

driven pulleys. The base of the unit includes one connector for an external stepper motor which can be used for further experimentation, such as operating the Rotary Carousel.

The Robot System comes with the RoboCIM 5150 Software which allows students to control or simulate the motion of the Robot. The software provides a three-dimensional, virtual environment and an easy-to-use interface allowing students to easily learn the fundamentals of robotics. This training system includes student and instructor manuals, user guides, all leads and cables required to operate the system, and a solid-metal perforated Work Surface that can be put atop a regular work table or installed on one of the optional benches.

Many optional devices can be added to the system to perform more complex tasks. The optional devices include a Magnetic Gripper, a Rotary Carousel, Belt Conveyors, Gravity Feeders, Pneumatic Feeders, and a Signal Tower.

List of Equipment


1 Work Surface - Large ___________________________________________________________________ 46604-001 Power Supply __________________________________________________________________________ 5105-051 Teach Pendant _________________________________________________________________________ 5106-001 Robot ________________________________________________________________________________ 5150-A0

List of Manuals


RoboCIM 5150 Software (User Guide) _________________________________________________________ 39376-E0Introduction to Robotics (Student Manual) _____________________________________________________ 39411-00Introduction to Robotics (Instructor Guide) _____________________________________________________ 39411-10Robot System (User Guide) _________________________________________________________________ 39411-E0

Table of Contents of the Manual(s)

Introduction to Robotics (Student Manual) (39411-00)• 1-1 Control of the Robot, Using RoboCIM• 1-2 Control of the Robot, Using the Teach Pendant• 2-1 Programming, Using RoboCIM• 2-2 Programming, Using the Teach Pendant• 3-1 Program Editing, Using RoboCIM• 3-2 Program Editing, Using the Teach Pendant• 4-0 Industrial Application 1• 5-0 Industrial Application 2• 6-0 Industrial Application 3• 7-0 Industrial Application 4• 8-0 Industrial Application 5• 9-0 Industrial Application 6

Optional Equipment


© Festo Didactic 9

11 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact

"[email protected]".


1 Installation and Commissioning of a 5150-2 System ________________________________________ 51502-IC

System SpecificationsParameter Value


Intended Location On a table able to support the weight of the equipment


Net Weight TBE

Equipment Description

Power Supply 5105-05

The Power Supply converts the ac line voltage into a 13.8-V dc voltage that is used to power the Robot, Model 5150-A. The Power Supply has current limiting and overvoltage protection.

SpecificationsParameter Value

Power Requirement

Service Installation Standard-single phase ac outlet

Current 2 A

Output 13.8 V – 10 A – DC

Protection Current limiting/overvoltage


Dimensions (H x W x D) 57 x 152 x 248 mm (2.3 x 6.0 x 9.8 in)

Net Weight 1.2 kg (2.7 lb)

11


10 © Festo Didactic

Teach Pendant 5106-00

The Teach Pendant is a hand-held terminal that can be used to control the Robot instead of using a computer. It has a four-line, twenty-character LCD display for feedback to the operator. The programs created with the Teach Pendant can be uploaded from (or downloaded to) a computer through a USB connection using the included 5150 File Server Application.





Robot 5150-A0

The Robot has five axes of rotation plus a gripper. It is driven by stepper motors that provide precision movements of the articulations. All joints can be used simultaneously to perform a programmed move sequence. Movements of the joints are accomplished by belts through a series of gears, while the gripper mechanism is activated by cables and belt-driven pulleys. The Robot comes with a large base which allows it to be placed on a regular work table.


Load Capacity 0.44 kg (15.6 oz)

Number of Axes of Rotational Freedom 5

Reach 432 mm (17 in)

Repeatability 3.2 mm (0.125 in)

Maximum Speed 152 mm/s (6 in/s)

Actuators

Type DC stepper motor


© Festo Didactic 11

Parameter Value

Number of steps per revolution 200

Transmission Gears and timing belts

Working Envelope

Base 338°

Shoulder Joint 181°

Elbow Joint 198°

Pitch Joint 185°

Roll Joint 360°

Power Input

Voltage 13.8 V – DC

Device Outputs

Number 4

Voltage 12 V – DC

Maximum Current 0.6 A

TTL Outputs

Number 4

Level 0-5 V – DC, TTL compatible

Maximum Current 0.02 A

End Effector Two-finger gripper


Dimensions (H x W x D) TBE


Work Surface - Large 46604-00

The Work Surface - Large is a perforated metal surface on which the equipment can be installed. The Work Surface can be put atop a regular work table or on one of the optional benches.





Optional Equipment Description

Microswitch (Optional) 5102-10

The Microswitch is an SPDT switch with a wireform actuator. The Microswitch can be used alone or can be installed on a belt conveyor.

Specifications



12 Optional product training. Price provided on demand. For details and options, contact [email protected].

Parameter Value

Switch

Type Momentary

Actuator Wireform

Contacts SPDT, 12 V - 0.06 A - DC

Magnetic Gripper (Optional) 5111-00

The Magnetic Gripper can be fixed to the wrist of the Robot in place of the two-finger gripper. The electromagnet is powered via the external device output connector mounted on the shoulder of the Robot. The Magnetic Gripper comes with a connection cable and an installation guide.

Manual


Magnetic Gripper Model 5111 (User Guide) ____________________________________________________ 93379-00



1 Training on Magnetic Gripper Model 5111 - Installation Instructions, 0.3 day ____________________ 93379-TF


Holding Force 0.9 kg (2 lb)


Magnet Diameter 19 mm (0.75 in)


Rotary Carousel (Optional) 5113-10

The Rotary Carousel is used to demonstrate how parts can be transferred to and from a robot in a repetitive, rotational pattern. Its platter is driven by a dc servo motor. The carousel has a closed loop feedback system and a limit switch feedback for hard home capabilities.

The operation of the Rotary Carousel is controlled by the Robot Controller.

12




Platter Diameter 298 mm (11.7 in)

Motor DC stepper motor

Switch

Type Momentary

Actuator Wireform

Contacts SPDT, 12 V – 0.06 A – DC




Belt Conveyor (Optional) 5118-05

The Belt Conveyor is used in material-handling experiments. It has a self-contained power supply and interface electronics. The control panel has inputs for interfacing with the Robot Controller. The inputs enable the conveyor to be remotely controlled. It can also be used as a stand-alone unit.

The Belt Conveyor comes with a movable limit switch to detect the presence of parts on the belt. The conveyor belt has a length of 1880 mm (74 in) and a width of 127 mm (5 in).


Motor DC stepper motor

Conveyor Belt

Length 959 mm (37.8 in)

Width 102 mm (4 in)

Inputs

Number 3 (to control motor operation, engage/disengage motors, direction)

Type TTL input

Switch (movable)

Type Momentary

Actuator Wireform



Dimensions (H x W x D) 165 x 965 x 260 mm (6.5 x 38 x 10.3 in)




Gravity Feeder for Square Parts (Optional) 5119-00

The Gravity Feeder for Square Parts is designed to feed square parts. It has a sensor switch and feedback cables for connection to the Robot Controller.


Storage Capacity 6 square parts

Part Characteristics

Dimensions 51 x 51 mm (2 x 2 in)

Thickness 13-38 mm (0.5-1.5 in)

Switch

Type Momentary

Actuator Wireform



Dimensions (H x W x D) 279 x 203 x 241 mm (11 x 8 x 9.5 in)


Gravity Feeder for Cylindrical Parts (Optional) 5121-00

The Gravity Feeder for Cylindrical Parts is designed to feed small cylindrical parts. It has a sensor switch and feedback cables for connection to the Robot Controller.


Storage Capacity 8 cylindrical parts

Parts Characteristics



Parameter Value

Dimensions (Length x Diameter) 51 x 35 mm (2 x 1.375 in)

Switch

Type Momentary

Actuator Wireform





Pneumatic Feeder Kit for Square Parts (Optional) 5122-A5

The Pneumatic Feeder Kit for Square Parts is designed to feed square parts and includes a pneumatic feeder and controller. It consists of storage and feeder sections and a pneumatic cylinder. Both sections have microswitches to send feedback to the Pneumatic Feeder Controller. When the Pneumatic Feeder Controller detects that the feeder section is empty, it supplies compressed air to the pneumatic cylinder to push a part from the storage section into the

feeder section.


Storage Capacity 10 square parts



Switch

Type Momentary

Actuator Standard-type, integral-hinged lever


Pneumatic Cylinder

Type Double-acting cylinder

Stroke 76 mm (3 in)

Bore Size 19 mm (0.75 in)






Pneumatic Feeder Kit for Cylindrical Parts (Optional) 5142-A5

This Pneumatic Feeder Kit for Cylindrical Parts is designed to feed cylindrical parts and includes a Pneumatic Feeder (Cylindrical Parts) and controller. It consists of storage and feeder sections and a pneumatic cylinder. Both sections have microswitches to send feedback to the Pneumatic Feeder Controller. When the Pneumatic Feeder Controller detects that the feeder section is empty, it supplies compressed air to the pneumatic cylinder to push a part from the storage section into the feeder section.


Storage Capacity 8 cylindrical parts


Dimensions (Length x Diameter) 63.5 x 19 mm (2.5 x 0.75 in)

Switch

Type Standard-type, integral-hinged lever

Actuator Momentary


Pneumatic Cylinder

Type Double-acting cylinder

Stroke 76 mm (3 in)

Bore Size 19 mm (0.75 in)




Storage Case (Optional) 5167-00

The Storage Case is a molded case designed to transport and protect the Robot System. The Storage Case is impact-resistant and its interior is padded with foam specially cut to match the Robot shape.



13 Optional product training. Price provided on demand. For details and options, contact [email protected] Optional product training. Price provided on demand. For details and options, contact [email protected].



Inner Dimensions (H x W x D) 241 x 673 x 381 mm (9.5 x 26.5 x 15 in)

Outer Dimensions (H x W x D) 254 x 699 x 406 mm (10 x 27.5 x 16 in)


RoboCIM 5150 Software (International Market) - 1 User (Optional) 5173-P0

The RoboCIM 5150 Software is used to simulate and control the operation of the Robot System, Model 5150, and optional external devices such as Gravity Feeders and Belt Conveyors. One of the key features of the RoboCIM 5150 Software is that it simulates the actual equipment with three-dimensional representations. Sophisticated mathematical models accurately simulate the mechanical and electrical characteristics of the equipment. The RoboCIM 5150

Software allows users to interactively control and view the motion of the system. Programs can be created with the RoboCIM 5150 Software to control the equipment using either the text programming mode or the icon programming mode.

Manual


RoboCIM 5150 Software (User Guide) _________________________________________________________ 39376-E0



1 Training on RoboCIM 5150 Software, 0.5 day ______________________________________________ 39376-TF1 Training on Introduction to Robotics, 0.6 day ______________________________________________ 39411-TF

13

14



Robotics System Software Development Kit (Optional) 5174-00

The Robotics System Software Development Kit (SDK) is intended for developers who are interested in developing their own applications for the Robot System. It includes a CD-ROM with all the files required to use the dynamic-link library (DLL) as an abstraction layer between the end-user application and the low-level communication protocol from and to the USB Controller. The Robotics System Software Development Kit comes with a User Guide giving the details of each function in the library. However, since the Robotics System Software Development Kit is intended for developers, no instructional material is provided.

Manual


5150 Robotics System Software Development Kit (User Guide) ____________________________________ 39644-E0


Computer RequirementsA currently available personal computer running under one of the following operating systems: Windows® 7 or

Windows® 8.

Belt Conveyor (Optional) 5210-05

The Belt Conveyor is used in material-handling experiments. It has a self-contained power supply and interface electronics. The control panel has inputs for interfacing with the Robot Controller. The inputs enable the conveyor to be remotely controlled. It

can also be used as a stand-alone unit. The Belt Conveyor comes with a movable limit switch to detect the presence of parts on the belt.


Motor

Type DC servo motor with closed-loop control

Encoder Optical



Parameter Value

Conveyor Belt

Length 1880 mm (74 in)

Width 127 mm (5 in)

Inputs

Number 3 (to control motor operation, engage/disengage motors, direction)

Type TTL Input

Switch (Movable)

Type Momentary

Actuator Wireform





Signal Tower Kit with Control Relay (Optional) 5924-B0

The Signal Tower Kit with Control Relay is one of the available external accessories for the Servo Robot, Model 5150. The signal tower consists of three lights displaying visual signals that indicate the Robot Controller states. Up to five light modules can be stacked one upon another. Each module can be programmed without the need for special wiring or tools. The DC Power Supply, Model 6360,

and Connection Leads, Model 5259-C, required to operate the Signal Tower, are included, as well as a Control Relay used to control external devices. It consists of a relay (12 V dc solenoid and DPDT contacts) and connecting cables.

Storage/Work Surface (Optional) 6309-00

The Storage/Work Surface is a perforated metal plate on which the equipment is placed. Two work surfaces can be joined using Spacers, Model 39035.



Dimensions (H x W x D) 30 x 590 x 590 mm (1 x 23 x 23 in)

Net Weight 5 kg (11 lb)



Air Compressor (Optional) 6410-C5

The Air Compressor is a quiet device well suited for classroom and school laboratories. The Air Compressor can be used to provide compressed air to different components. A conditioning unit, Model 6411-A, must be connected to the compressor for certain applications.

The Circulator Pump is available in different variants depending on ac power network voltages and frequencies. Because of this, the actual module may vary from the one shown in the picture.


Power Requirements

Current 3.4 A

Service Installation Standard single-phase ac outlet

Tank Capacity 30 L (6.6 gal)

Flow Rate 50 L/min at 620 kPa (1.8 SCFM at 90 psi)

Maximum Pressure 800 kPa (120 psi)

Noise Level 58 dB(A)


Dimensions (H x W x D) TBE

Net Weight 37 kg (81.6 lb)

Personal Computer (Optional) 8990-05

The Personal Computer consists of a desktop computer running under

Windows® 10. A monitor, keyboard, and mouse are included.

Specifications



Parameter Value

Power Requirements

Current 1.05 A

Service Installation Standard single-phase ac outlet

Location Tray (Optional) 38685-00

The Location Tray is a solid metal apparatus designed to help position square parts manipulated with the Servo Robot. When a part is dropped on the Location Tray it automatically aligns in the square-stamped center. The Location Tray is equipped with push-lock fasteners allowing it to clamp to the work surface.



Dimensions (H x W x D) 12.3 x 120 x 120 mm (0.5 x 4.7 x 4.7 in)

Net Weight 49 g (1.7 oz)

Spacer (Optional) 39035-00

The Spacer is a small metal piece with four push-lock fasteners that can be used to join two perforated work surfaces.




Net Weight 169 g (6 oz)



Work Bench for 1 Work Surface (Optional) 46601-10

The Work Benches, Models 46601-1, 46601-2, and 46601-3, are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavy-duty, swivelling, lockable casters. Optional equipment is available for each bench.



1 Work Surface - Large ___________________________________________________________________ 46604-00




Net Weight TBE

Work Bench for 2 Work Surfaces (Optional) 46601-20

The Work Benches, Models 46601-1, 46601-2, and 46601-3, are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavy-duty, swivelling, lockable casters. Optional equipment is available for

each bench.




Specifications



Parameter Value



Net Weight TBE

Work Bench for 3 Work Surfaces (Optional) 46601-30

The Work Benches, Models 46601-1, 46601-2, and 46601-3, are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavy-duty, swivelling, lockable casters. Optional equipment is available for each bench.







Net Weight TBE

Square Part - Plexiglass (Optional) 96474-00The Square Part - Plexiglass is a block of clear plexiglass used for various manipulations with the Servo Robot, Model 5250.



Dimensions (H x W x D) 13 x 51 x 51 mm (0.5 x 2 x 2 in)


Square Part - Wax (Optional) 96942-00The Square Part - Wax is a block of blue File-A-Wax used for various manipulations with the Servo Robot, Model 5250.



Dimensions (H x W x D) 13 x 51 x 51 mm (0.5 x 2 x 2 in)




Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification.

Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. © Festo Didactic Inc. 2018. All rights reserved.

Festo Didactic SE

Rechbergstrasse 373770 DenkendorfGermany

P. +49(0)711/3467-0F. +49(0)711/347-54-88500

Festo Didactic Inc.

607 Industrial Way WestEatontown, NJ 07724United States

P. +1-732-938-2000F. +1-732-774-8573

Festo Didactic Ltée/Ltd

675 rue du CarboneQuébec QC G2N 2K7Canada

P. +1-418-849-1000F. +1-418-849-1666

www.labvolt.com

www.festo-didactic.com

Documents

5150 Robot Systems - Lab-Volt · LabVolt Series Datasheet 5150 Robot Systems Festo Didactic en 220 V - 50 Hz 04/2018